Answer:
the answer is D
Explanation:
I hope it helps you
D. An electrolytic cell would be used to electroplate silver (Ag) on iron
(Fe).
To electroplate silver (Ag) on iron (Fe), an electrolytic cell would be used. In an electrolytic cell, electrical energy is used to drive a non-spontaneous chemical reaction, such as the deposition of silver onto the iron surface.
In the process of electroplating, the iron object serves as the cathode, where the reduction reaction occurs. The silver ions (Ag⁺) from the electrolyte solution are attracted to the cathode and are reduced to form solid silver (Ag) on the iron surface.
An electrolytic cell consists of two electrodes (anode and cathode) immersed in an electrolyte solution. The anode is typically made of the metal that will be dissolved or oxidized, while the cathode is the surface onto which the desired metal will be plated. In this case, the iron object would act as the cathode.
A dry cell (Option A) is a type of battery that produces electrical energy through a chemical reaction, but it is not suitable for electroplating. A voltaic cell (Option B) and a galvanic cell (Option C) are both types of electrochemical cells that produce electrical energy from spontaneous chemical reactions. However, they are not designed for the purpose of electroplating.
Only an electrolytic cell (Option D) allows the controlled deposition of one metal onto another by using an external power source to drive the desired reaction. Therefore, an electrolytic cell would be the appropriate choice for electroplating silver onto iron.
To learn more about electroplate silver, here
https://brainly.com/question/31787910
#SPJ2
Which scientist determined the charge of the electron?.
Answer:
J.J. Thomson
Explanation:
Which description best describes volume? *
O How hard the particles are pushing on something
O How many particles of something there is
O How hot/cold something is
How much space something takes up
O8.3145 L kPa / K mol
Answer:
how many particles are pushing something
Calculate the concentration in gdm3 of 0.85M Ammonium Carbonate solution. [C=12, N=14, H=1, N=14, 0=16]
Answer:
You need to provide a volume for the problem to be solved.
Explanation:
In industrialized states every tenth adult suffers daily, and every third occasionally, from heartburn. In Germany almost ten million people are affected by this disease. Helpful medicines against heartburn are the so-called ‘antacids’.
Antacids bound acids against an over-acidification of the stomach. The stomach acid contains hydrochloric acid (HCl, dissolved in water), which reacts with the antacid to form water, carbon dioxide and the corresponding salt. Generally, antacids are carbonates. Very common is ‘Bullrichs salt’, which uses sodium hydrogen carbonate as active ingredient. A single dose of an antacid is to be chosen in a way that it will react with two grams of hydrochloric acid. You are to formulate the instruction leaflet for a pharmaceutical company, which sells calcium carbonate (CaCO3) as an antacid. The dosing instruction says that in case of heartburn, one tablet with sufficient water is to be ingested.
But the specification, how many grams of calcium carbonate one tablet contains, is still missing…
Answer:
Antacids are medicines that counteract (neutralise) the acid in your stomach to relieve indigestion and heartburn. They come as a liquid or chewable tablets and can be bought from pharmacies and shops without a prescription.
What is the Noble-gas notation for sodium?
O [Ar]3s¹ 1
O [He]2s²2p 3s¹
[Ne]3s²3p4
O[Ne]3s¹
Answer:
The noble gas notation for sodium is [Ne] [tex]3s^{1\\[/tex]
Explanation:
Which compound releases hydroxide ions in an aqueous solution.
The compound that releases hydroxide ions in an aqueous solution would be a base.
What are bases?Bases are substances that when ionized in water, produce hydroxide ions as the only negative ion.
Bases are as opposed to acids. The latter produces hydrogen ions as the only positive ion when ionized in water. For example, sodium hydroxide ionizes in aqueous solutions as follows:
[tex]NaOH --- > Na^+ + OH^-[/tex]
Bases can also be defined as substances whose pH is above 7.
More on bases can be found here: https://brainly.com/question/4023906
#SPJ1
The bac is a measurement of the amount of alcohol in:.
Answer:
Blood
Explanation:
'B' stands for 'Blood' in Blood Alcohol Content
how to make crystals of sodium chloride without putting sodium into hydrochloric acid
Answer:
• Reacting aqueous Sodium hydroxide solution with Magnesium chloride.
Explanation:
[tex]{ \rm{2NaOH _{(aq)} + MgCl _{2(s)} \: \dashrightarrow \: 2NaCl _{(s)} + Mg(OH)_{2(aq)} }}[/tex]
Answer:
Sodium hydroxide solution + Magnesium chloride = sodium chloride crystals
Explanation:
how can you explain that even though you continue to add pure water into a substance, even though the resultant ph might differ a little, the acidity or alkalinity of substance still remains the same to that of substance?
Addition of pure water does not change pH of a solution because pure water has neutral pH.
Why the pH does not change when pure water is added?Even though you continue to add pure water into a substance, the acidity or alkalinity of substance still remains the same to that of substance because pure water has neutral pH which can't change the acidity or alkalinity of a solution.
So we can conclude that addition of pure water does not change pH of a solution because pure water has neutral pH.
Learn more about acid here: https://brainly.com/question/25148363
#SPJ1
When European demand for a certain solvent declined, Dow Chemical instructed its German plant to switch to manufacturing a chemical that had been imported from Louisiana and Texas. Dow Chemical would be best described as a(n)
Dow Chemical would be best described as a multinational corporation in this scenario.
What is a Multinational corporation?
This is the type of corporation which are involved in controlling production of goods and services in at least one country different from that of residence.
Dow chemical is known to have a plant in Germany and Russia thereby making it a multinational corporation.
Read more about Multinational corporation here https://brainly.com/question/494475
#SPJ1
What is the difference between, Flame tests and Flame emission spectroscopy?
Answer:
Flame testing is an analytical technique where a sample is applied to a flame, and the characteristic emission spectrum is used to identify different elements.
Answer:
Flame testing is an analytical technique where a sample is applied to a flame, and the characteristic emission spectrum is used to identify different elements. When this technique is used to identify metal species, it is called metal flame emission testing while Flame emission spectrophotometry is based on the characteristic emission of light by atoms of many metallic elements when given sufficient energy, such as that supplied by a hot flame.
Match the following
1. coefficient
2. law of conservation of mass
3. product
4. reactant
the number written in front of a
chemical symbol in an equation
principle that during a chemical
reaction the total mass of the system is
unchanged
the substance made in a chemical
reaction
the starting material in a chemical
reaction
The order would be coefficient, law of conservation of mass, products, and reactants respectively.
Word matchingThe number written in front of a chemical symbol in an equation is called a coefficient.
The total mass of a system being unchanged is known as the law of conservation of mass
The substances made in chemical reactions are called products.
The starting materials in chemical reactions are called reactants.
More on reactions can be found here: https://brainly.com/question/17434463
#SPJ1
When 2.5 moles of oxygen gas react completely with pentane, how many moles of carbon dioxide are present?
Balanced equation: C5H12 + 8 O2 --> 5 CO2 + 6 H2O
Show work
Answer:
1.6 mol Carbon Dioxide
Explanation:
In order to convert between mols of compounds, you need to use the mole ratio. First, divide 2.5 moles of oxygen gas by 8 moles of oxygen because that is the number of moles of oxygen gas in the balanced equation. Then to find the number of moles of carbon dioxide, multiply by the 5 moles of carbon dioxide in the mole ratio. After multiplying, you get the answer 1.56 moles of carbon dioxide and with 2 significant figures present you would round to 1.6 moles.
The difference in the heights of the Hg columns in Diagram B is17 mm-Hg. If the atmospheric pressure is 769 mm-Hg, what is the pressure of the confined gas in mm-Hg
The pressure of the confined gas will be 769-17 = 752 mmHg
What is Manometer ?Manometer is a U shaped instrument which is used to measure the pressure acting on a column of fluid , a difference in the pressure in the two arms of the manometer causes the liquid to reach different heights.
The difference in the heights of the Hg columns in Diagram B is17 mm-Hg.
the atmospheric pressure is 769 mm-Hg,
the pressure of the confined gas in mm-Hg = ?
The pressure of the confined gas will be 769-17 = 752 mmHg
To know more about Manometer
https://brainly.com/question/18354578
#SPJ1
Unit 8 Multiple Choice Questions
1. Which statements regarding the presence of greenhouse gases in the
atmosphere is a FALSE statement?
4
OA. The atmosphere is mostly non-greenhouse gases
OB. The atmosphere contains a small amount of greenhouse gases
C. The atmosphere has never changed
O
D. The greenhouse gases in the atmosphere have a large impact on the Earth's
climate.
This is a required question
Answer:
C
Explanation:
just did it
What happens when less energy is entering than exiting?
Answer:
If there is a decrease in the amount of carbon dioxide or methane, the amount of energy leaving the Earth system increases, so less energy enters than exits. When less energy enters than exits, Earth's surface absorbs less energy.
Explanation:
A solvent is added to dissolve only one mixture component and then the liquids are separated. Choose... A liquid is carefully poured out, leaving the solid behind in the container. Choose... A solid is caught on paper or a membrane while the liquid passes through. Choose... A solid mixture is heated. One component transitions directly between solid and gas. Choose...
The solid would be caught on a filter paper or membrane while the liquid passes through.
FiltrationFiltration is used to separate a mixture of insoluble substances in a liquid.
Since the aim is to separate the insoluble component of the mixture from the liquid, filtration using a suitable filter paper or membrane will be the way out.
The liquid will pass through the filter paper or the membrane while the insoluble component will be caught. This can then be dried and collected accordingly.
More on filtration can be found here: https://brainly.com/question/12674010
#SPJ1
What is the total molar concentration of ions of 1.250 0f ch30h
These statements describe three different reactions.
1-An atom shares electrons with another atom.
2- The nucleus of an atom is split apart.
3-An atom gains an electron from another atom.
Which reaction (s) most likely release the greatest amount of energy?
1
O2
O1 and 3
O2 and 3
An atom gains an electron from another atom. Hence, option B is the correct answer.
What is an atom?An atom is a particle of matter that uniquely defines a chemical element. An atom consists of a central nucleus that is usually surrounded by one or more electrons.
When an atom shares electrons with another atom then it results in the formation of a covalent bond.
Whereas when an atom transfer electrons from one atom to another then it results in the formation of an ionic bond.
When the nucleus of an atom splits then it represents a nuclear fission reaction and energy is released during this process.
Hence, option B is the correct answer.
Learn more about the atom here:
https://brainly.com/question/1566330
#SPJ1
Which of these is a characteristic of chemical change?
Select one:
a. turns cloudy
b. melts into liquid state
c. boil to a gas
d. break into smaller pieces
Characteristic of Chemical Change: c. boil to a gas
1. Chemical changes involve the transformation of one substance into another substance with different properties.
2. Option c, "boil to a gas," is a characteristic of chemical change.
3. When a substance undergoes a chemical change, it may experience a change in its physical state, such as boiling, as a result of the chemical reactions occurring at the molecular level.
4. Boiling refers to the process in which a substance changes from a liquid state to a gaseous state, usually by the absorption of heat energy.
5. During a chemical change, the bonds between atoms or molecules in the substance are broken and rearranged, leading to the formation of new substances.
6. The change in state from a liquid to a gas indicates that a chemical reaction has taken place, resulting in the formation of different chemical compounds.
7. On the other hand, options a and b, turning cloudy and melting into a liquid state, are characteristics of physical changes rather than chemical changes.
8. Turning cloudy generally occurs due to the formation of suspended particles in a substance, while melting refers to the transition from a solid to a liquid state without the formation of new substances.
9. Option d, breaking into smaller pieces, can also be a characteristic of physical changes, such as when a solid is mechanically fragmented, without any alteration in its chemical composition.
10. Therefore, among the given options, the characteristic that specifically indicates a chemical change is c, boiling to a gas.
For more such questions on Chemical Change, click on:
https://brainly.com/question/16768723
#SPJ8
If 23.0 g of Na react completely with 35.5 g of Cl2 to form 58.5 g of NaCl, what mass of Cl2 is required to react completely with 10.0 g of Na
The mass of Cl₂ required to react completely with 10.0 g of Na given the data is 15.4 g
Balanced equationNa + ½Cl₂ —> NaCl
From the balanced equation above,
23 g of Na required 35.5 g of Cl₂
How to determine the mass of Cl₂ requiredFrom the balanced equation above,
23 g of Na required 35.5 g of Cl₂
Therefore,
10 g of Na will require = (10 × 35.5) / 23 = 15.4 g of Cl₂
Thus, 15.4 g of Cl₂ are required for the reaction
Learn more about stoichiometry:
https://brainly.com/question/14735801
#SPJ4
31. calculate the amount of energy released as heat by the freezing of 13.3 g of a liquid substance, given that the substance has a molar mass of 82.9 g/mol and a molar enthalpy of fusion of 4.60 kj/mol.
From the calculations, the heat of fusion of the substance is 0.73 kJ
What is is the heat of freezing?The heat of freezing is the energy released when the substance is converted from liquid to solid.
Now we know that the molar mass of the substance is 82.9 g/mol hence the number of moles of the substance is; 13.3 g /82.9 g/mol = 0.16 moles
Now the heat of fusion shall be;
H = 4.60 kj/mol * 0.16 moles
H = 0.73 kJ
Learn more about freezing:https://brainly.com/question/3121416
#SPJ4
Identify a cation. An atom that has gained a proton. An atom that has lost an electron. An atom that has gained an electron. An atom that has lost a proton.
the answer would be B an atom that has lost an electron
I WILL GIVE BRAINLIEST! PLEASE HELP :')
What is the volume of a gas if 0.182 moles of the gas is at 1.99 atm and 83.4oC?
Answer:
2,67 L
Explanation:
Determine the empirical formula of a compound containing 40. 6 grams of carbon, 5. 1 grams of hydrogen, and 54. 2 grams of oxygen.
in an experiment, the molar mass of the compound was determined to be 118. 084 g/mol. what is the molecular formula of the compound?
for both questions, show your work or explain how you determined the formulas by giving specific values used in calculations
The empirical formula is C₂H₃O₂
What is Empirical formula of a compound ?The empirical formula is the simplest whole number ratio of elements present in a compound.
The total molar mass of the compound is 118.084 g/mol.
mass of Carbon present = 40.6
mass of Hydrogen present = 5.1 grams
mass of Oxygen present = 2 grams
Moles of C = 40.6/12 = 3.38
Moles of H = 5.1/1.008 = 5
Moles of Oxygen = 54.2/15.999 = 3.38
Ratio of Moles of C to Oxygen is 1 : 1
Ratio of Moles of C to H is 1/1.5
Multiplying each mole fraction by 2
The empirical formula is C₂H₃O₂
To know more about Empirical Formula
https://brainly.com/question/14044066
#SPJ1
Identify the products of the reaction between 2KOH and H₂SO4- OH.
Answer:
The reaction is H2SO4 + 2KOH = K2SO4 + 2H2O
It resembles a double displacement reaction.
Notice how it is balanced so that there are the same number of each type of atom on both sides of the reaction.
The potassium sulfate will ionize into K+ ions and SO4-- ions, but the formula is usually written as above.
5.6 grams of hydrogen react with some oxygen. 41.4 grams of water is the product. How much oxygen reacted (in grams)?
The amount of oxygen in grams that reacted with 5.6 g of hydrogen to produce 41.4 g of water is 36.8 g
Balanced equation2H₂ + O₂ —> 2H₂O
Molar mass of O₂ = 32 g/mole
Mass of O₂ from the balanced equation = 1 × 32 = 32 g
Molar mass of H₂O = 18 g/mole
Mass of H₂O from the balanced equation = 2 × 18 = 36 g
SUMMARY
From the balanced equation above,
36 g of H₂O was produced from 32 g of O₂
NOTE: O₂ is the limiting reactant
How to determine the mass of oxygen requiredFrom the balanced equation above,
36 g of H₂O was produced from 32 g of O₂
Therefore,
41.4 g of H₂O will be produced from = (41.4 × 32) / 36 = 36.8 g of O₂
Thus, 36.8 g of O₂ reacted to produce 41.4 g of H₂O
Learn more about stoichiometry:
https://brainly.com/question/14735801
#SPJ1
2H2O + 3HCl ——> 5H2O + Cl
how many moles of H2O are needed to make 3 moles of HCl?
Answer: 2 moles
Explanation:
We know from the equation that for every 3 moles of HCl consumed, 2 moles of water are consumed (based on the coefficients)
So, the answer is 2 moles.
Gas Law
In a mixture of carbon dioxide and oxygen, 40.0% of the gas pressure is exerted by oxygen. If the total pressure is 115 mmHg, what is the pressure of the carbon dioxide in
atm?
69 mmHg pressure is exerted by oxygen if 40% of the gas pressure is exerted by the oxygen gas.
What is pressure?Pressure is defined to be the amount of force exerted per area
40% of pressure is exerted by oxygen gas.
So, 60% of pressure will be exerted by carbon dioxide gas.
60% of 115 mmHg = 69 mmHg
Hence, 69 mmHg pressure is exerted by oxygen if 40% of the gas pressure is exerted by the oxygen gas.
Learn more about pressure here:
brainly.com/question/15175692
#SPJ1
Measurements show that unknown x compound has the following composition:
carbon 18.1%
hydrogen 2.27%
chlorine 79.8%
Write the empirical chemical formula of x.
The empirical formula of the compound with the percent composition C 18.1%, H 2.27%, Cl 79.8% is C₂H₃Cl₃.
What is an empirical formula?It is the minimum ratio between the elements that form a compound.
Step 1: Divide each percentage by the molar mass of the element.C: 18.1/12.01 = 1.51
H: 2.27/1.01 = 2.25
Cl: 79.8/35.45 = 2.25
Step 2: Divide all the numbers by the smallest one.C; 1.51/1.51 = 1
H: 2.25/1.51 ≈ 1.5
Cl: 2.25/1.51 ≈ 1.5
Step 3: Multiply all the numbers by 2 so all of them are whole.C: 1 × 2 = 2
H: 1.5 × 2 = 3
Cl: 1.5 × 2 = 3
The empirical formula is C₂H₃Cl₃.
The empirical formula of the compound with the percent composition C 18.1%, H 2.27%, Cl 79.8% is C₂H₃Cl₃.
Learn more about empirical formula here: https://brainly.com/question/1603500
#SPJ1