Rank compounds in order of decreasing heat of hydrogenation: hexa-1,2-diene; hexa-1,3,5-triene; hexa-1,3-diene; hexa-1,4-diene; hexa-1,5-diene; hexa-2,4-diene Rank from largest to smallest heat of hydrogenation. To rank items as equivalent, overlap them. H2C=C=C H

These solvents are arrange by polarity from least to most polar. The order is as follows: toluene, acetone, isopropanol, ethanol, and water.

The solvents arranged from least to most polar are: toluene, acetone, ethanol, isopropanol, and water.
 A polar aprotic solvent is a solvent that lacks an acidic proton and is polar. Such solvents lack hydroxyl and amine groups. In contrast to protic solvents, these solvents do not serve as proton donors in hydrogen bonding, although they can be proton acceptors. These solvents are able to dissolve both types of substances because they have a partially positive end (the polar part) and a partially negative end (the aprotic part), which allows them to interact with both types of molecules.

Visit here to learn more about  polarity : https://brainly.com/question/13468845
#SPJ11

The nature of the hemoglobin in the lungs lungs is Hb(O2)4.

The volume of water added is  1851.7 mL

Le Chatelier's principle is a principle in chemistry that describes how a system at equilibrium responds to changes in its environment.

Using the dilution principle;

C1V1 = C2V2

C1 = Antilog(-2.025)

= 9.4 * 10^-3 M

C2 = Antilog (-4.050)

= 8.9 * 10^-5 M

Then;

V2 = C1V1/C2

V2 = 9.4 * 10^-3 M * 17.7/8.9 * 10^-5 M

V2 = 1869.4 mL

Volume of water added = 1869.4 mL - 17.7 mL

= 1851.7 mL

Learn more about Le Chateliers principle:https://brainly.com/question/29009512

#SPJ1

The isomer 1-methylcyclohexene is predicted to be formed in greater amounts. The reason is that the more stable, lower energy alkene isomer is the one that has the higher degree of substitution.

The isomer predicted to be formed in greater amounts is 1-methylcyclohexane. The reason for this is that it has a higher degree of substitution compared to 3-methylcyclohexene, which makes it more stable and lower in energy. This is because 1-methylcyclohexane has a substituent (methyl group) attached to the primary carbon, while 3-methylcyclohexene has a substituent attached to a secondary carbon. Therefore, the higher degree of substitution in 1-methylcyclohexane makes it the more stable isomer.

Learn more about isomer here: brainly.com/question/12796779

#SPJ11

The main differences in the IR spectra between 3,3-dimethyl-2-butanone and 2,3-dimethylbut-3-en-2-ol are due to the presence of carbonyl absorption in the former and hydroxyl and alkene absorptions in the latter, which can be used to differentiate them based on their functional groups.

For 3,3-dimethyl-2-butanone, the major absorbance bands in the IR spectra would be:
1. Carbonyl (C=O) stretching: around 1700 cm⁻¹
2. C-H stretching for methyl and methylene groups: 2850-3000 cm⁻¹
3. C-H bending for methyl groups: around 1375 cm⁻¹

For 2,3-dimethylbut-3-en-2-ol, the major absorbance bands in the IR spectra would be:
1. Hydroxyl (O-H) stretching: around 3200-3600 cm⁻¹ (broad)
2. C=C stretching for alkene: around 1650 cm⁻¹
3. C-H stretching for methyl, methylene, and alkene groups: 2850-3100 cm⁻¹
4. C-H bending for methyl groups: around 1375 cm⁻¹

The differences in the IR spectra between these two compounds would mainly be the presence of the carbonyl absorption in 3,3-dimethyl-2-butanone and the hydroxyl and alkene absorptions in 2,3-dimethylbut-3-en-2-ol. These differences help in distinguishing the two compounds based on their functional groups.

To know more about IR spectra click here:

https://brainly.com/question/30465075

#SPJ11

pH of the solution is 1.54. The correct alternative is A.

The Ka expression for nitrous acid is:

Ka = [H⁺][NO₂⁻] / [HNO₂]

Let x be the concentration of H⁺ and NO₂⁻ ions that are formed in the dissociation of nitrous acid, and assume that the initial concentration of nitrous acid is 2.00 M. Then, the equilibrium concentrations will be:

[HNO₂] = 2.00 - x

[H⁺] = x

[NO₂⁻] = x

Substituting these values into the Ka expression and solving for x:

Ka = [H⁺][NO₂⁻] / [HNO]

4.5 x 10⁻⁴ = x² / (2.00 - x)

This equation can be simplified using the approximation that x << 2.00:

4.5 x 10⁻⁴ = x² / 2.00

x² = 9 x 10⁻⁴

x = 3 x 10⁻₂

Therefore, [H+] = 3 x 10⁻² M, and the pH of the solution is:

pH = -log[H⁺]

pH = -log(3 x 10⁻²)

pH ≈ 1.52

Therefore, the correct answer is A. 1.54.

To know more about pH is:
https://brainly.com/question/491373#

#SPJ11

The product for the given reaction sequence would be: 3,4-dimethyl-7-nonanol.

The first reaction involves the conversion of 6,7-dimethyl-3-nonanol to 6,7-dimethyl-3-nonanone using PBr3 and then further oxidizing it to 6,7-dimethyl-3-nonanal using PCC.

In the second step, the resulting 6,7-dimethyl-3-nonanal is treated with H3O+ to form the final product, that is:

3,4-dimethyl-7-nonanol.

Based on the reaction sequence provided, the product for this reaction is 6,7-dimethyl-3-nonanone.

The initial reaction involves PBr3 to replace the OH group with a Br, then Mg/ether forms a Grignard reagent, followed by the addition of H30+ to protonate the oxygen, and finally, PCC oxidizes the alcohol to a ketone.

To know more about Grignard reagent: brainly.com/question/28188958

#SPJ11

The product for the given reaction sequence would be: 3,4-dimethyl-7-nonanol.

The first reaction involves the conversion of 6,7-dimethyl-3-nonanol to 6,7-dimethyl-3-nonanone using PBr3 and then further oxidizing it to 6,7-dimethyl-3-nonanal using PCC.

In the second step, the resulting 6,7-dimethyl-3-nonanal is treated with H3O+ to form the final product, that is:

3,4-dimethyl-7-nonanol.

Based on the reaction sequence provided, the product for this reaction is 6,7-dimethyl-3-nonanone.

The initial reaction involves PBr3 to replace the OH group with a Br, then Mg/ether forms a Grignard reagent, followed by the addition of H30+ to protonate the oxygen, and finally, PCC oxidizes the alcohol to a ketone.

To know more about Grignard reagent: brainly.com/question/28188958

#SPJ11

An expression in chemistry that can be used to prepare buffer solutions is the Henderson-Hasselbalch equation.

The Henderson-Hasselbalch equation can be used to calculate the pH of a solution that contains a weak acid and its conjugate base, or a weak base and its conjugate acid. It is used when you have a buffer solution, which is a solution that can resist changes in pH when small amounts of acid or base are added. The Henderson-Hasselbalch equation allows you to calculate the pH of a buffer solution based on the concentration of the weak acid or base, the concentration of its conjugate base or acid, and the dissociation constant of the weak acid or base.

The Henderson-Hasselbalch equation is a chemical expression that can be used to determine an acid-base ratio in order to compute the pH of a buffer or to determine the acid and base concentrations required for a certain pH.

Learn more about Henderson-Hasselbalch equation here

https://brainly.com/question/13423434

#SPJ11

The reduction potential for this half-reaction at pH = 5.00 can be calculated using the Nernst equation:

E = E° - (0.0592/n) x log([Mn²+][H₂O]⁴/[MnO4][H+]⁸)

where E° is the standard reduction potential, n is the number of electrons transferred in the half-reaction (5 in this case), [Mn²+] and [H₂O] are the concentrations of the products, and [MnO4] and [H+] are the concentrations of the reactants.

At pH = 5.00, the concentration of H+ is 10⁻⁵ M. Assuming the concentration of Mn²+ and H₂O are both 1 M, we can calculate:

E = 1.51 V - (0.0592/5) x log([1][1⁴]/[1][10⁻⁵]⁸) E = 1.51 V - (0.0592/5) x log(10¹⁶) E = 1.51 V - 2.01 V E = -0.50 V Therefore, the reduction potential for this half-reaction at pH = 5.00 is -0.50 V, which is option (D).

Learn more about standard reduction potential at

https://brainly.com/question/30904774

#SPJ11

To synthesize phenylacetic acid (C₆H₅CH₂CO₂H) and m-nitrobenzoic acid from benzene, you would follow these steps:

For phenylacetic acid:
1. Perform Friedel-Crafts alkylation on benzene using ethyl chloride and aluminum chloride as catalyst to form ethylbenzene.
2. Oxidize ethylbenzene using potassium permanganate (KMnO₄) to obtain phenylacetic acid.

For m-nitrobenzoic acid:
1. Nitrate benzene with a mixture of concentrated nitric acid (HNO₃) and concentrated sulfuric acid (H₂SO₄) to form nitrobenzene.
2. Perform Friedel-Crafts acylation using acetyl chloride and aluminum chloride as catalyst to obtain m-nitroacetophenone.
3. Hydrolyze m-nitroacetophenone using aqueous potassium hydroxide (KOH) to form m-nitrobenzoic acid.

In summary, synthesize phenylacetic acid and m-nitrobenzoic acid from benzene through Friedel-Crafts reactions, followed by oxidation and hydrolysis, respectively.

To know more about Friedel-Crafts alkylation click on below link:

https://brainly.com/question/30884625#

#SPJ11

The balloon must be heated to a temperature of approximately: 423 K in order to have a volume of 6.00 L.

To find the temperature to which a balloon must be heated, initially at 9°C and 4.00 L, in order to have a volume of 6.00 L, we can use the combined gas law. The combined gas law is given by:
(P1 * V1) / T1 = (P2 * V2) / T2

Since pressure (P) remains constant in this problem, we can remove it from the equation and use Charles's Law:
V1 / T1 = V2 / T2

First, convert the initial temperature from Celsius to Kelvin:
T1 = 9°C + 273.15 = 282.15 K

Next, plug in the values for V1, T1, and V2:
(4.00 L) / (282.15 K) = (6.00 L) / T2

Now, solve for T2:
T2 = (6.00 L * 282.15 K) / 4.00 L = 423.225 K

Since the given options are in whole numbers, round the answer:
T2 ≈ 423 K

To know more about "Charles's Law" refer here:

https://brainly.com/question/16927784#

#SPJ11

Answer:

10 Watts

Explanation:

These equations are needed to work out the answer:

power= work done/ time taken

work done= force* distance

force= mass* acceleration

force: 10 kg* 1m/s= 10

work done: 10 * 2m= 20m

power: 20/2= 10

Hope this helps :)

Pls brainliest...

* Sorry if my answer is bad, I'm learning this kind of things in Physics*

Impressed current cathodic protection (ICCP) is a corrosion prevention technique that utilizes an external power source to force a direct electrical current onto a metallic path, preventing corrosion.

The system consists of an anode, which is connected to the positive terminal of a DC power supply, and a cathode, the structure to be protected, connected to the negative terminal. The anode, usually made of an inert material such as platinum, is placed in an electrolyte, which is usually a conductive liquid. As a result, current flows from the anode, through the electrolyte, and onto the structure through a metallic path.
The impressed current system generates a current that is greater than the natural corrosion current, thereby making it more effective than other cathodic protection methods. The power source is typically designed to produce a current density that is sufficient to overcome the natural corrosion rate of the structure. ICCP systems are commonly used in environments with high corrosion rates, such as seawater, and are effective at protecting large structures such as bridges, offshore platforms, and pipelines. The system requires periodic maintenance to ensure that it continues to operate efficiently.

learn more about the corrosion Refer: https://brainly.com/question/31313074

#SPJ11

The correct statement is C)  A buffer forms when a conjugate weak acid/weak base pair are mixed together.

A buffer is a solution that resists changes in pH when small amounts of acid or base are added to it. It is made up of a weak acid and its conjugate base, or a weak base and its conjugate acid. When a strong acid or strong base is added to a solution, it can completely ionize and change the pH significantly, which is why they cannot form a buffer. However, when a weak acid is mixed with a weak base, they can form a conjugate acid-base pair and act as a buffer solution.

Learn more about conjugate acid here:

https://brainly.com/question/31229565

#SPJ11

The halogens ranked from least active to most active are: At, I, Br, Cl, and F.

To rank halogens in order from least active to most active, follow these steps:

1. Recall that halogens are elements in Group 17 (VIIA) of the periodic table, which includes fluorine (F), chlorine (Cl), bromine (Br), iodine (I), and astatine (At).

2. Understand that the reactivity of halogens decreases as you move down the group. This is due to the increasing atomic size and decreasing electronegativity, making it more difficult for the atom to attract and gain electrons.

3. Arrange the halogens from least active to most active, based on their position in the periodic table, starting from the bottom and moving upward:

Least active: Astatine (At) → Iodine (I) → Bromine (Br) → Chlorine (Cl) → Most active: Fluorine (F)

Know more about halogens - brainly.com/question/1450671

#SPJ11

There are [tex]3.757 * 10^{25}[/tex] oxygen atoms in 5.20 moles of at are calculated using Avogadro's number.

To find the number of oxygen atoms in 5.20 mol of [tex]Al_2(SO_4)_3[/tex], follow these steps:

1. Identify the number of oxygen atoms in one molecule of [tex]Al_2(SO_4)_3[/tex].

The formula shows that there are 3 [tex]SO_4[/tex] units, each containing 4 oxygen atoms: 3 x 4 = 12 oxygen atoms per molecule.

2. Calculate the total number of molecules in 5.20 mol of [tex]Al_2(SO_4)_3[/tex].

Use Avogadro's number ([tex]6.022 * 10^{23}[/tex] molecules/mol):

5.20 mol * ([tex]6.022 * 10^{23}[/tex] molecules/mol) = [tex]3.131 * 10^{24}[/tex] molecules.

3. Find the total number of oxygen atoms by multiplying the number of molecules ([tex]3.131 * 10^{24}[/tex]) by the number of oxygen atoms per molecule (12):

([tex]3.131 * 10^{24}[/tex] molecules) * (12 oxygen atoms/molecule) = [tex]3.757 * 10^{25}[/tex] oxygen atoms.

To learn more about atoms click here https://brainly.com/question/30898688

#SPJ11

Explanation:

4. x 10^-5      the -5  exponent means move the decimal point FIVE spaces to the LEFT

     = .00004

The main difference between a continuous and linear spectrum is the presence or absence of gaps or missing colors in the emitted light.

A continuous spectrum, such as that emitted by a blackbody radiator, shows a wide range of frequencies or wavelengths of light with no gaps. The intensity of the emitted light varies continuously throughout the spectrum. Blackbody radiators, like the Sun, produce light by thermal radiation and exhibit a continuous spectrum.

A line spectrum, on the other hand, consists of distinct and separate lines or "spectra" at specific frequencies or wavelengths. This type of spectrum is produced when atoms or molecules in a gas phase emit or absorb light at particular wavelengths, which are unique to the element or compound involved. Line spectra are characteristic of elements and can be used for identification purposes.

Learn more about the electromagnetic spectrum at https://brainly.com/question/25131143

#SPJ11

The temperature of a reaction with k = 1.20 x 10⁻⁶ and ∆G° = 24.90 kJ/mol is 204.25 K.

To determine the temperature, use the equation: ∆G° = -RT ln(k), where ∆G° is the standard Gibbs free energy change, R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin, and k is the reaction's equilibrium constant.

First, convert ∆G° to J/mol: 24.90 kJ/mol × 1000 = 24,900 J/mol. Next, rearrange the equation to solve for T: T = -∆G° / (R ln(k)). Finally, plug in the values: T = -24,900 / (8.314 × ln(1.20 x 10⁻⁶)) ≈ 204.25 K. The temperature of the reaction is approximately 204.25 K.

To know more about Gibbs free energy click on below link:

https://brainly.com/question/13318988#

#SPJ11

a. The angular speed (in rad/s) of the car is: ω = v / r.

b. The magnitude: a = [tex]v^2[/tex] / r (in m/s2) and direction of the car's acceleration is towards the: center of the circular path.

To answer your question, we will know how to calculate the angular speed and the magnitude and direction of the car's acceleration using the given terms.

a) To find the angular speed (ω) of the car in rad/s, you can use the formula:
ω = v / r
where v is the linear speed of the car (in m/s) and
r is the radius of the circular path (in meters).

b) To find the magnitude of the car's acceleration (a), you can use the formula:
a = [tex]v^2[/tex] / r

The direction of the car's acceleration is towards the center of the circular path, also known as centripetal acceleration.

To know more about "Centripetal acceleration" refer here:

https://brainly.com/question/18695728#

#SPJ11

The number of photons per second that strike a sheet of paper of a certain size will depend on the source of the photons and the distance between the source and the paper.

For example, if we consider sunlight as the source of photons and assume that the paper is placed at a distance of 1 meter from the source, then the number of photons per second that strike the paper can be estimated to be around 10^18 (1 followed by 18 zeros) photons per second. However, if we consider a laser beam as the source of photons and assume that the paper is placed at a much closer distance, say 1 centimetre, then the number of photons per second that strike the paper will be much higher. In general, the number of photons per second that strike a sheet of paper will depend on various factors such as the energy of the photons, the intensity of the light source, and the distance between the source and the paper.

Learn more about Photons here: brainly.com/question/28134171

#SPJ11

The kw of pure water at 53.2°C if the pH is 7.1 is equal to 4.21e⁻¹².

The pH of the solution is 3.19.

The percent ionization of a weak acid is 0.0000000000000000000000000000000000000000016.

The pH of the Ba(OH)₂  is 13.04.

Question 4:At 53.2°C, the Kw of water is 4.21e-12, which is calculated using the equation Kw = [H+][OH-] and the fact that at pH 7.1, the concentration of H+ ions is equal to the concentration of OH- ions.

Question 5:Using the Ka value for aspirin, the concentration of H+ ions in a 0.28 M solution of aspirin can be calculated as 3.98e-5. The pH of the solution is then determined using the equation pH = -log[H+], resulting in a pH of 3.19.

Question 6:The percent ionization of a weak acid is given by the equation % ionization = [H+]/[HA] × 100. Using the Ka value and the initial concentration of acetic acid, the concentration of H+ ions can be calculated as 5.18e-29.

Dividing this by the initial concentration of acetic acid and multiplying by 100 gives a percent ionization of 0.0000000000000000000000000016.

Question 7:Ba(OH)2 is a strong base that dissociates completely in water, resulting in the formation of 2 OH- ions. Using the concentration of OH- ions, the pOH of the solution can be calculated as 0.33. Subsequently, the pH of the solution is found using the equation pH + pOH = 14, resulting in a pH of 13.04.

For more questions like pH click the link below:

https://brainly.com/question/15289741

#SPJ11

The kw of pure water at 53.2°C if the pH is 7.1 is equal to 4.21e⁻¹².

The pH of the solution is 3.19.

The percent ionization of a weak acid is 0.0000000000000000000000000000000000000000016.

The pH of the Ba(OH)₂  is 13.04.

Question 4:At 53.2°C, the Kw of water is 4.21e-12, which is calculated using the equation Kw = [H+][OH-] and the fact that at pH 7.1, the concentration of H+ ions is equal to the concentration of OH- ions.

Question 5:Using the Ka value for aspirin, the concentration of H+ ions in a 0.28 M solution of aspirin can be calculated as 3.98e-5. The pH of the solution is then determined using the equation pH = -log[H+], resulting in a pH of 3.19.

Question 6:The percent ionization of a weak acid is given by the equation % ionization = [H+]/[HA] × 100. Using the Ka value and the initial concentration of acetic acid, the concentration of H+ ions can be calculated as 5.18e-29.

Dividing this by the initial concentration of acetic acid and multiplying by 100 gives a percent ionization of 0.0000000000000000000000000016.

Question 7:Ba(OH)2 is a strong base that dissociates completely in water, resulting in the formation of 2 OH- ions. Using the concentration of OH- ions, the pOH of the solution can be calculated as 0.33. Subsequently, the pH of the solution is found using the equation pH + pOH = 14, resulting in a pH of 13.04.

For more questions like pH click the link below:

https://brainly.com/question/15289741

#SPJ11

At 28°C. the partial pressure of N₂ in the mixture of He, N₂, and Ar is 5,650 torr.

To determine the partial pressure of N₂ in the mixture, we first convert all the given values into one consistent unit, then use Dalton's Law of partial pressures.

1. Convert the total pressure to a consistent unit. Since the partial pressures of He and Ar are given in torr and mmHg, let's convert the total pressure from atm to torr:
Total pressure in torr = 14.8 atm * (760 torr / 1 atm) = 11,248 torr

2. Since 1 torr = 1 mmHg, we can use either unit for our calculations. Let's use torr.

3. Use Dalton's Law of partial pressures to find the partial pressure of N₂:
Total pressure = P(He) + P(Ar) + P(N₂)
11,248 torr = 2,645 torr + 2,953 torr + P(N₂)

4. Solve for P(N₂):
P(N₂) = 11,248 torr - 2,645 torr - 2,953 torr
P(N₂) = 5,650 torr

The partial pressure of N₂ in the mixture is 5,650 torr.

Learn more about Dalton's Law of partial pressures here: https://brainly.com/question/19975849

#SPJ11

NaOH is not a good choice as a base in this reaction because it is a strong base and can lead to undesirable side reactions.

Strong bases like NaOH can deprotonate more acidic protons present in the reactants or solvents, causing unwanted by-products and decreased yields. Additionally, strong bases like NaOH can be difficult to control, potentially causing the reaction to proceed too quickly or uncontrollably, which could result in incomplete conversion of the reactants or damage to the desired product.

In contrast, using a weaker base would allow for better control of the reaction, minimizing side reactions and ensuring higher yields of the desired product. Therefore, it is crucial to select a suitable base for a particular reaction, taking into account the strength and potential side effects of the base, and NaOH may not be the optimal choice in this specific case. NaOH is not a good choice as a base in this reaction because it is a strong base and can lead to undesirable side reactions.

Learn more about weaker base at:

https://brainly.com/question/428501

#SPJ11

The solubility of CuI in a 0.32 M KCN solution is 1.03 M.

To find the solubility, first determine the reaction quotient (Q) for CuI dissolving in KCN:

CuI(s) + 2 KCN(aq) -> Cu(CN)2⁻(aq) + 2 K⁺(aq) + I⁻(aq)

Ksp(CuI) = [Cu⁺][I⁻] = 1.1 x 10⁻¹²
Kf(Cu(CN)2⁻) = [Cu(CN)2⁻]/([Cu⁺][CN⁻]^2) = 1 x 10²⁴

Now, set up the equilibrium equation with the given concentrations:
Q = [Cu(CN)2⁻]/([Cu⁺][0.32]²)

Since Q > Ksp, the reaction shifts right, and CuI dissolves. Substitute the Kf expression into the Q equation and solve for [Cu⁺]:
[Cu⁺] = (1 x 10²⁴)/[CN⁻]² = (1 x 10²⁴)/(0.32)²= 1.03 M

Thus, the solubility of CuI in a 0.32 M KCN solution is 1.03 M.

To know more about reaction quotient click on below link:

https://brainly.com/question/30200804#

#SPJ11

Answer:

The four different types of organic molecules in living organisms are carbohydrates, lipids, proteins, and nucleic acids. Carbohydrates are composed of carbon, hydrogen, and oxygen atoms and are a source of energy for the body. Lipids are composed of carbon, hydrogen, and oxygen atoms and are important for energy storage, insulation, and cell membrane structure. Proteins are composed of amino acids and are involved in various biological functions, such as enzyme catalysis, muscle contraction, and immune response. Nucleic acids are composed of nucleotides and store genetic information. All four types of organic molecules are essential for life and work together to maintain biological processes.

c. Isocitrate dehydrogenase is a citric acid cycle enzyme that is also an example of an iron-sulfur protein.

This enzyme plays a crucial role in cellular respiration by catalyzing the conversion of isocitrate to alpha-ketoglutarate. It is also an example of an iron-sulfur protein because it contains a cluster of iron and sulfur atoms in its active site, which are essential for its catalytic activity. This enzyme is found in both prokaryotes and eukaryotes and is regulated by various factors such as substrate availability, pH, and allosteric modulators.

Mutations in the genes encoding for isocitrate dehydrogenase have been linked to various diseases such as cancer and neurodegenerative disorders. Overall, isocitrate dehydrogenase plays a vital role in energy metabolism and is an excellent example of the complex interplay between protein structure, function, and regulation in biological systems. c. Isocitrate dehydrogenase is a citric acid cycle enzyme that is also an example of an iron-sulfur protein.

Learn more about enzyme at:

https://brainly.com/question/29774898

#SPJ11

The pH during the titration of 30.00 mL of 0.1000 M methylamine having 0.1000 M HCl after 22 mL of the acid have been added is 3.54.

To determine the pH during the titration of a weak base with a strong acid, we need to find the moles of base initially present and the moles of acid added. Then, we use the balanced chemical equation to determine the moles of acid and base that react, and we use the equilibrium expression for the weak base to determine the concentration of the hydroxide ions present in solution.

Determine the moles of methylamine initially present;

moles of methylamine = (30.00 mL)(0.1000 M) = 0.00300 mol

Determine the moles of HCl added;

moles of HCl = (22.00 mL)(0.1000 M) = 0.00220 mol

Determine the limiting reagent and the moles of base that react;

HCl is the limiting reagent because it is added in a smaller amount. The moles of base that react are equal to the moles of HCl added.

Determine the concentration of methylammonium ion at equilibrium;

(CH₃)NH₃⁺ + H₂O ⇌ (CH₃)NH₂ + H₃O⁺

Kb = [CH₃NH₂][H₃O⁺] / [CH₃NH₃⁺]

At equilibrium, [CH₃NH₂] = 0.00300 - 0.00220 = 0.00080 M

[CH₃NH₃⁺] = [HCl] = 0.00220 M

Kb = (0.00080)(x) / 0.00220

x = [H₃O⁺] = 2.91 x 10⁻⁴ M

Determine the pH;

pH = -log[H₃O⁺]

= -log(2.91 x 10⁻⁴)

= 3.54

To know more about titration here

https://brainly.com/question/2728613

#SPJ4

To calculate the volume of water added to the 0.510 L of 0.0440 M sodium hydroxide to obtain a 0.0260 M solution, follow these steps:

1. Determine the initial moles of sodium hydroxide in the solution:
Moles = Molarity x Volume
Moles = 0.0440 mol/L x 0.510 L = 0.02244 mol

2. Determine the final volume needed to obtain a 0.0260 M solution:
Volume = Moles / Molarity
Volume = 0.02244 mol / 0.0260 mol/L = 0.863 L

3. Since volumes are additive at these low concentrations, calculate the volume of water added:
Volume of water added = Final volume - Initial volume
Volume of water added = 0.863 L - 0.510 L = 0.353 L

Therefore, you need to add 0.353 L of water to the 0.510 L of 0.0440 M sodium hydroxide to obtain a 0.0260 M solution.

https://brainly.com/question/31485541

#SPJ11

To solve this problem, we can use the Henderson-Hasselbalch equation for a buffer solution the pH of the buffer solution after 0.180 mol of NaOH is added is 8.59.

The concentration of a solution refers to the amount of solute dissolved in a given amount of solvent or solution. Solutions can be diluted by adding more solvent or concentrated by removing some of the solvent. The properties of a solution, such as its boiling point or freezing point, may differ from those of the pure solvent due to the presence of the solute.

A solvent is a substance that has the ability to dissolve other substances to form a homogeneous mixture called a solution. In a solution, the solvent is the component that is present in the largest amount and is responsible for dissolving the solute

To know more about solution visit :

https://brainly.com/question/30665317

#SPJ1

In general, the following factors increase the rate of SN2 reactions:
1. Decreased steric hindrance around the electrophilic carbon
2. Increased nucleophilicity of the attacking nucleophile
3. Increased leaving group ability of the leaving group

With these factors in mind, the compounds can be ranked in order of increasing rates of SN2 reactions as follows:

1. tert-butyl chloride (most hindered)
2. isopropyl chloride
3. ethyl chloride
4. methyl chloride (least hindered)

So, the correct order from slowest to fastest SN2 reaction is: tert-butyl chloride, isopropyl chloride, ethyl chloride, and methyl chloride.

To know more about SN2 reactions:

https://brainly.com/question/27060397

#SPJ11