Answer:
sulfur
Explanation:
From the given lists of elements, the one with the most electronegativity is Sulfur.
Electronegativity is of an element is a property that combines the ability of its atom to lose and gain electrons.
It is a measure of the relative tendency with which the atoms of the element attract valence electrons in a chemical bond.
Using the Pauling's electronegative table of elements;
Here are electronegativity values of the given elements;
selenium 2.4
arsenic 2.0
phosphorus 2.1
sulfur 2.5
We see that the value of sulfur is the highest.
Lizzie is pushing Alex on a scooter. Lizzie is pushing with 75 N of force to the left,
and Alex is helping with 20 N to the left. What is the net force on the scooter?*
Answer:
95 N
Explanation:
they are both pushing in the same direction so you simply add
75+20=95
[04.01] Which best describes the transition from gas to liquid?
Answer:
When gaseous state changes into liquid state the molecules slow down in speed because of decrease in energy molecules come slightly closer to each other.
How many electron shells are in period 1
Answer:
1
Explanation:
The amount of electron shells is the number of the period
choose the letter that best describes the behavior of a substance during a phase change:
/A/ neither absorbs or releases energy
/B/ always absorbs energy
/C/ always releases energy
/D/ either absorbs or releases energy
Answer:
/D/ either absorbs or releases energy
Explanation:
During a phase change energy is either absorbed or released.
A phase change is a reversible process which occurs when a substance changes is its state from one form to another.
Phase changes are used to delineate physical changes.
A phase diagram provides a graphic representation of the change. The diagram can be 2 dimensional or 3 dimensional.During evaporation, what causes certain liquid molecules to become vapor molecules? A. Decreased fluidity A. Increased viscosity A. Decreased kinetic energy A. Increased kinetic energy.
Answer:
The answer is A. Decreased Fluidity
Explanation:
Taking the test on preformance matters
In evaporation, particles of liquids take energy in the form of sunlight from the surrounding and then convert into vapor phase. Increased kinetic energy causes certain liquid molecules to become vapor molecules.
What is evaporation?Evaporation is a physical process in which the water in liquid state converts to gaseous state at the temperature below its boiling point. Evaporation happens before the boiling process.
Evaporation causes cooling effect in the surrounding. During summer when water is kept in earthen pot water cools, this is because of the evaporation process.
Evaporation is affected by temperature. As the temperature increases, kinetic energy of liquid molecules also increases and hence the rate of evaporation increases.
Therefore, increased kinetic energy causes certain liquid molecules to become vapor molecules.
To know more about evaporation, here:
https://brainly.com/question/8169606
#SPJ2
4. Fill in the space.
(a) Force is measured in the unit of
(b) A body moves in a circular path due to
(c) A
exerts force on iron, cobalt and nickel.
(d) Every object on the earth has
(e) We are able to write because of
(f) The change in displacement in unit time is
(g) The S.I. unit of velocity is
for
and of acceleration is
Answer:
N
Some sort of pulling force to the center
Magnet
Mass
Gravity
Velocity
m/s and m/s^2
Explanation:
which electrons are the valence of electrons of the atom?
Answer:
Valence electrons are the electrons in the outermost shell, or energy level, of an atom. For example, oxygen has six valence electrons, two in the 2s subshell and four in the 2p subshell.
How do minerals differ from ores?
Ores: metal/coal (iron, gold, coal)
Mineral: not metal, (Granite, limestone,
Where exactly is an orbital? I understand they are a volume where we expect to find electrons 90% of the time but I don't understand where their shapes are and fit on an atom, and the different forms of orbitals confuse me a little. Can someone explain me where they are with the help of an image? Pardon me if my question isn't very clear
Answer:
95% of the time (or any other percentage you choose), the electron will be found within a fairly easily defined region of space quite close to the nucleus. Such a region of space is called an orbital. You can think of an orbital as being the region of space in which the electron lives
Oxygen atoms have six outer electrons
Write the symbol for an oxide ion.
Answer:
[tex]O^{2-}[/tex] is the symbol for an oxide ion
You are exploring a dormat volcano. As you walk, you first notice volcanic ash. As you continue in the same direction you find pieces of Lapilli. At the point where you find the lapilli are you closer or further away from the crater? Please answer this im desperate!
Answer:
you are closer
Explanation:
lapilli is formed from volcanic ash particles, which is something we saw earlier. the particles turn into lapilli when they get moist usually by the magma caused from eruptions
Identify the reaction type shown and describe the clues that were used to identify it.
Fe2O3 + 2SiO2 → Fe2Si2O7
how many joules are needed to heat 20.0 g of Au from 10 C to 50 C
Answer:
Its actually Q = 103.2 J
Explanation:
Which answer choice best explains why nuclear reactions release more energy than chemical reactions? Electrostatic forces of repulsion are thousands of times stronger than gravitational forces. Gravitational forces are thousands of times stronger than electrostatic forces of repulsion. The force that binds together protons and neutrons is stronger than the force that attracts and repels protons and electrons. The force that attracts and repels protons and electrons is stronger than the force that binds together protons and neutrons.
Answer:
The force that binds together protons and neutrons is stronger than the force that attracts and repels protons and electrons.
Explanation:
1. Protons are positively charged. Protons have a mass of 1.
2. Neutrons are uncharged. Neutrons have a mass of 1.
3. Electrons are negatively charged. Electrons have almost no mass.
Nuclear reactions release more energy than chemical reactions as the force that binds together protons and neutrons is stronger than the force that attracts and repels protons and electrons.
Answer:
C) The force that binds together protons and neutrons is stronger than the force that attracts and repels protons and electrons.
Explanation:
Can someone help me with number 4 please?
What causes the
differences in physical characteristics like hair color among people?
1. diferent versions of genes
2. variations in DNA length
3. different numbers of chromosomes
4. variations in cell nucleus size
Answer:
b
Explanation:
i took the test
2. In a well-known movie, Raiders of the Lost Ark, there is a famous scene in which the hero tries to outwit the designers of a trap by replacing a gold statue with a bag of sand of about the same volume.
a) Knowing that the density of gold is 19.3 g/mL and sand is 3.1 g/mL, does this seem like a scientifically reasonable plan? Why or why not?
b) In the movie, the hero grabs the gold statue with one hand and appears to handle it quite easily. Given that the volume of the statue appears to be about 1 L, find the mass of the statue.
Answer:
I cant answer B, but I can answer A, and I don't think it is a scientifically reasonable plan.
Explanation:
The bag of sand weighs less than the gold statue, and yes the bag of sand seems like it would keep the trap from activating, but you would scientifically have to put something that was the same weight as the gold statue on the pedestal that the statue is on.
What is Aerosol,sol and gel
The transition metals (with the exception of Zn, Cd and Hg) are very much hard and have low volatility. Why Zn ,Cd and Hg has low melting points. (a) These have all their electrons paired. (b) These have maximum number of unpaired electrons. (c) These have very strong metallic bonding. (d) These have more metal-metal bonding.
Answer:
Zn ,Cd and Hg has low melting points because - These have all their electrons paired.
Explanation:
These have all their electrons paired -: All the electrons in the d-subshell are combined with Zn , Cd and Hg. The metallic bonds present in them are, therefore, weak. This is why they have low points of melting and bolting. therefore , this statement is true. These have maximum number of unpaired electrons. Since , these transition metals have all electrons paired , so this statement is incorrect.These have very strong metallic bonding -: Zn, Cd and Hg d-orbital are completely filled. They have poor metallic bonding and less compact packing due to their fully filled d-orbitals, so all of them are volatile in nature. Therefore, this statement is also not valid .These have more metal-metal bonding. -: Since , their metallic bond is weak , so this statement is not true .Hence , the correct option is A (These have all their electrons paired).
Select the measurement with that represents the least amount of pressure.
Select one:
a. 3 atm
b. 3.039 x 1013 Pa
c. 2.280 x 10^3 mm Hg
d. 40 psi
Answer:
a 3atm
Explanation:
or d 40 psi because it is true and corect [b 3.0398 21oinwex id cn uerfh uh 837hf uxhoec
If an object has a mass of 180 g and a density of 6 g/cm^3, what is the volume of the object?
Answer:
The answer is 30 cm³Explanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\[/tex]
From the question
mass = 180 g
density = 6 g/cm³
We have
[tex]volume = \frac{180}{6} \\ [/tex]
We have the final answer as
30 cm³Hope this helps you
Please can I have help on question e as I’m really stuck.I promise I’ll give out brainiest
The relative atomic mass of element A : 6.075 u
Further explanationThe elements in nature have several types of isotopes
Isotopes are atoms whose no-atom has the same number of protons while still having a different number of neutrons.
So Isotopes are elements that have the same Atomic Number (Proton)
Atomic mass is the average atomic mass of all its isotopes
Mass atom X = mass isotope 1 . % + mass isotope 2.% ...
Element A
mass number of isotope 1 = 6 , percent : 92.5%
mass number of isotope 2 = 7, percent : 7.5
Relative atomic mass of element A
[tex]\tt = 92.5\%\times 6+7.5\%\times 7\\\\=5.55+0.525=6.075~u[/tex]
What is the definition of a transverse wave and what does it look like?
Answer:
transverse waves, motion in which all points on a wave oscillate along paths at right angles to the direction of the wave's advance.
Why is the nitrogen cycle considered a closed system?
Answer:
because nitrogen is fixed by bacteria and assimilated by plants
Explanation:
Answer:
It is a considered a closed system because nitrogen is fixed by bacteria and is taken in by plants.
Explanation:
A helium-filled balloon is released into the atmosphere. As the balloon rises, which
would MOST likely increase and cause the balloon to burst?
O the volume of the helium
O the mass of the helium
o the temperature of the helium
O the density of the helium
SiS is what type of mineral?
which one only has one type of
atom In it.
Element , compound
Answer:
element
Explanation:
Considering the principles of KMT, which scenario would result in an increase of particles effective collisions at STP None of the above None of the above In a balloon In a balloon A container with large volume A container with large volume A container with small volume
Answer:
A container with small volume
Explanation:
The question is obviously incomplete because the image attachments are missing.
However, it is necessary to note that, the effective collisions depends on the volume of the gas.
The lesser the gas volume, the greater the effective collision between particles at STP.
Hence from the KMT, the scenario having the least volume of gas will have the greatest magnitude of effective collisions.
Consider the element sodium. It's atomic number is __________ and equals ___________.
Answer:
11 and equals the number of protons
Explanation:
At 9°C a gas has a volume of 6.17 L. What is its volume when the gas is at standard temperature?
Answer:
V₂ = 5.97 L
Explanation:
Given data:
Initial temperature = 9°C (9+273 = 282 K)
Initial volume of gas = 6.17 L
Final volume of gas = ?
Final temperature = standard = 273 K
Solution:
Formula:
The Charles Law will be apply to solve the given problem.
According to this law, 'the volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure'
Mathematical expression:
V₁/T₁ = V₂/T₂
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
Now we will put the values in formula.
V₁/T₁ = V₂/T₂
V₂ = V₁T₂/T₁
V₂ = 6.17 L × 273K / 282 k
V₂ = 1684.41 L.K / 282 K
V₂ = 5.97 L