Answer:
P = 450 J
Explanation:
Given that,
Mass of a child, m = 18 kg
The vertical distance from the top to the bottom of the slide is 2.5 metres.
The Gravitational field strength = 10 N/kg
We need to find the decrease in gravitational potential energy of the child sliding from the top to the bottom of the slide.
The formula for the gravitational potential energy is given by :
P = mgh
Substituting all the values,
P = 18 kg × 10 m/s² × 2.5 m
P = 450 J
Hence, the decrease in gravitational potential energy is 450 J.
A tractor trailer truck traveling at a speed of 105 feet/second skids to a stop in 12 seconds. Determine the skidding distance of the truck.
Please help.
Answer:
1260ft
Explanation:
Given parameters:
Speed = 105ft/s
Time = 12s
Unknown:
Skidding distance of the truck = ?
Solution:
To solve this problem:
Distance = speed x time
Now insert the parameters and solve;
Distance = 105 x 12 = 1260ft
A wire of resistance R is cut into ten equal parts which are then connected in parallel. The equivalent resistance of the combination is
Answer:
The equivalent resistance of the combination is R/100
Explanation:
Electric Resistance
The electric resistance of a wire is directly proportional to its length. If a wire of resistance R is cut into 10 equal parts, then each part has a resistance of R/10.
Parallel connection of resistances: If R1, R2, R3,...., Rn are connected in parallel, the equivalent resistance is calculated as follows:
[tex]\displaystyle \frac{1}{R_e}=\frac{1}{R_1}+\frac{1}{R_2}+\frac{1}{R_3}+...+\frac{1}{R_n}[/tex]
If we have 10 wires of resistance R/10 each and connect them in parallel, the equivalent resistance is:
[tex]\displaystyle \frac{1}{R_e}=\frac{1}{R/10}+\frac{1}{R/10}+\frac{1}{R/10}...+\frac{1}{R/10}[/tex]
This sum is repeated 10 times. Operating each term:
[tex]\displaystyle \frac{1}{R_e}=\frac{10}{R}+\frac{10}{R}+\frac{10}{R}+...+\frac{10}{R}[/tex]
All the terms have the same denominator, thus:
[tex]\displaystyle \frac{1}{R_e}=10\frac{10}{R}=\frac{100}{R}[/tex]
Taking the reciprocals:
[tex]R_e=R/100[/tex]
The equivalent resistance of the combination is R/100
Your best friend comes to you with a problem: He is not doing well in school because he has too much going on after school. He wants to improve his grades without giving up his after-school activities. What are the three general time-management techniques that you can suggest to him?
Answer:
1. Schedule your activities
2. Prioritize the more important tasks
3. Avoid procrastination
Explanation:
Time-management techniques are strategies or methods developed by people to help them effectively manage their time. My best friend in the scenario above cannot effectively manage his time because he has a lot of activities crowding up his time.
To get better in his grades, he should strike a balance between school work and extracurricular activities. He should make a workable schedule where only the most important tasks are prioritized. He should also learn to execute these tasks on time without postponing them.
Answer:
Sample Response: He should decide on a study time that works best for him, create a study schedule, and manage his study sessions by using a daily to-do list
Explanation:
got it right on edge 2021
What is everything in our physical environment made of? *
A matter
B solids
C gases
Answer: matter
Explanation:
What will be the average velocity of a body falling in free fall on Earth for 3 s?
Answer:
29.4m/s
Explanation:
Given parameters:
Time = 3s
Unknown:
Average velocity = ?
Solution:
To solve this problem, we use the expression below:
v = u + gt
v is the average velocity
u is the initial velocity = 0m/s
g is the acceleration due to gravity = 9.8m/s²
t is the time
So;
v = 0 + (9.8 x 3) = 29.4m/s
this is an area where two tectonic plates move towards each other with one going under the other plate?
Answer:Convergent boundaries are areas where plates move toward each other and collide. These are also known as compressional or destructive boundaries. Subduction zones occur where an oceanic plate meets a continental plate and is pushed underneath it. Subduction zones are marked by oceanic trenches.
pLS THANK ME AND VOTE ME BRAINLIEST ME
Explanation:
When wax is heated, it turns into a liquid. How are the wax molecules affected by this change of state?
The molecules gain energy
The molecules lose energy
The molecules move closer to one another
The space between the molecules increase
The space between the molecules decrease
Answer:
the CORRECT answer is the "molecules gain energy" because with heating comes energy transferring into the wax molecules. and "the space between the molecules increases" because the molicules will want to space apart because of the heat
Explanation:
Answer: the molecules gain energy, The space between the molecule increases
Explanation:
i got the sauce (plato)
A bus traveled at a constant speed of 80 km/h. How long did it take the bus to travel 40 km?
Answer:
1/2 hours
Explanation:
The formula for speed is given as;
s= d/ t -----where
s is speed , 80 km/h
d is distance , 40 km
t is time = ?
Making t is subject of the formula;
t= d/s
Using the values given
t= 40 / 80
t= 1/2 hours
a car covers at speed of 50m/s. how far it travels in 5 minutes
Answer:
15,000 m
Explanation:
[tex]speed = \frac{distance}{time} [/tex]
speed = 50 m/s
time = 5 minutes × 60
= 300 seconds
substitute the values into the formula
[tex]50 = \frac{distance}{300} [/tex]
[tex]50 \times 300 = distance[/tex]
[tex]15000 \: m = distance[/tex]
[tex]distance = 15000 \: m[/tex]
Glider A of mass 0.355 kg moves along a frictionless air track with a velocity of 0.095 m/s. It collides with glider B of mass 0.710 kg moving in the same direction at a speed of 0.045 m/s. After the collision, glider A continues in the same direction with a velocity of 0.035 m/s. What is the velocity of glider B after the collision?
Answer:
vB' = 0.075[m/s]
Explanation:
We can solve this problem using the principle of linear momentum conservation, which tells us that momentum is preserved before and after the collision.
Now we have to come up with an equation that involves both bodies, before and after the collision. To the left of the equal sign are taken the bodies before the collision and to the right after the collision.
[tex](m_{A}*v_{A})+(m_{B}*v_{B})=(m_{A}*v_{A'})+(m_{B}*v_{B'})[/tex]
where:
mA = 0.355 [kg]
vA = 0.095 [m/s] before the collision
mB = 0.710 [kg]
vB = 0.045 [m/s] before the collision
vA' = 0.035 [m/s] after the collision
vB' [m/s] after the collison.
The signs in the equation remain positive since before and after the collision, both bodies continue to move in the same direction.
[tex](0.355*0.095)+(0.710*0.045)=(0.355*0.035)+(0.710*v_{B'})\\v_{B'}=0.075[m/s][/tex]
Which type of force is a noncontact force?
Answer:The answer is C: any fundamental force
Explanation:
A P E X
9th grade science here, please help will mark brainliest
Answer:
positive. hope this helped
Based on details in The Riddle of the Rosetta Stone, which statement best describes Jean-Baptiste Fourier's influence on Jean-François Champollion?
Answer:
hello your question is incomplete below is the missing part of the complete question
which statement best describes Jean-Baptiste Fourier’s influence on Jean-François Champollion? Fourier shared his research about mathematics with Champollion, which aided him in his research. Fourier was the first to introduce Champollion to the hieroglyphs on the Rosetta Stone, which fascinated him. Fourier shared his findings about the Rosetta Stone with Champollion, which helped him in his research. Fourier was the first to introduce Champollion to a variety of languages, which prompted his love of languages.
answer : Fourier was the first to introduce Champollion to a variety of languages, which prompted his love of languages.
Explanation:
Jean-Baptiste Fourier's influence on Jean-Francois Champollion is that Fourier was the first to introduce Champollion to a variety of languages, which prompted his love of languages. also Fourier was a mathematician who pleaded on the behalf of Champollion when he was about to be adopted into the military.
Distinguishing between Speed and Velocity.
Answer:
Speed: Distance per time, 400 km/h, and a scalar quantity.
Velocity: Displacement per time, 20 m/s south, and a vector quantity.
Explanation:
Hope this helps! Please mark as brainliest.
Thanks!
List various ways through which AIDS spreads
please its aurgent fast
Answer:
Blood, semen, bodily fluids, breast milk
Explanation:
Explanation:
Through.....
1) blood
2) breast feeding
3) semen
4) unprotected sex etc
Shuffling your feet across the floor as you walk is an example of
A) charging by friction
B) induction
C) static discharge
D) conduction
E) none of the above
Answer:
i think a
Explanation:
Shuffling your feet across the floor as you walk is an example of charging by friction. The correct option is A.
What is friction?The force preventing sliding against one another of solid surfaces, fluid layers, and material components is known as friction.
There are various kinds of friction: Two solid surfaces in touch are opposed to one another's relative lateral motion by dry friction.
Frictional force is the force produced when two surfaces slide against and touch each other.
The surface texture and amount of force needing them together have the biggest an impact on these forces. The amount of frictional force is influenced by the object's position and angle.
As an illustration of how charge is transferred via friction, consider walking over a carpet.
Thus, the correct option is A.
For more details regarding friction, visit:
https://brainly.com/question/13000653
#SPJ5
Which of the following determines and objects ability to float in water
Atomic number
Mass and volume
Displacement in a liquid
Mass and gravity
A rocket ship starts from rest and turns on its forward booster rockets causing it to have a constant acceleration of 4 meters per second rightward
Complete question is;
A rocket ship starts from rest and turns on its forward booster rockets, causing it to have a constant acceleration of 4 m/s² rightward. After 3s, what will be the velocity of the rocket ship?
Answer:
v = 12 m/s
Explanation:
We are given;
Initial velocity; u = 0 m/s (because ship starts from rest)
Acceleration; a = 4 m/s²
Time; t = 3 s
To find velocity after 3 s, we will use Newton's first equation of motion;
v = u + at
v = 0 + (4 × 3)
v = 12 m/s
Can y’all help please
Answer:
advantages of using renewable energy resource
it is safer and cleaner
it does not produces green house gas and has 0 carbon emission
for producing electricity we use solar and wind power that does not harm the environment
advantages of using non renewable energy resource
they are abundant
they are affordable
easy to use
they are easily accessible and compatible
easy to store
Which tool can easily separate sand and iron filings?
O oil
O magnet
O water
Answer:
A magnet would be the answer
You shine light on a material. 50% of it is reflected by the surface. A further 10% of the original light is absorbed by the material. What is the transmittance of the material?
Answer: T = 40%
Explanation: The definition of Transmittance is a part of the incident light that passes through a surface or material moves through the other side of the surface. It is represented as T and is defined as the ratio of the intensity of incident light to the intensity of light that passes through the surface:
[tex]T=\frac{I}{I_{0}}[/tex]
where
I is intensity that passes through
I₀ is incident intensity
When you shine a light on a material and 50% of it is reflected, the remaining 50% will try to pass through. However, 10% is absorbed leaving 40% of the light to move through the other side of the surface.
So, Transmittance of this surface is 40%.
A graph that plots the temperature of a star against its brightness.
A. Electromagnetic Radiation
B. Especstroscopy
C. HertzPrung Russel Diagram
Answer:
C. HertzPrung Russel Diagram
Explanation:
The Hertzsprung–Russell diagram, or H–R diagram, is a plot of stellar luminosity against surface temperature. Most stars lie on the main sequence, which extends diagonally across the H–R diagram from high temperature and high luminosity to low temperature and low luminosity.
5. How much power is dissipated when 0.2 ampere of current flows through a 100-ohm resistor ?
Answer:
P=I*I*R
Where P is power
I is current
R is Resistance
P=2*2*100
P=400W
Explanation:
Power is the rate of doing work.
From the Ohm’s law V=IR
Power=I*I*R
50 POINTS !!!
What happens to ice when in water?
Dexter Eius is running through the cafeteria when he slips on some mashed potatoes and falls to the floor. (Let that be a lesson for Dexter.) Dexter lands in a puddle of milk and skids to a stop with an acceleration of -4.8 m/s/s. Dexter weighs 780 Newtons. Determine the coefficient of friction between Dexter and the milky floor.
Answer:
μ = 0.49
Explanation:
For this exercise we can use Newton's second law
Y Axis
N - W = 0
N = W = mg
X axis
-fr = ma
the equation for the friction force is
fr = μ N
we substitute
-μ m g = ma
μ = -a / g
we calculate
μ = 4.8 / 9.8
μ = 0.49
identfy the parts of he atom that are labeied in the
dagram
Label A:
Label B
NEED THE ANSWE ASAP!
Answer :
Label A - nucleus.
Label B- electron cloud.
Explanation :
An atom is the smallest unit of a matter that consist of three subatomic particles which are electrons, protons and neutrons.
The protons and the neutrons are located inside the nucleus or the center of the nucleus where the mass of the an atom is concentrated.
The electrons are located around the nucleus.
The protons are positively charged, the electrons are negatively charged and the neutrons are neutral that means it has no charge.
In the picture, label A shows the nucleus.
Electrons has the ability to revolve around the nucleus in a fixed circular orbit. Electron cloud represents the spreading of the electrons energy.
In the picture, label B shows the electron cloud.
Hence, the label A - nucleus and label B- electron cloud.
How can we transfer a table of motion data into a line graph?
Answer:
A table of motion (for a moving object) usually is something like:
Time I Position:
0s 1m
1s 3m
2s 5m
etc...
Where time is the independent variable and position represents the position of the object at that given time.
We can think in these points as coordinate pairs, for example, we can wrote these 3 pairs as:
(0s, 1m)
(1s, 3m)
(2s, 5m)
Now that we have these points, we can go to a coordinate plane and find these points
(The time would be on the horizontal axis, and position in the vertical axis)
Once you found the points, to complete the graph you need to find a line that connects the points.
An example of this is shown below, where the points used are the ones above, and the line should be straight.
Two objects are shown below. One is neutral and the other is negative. What do you predict would happen?
Answer:
The body becomes a positive charged body.
Explanation:
Given that two objects are shown below. One is neutral and the other is negative. What do you predict would happen?
According to the law of static electricity, like charges repel each other while unlike charges attract each other.
Since one of the object is neutral and the other one is negative, there will neither attraction nor repulsion between them.
Also, according to Electrostatic induction, the neural body can be charged and becomes positive.
The negative body will attract all the positive charges to its side, and repel all the negative charges to the other side. If the body is touched at the other end, the whole negative charges will be earthed and the body will become a positive body.
6. Which phase of matter has a definite volume and shape.
a. solid
b. liquid
c. gas
d.plasma
Answer:
solids
Explanation:
beacause if you take an ice cube does it change its shape no and if it has a definite shape it is sure to have a definite volume
Diffferentiare between atmospheric pressure and liquid pressure
Hydrostatic pressure is the pressure exerted by an incompressible fluid (a liquid) at a given point, due to the weight of the fluid above it. Atmospheric pressure is the pressure exerted on a surface by the weight of the atmosphere (a compressible fluid) above it.