Answer:
Its False
Explanation:
In parallel circuits the current splits up so each branch has a different effective resistance (in each of the separate branches one can use the series rule again). Due to this, the current isn't the same everywhere in a parallel circuit.
brainliest?
I'm stuck between B and C
In the problem, I know the potential energy increases because the height increases.
A block is at the bottom of a frictionless ramp and is given a kick so that it has some initial velocity and starts to slide up the ramp. There
is no air resistance. Which of the following is true of the energy of the block as it slides?
(A) Its potential energy will increase; its kinetic energy will decrease.
(C) Both its potential and kinetic energies will increase.
(B) Its potential energy will decrease; its kinetic energy will increase.
(D) Both its potential and kinetic energies will decrease.
Answer:
Explanation:
The answer is A. First of all, due to the First Law of Thermodynamics, energy cannot be created or destroyed, it only changes form. That being said, it is impossible for the PE and the KE to both increase or decrease at the same time. The second one starts decreasing, the other starts increasing at the exact same rate. PE exists or is at its highest when an object has the potential to fall to a point lower than it is, and it is at this point where Kinetic energy is the lowest. If this block is kicked UP a ramp, which is odd but there you have it, the potential energy increases as it gets higher off the ground. Because of gravity, and assuming that once the block is kicked, the foot that kicked it is no longer important to it (meaning it's not being pushed up, it's just kicked once and that's it) and it will slow down very quickly. KE exists where there is a great amount of velocity.
The answer is A.
Suppose you needed to push a 1,500-N sofa up a frictionless ramp with a 30° angle. How much force would you have to apply to the sofa?Show your work below.
Answer:
1299N
Explanation:
GIven data
Weight W= 1500N
Angle Ф= 30°
The applied force up the frictionless ramp is gotten by applying the formula below
F= WcosФ
substitute
F=1500 cos 30
F = 1500*0.8660
F= 1299N
Hence the applied force is 1299N
Maria's mother was deported 6 months ago, and she is staying with a cousin. She has to share a room with 3 other children and is very discouraged. She has little energy to do much of anything, and she cries a lot. She is probably suffering from?
She is probably suffering from a major depression. Depression results in emotional change and loss of interest in previously appreciated activities.
What is depression?Depression is a frequent and significant medical ailment that has an adverse effect on how you feel, think, and act. It can cause a number of mental and physical difficulties, as well as a loss in your ability.
According to epidemiological research, a hereditary element is involved in 30% to 40% of instances of bipolar illness. As a result, environmental influences have a larger role in the development of depression.
Maria's mother was deported 6 months ago, and she is staying with a cousin. She has to share a room with 3 other children and is very discouraged.
She has little energy to do much of anything, and she cries a lot, she is probably suffering from a major depression.]
Hence, option A is correct.
To learn more about the depression, refer to the link;
https://brainly.com/question/9790235
#SPJ2
The kinetic theory describes the __1__ of particles in matter and the forces of attraction between them. The theory assumes that the volume occupied by a gas is mostly __2__, that the particles of gas are relatively __3__, move __4__ of each other, and are in constant __5__ motion. The __6__ between particles are perfectly elastic so that the total __7__ remains constant. Gas pressure results from the simultaneous collisions of billions of particles with an object. Barometers are used to measure __8__ pressure. Standard conditions are defined as a temperature of __9__ and a pressure of __10__.
Answer:
1. Motion
2. Empty space
3. Far apart
4. Independently
5. Random or rapid
6. Collision
7. Kinetic energy
8. Atmospheric
9. 273 Kelvin or 0° Celsius
10. 1 atm, 101.3 kPa or 760 mmHg
Explanation:
In science, matter can be defined as anything that has mass and occupies space. Any physical object that is found on earth is typically composed of matter. Matter are known to be made up of atoms and as a result has the property of existing in states.
Generally, matter exists in three (3) distinct or classical phases and these are;
I. Gas.
II. Solid.
III. Liquid.
Filling the missing words or texts in the question, we have;
The kinetic theory describes the motion of particles in matter and the forces of attraction between them. The theory assumes that the volume occupied by a gas is mostly empty space, that the particles of gas are relatively far apart, move independently of each other, and are in constant random or rapid motion. The collision between particles are perfectly elastic so that the total kinetic energy remains constant. Gas pressure results from the simultaneous collisions of billions of particles with an object. Barometers are used to measure atmospheric pressure. Standard conditions are defined as a temperature of 273 Kelvin or 0° Celsius and a pressure of 1 atm, 101.3 kPa or 760 mmHg.
A bat produces a sound at 17,250Hz and wavelength 0.019m. What is
the speed of the sound?
Explanation:
v = f × /\
v = 17250 × 0.019
v = 327.75ms²
A produces a sound at a frequency of 17,250 Hz and wavelength of 0.079 m then the speed of sound will be equal to 327.75 m/s².
What is Wavelength?The distance between two identical locations (adjacent crests) in successive cycles is known as the wavelength, and it is used to describe waveform signals that are transmitted over wires or into space. Typically, in wireless systems, this length is specified in meters (m), centimeters (cm), or millimeters (mm). The wavelength is more frequently described in nanometers (nm), which are units of 10⁻⁹ m, or angstroms, which are units of 10⁻¹⁰ m, for infrared (IR), visible light (UV), and gamma radiation.
As per the given information in the question,
Frequency, f = 17,250 Hz
The wavelength λ = 0.019 m
Then the speed of the sound (v) will be,
v = f × λ
v = 17250 × 0.019
v = 327.75 m/s²
To know more about Wavelength:
https://brainly.com/question/13533093
#SPJ2
A microphone is attached to a spring that is suspended from the ceiling, as the drawing indicates. Directly below on the floor is a stationary 375-Hz source of sound. The microphone vibrates up and down in simple harmonic motion with a period of 1.80 s. The difference between the maximum and minimum sound frequencies detected by the microphone is 2.75 Hz. Ignoring any reflections of sound in the room and using 343 m/s for the speed of sound, determine the amplitude (in m) of the simple harmonic motion.
Answer:
[tex]0.361\ \text{m}[/tex]
Explanation:
[tex]f_s[/tex] = Frequency of source = 375 Hz
[tex]\Delta f[/tex] = Difference between the maximum and minimum sound frequencies = 2.75 Hz
v = Speed of sound in air = 343 m/s
T = Time period = 1.8 s
[tex]v_m[/tex] = Maximum speed of the microphone
We have the relation
[tex]\Delta f=2f_s\dfrac{v_m}{v}\\\Rightarrow v_m=\dfrac{\Delta fv}{2f_s}\\\Rightarrow v_m=\dfrac{2.75\times 343}{2\times 375}\\\Rightarrow v_m=1.26\ \text{m/s}[/tex]
Amplitude is given by
[tex]A=\dfrac{v_mT}{2\pi}\\\Rightarrow A=\dfrac{1.26\times 1.8}{2\pi}\\\Rightarrow A=0.361\ \text{m}[/tex]
The amplitude of the simple harmonic motion is [tex]0.361\ \text{m}[/tex].
Which object is an example of a mechanical wave?
A. light from a flashlight
B. microwaves used to heat food
C. police siren
D. sunlight
Answer:
C.
Explanation:
Hope It Helps
brainliest please
Answer:
C. police siren
Explanation:
Sound waves are mechanical waves
Two neutral objects - object A and object B - are rubbed together. During the process,
electrons are transferred from object A to object B. This would cause object A to acquire
a charge and object B to acquire a charge.
Answer:
I think it is + and + I could be wrong but I hope it helps
The _____ of a mechanical wave is a direct measure of its energy.
speed
frequency
amplitude
hertz
You hold an object up with a spring scale and it reads 5N.
What is the mass of the object?
Answer:
balance
Explanation:
Air resistance is the result of collisions of the object’s total surface area with air molecules. True or False
A.
TRUE
B.
FALSE
Answer:
true
Explanation:
Which is not a typical property of an acid?
A They react with alkalis producing water.
B They react with all metals producing hydrogen.
C They react with carbonates producing carbon dioxide.
D They turn litmus paper red.
Answer:
the answer is D acid don't turn paper red.
The one that is not a typical property of an acid is they react with all metals producing hydrogen. The correct option is D.
What is an acid?A substance that reacts with certain metals to produce salts and releases hydrogen ions into water.
Acids give certain dyes a reddish tint and have a sour flavour. Some body-produced acids, such as stomach acid, can support organ function. Hydrochloric acid is a kind of acid.
Acids and many metals, although not all, interact. As the metal combines with the acid to create a salt, hydrogen gas is created.
Acids and many metals, although not all, interact. As the metal combines with the acid to produce a salt, hydrogen gas is created.
The fact that acids react with all metals to produce hydrogen is the only characteristic of an acid that is unusual.
Thus, the correct option is D.
For more details regarding acid, visit:
https://brainly.com/question/14072179
#SPJ2
Which of the following statements is true for a ball thrown vertically upward
Why are solar storms a concern to Earth?
Which two structures are not found in animal cells?
A) vacioles and ribosomes
B) chloroplasts and ribosomes
C) cell walls and chloroplasts
D) endoplasmic reticulum and cell walls
Answer:
C
Explanation:
So, lets start off by thinking about what we know is in both cells, and rule out from there.
There are just some basic things you need in eukaryotic cells, those include the following:
Nucleuscell membranemitochondriacytoplasm(dont get confused with chloroplast)Rough and smooth endoplasmic reticulumGolgi vescileGolci apparatusNucleolus(Dont get confused with nulceus)Here are jsut a few examples of what can be found in both plant and animal cells, however we can already rule out all of the following except for:
C
Because remember, c talks about the chlorplast, which is not the chlorplasm found in both plant anf animal cells, its just the chloroplast found in plant cells.
Although I gave the asnwer to you. Here are some things that are in plant cells that arent in animal cells:
Cell wallvaciolescentral vaciolechlroplastplastidsAnimal cells on the other hand, have a few things that plant cells do not as well:
LysomeCentrolsomeHope this helps! ;)
Someone please help me figure this out
Answer:
The third one is correst
a) How is the single covalent bond usually shown in each diagram?
heena wants to measure the volume of a ball that is 24 cm across. How should she set up her equation? v = one-third pi 24 squared (12). v = one-third p 12 squared (24). v = four-thirds pi 24 cubed. v = four-thirds pi 12 cubed.
Answer:
v = four-thirds pi 12 cubed.
Explanation:
A ball has a spherical shape. The volume of a spherical shape can be calculated using the following formula:
[tex]V = \frac{4}{3} \pi r^3[/tex]
where,
V = Volume of Ball = ?
d = diameter of the ball = length across the ball = 24 cm
r = radius of ball = d/2 = 24 cm/2 = 12 cm
Therefore,
[tex]V = \frac{4}{3}\pi (12)^3[/tex]
Hence, the correct answer is:
v = four-thirds pi 12 cubed.
which apparatus is used to measure mass of a bread
Explanation:
a triple beam balance can measure the mass of one slice of bread
this questions pls help
Answer:
1. True
2. False
3. True
4. True
5. False
1.What is the kinetic energy of an object with a velocity of 7m / s and a mass of 14kg
2. What is the kinetic energy of an object with a velocity of 5m / s and a mass of 5kg
Helppppp!
Answer:
Explanation:
The formula for KE is
[tex]KE=\frac{1}{2}mv^2[/tex] and we fill in to solve for KE:
[tex]KE=\frac{1}{2}(14)(7.0)^2[/tex] I used 2 significant digits in the velocity because 1 isn't accurate enough. Therefore, my answer will be rounded to 2 sig fig's:
KE = 340 J (rounded from 343). And we do the exact same thing in #2:
[tex]KE=\frac{1}{2}(5.0)(5.0)^2[/tex] (Used 2sig fig's for both the mass and the velocity) to get
KE = 63 J (rounded from 62.5)
discuss impact of Newton's second law on roads
Answer:
The second law: When a force is applied to a car, the change in motion is proportional to the force divided by the mass of the car. This law is expressed by the famous equation F = ma, where F is a force, m is the mass of the car, and a is the acceleration, or change in motion, of the car
What is a mechanical advantage?
Answer:
B
Explanation:
A Mechanical Advantage is when you use a piece of machinery to help you do work, and it is an easy advantage.
A 200kg bumper car moving 3 m/s collides head on with a 392kg bumper car moving 6m/s. After impact, the larger car continues traveling in the same direction with a velocity of 1.6 m/s . Determine the speed of the other car.
Answer:
the final speed of the smaller car is 5.624 m/s
Explanation:
Given;
mass of the small car, m₁ = 200 kg
initial velocity of the small car, u₁ = 3 m/s
mass of the larger car, m₂ = 392 kg
initial velocity of the larger car, u₂ = 6 m/s
final velocity of the larger car, v₂ = 1.6 m/s
let the direction of the larger car be positive
let the direction of the smaller car be negative
Apply the principle of conservation of linear momentum to determine the final speed of the smaller car.
m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
200(-3) + 392(6) = 200v₁ + 392 x 1.6
-600 + 2352 = 200v₁ + 627.2
1752 = 200v₁ + 627.2
1752 - 627.2 = 200v₁
1124.8 = 200v₁
v₁ = 1124.8/200
v₁ = 5.624 m/s
Therefore, the final speed of the smaller car is 5.624 m/s
A uniform electric field, with a magnitude of 449 N/C, is directed parallel to the positive x-axis. If the potential at x= 4.59 m is 966 V, what is the potential at x= 1.61 m?
Answer:
2.334 kV
Explanation:
Since the electric field strength Ecosθ = -ΔV/Δx = -(V₂ - V₁)/(x₂ - x₁)
where V₁ = potential at x₁ = 966 V, x₁ = 4.59 m, V₂ = potential at x₂ = unknown, x₂ = 1.61 m and θ = angle between E and the x - axis.
Given that E = + 449 N/C and since it is directed parallel to the positive x - axis, θ = 0°
So,
Ecosθ = -ΔV/Δx
Ecos0° = -ΔV/Δx
E = -ΔV/Δx
E = -(V₂ - V₁)/(x₂ - x₁)
making V₂ subject of the formula, we have
-E(x₂ - x₁) = V₂ - V₁
-E(x₂ - x₁) + V₁ = V₂
V₂ = V₁ - E(x₂ - x₁)
Substituting the values of the variables into the equation, we have
V₂ = V₁ - E(x₂ - x₁)
V₂ = 966 V - 449 N/C(1.61 m - 4.59 m)
V₂ = 966 V - 449 N/C(-2.98 m)
V₂ = 966 V + 1,338.02 Nm/C
V₂ = 966 V + 1,338.02 V
V₂ = 2,334.02 V
V₂ ≅ 2,334 V
V₂ = 2.334 kV
Help Me!! 50pts
It will mean a lot
Explanation:
full moon
Boxers wear gloves that are padded to lessen the force of a punch. Calculate the force exerted by a boxing glove on an opponent's face, if the glove and face compress 8.50 cm during a blow in which the 7.00-kg arm and glove are brought to rest from an initial speed of 10.0 m/s. Give your answer in Newtons, do not include the unit in your answer.
Answer:
F = 4117.64
Explanation:
First, we will calculate the acceleration of the hand, by using the third equation of motion:
[tex]2as = v_f^2 - v_i^2\\[/tex]
where,
a = acceleration = ?
s = distance covered = compression = 8.5 cm = 0.085 m
vf = final speed = 0 m/s
vi = iniial speed = 10 m/s
Therefore,
[tex]2a(0.085\ m) = (0\ m/s)^2-(10\ m/s)^2\\a = - 588.23\ m/s^2[/tex]
negative sign hows deceleration.
Now, we will calculate the force exerted by the hand:
[tex]F = ma = (7\ kg)(588.23\ m/s^2)\\[/tex]
F = 4117.64 N
Utility companies charge by the kilowatt-hour. The number of kilowatt-hours used equals the number of kilowatts multiplied by the number of hours an electrical device was used. How long would it take for a 50-watt fan to use 1 kilowatt-hour of electricity? (Hint: 50 watts = 0.05 kilowatts.)
Answer:
t = 3 minutes
Explanation:
Given that,
Power of fan, P = 50 W
Energy used, E = 1 kWh
We know that,
Energy = Power/time
As, 50 watts = 0.05 kilowatts
So,
[tex]t=\dfrac{P}{E}\\\\t=\dfrac{0.05\ kW}{1\ kWh}\\\\t=0.05\ h[/tex]
or
t = 3 min
So, the required time is equal to 3 minutes.
A wheelbarrow can be used to help lift a load, such as a pile of dirt, and then push the load across a distance. A man pushes a wheelbarrow.
Answer:
B.) a wheel and axle and a lever
Explanation:
P.S - The exact question is -
Given - A wheelbarrow can be used to help lift a load, such as a pile of dirt, and then push the load across a distance. A man pushes a wheelbarrow.
To find - Which simple machines make up a wheelbarrow?
A.) a pulley and an inclined plane
B.) a wheel and axle and a lever
C.) a pulley and a wheel and axle
D.) a lever and a wedge
Proof -
The correct option is - B.) a wheel and axle and a lever
Wheelbarrows are used to carry more goods from place to place by using minimal force as compared when goods are carried by hand.
With this machine, During hauling people can save time.
Answer:
B.) a wheel and axle and a lever
Explanation:
Pedro y Juan van a la escuela en bicicleta. Pedro vive a 5 km de distancia al este de la escuela, y Juan al oeste es decir -4 km. Si ambos hicieron un tiempo de 0.25 horas. Cuál es la velocidad de cada uno?
Answer:
Lo primero que hay que recordar es la relación:
Velocidad = Distancia/tiempo.
Para el caso de Pedro, el vive a 5km de la escuela (es decir, para llegar a la escuela, el debe recorrer -5km, entonces la distancia es -5km), y recorre esa distancia en 0.25 horas, entonces su velocidad es:
Velocidad = -5km/0.25hr = -20km/h
Esto significa que Pedro se mueve con una velocidad de -20km/h, lo que significa que se mueve hacia el oeste con un módulo de 20km/h
Para el caso de Juan, el vive a -4km de la escuela, entonces el tendrá que recorrer 4km para llegar a la escuela, y los recorre en 0.25 horas, entonces su velocidad sera:
Velocidad = 4km/0.25h = 16 km/h
Lo que significa que Juan tiene una velocidad de 16km/h hacia el este.