Answer:
did u get the answer yet
Explanation:
At room temperature, all the metalloids are solids, while most nonmetals are
Answer:
at their own state.
That leaves only five elements: carbon, phosphorus, sulfur, selenium, and iodine, which are all non-metals and are solid at room temperature.
which of the following is the most dangerous type of radiation?
gamma decay, alpha decay, beta, decay, they are all equally dangerous
Answer:
gamma decay
Explanation:
gamma rays have the highest frequency on the EM spectrum, which makes them the most dangerous.
Large networks of ators covalently bonded together are called:
a) Giant covalent structures
b) Molecular structures
c) Giant ionic lattices
d) Superconductors
Answer:
Giant Covalent Structures, Diamond and Graphite are giant covalent structures since they're allotropes of Carbon.
Answer:
Giant covalent structures contain very many atoms. , each joined to adjacent atoms by covalent bonds. The atoms are usually arranged into giant regular lattices - extremely strong structures because of the many bonds involved.
as the distance from the nucleus increases, what happens?
The nuclear effective charge decreases as the energy of repulsion between the atoms increases between one another. The farther away an atom is from the nucleus, the more loosely that is attracted to that nucleus.
how to tell if an electron will make a cation or anion
Which of the following statements is true about atomic spectra? I. The line spectra of elements are evidence that electron energies are quantized II. Energy is emitted from atoms as they move from lower energy levels to higher energy levels III. Energy is emitted from atoms as they move from higher energy levels to lower energy levels IV. Neutral atoms in the ground state emit light spontaneously
The line spectra of an atom offers conclusive evidence that electron energies are quantized.
Neils Bohr showed that electrons in an atom can absorb or emit energy when they move from one energy level to another. This principle is the basis upon which the spectra of atoms is built.
The true statements about the atomic spectra is;
The line spectra of elements are evidence that electron energies are quantized Energy is emitted from atoms as they move from higher energy levels to lower energy levelsLearn more about atomic spectrum: https://brainly.com/question/2049494
The barometric pressure in Breckenridge, Colorado (elevation 9600 ft) is 580 mmHg. How many kPa is this?
Answer:
1 atmospheric pressure = 760.0 mm Hg
Thus 580 mm Hg = (580 mm Hg/(760 mm Hg/atm))
= 0.763 atm
Particulate Electrical Forces Unit Test for Connexus, Chemistry A
I've already finished the questions, but im stuck on the written parts 16-18, can anyone give a hand? :(
I’m sorry no one helped you with those questions. But could you please be a doll and give me the answer for the multiple-choice questions 1-15. Pleaseee I’m so desperate.?
how many atoms of mercury are in 50.15 g of mercury?
Answer:
please mark brainliest
Explanation:
The correct answer to this question is 0.2500 mol
Formula to calculate moles:
Moles = mass ÷ molar mass (n=m/M)
Mass = 50.15g
Atomic mass: 200.59 amu
Moles = 50.15g/200.59
= 0.2500 mol.
Calculate the following examples.
1. Ramji conducted an experiment in the field related to the rate of percolation. He observed that it took 30 minutes for 600 ml of water to percolate through the soil. Calculate the rate of percolation per hour.
2. Jigna takes 50g of dry powdered soil in a filter paper and slowly adds water to the soil from a 100 ml fully filled measuring cylinder. When water starts dripping from the filter paper, 60 ml of water is left in the measuring cylinder. Find out the percentage of water absorbed by the soil.
Answer:
12ml per hour and
69% LOL
1) The rate of percolation would be 0.33 ml/s
Percolation rate = volume of water/time
= 600/1800s
= 0.33 ml/s
2) The percentage of water absorbed would be 40%
Percentage of water absorbed = amount absorbed/total water x 100
amount of water absorbed = 100 - 60
= 40 ml
total amount of water = 100 ml
Percentage of water absorbed = 40/100 x 100
= 40%
More on numerical calculations can be found here; https://brainly.com/question/24638543?referrer=searchResults
how many moles of copper are there in 6.93 g of copper sample
pls be quick
[tex]\\ \sf\longmapsto No\:of\;moles=\dfrac{Given\:mass}{Molar\:mass}[/tex]
[tex]\\ \sf\longmapsto No\:of\:moles=\dfrac{6.93}{63.5}[/tex]
[tex]\\ \sf\longmapsto No\:of\:moles=0.109\approx 1.11moles[/tex]
The particles in a metal are held together by strong __________ bonds. What word describes the type of bond to complete this sentence?
Answer:
metallic
Explanation:
The dislocated electrons moving around the protons create opposite charges with electrostatic attraction between them that are very strong, and are called metallic bonds.
The particles in a metal are held together by strong metallic bonds . The metals forms crystalline solids with highly ordered lattice structure.
What are metals?Metals are electropositive elements. They are rich in electrons and easily donate their electrons with non-metals to form ionic bonds. Metals gain positive charge by losing electrons.
Metals in periodic table are classified as s block elements that are alkali metals and alkaline earth metals and d-block elements that are transition metals.
Metals forms highly ordered crystal lattice 3 D structures in which metal ions negative ions or electrons are bonded by strong intermolecular force called metallic bonds and the free electrons are located in the interstices.
These electrons can delocalize and conduct thermally and electrically.Hence, the bond which hold the particles in a metal is called metallic bond.
To find more on metallic bonds, refer here:
https://brainly.com/question/16026653
#SPJ2
what would happen if we lost our planets core on earth blew up, would we all die or will we lose gravity or suficate, pls help. :I
Answer: if we lost our core it would be an entire fallout like fallout 76 we would have no way to protect ourselves from the radiation of space except for a select few that actually own astronaut suits tho we would not turn into monsters, sadly :( I wanna be a ghoul
Helppppppppppppppppppppppppppppp
Answer:
A or B but im going to say A
Explanation:
hope this helped <3
Millikan determined the electron's ______ .
Answer
In 1909, Robert Millikan and Harvey Fletcher conducted the oil drop experiment to determine the charge of an electron. ... Using the known electric field and the values of gravity and mass, Millikan and Fletcher determined the charge on oil droplets in mechanical equilibrium.
Millikan and fletcher determined the charge on oil droplets in mechanical equilibrium
HEY!
have a good day
thank me later
carryonlearing
how would you expect the solubility of barium sulfate in pure water to compare to its solubility in 0.10 m nacl
Answer:
barium sulfate is insoluble (unable to dissolve) in water.
the general equation for the reaction between solid barium sulfate and nacl solution is this:
BaSO4 (s) + 2NaCl (aq) --> BaCl (aq) + Na2SO4 (aq)
to sum this up, to compare the solubility,
1. barium sulfate cant dissolve in pure water.
2. barium sulfate dissolves in nacl solution to give aqueous (aq) barium chloride (bacl) and aqueous sodium sulfate (na2so4), as shown in the equation above.
good luck!
The solubility of barium sulfate in pure water to zero as compare to the solubility in NaCl solution.
What is solubility?
Solubility is a property of any substance that defines how easily can be any substance will get dissolved or show dissolution.
Barium sulphate is insoluble in water beacuse it has higher lattice energy as well as higher size of cations & anions as compare to water, due to which water is not able to attract these ions towards itself affectively.Barium sulphate is soluble in the NaCl solution as this solution having ions which have more power to attract the ions of barium sulphate and show dissolution. Chemical reaction for this will be represented as:BaSO₄ (s) + 2NaCl (aq) → BaCl (aq) + Na₂SO₄ (aq)
Hence, barium sulphate is insoluble in water.
To know more about solubility, visit the below link:
https://brainly.com/question/16903071
4. A photon has an energy of 2.93x10^-25 Jouls. What is the
frequency? What is the wavelength in nm?
Answer:
Hope this answer helps
Explanation:
Tom pushes on a 50-kilogram box with a force of 25 newtons. Assuming the surface on which the box moves is frictionless, at what rate does the box accelerate?
Assuming the surface on which the box moves is frictionless, the rate at which the box accelerate is equal to 0.5 [tex]m/s^2[/tex].
Given the following data:
Mass of box = 50 kilogramForce = 25 newtons.To determine the rate at which the box accelerate, assuming the surface on which the box moves is frictionless:
Mathematically, Newton's Second Law of Motion is given by the formula;
[tex]Force = mass \times acceleration[/tex]
Making acceleration the subject of formula, we have:
[tex]Acceleration =\frac{Force}{mass}[/tex]
Substituting the given parameters into the formula, we have;
[tex]Acceleration = \frac{25}{50}[/tex]
Acceleration = 0.5 [tex]m/s^2[/tex]
Read more on Newton's Law of Motion here: https://brainly.com/question/1121817
Consider the reaction below. H2PO4â€"" H2O Right arrow. H3O HPO42â€"" Which of the following is a baseâ€""conjugate acid pair? H2O and H3O H2O and H2PO4â€"" H2PO4â€"" and HPO42â€"" H2PO4â€"" and H3O.
Taking into account the Brønsted-Lowry acid-base theory, a base/conjugate acid pair is H₂O/H₃O⁺.
The Brønsted-Lowry acid-base theory (or the Brønsted-Lowry theory) identifies acids and bases based on whether the species accepts or donates protons or H⁺.
According to this theory, acids are proton donors while bases are proton acceptors. That is, an acid is a species that donates an H⁺ proton while a base is a chemical species that accepts an H⁺ proton from the acid.
So, reactions between acids and bases are H⁺ proton transfer reactions, causing the acid to form its conjugate base and the base to form its conjugated acid by exchanging a proton.
In other words, a conjugate base is an ion or molecule resulting from the acid that loses the proton, while a conjugate acid is an ion or molecule resulting from the base that gains the proton:
acid + base ⇄ conjugate base + conjugate acid
In this case, you know:
H₂PO₄ + H₂O → H₃O⁺ + HPO₄⁻
H₂PO₄ behaves like acid because donates an H⁺ proton while H₂O behaves like base because accepts an H⁺ proton from the acid.
So, H₃O⁺ is the conjugate acid of the H₂O and HPO₄⁻ is conjugate base of H₂PO₄.
In summary, a base/conjugate acid pair is H₂O/H₃O⁺.
Learn more about the Brønsted-Lowry acid-base theory:
https://brainly.com/question/12916250?referrer=searchResultshttps://brainly.com/question/1191429?referrer=searchResultshttps://brainly.com/question/4000152?referrer=searchResultshttps://brainly.com/question/12808135?referrer=searchResultsThis is my class group-work with my friends but we are stuck on this question.
Explanation:
It has to be C, because Carbon can bond with four other atoms and is like a four-hole wheel.
(Sorry if my elplanation was kinds choppy Oof, helpfully it makes sense?)
The atomic mall mass is an element depends upon the.
Answer:
Mass and relative abundance of each isotope of that element
The atomic mass of element has been dependent on mass of each isotopes and their abundance in nature.
The atomic mass has been the mass of neutrons and protons of the element. There has been the presence of the isotopes of the elements, with varying abundance, and varying atomic masses.
The atomic mass of the element has been the relative average atomic mass of the element with respect to the mass of the isotopes and their percent abundance.
The average atomic mass (amu) has been given by:
[tex]amu=M_1A_1\;+\;M_2A_2[/tex]
Where, [tex]M_1A_1[/tex] has been the atomic mass and abundance of isotope 1.
[tex]M_2A_2[/tex] has been the atomic mass and abundance of isotope 2.
Thus, the average atomic mass has been dependent on mass of each isotopes and their abundance in nature.
For more information about the atomic mass, refer to the link:
https://brainly.com/question/5566317
Why are the three atoms are isotopes of magnesium
Answer:
Magnesium is a naturally ubiquitous; (appearing & found evrywhere) element and has three naturally occurring stable isotopes, 24Mg, 25Mg and 26Mg, with relative abundance of 78.99%, 10.00% and 11.01%, respectively.
However, they differ only because a 24Mg atom has 12 neutrons in its nucleus, a 25Mg atom has 13 neutrons, and a 26Mg has 14 neutrons.
Explanation:
Melting gold with other metals makes 10-karat gold. Which term best describes 10-karat gold?
compound
homogeneous mixture
heterogeneous mixture
pure substance
Answer:
I think its a homogeneous mixture (pls correct me if im wrong)
Explanation:
It is a homogeneous mixture because its an alloy made of gold, silver, copper, and other metals that are melted together. A homogeneous mixture is composed of a uniform composition of particles.
There are two types of mixture, one is homogeneous mixture and other is heterogeneous mixture. Therefore, the term best describes 10-karat gold is homogeneous mixture.
What is mixture?When two or more compounds are combined but each ingredient retains its chemical identity, the result is referred to as a mixture. In other words, there is no chemical interaction between the parts of a combination. According to how consistent they are and how well the components' particle sizes match up, mixtures are categorized.
Because it is an alloy comprised of melted gold, silver, copper, and other metals, it is a homogenous combination. A homogeneous mixture has a consistent distribution of its constituent particles.
Therefore, the term best describes 10-karat gold is homogeneous mixture.
To know more about mixture, here:
https://brainly.com/question/12160179
#SPJ2
This boy said he was finna destroy me and winked what does that mean
Answer:
pipe
Explanation:
You receiving
Each cart below is pushed across a room with the same amount of force. Which cart will result in the greatest change in speed?
F.A 75 kg cart being pushed with a 200 N force
G.A 125 kg box being pushed with a 200 N force
H.A 350 kg box being pushed with a 200 N force
J.A 450 kg cart being pushed with a 200 N force
The cart with the greatest change in speed is the cart with a mass of 75 Kg
Acceleration is defined as the change in velocity of an object with time. Also, acceleration is related to the force and mass according to the following equation:
Acceleration (a) = Force (F) / mass (m)
a = F / mTo answer the question, we shall determine the acceleration of each cart.
For cart of mass 75 kgMass (m) = 75 KgForce (F) = 200 NAcceleration (a) =?a = F / m
a = 200 / 75
a = 2.67 m/s²For cart of mass 125 kgMass (m) = 125 KgForce (F) = 200 NAcceleration (a) =?a = F / m
a = 200 / 125
a = 1.6 m/s²For cart of mass 350 kgMass (m) = 350 KgForce (F) = 200 NAcceleration (a) =?a = F / m
a = 200 / 350
a = 0.57 m/s²For cart of mass 450 kgMass (m) = 450 KgForce (F) = 200 NAcceleration (a) =?a = F / m
a = 200 / 450
a = 0.44 m/s²From the above illustrations, we can see that the cart with a mass of 75 K has the greatest change in speed (i.e 2.67 m/s²)
Learn more about acceleration: https://brainly.com/question/390784
Answer:
D
Explanation:
F. 200-75=125
G. 20-125=75
H. 350-200=150
J. 450-200=250
250 is the biggest number so it has the biggest change
dose any body know 2(-3+6)=
______
3
Answer: The answer is 6
1) Simplify -3+6 to 3.
2×3
And then Simplify.
6
Sorry if im wrong
the atomic number is the same as the number of which subatomic particle?
Who thought fire was one of four elements?
O A. Aristotle
O B. Marie Curie
O C. John Dalton
O D. Robert Boyle
Answer:
D Robert Boyle
Explanation:
Pls Help Me (20 Points)
In one to two sentences, describe an experiment that would show that intramolecular forces (attractions between atoms within molecules) are stronger than intermolecular forces (attractions between molecules).
Answer:
If the molecules have similar molar masses and similar types of intermolecular forces, look for the one that is the most polar or that has the most electronegative atoms or the most hydrogen bonding groups. That one will have the strongest IMF's overall.
Explanation:
An experiment that would show that intramolecular forces are stronger than intermolecular forces will be heating a block of ice in a sealed container then allowing it to change to steam.
Intramolecular forces are the forces of attraction that hold atoms together within a molecule. Intramolecular forces require a high amount of energy to splits atoms or molecules in a chemical bonding.
Intermolecular forces are weaker forces of attraction that occur between molecules. They require lesser energy to splits molecules compared to intramolecular forces.
An experiment that show that intramolecular forces are stronger than intermolecular forces will be heating a block of ice in a sealed container then allowing it to change to steam.
In the process, the energy required to change the state from ice to steam water is more than intermolecular forces.
Thus, we can conclude that this experiment shows that the intramolecular forces are stronger than the intermolecular forces.
Learn more:
https://brainly.com/question/14220340
Welcome to my attic. I'm positive
that there are a lot of metals in
here.
Answer:
Gold Iron Titanium Lithium
Explanation: