Answer:
Part A:
"360 grams of NaCl can be dissolved in 1 L water. So, 2000 grams sugar can be dissolved in 1 L water then we can say that the solubility of salt is lesser in water as to sugar and both heightened by increasing the temperature. If we make a batch of 800 L we can add sugar, 1600 kg at 25 0c. We can add salt is 288 kg at 25 0c and the ingredient tomato is having low solubility."
Read more at Answer.Ya.Guru – https://answer.ya.guru/questions/8061-describe-the-sequence-of-adding-ingredients-to-make-the-recipe.html
Part B:
'Manufacturers can generate new value minimize cost and increase operational stability by focusing on 4 broad areas; Management, Supply Circle, Product Design, and Value Recovery.'
Read more at Answer.Ya.Guru – https://answer.ya.guru/questions/2807911-what-changes-could-be-made-to-optimize-the-manufacturing-process.html
In order to make tomato soup, the salt NaCl is first added, then followed by sugar and finally the tomato powder.
What are the ingredients required in making tomato soup?Tomato soup is made of the following ingredients:
Tomato powder salt, NaClsugarIn order to make tomato soup, the salt NaCl is first added, then followed by sugar. This is to ensure increase in the boiling point of water and to reduce the heating time of the tomato soup.
The solution is heated to induce more dissolution if solute and finally the tomato powder is added.
In order to optimize the manufacturing process, changes should be made in the design, supply and composition of the soup.
Therefore, an optimized manufacturing process will reduce cost of production.
Learn more about tomato soup at: https://brainly.com/question/21475711
correct name for ZnS
Zinc sulfide (or zinc sulphide) is an inorganic compound with the chemical formula of ZnS. This is the main form of zinc found in nature, where it mainly occurs as the mineral sphalerite.
Can someone help me please? I’d appreciate it! Also please do not send me a link or delete your answer! Thanks
The piston of an internal combustion engine
compresses 218 mL of gas. The final pressure
is 15 times greater than the initial pressure.
What is the final volume of the gas, assuming
constant temperature?
Answer in units of mL.
Answer:
14.53ML
Explanation:
V1=218
V2=?
P2=15p1
USING BOYLE'S LAW
P1V1=P2V2
V2=P1V1/P2=P1(218ML)/15P1
=14.53ML
Help needed ASAP, I will mark your answer as brainliest.
The back of a water droplet acts as a mirror. When light hits the back of the water droplet, it bounces back to our eyes. This is called ____________.
are manifested as
instantaneous charge differences due
to molecular interactions.
Dipole-dipole
interactions
Dispersion
forces
Hydrogen
bonds
dipole: dipole interactions
- dispersion forces (London forces)
- hydrogen bonds
as the attractive forces between molecules becomes larger, it takes more energy to separate them
- as a result, vapor pressures, boiling points and melting points will be larger
occur between molecules that have a permanent dipole moment
- H-Cl----H-Cl
In hospitals, staff members wear shoes with special soles to prevent build up of static charge as they walk. Why?Single line text.
Answer:
The correct answer is - sudden static charge could damage sensitive medical equipment.
Explanation:
Staff members of a hospital or medical institution wear special shoes that are able to prevent static charge as they walk. These shoes help to prevent static charge as we know that the sudden transfer of a static charge to medical equipment may alter the reports or damage sensitive equipment. This type of static charge is negative or positive due to electronic devices touches the device leads to damage of electric devices.
Thus, the correct answer is - sudden static charge could damage sensitive medical equipment.
1. Suppose the mechanical advantage of a machine is 4, and the input force is 20 N.
What is the output force?
0 16 N
0 24 N
80 N
O5N
Answer:
80 N
Explanation:
you can multiple
force equal to mass x gravity
The interaction of the skeletal and muscular systems to create movement and locomotion is regulated by which organ system?
Answer:
The muscoloskeletal system
Explanation:
The musculoskeletal system is made up of the body's bones (the skeleton), muscles, cartilage, tendons, ligaments, joints, and other connective tissue that supports and binds tissues and organs together. Its primary functions include supporting the body, allowing motion, and protecting vital organs.
Help needed ASAP, I will mark your answer as brainliest.
HELP ASAP
Which BEST explains the
relationship between the greenhouse
effect and global warming?
global warming causes the
greenhouse effect
greenhouse effect decreases
global warming
greenhouse effect increases
global warming
greenhouse effect is the same
as global warming
Answer:
greenhouse effect is the same as global warming
Explanation:
they both mean warming of the earths surface
Liquid A has weaker intermolecular forces than liquid B. Which liquid would demonstrate greater surface tension?
Answer:
ronger intermolecular forces will produce greater surface tension .
The intermolecular forces present in a sample of water are hydrogen bonds . The high surface tension of water allows a paper clip to "float" on the surface of the water. It's not actually floating, it's resting on top of the hydrogen bonds that exist between the water molecules at the surface. See the video below which shows a paper clip resting on the surface of water in a beaker.
If the hydrogen bonds are removed or disrupted, the surface tension will decrease. Watch what happens to the paper clip in the video when detergent (which will disrupt hydrogen bonds) is added to the beaker.
Here is video showing how a paperclip can "float" on water - it's actually being held up by the hydrogen bonds formed between water molecules which give water its surface tension.
pls mark me the brainliest
find the no of moles of ca in 8g of ca
Answer:
Thus,there are 0.2 mole in 8 g of calcium.
(2-2) Looking at the chemical formula CaF2 (calcium fluoride), what do you think this substance is made of? (Choose ALL that apply
Metal
Metalloid
Non-metal
Answer:
Metal
Non-metal
Explanation:
Ionic compounds are said to be formed when metals donate electrons to non metals.
The metals become positively charged while the nonmetals become negatively charged.
CaF2 is composed of Ca^2+ and F^-. Calcium is a metal of group 2 in the periodic table while F is a nonmetal of group 17 in the periodic table.
Hence CaF2 is composed of a metal and a nonmetal.
A mixture of oxygen( O2), dinitrogen monoxide (N2O), and argon (Ar) has a total pressure of 0.98 atm. What is the partial pressure of N2O, if the partial pressure of O2 is 0.48 atm and the partial pressure of Ar is 0.15 atm?
Answer: The partial pressure of [tex]N_{2}O[/tex] is 0.35 atm.
Explanation:
Given: Total pressure = 0.98 atm
Partial pressure of [tex]O_{2}[/tex] = 0.48 atm
Partial pressure of Ar = 0.15 atm
Partial pressure of [tex]N_{2}O[/tex] = ?
Total pressure is the sum of partial pressure of each component present in a mixture of gases.
Hence, partial pressure of [tex]N_{2}O[/tex] is calculated as follows.
Total pressure = [tex]P_{N_{2}O} + P_{O_{2}} + P_{Ar}[/tex]
Substitute the values into above formula as follows.
[tex]Total pressure = P_{N_{2}O} + P_{O_{2}} + P_{Ar}\\0.98 atm = P_{N_{2}O} + 0.48 atm + 0.15 atm\\P_{N_{2}O} = 0.35 atm[/tex]
Thus, we can conclude that the partial pressure of [tex]N_{2}O[/tex] is 0.35 atm.
What volume, in milliliters, of a 0.997 M KOH solution is needed to neutralize 30.0 mL of 0.0400 M HCl?
Answer:
1.2 mL
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated:
HCl + KOH —> KCl + H₂O
From the balanced equation,
Mole ratio of the acid, HCl (nₐ) = 1
Mole ratio of base, KOH (n₆) = 1
Finally, we shall determine the volume of the base, KOH needed to neutralize the acid, HCl as follow:
Molarity of base, KOH (M₆) = 0.997 M
Volume of acid, HCl (Vₐ) = 30 mL
Molarity of acid, HCl (Mₐ) = 0.0400 M
Volume of base, KOH (V₆) =?
MₐVₐ / M₆V₆ = nₐ/n₆
0.04 × 30 / 0.997 × V₆ = 1/1
1.2 / 0.997 × V₆ = 1
Cross multiply
0.997 × V₆ = 1.2
Divide both side by 0.997
V₆ = 1.2 / 0.997
V₆ = 1.2 mL
Thus, the volume of the base, KOH needed to neutralize the acid is 1.2 mL.
Let's say that you were given the following
problem:
A gas that exerts a pressure of 151 mm Hg in a
container with a volume of L will exert a
pressure of 166 mm Hg when transferred to a
container with a volume of 0.532 L.
Let's begin by assigning our variables. Let's say
that P1 = 151 mm Hg. What is V2?
Answer:
V2~0.4839M
Explanation:
We're going to use Boyles law to answer the question.
Boyle's law:
P1V1=P2V2
P1=151mmHg
P2=166mmHg
V1=0.532L
V2=?
V2=(P1 x V1)/P2
V2=(151 x 0.532)/166
V2~0.4839M
Hope it helps:)
Answer: C. unknown
Explanation: got it right on acellus
PLEASE HELP ASAP DUE SOON WILL MARK BRAINLIEST
When 35.47 g of sodium hydroxide react with boric acid (H3BO3), how many moles of sodium borate will be produced?
Answer:
5.83 g
Explanation:
First, you must start with a balanced equation so you can see the mole ratios.
NaOH + H₃BO₃ --> NaBO₂ + 2H₂O
You can see that it takes 1 mole of sodium hydroxide to form 1 mole of sodium borate. 1:1 ratio
Now you must calculate how many moles of NaOH 35.47 g equals.
Na = 22.99 amu
O = 15.99 amu
H = 1.008 amu
NaOH = 39.997 amu
35.47 g ÷ 39.997 amu = 0.08868 moles of NaOH
Since it's a 1:1 ratio, the same number of moles of NaBO₂ is created. Now you must convert moles to grams.
Na = 22.9 amu
B = 10.81 amu
2 O = 31.998 amu
NaBO₂ = 65.798 amu
0.08868 moles x 65.798 = 5.83 g
Ca(OH)2+CO2=___+____
Answer:
CaCO3 + H2O
Step by step explanation
Help me with chemistry! I got this answer wrong , what would be the right one?
Answer:
I probably think it's to achieve a higher energy state
Explanation:
-
What is the mass number of a atom with 10 protons and 13 neutrons
help!! please this is late!!
Answer:
pentene
Explanation:
pentene is 5 carbon chain with a double bond. The ending -ene indicates presence of double bond.
Which statement accurately describes the formation of a covalent bond?
a. Protons are shared between atoms.
b. Electrons are shared between atoms.
c. Protons are transferred from one atom to another.
d. Electrons are transferred from one atom to another.
Answer: b. Electrons are shared between atoms
Explanation: electrons are shared, forming molecules, covalent compounds have weaker forces holding the molecules together
What is the molar mass of Na2CO3?
60.0 g/mol
O 106.0 g/mol
118.0 g/mol
141.0 g/mol
Answer:
The required molar mass is 106.0 g/mol
Explanation:
We know,
Molar mass of Na = 23 g/mol
Molar mass of C= 12 g/mol
Molar mass of O= 16 g/mol
∴Molar mass of Na2CO3 = {(23 X 2) + 12+ (16 X 3)} g/mol
= (46 + 12 + 48) g/mol
= 106 g/mol
So, the required molar mass is 106.0 g/mol
When in history was the origin of Sci-Fi as
genre?
Why then?
Answer:
The term science fiction was popularized, if not invented, in the 1920s by one of the genre's principal advocates, the American publisher Hugo Gernsback. The Hugo Awards, given annually since 1953 by the World Science Fiction Society, are named after him.
Explanation:
In the equation C H4 + O2 C O2 + H2 O, what are the products?
A) C H4 + H2 O
B) C O2 + H2 O
C) O2 C O2
D) C H4 + O2
Answer:
Option B clearly shows the Products of the reaction
what energy is produced when particles vibrate?
sound energy is produced when particles vibrate. When an object vibrates, it causes movement in surrounding air molecules.
A sample of chlorine gas is stored at a temperature of -25oC. If the chlorine gas's temperature is raised to 52oC, its volume increases to 2.60 L. What is the initial volume of the gas?
Answer:
whats ur answer options
Explanation:
...
its b
calculate the amount of hydrogen sulphide that would be liberated by the action of sulphuric acid on 4.4 gram of ferrous sulphide. (Fe=56;S=32)
You will get iron sulfate and hydrogen sulfide gas (a.k.a. rotten egg gas).
FeS + H2SO4 = FeSO4 + H2S(g)
Change in Free Energy: ΔG(20C) = -66.6kJ (negative, so the reaction runs)
Change in Enthalpy: ΔH(20C) = -37.3kJ (negative, so the reaction is exothermic)
We'll begin by writing the balanced equation for the reaction between ferrous sulphide (FeS) and sulphuric acid (H₂SO₄). This is illustrated below:
FeS + H₂SO₄ —> H₂S + FeSO₄
Next, we shall determine the mass of FeS that reacted and the mass of H₂S produced from the balanced equation. This is illustrated below:
Molar mass of FeS = 56 + 32
= 88 g/mol
Mass of FeS from the balanced equation = 1 × 88 = 88g
Molar mass of H₂S = (2×1) + 32
= 2 + 32
= 34 g/mol
Mass of H₂S from the balanced equation = 1 × 34 = 34 g
SUMMARYFrom the balanced equation above,
88 g of FeS reacted to produce 34 g of H₂S.
Finally, we shall determine the mass of H₂S produced by the reaction of 4.4 g of FeS. This can be obtained as follow:
From the balanced equation above,
88 g of FeS reacted to produce 34 g of H₂S.
Therefore, 4.4 g of FeS will react to produce = (4.4 × 34)/88 = 1.7 g of H₂S.
Thus, 1.7 g of H₂S were obtained from the reaction.
Learn more: https://brainly.com/question/23115234
Some please help me!!! ASAP