Prove that there is a way to arrange all the dominoes in a cycle respecting the usual rules of the game using graph theory.

Answers

Answer 1

it’s possible to arrange all the dominoes in a cycle respecting the usual rules of the game using graph theory. u can represent each domino as a vertex in the graph, where each vertex has two edges connecting it to other vertices. By connecting the vertices in such a way that the edges match the numbers on the dominoes, create a cycle that includes all the dominoes. the cycle is known as an ‘Eulerian cycle’ it proves that it is possible to arrange all the dominoes in a cycle respecting the usual rules of the game.

Related Questions

Mr. Alberto Blanco is a 70 years-old widower. His wife of 44 years died two years ago. He has three sons aged 34, 38 and 41 and a daughter aged 43. He is a retired electrician. He lives alone in his own apartment. His relationship with his children is marked by a considerable degree of conflict. Mr. Blanco is currently hospitalized with gangrene of his right foot and lower leg. Problems with his foot began three years ago when he had an infection in one toe that became gangrenous. At that time it was discovered that he was diabetic. The toe was amputated. Last year he bruised his right foot while getting into a bus. The bruise developed into gangrene that resulted in an operation 6 months ago in which a portion of his right foot was amputated. At that time, an arterial bypass was done to decrease the likelihood that gangrene would recur. He went to a rehabilitation center where he remained for five months. Last week it was discovered that he had gangrene in the remainder of the right foot and part of the lower leg. He was readmitted to the hospital. He originally agreed to amputation of the leg but on the same morning the surgery was scheduled he verbally withdrew the consent. He discussed with some people the reason for his decision. He does not want to be a burden to his children. Mr. Blanco is discouraged by the failure of the earlier operations. He does not believe the operation will cure him and does not want to live as a dependent person or in a nursing home. Mr. Blanco assures that he does not fear death. Although quiet and stoic, he tends to be stubborn and somewhat irascible when pressured. Guide questions for case: Alberto Blanco 1. What are the ethical principles pertinent to this case? 2. Should Mr. Blanco have the right to refuse treatment even if the consequence may be that he will die? 3. Could he be seriously depressed and not mentally competent to make that decision? 4. May the doctor go ahead with the surgery, given the fact that Mr. Blanco had previously given his written consent for the procedure? 5. Would your decision be different if Mr. Blanco were refusing treatment for another condition such as terminal cancer or irreversible heart-failure?

Answers

Mr. Blanco has the right to refuse treatment, even if it means he will die. The doctor should respect Mr. Blanco's decision and engage in open and honest communication with him to understand his concerns.

1. The ethical principles pertinent to this case include autonomy, beneficence, non-maleficence, and respect for patient's wishes. Autonomy refers to Mr. Blanco's right to make decisions about his own healthcare. Beneficence and non-maleficence require the healthcare professionals to act in Mr. Blanco's best interest and do no harm. Respect for patient's wishes entails honoring his decision and preferences.

2. Yes, Mr. Blanco should have the right to refuse treatment even if the consequence may be that he will die. It is his autonomy and right to make decisions about his own body and medical treatment. As long as he is mentally competent, he has the right to make choices about his healthcare, even if they go against medical advice.

3. It is important to consider the possibility that Mr. Blanco may be seriously depressed and not mentally competent to make the decision. In such cases, a thorough evaluation of his mental capacity and emotional state should be conducted by healthcare professionals to ensure that he is able to make an informed decision. If he is found to lack mental competence, appropriate steps should be taken to protect his best interests.

4. Given that Mr. Blanco had previously given his written consent for the surgery but verbally withdrew it later, the doctor should respect his current decision. A patient's consent can be withdrawn at any time, and healthcare professionals should prioritize the patient's current wishes. It is essential to engage in open and honest communication with Mr. Blanco to understand his concerns and explore alternative options if available.

5. The decision may be different if Mr. Blanco were refusing treatment for another condition such as terminal cancer or irreversible heart failure. In such cases, the prognosis and potential outcomes may be different, and the balance between preserving life and respecting autonomy may shift. Each case should be evaluated individually, considering the patient's medical condition, prognosis, quality of life, and their values and preferences. Open discussions with the patient, their family, and the healthcare team are crucial in reaching the most ethically appropriate decision.

To know more about the heart failure refer here :

https://brainly.com/question/30292347#

#SPJ11

Pls help, question on picture, will do brainliest if right
no links!!!!!

Answers

sin = opposite/hypothenuse
Given opposite = 16
Hypothenuse = ?
Use Pythagorean theorem to find hypothenuse

12^2 + 16^2 = h^2
144 + 256 = h^2
h^2 = 400, h = 20

You know hypothenuse is 20
Opposite/hypothenuse

Solution: 16/20
Simplify if you need to (4/5)

Answer:

[tex]\boxed {\boxed {\sf sin(\theta)=\frac {16}{20}}}[/tex]

Step-by-step explanation:

We are asked to find the sine for the angle indicated. Remember that sine is equal to the opposite over the hypotenuse.

sin(θ)= opposite/hypotenuse

Analyze the triangle given. We have the 2 legs (16 and 12), but we do not have the hypotenuse (the longest side). We must solve for it.

Since this is a right triangle, we can use the Pythagorean Theorem.

[tex]a^2+b^2=c^2[/tex]

Where a and b are the legs and c is the hypotenuse. We know 16 and 12 are the legs.

[tex](16)^2+(12)^2=c^2[/tex]

Solve the exponents.

16²= 16*16=25612²= 12*12= 144

[tex]256+144=c^2[/tex]

[tex]400=c^2[/tex]

Since we are solving for c, we must isolate the variable. It is being squared, so we take the inverse: a square root.

[tex]\sqrt{400}=\sqrt{c^2} \\20=c[/tex]

Now we know the hypotenuse is 20. The side opposite of the angle θ is 16.

opposite= 16 hypotenuse=20

[tex]sin (\theta)= \frac {opposite}{hypotenuse} \\sin (\theta)= \frac{16}{20}[/tex]

The sine of the angle is equal to 16/20. This can be reduced to 4/5 if necessary (by dividing the numerator and denominator by 4).

If we were to make a poset of the form (A, |), where is the symbol for divisibility, which of the following sets A would yield a poset that is a total ordering? O A- (1, 4, 16, 64) O A- (1.2,3, 4, 6, 12) O A 1,2,3, 4, 6, 12, 18, 24) OA+{1 , 2, 3, 6, 12)

Answers

The sets A {1.2,3,4,6,12}, A{1,2,3,4,6,12,18,24}, and A{1,2,3,6,12} all yield a poset that is a total ordering.

In order for a partially ordered set (poset) to be a total order, every pair of elements must be comparable, i.e., for every pair of elements x, y in A, either x | y or y | x must be true.

Therefore, we should choose a set A that satisfies this condition.Let us consider each set in turn:(1, 4, 16, 64)This set contains powers of 4, which are not all divisible by each other.

For example, 16 | 64, but 16 does not divide 4.

Hence, this set is not a total order.{1.2,3, 4, 6, 12}In this set, 1 divides every other element, so it satisfies the condition for being a total order. Therefore, this set yields a poset that is a total order.

(1, 2, 3, 4, 6, 12, 18, 24)This set has the same elements as the previous set, plus some more. Hence, it also satisfies the condition for being a total order.

Therefore, this set yields a poset that is a total order.{1 , 2, 3, 6, 12}In this set, 1 divides every other element, 2 divides 6 and 12, and 3 divides 6 and 12.

Therefore, it satisfies the condition for being a total order.

Hence, this set yields a poset that is a total order.In conclusion, the sets A {1.2,3,4,6,12}, A{1,2,3,4,6,12,18,24}, and A{1,2,3,6,12} all yield a poset that is a total ordering.

Know more about poset here,

https://brainly.com/question/31920203

#SPJ11

Please help ASAP!
Find the area of the figure.
Number 5.

Answers

Answer:

70 ft squared

Step-by-step explanation:

Separate into rectangle and triangle then add the found areas together for total area.

rectangle...

10×4=40

triangle...

[tex] \frac{bh}{2} = [/tex]

(12×5)/2=

60/2=30

add area for rectangle and triangle...

40+30=70

we compute the deviation of the second observation in the data set from the mean, and find that the result is a negative number. this tells us that

Answers

When we compute the deviation of the second observation in the data set from the mean, and find that the result is a negative number, this tells us that there is good reason to use the median as opposed to the mean as a measure of central tendency.

Computing the deviation

In computing deviations, it is important to note that extremely skewed deviations can increase the normal distributions and make it difficult to use the standard deviation as a measure of central tendency.

So, when the deviation of the second observation is a negative number, the distribution will be affected and it may become better to use the median as a measure of central tendency.

Learn more about deviations here:

https://brainly.com/question/24298037

#SPJ4

Complete Question:

We compute the deviation of the second observation in the data set from the mean, and find that the result is a positive number. This tells us that:

there is a positive overall skewness in the data set.

there is good reason to use the median as opposed to the mean as a measure of central tendency.

the first deviation must also be positive.

the second observation is greater than the sample average.

If the ratio of shirts to jeans is 5 : 3 and the no. of shirts are 15, what is the no. of jeans?

Answers

Answer:

Step-by-step explanation:

let x be number of jeans

3/5 = x/15

x=(3/5)15

x=9

Answer:

9 jeans

Step-by-step explanation:

The 5 part of the ratio relates to 15 shirts , then

15 ÷ 5 = 3 ← value of 1 part of the ratio , then

3 parts = 3 × 3 = 9 ← number of jeans

assume that in blackjack, an ace is always worth 11, all face cards (jack, queen, king) are worth 10, and all number cards are worth the number they show. given a shuffled deck of cards:

Answers

a) Probability of drawing two cards summing to 21: 1/331

b) Probability of drawing two cards summing to 10: 28/1326

c) Probability of drawing a third card to make the sum strictly larger than 21: 2/25

a) To calculate the probability of drawing two cards that sum to 21, we need to determine the number of favorable outcomes and the total number of possible outcomes.

There are four ways to get a sum of 21 with two cards: drawing an Ace and a face card (4 possibilities).

The total number of possible outcomes is given by the combination of choosing two cards from a deck of 52 cards, which is C(52, 2) = 1326.

Therefore, the probability of drawing two cards that sum to 21 is 4/1326, which simplifies to 1/331 or approximately 0.0030.

b) To calculate the probability of drawing two cards that sum to 10, we need to determine the number of favorable outcomes.

There are several combinations that sum to 10: drawing a 4 and a 6, drawing a 5 and a 5, drawing a 6 and a 4, and drawing a face card and a 10.

The total number of possible outcomes remains the same, which is 1326.

Therefore, the probability of drawing two cards that sum to 10 is (4 + 4 + 4 + 16)/1326, which simplifies to 28/1326 or approximately 0.0211.

c) Given that you have already drawn the 10 of clubs and the 4 of hearts, the sum of these two cards is 10 + 4 = 14.

To find the probability that the sum of all three cards is strictly larger than 21, we need to consider the remaining cards in the deck. Since there are 50 cards left in the deck, we calculate the probability of drawing a card that makes the sum exceed 21.

The only way to exceed 21 is to draw an Ace, which is worth 11. There are four Aces in the deck.

Therefore, the probability of drawing a card that makes the sum strictly larger than 21 is 4/50, which simplifies to 2/25 or approximately 0.08.

Complete question:

Assume that in blackjack, an ace is always worth 11, all face cards (jack, queen, king) are worth 10, and all number cards are worth the number they show. given a shuffled deck of cards:

a) What is the probability that you draw two cards and they sum 21

b) What is the probability that you draw two cards and they sum 10

c) Suppose, you have drawn two cards: 10 of clubs and 4 of hearts. You now draw a third card from remaining 50. What is the probability that the sum of all three cards is strictly larger than 21?

To know more about Probability, refer here:

https://brainly.com/question/32117953

#SPJ4

What is the result of subtracting the second equation from the first ? -7x-y=0 and 7x+8y=-6

Answers

Answer:

- 14x - 9y = 6

Step-by-step explanation:

- 7x - y = 0 → (1)

7x + 8y = - 6 → (2)

Subtracting (2) from (1) term by term

- 7x - 7x - y - 8y = 0 - (- 6)

- 14x - 9y = 0 + 6

- 14x - 9y = 6

Mr. Hart asked students to find the volume of the triangular prism below. Which student wrote the correct expression for the value of B, the area of the base?

Answers

Answer:

Omar

Step-by-step explanation:

Given

See attachment for prism

Required

Whose expression is correct

The base of the attached prism is a triangle that has the following dimension.

[tex]Base =7cm[/tex]

[tex]Height = 24cm[/tex]

So, the area is:

[tex]Area = \frac{1}{2} * Base * Height[/tex]

[tex]Area = \frac{1}{2} * 7 * 24[/tex]

Comparing the expressions of Omar and Kari, we can conclude that Omar is correct

How many 6-digit numbers are there in all?

Answers

Answer:

900,000 6

∴ there are 900,000 6-digit numbers in all.

Consider a random sample from a normally distributed population of large size. i. If the population variance o2 = 35, what sample size is needed to estimate the mean within +2 with 99% confidence? ii. If instead we would like to estimate some true proportion, what sample size is needed to estimate the true proportion within 22% with 99% confidence? Now consider a random sample from a population of large size with unknown distribution. iii. If the population variance o2 50, what sample size is needed to estimate the mean within +1 with 95% confidence (using the 22.5% value)? iv. Why is it the case that such estimating process is still legitimate?

Answers

i. a sample size of 138 is needed to estimate the mean within +2 with 99% confidence. Sample size needed: 138

ii. Sample size needed: 342

iii. Sample size needed: 193

iv. Estimating process is legitimate due to the Central Limit Theorem.

What is normal distribution?

Normal distribution, also known as the Gaussian distribution or bell curve, is a continuous probability distribution that is symmetric and characterized by its mean and standard deviation.

i. To estimate the mean within +2 with 99% confidence, we can use the formula for the sample size needed for estimating the population mean:

[tex]n = (Z * \sigma / E)^2[/tex]

Where:

n = sample size

Z = Z-score corresponding to the desired confidence level (99% confidence corresponds to a Z-score of approximately 2.576)

σ = population standard deviation (given as √35 since [tex]o^2[/tex] = 35)

E = maximum error tolerance (+2 in this case)

Substituting the values into the formula:

[tex]n = (2.576 * \sqrt{35} / 2)^2 = 137.13[/tex] (approx)

Since the sample size needs to be a whole number, we round up to the nearest integer. Therefore, a sample size of 138 is needed to estimate the mean within +2 with 99% confidence.

ii. To estimate the true proportion within 22% with 99% confidence, we can use the formula for the sample size needed for estimating the population proportion:

[tex]n = (Z^2 * p * (1 - p)) / E^2[/tex]

Where:

n = sample size

Z = Z-score corresponding to the desired confidence level (99% confidence corresponds to a Z-score of approximately 2.576)

p = estimated proportion (0.5 is commonly used for unknown proportions)

E = maximum error tolerance (22% in this case, which is 0.22)

Substituting the values into the formula:

[tex]n = (2.576^2 * 0.5 * (1 - 0.5)) / 0.22^2 = 341.28[/tex]

Since the sample size needs to be a whole number, we round up to the nearest integer. Therefore, a sample size of 342 is needed to estimate the true proportion within 22% with 99% confidence.

iii. When the population variance [tex]o^2[/tex] is unknown, we can use the t-distribution instead of the Z-distribution for estimating the mean. The formula for the sample size needed for estimating the population mean with an unknown variance is:

[tex]n = (t * \sigma / E)^2[/tex]

Where:

n = sample size

t = t-score corresponding to the desired confidence level and degrees of freedom (in this case, for 95% confidence and a large sample size, t can be approximated as 1.96)

σ = estimated standard deviation (given as √50 since [tex]o^2[/tex] = 50)

E = maximum error tolerance (+1 in this case)

Substituting the values into the formula:

[tex]n = (1.96 * √50 / 1)^2 = 192.08[/tex]

Since the sample size needs to be a whole number, we round up to the nearest integer. Therefore, a sample size of 193 is needed to estimate the mean within +1 with 95% confidence using the 22.5% value.

iv. The estimating process is still legitimate in this case because the sample size is large and the Central Limit Theorem applies. The Central Limit Theorem states that for a large enough sample size, the sampling distribution of the mean (or proportion) will be approximately normally distributed, regardless of the shape of the population distribution. This allows us to make inferences about the population mean or proportion using sample statistics. Additionally, the use of the t-distribution accounts for the uncertainty introduced by using the sample standard deviation instead of the population standard deviation.

To know more about Central Limit Theorem, refer here:

https://brainly.com/question/898534

#SPJ4

Find the total surface area of the rectangular prism

Answers

Answer:

124

Step-by-step explanation:

To find the surface area, we add the area from all faces or the prism.

the first face, we can put 8 times 2.5, which is 20. There are two of these faces, so we have 40 in our area so far.

next the other face. 4 times 2.5 is 10, and there are two of these faces. 60 in out area.

now the top and bottom faces. 8 times 4 is 32. there are two of these faces, and 60 +64 = 124

11. Michelle used place value to multiply 4,126 and 87. Which is not a step that Michelle could have
taken in her work?
A Multiply 4,126 x 7
B. Multiply 4,126x8
C. Multiply 4,126 x 8 tens
D. Add 28.882 330,080

Answers

Answer:

Step-by-step explanation:

B is the correct answer

*
4. HINT: Remember the "square" means 90 degrees
25 points
The circle with center O has a circumference of 36 units. What is
the length of minor arc AC?
A. 9 units
B. 12 units
C. 18 units
D. 36 units

Answers

The answer is photo
Have a great day!!!

Suppose the learning activity by Teacher Thato and all the three assessment of learning activities by the student teachers captures the entire learning experience of Teacher Thato's learners. Discuss the extent to which Teacher Thato's learners were exposed to opportunities for achieving mathematical proficiency (Kilpatrick, Swafford & Findell, 2001).

Answers

If the activities and assessments were designed to facilitate learning and encourage higher-order thinking skills, learners were exposed to opportunities for achieving mathematical proficiency (Kilpatrick, Swafford & Findell, 2001).

The teaching and learning process revolves around assessing the level of knowledge students have and guiding them to achieve specific goals.

The role of assessments in the classroom is to measure students' understanding of the taught content and to provide feedback to the teacher on areas where improvement is required.

Suppose the learning activity by Teacher Thato and all the three assessment of learning activities by the student teachers captures the entire learning experience of Teacher Thato's learners.

The extent to which Teacher Thato's learners were exposed to opportunities for achieving mathematical proficiency depends on the effectiveness of the teaching and learning process.

Mathematical proficiency is the knowledge and skills that learners gain through regular interactions with mathematical concepts.

Mathematical proficiency means understanding mathematics as well as being able to apply mathematical knowledge in real-world scenarios.

Therefore, if Teacher Thato's learning activities and assessment methods were designed to provide learners with opportunities to apply mathematical concepts to real-world problems, then they were exposed to opportunities for achieving mathematical proficiency (Kilpatrick, Swafford & Findell, 2001).

Similarly, if the activities and assessments required learners to engage in critical thinking, problem-solving, and other higher-order thinking skills, then it's possible that learners were exposed to opportunities for achieving mathematical proficiency (Kilpatrick, Swafford & Findell, 2001).

In summary, if the activities and assessments were designed to facilitate learning and encourage higher-order thinking skills, learners were exposed to opportunities for achieving mathematical proficiency (Kilpatrick, Swafford & Findell, 2001).

To know more about mathematical proficiency, visit:

https://brainly.com/question/32442803

#SPJ11

please help i have a test tomorrow

Answers

Answer:

Step-by-step explanation:

remember length times width equals area

241.78 divided by (-3.85)

Answers

Answer:

-62.8 is the Answer fot the equation, Hope this helped

if y=4x^2 −3 , what is the minimum value of the product \displaystyle xyxy ?

Answers

The minimum value of the product xyxy is -9, obtained when y equals -3.

To find the minimum value of the product xyxy, we need to first determine the minimum value of the expression y = 4x² - 3.

The given expression is a quadratic equation in the form of y = ax² + bx + c, where a = 4, b = 0, and c = -3.

To find the minimum value, we need to determine the x-coordinate of the vertex of the parabola, which corresponds to the minimum point.

The x-coordinate of the vertex can be found using the formula: x = -b / (2a).

In this case, b = 0 and a = 4, so the x-coordinate of the vertex is x = -0 / (2 × 4) = 0.

Substituting the x-coordinate back into the equation y = 4x² - 3, we can find the minimum value of y.

y = 4(0)² - 3 = -3.

Therefore, the minimum value of y is -3.

To find the minimum value of the product xyxy, we can substitute the minimum value of y (-3) back into the expression:

xyxy = x × (-3) × x × (-3) = -9x².

Since the coefficient is negative, the minimum value of the product xyxy is -9.

Hence, the minimum value of the product xyxy is -9.

Learn more about the minimum value of the product at

https://brainly.com/question/29461549

#SPJ4

What’s the answer???

Answers

9 stickers on as heyy

Answer:

10 stickers on one sheet

Step-by-step explanation:

96 - 16 ÷ 8 =

80 ÷ 8 = 10

have a nice day! :)

Given that the point P(6.-7) lies on the line 6x + ky = -20, find k Need Help? Let p be the function defined by g(x) = -x2 + Bx. Find g(a + h), g(-a), g(sqrt a) a + g(a), and 1/g(a)

Answers

The required solutions are:

[tex]g(a + h) = -(a + h)^2 + B(a + h)[/tex]

[tex]g(-a) = -(-a)^2 + B(-a)[/tex]

[tex]g(\sqrt{(a)}) = -(\sqrt{(a)})^2 + B(\sqrt{(a)})[/tex]

[tex]a + g(a) = a + (-a^2 + Ba)\\[/tex]

[tex]1/g(a) = 1/(-a^2 + Ba)[/tex]

To find the value of k, we can substitute the coordinates of the point P(6, -7) into the equation of the line and solve for k.

Given: P(6, -7) and the line equation 6x + ky = -20

Substituting the x and y values of P into the equation, we have:

6(6) + k(-7) = -20

36 - 7k = -20

Now, let's solve for k:

-7k = -20 - 36

-7k = -56

k = (-56)/(-7)

k = 8

Therefore, the value of k is 8.

To solve the second part of your question, let's work with the function [tex]g(x) = -x^2 + Bx.[/tex]

1. g(a + h):

Substitute (a + h) into the function:

[tex]g(a + h) = -(a + h)^2 + B(a + h)[/tex]