rovide a structure for the given compound. c6h12o2;c6h12o2; ir: 1743 cm−1;1743 cm−1; h1h1 nmr spectrum

Based on the information provided, the compound has a molecular formula of C5H11NO and an IR absorption at around 3400 cm-1. The IR absorption at 3400 cm-1 suggests the presence of an N-H bond, which is characteristic of an amine functional group. Therefore, the structure consistent with this spectrum should have an amine group (-NH2) attached to the carbon skeleton.

Structure A has a molecular formula of C5H11NO and contains an amine group (-NH2) attached to the end of the alkyl chain. However, its H NMR spectrum would show a peak at around 1.5 ppm for the amine group, which is not observed in the given spectrum. Therefore, structure A is not consistent with the spectra.
Structure B has a molecular formula of C5H11NO and contains an amine group (-NH-) attached to the methine carbon adjacent to the nitrogen atom. This is consistent with the H NMR spectrum, which shows a peak at 2.2 ppm for the methine group, as well as the IR spectrum, which shows an absorption at 3400 cm-1 for the N-H bond. Therefore, structure B is the most likely candidate for the compound with the given spectra.
Structure C has a molecular formula of C5H11NO2 and contains a carboxylic acid group (-COOH) attached to the end of the alkyl chain. This would produce a very different set of spectra, including a broad peak in the H NMR spectrum around 10-12 ppm for the carboxylic acid proton and a strong absorption in the IR spectrum around 1700 cm-1 for the carbonyl group. Therefore, structure C is not consistent with the spectra.

To know more about absorption visit :-

https://brainly.com/question/14286976

#SPJ11

The rate law for the single-step reaction OH + CH₃Br → CH₃OH + Br can be written as:
Rate = k[OH][CH₃Br]

The rate law, also known as the rate equation, is a mathematical expression that describes how the rate of a chemical reaction depends on the concentrations of its reactants. It is an important concept in chemical kinetics, which is the study of the rates of chemical reactions.

The rate law typically takes the form of an equation that relates the rate of the reaction (in terms of the change in concentration of a reactant or product per unit time) to the concentrations of the reactants.

For the given reaction, the rate law is:

Rate = k[OH][CH₃Br]

Here, 'k' is the rate constant, and [OH] and [CH₃Br] represent the concentrations of the reactants OH and CH₃Br, respectively.

Learn more about rate law here: https://brainly.com/question/16981791

#SPJ11

In a Friedel-Crafts Acylation Reaction, toluene reacts with CH3CH2CH2COCl and FeCl3.

The methyl group (CH3) attached to the benzene ring is the alkyl substituent that is activating group because they donate electron density to the benzene ring (toluene), making it more nucleophilic (Nu-) and more reactive towards electrophilic (E+) aromatic substitution reactions.

As an activating group, the methyl group directs the incoming electrophile to the ortho and para positions on the benzene ring. This is because the methyl group of toluene increases electron density at ortho and para positions only, making them more nucleophilic and thus more attractive to the electrophile.

Therefore, in the case of Friedel-Crafts Acylation, the acylation is directed primarily to the ortho and para positions, not meta, forming ortho- and para-substituted products.

https://brainly.com/question/31485900

#SPJ11

The answer is e. Y (yttrium) has the smallest number of unpaired electrons in the ground state, with zero unpaired electrons.

Fe2 (iron) has four unpaired electrons, Pd4 (palladium) has two unpaired electrons, Cr3 (chromium) has three unpaired electrons, and Tc4 (technetium) has four unpaired electrons.

Based on the given options, element Y (yttrium) has the smallest number of unpaired electrons in its ground state.

Yttrium (Y) has an atomic number of 39, which corresponds to an electron configuration of [Kr] 5s² 4d¹. In this configuration, Y has only one unpaired electron. In comparison, the other options have more unpaired electrons in their ground states.

Visit here to learn more about  (yttrium) : https://brainly.com/question/12054275
#SPJ11

The answer is e. Y (yttrium) has the smallest number of unpaired electrons in the ground state, with zero unpaired electrons.

Fe2 (iron) has four unpaired electrons, Pd4 (palladium) has two unpaired electrons, Cr3 (chromium) has three unpaired electrons, and Tc4 (technetium) has four unpaired electrons.

Based on the given options, element Y (yttrium) has the smallest number of unpaired electrons in its ground state.

Yttrium (Y) has an atomic number of 39, which corresponds to an electron configuration of [Kr] 5s² 4d¹. In this configuration, Y has only one unpaired electron. In comparison, the other options have more unpaired electrons in their ground states.

Visit here to learn more about  (yttrium) : https://brainly.com/question/12054275
#SPJ11

The kind of intermolecular forces that act between a chlorine monofluoride (ClF) molecule and a nitrosyl chloride (NOCl) molecule include a. dispersion forces and d. dipole-dipole interactions.

Dispersion forces, also known as London dispersion forces or van der Waals forces, are present between all molecules due to temporary fluctuations in electron distribution, leading to temporary dipoles. Both ClF and NOCl are polar molecules, as the electronegativity difference between the atoms results in a dipole moment. The positive end of one molecule is attracted to the negative end of another, leading to dipole-dipole interactions.

Ion-dipole and hydrogen-bonding forces do not apply in this case, as there are no ions or hydrogen atoms bonded to highly electronegative atoms (such as nitrogen, oxygen, or fluorine) in the ClF and NOCl molecules. Therefore, the intermolecular forces between ClF and NOCl are dispersion forces and dipole-dipole interactions. The kind of intermolecular forces that act between a chlorine monofluoride (ClF) molecule and a nitrosyl chloride (NOCl) molecule include a. dispersion forces and d. dipole-dipole interactions.

Learn more about London dispersion forces at:

https://brainly.com/question/20514601

#SPJ11

The pH of a solution where the HF concentration is 0.10 M and the NaF concentration is 0.30 M, with Ka = 7.2 x 10⁻⁴ is 3.62.

To calculate the pH of a solution where the HF concentration is 0.10 M and the NaF concentration is 0.30 M, with Ka = 7.2 x 10⁻⁴, we can use the Henderson-Hasselbalch equation:

pH = pKa + log([A⁻]/[HA])

First, determine the pKa from the given Ka value:

pKa = -log(Ka)

= -log(7.2 x 10⁻⁴)

≈ 3.14

Next, plug in the concentrations of the weak acid ([HA] = 0.10 M) and its conjugate base ([A³] = 0.30 M) into the equation:

pH = 3.14 + log(0.30/0.10)

= 3.14 + log(3)

Finally, calculate the pH:

pH ≈ 3.14 + 0.48

≈ 3.62

So, the pH of the solution is approximately 3.62.

Learn more about pH: https://brainly.com/question/5219570

#SPJ11

(a) 0.1000M Propanoic acid [tex](HC_{3} H_{5} O_{2} , Ka= 1.3x10^{-5} )[/tex]

To calculate the pH of the solution, we first need to calculate the concentration of [tex]H^{+}[/tex] ions in the solution. We can use the expression for the ionization constant of the acid to calculate this:

[tex]Ka = [H^{+} ][C_{3} H_{5} O_{2} -]/[HC_{3} H5_{5} O_{2} ][/tex]

Let x be the concentration of [[tex]H^{+}[/tex]] in M.

[tex]1.3x10^{-5} = x^2/0.1000-x[/tex]

[tex]0.0000013 = x^2/(0.1000-x)[/tex]

Assuming x << 0.1000, we can simplify the denominator to 0.1000.

[tex]0.0000013 = x^2/0.1000[/tex]

x = sqrt(0.0000013*0.1000) = 0.000361 M

Now, we can calculate the pH of the solution:

[tex]pH = -log[H^{+} ] = -log(0.000361) = 3.44[/tex]

(b) 0.1000M Sodium propanoate ([tex]NaC_{3} H_{5} O_{2}[/tex])

Sodium propanoate is a salt of the weak acid propanoic acid, and it will hydrolyze in water to produce [tex]OH^{-}[/tex] ions.

[tex]NaC_{3} H_{5} O_{2} + H_{2} O[/tex] →  [tex]C_{3} H_{5} O_{2-} + Na^{+} + OH^{-}[/tex]

To calculate the pH of the solution, we first need to calculate the concentration of [tex]OH^{-}[/tex] ions in the solution. We can use the expression for the ionization constant of the water to calculate this:

[tex]Kw = [H^{+} ][OH^{-} ] = 1.0 x 10^{-14}[/tex]

Let x be the concentration of [[tex]OH^{-}[/tex]] in M.

x = Kw/[[tex]H^{+}[/tex]] = [tex]1.0 x 10^-14/0.1000[/tex]

[tex]x = 1.0 x 10^{-13 M}[/tex]

Now, we can calculate the pH of the solution:

pH = 14 - pOH = 14 - (-log[[tex]OH^{-}[/tex]]) = 14 - (-log(1.0 x [tex]10^{-13}[/tex])) = 11.00

(c) 0.1000M [tex]HC_{3} H_{5} O_{2}[/tex] and 0.1000M [tex]NaC_{3} H_{5} O_{2}[/tex]

The solution is a mixture of weak acid and its conjugate base. To calculate the pH of the solution, we can use the Henderson-Hasselbalch equation:

[tex]pH = pKa + log([C_{3} H_{5} O_{2} -]/[HC_{3} H_{5} O_{2} ])[/tex]

pKa for[tex]HC_{3} H_{5} O_{2}[/tex] is 4.89.

[[tex]HC_{3} H_{5} O_{2}[/tex]] = 0.1000 M

[[tex]C_{3} H_{5} O_{2} -[/tex]] = 0.1000 M

pH = 4.89 + log(0.1000/0.1000) = 4.89

(d) After 0.020 mol of HCl is added to 1.00 L solution of (a) and (b) above.

(a) In this case, we have to add 0.020 mol of HCl to the initial 0.1000 M [tex]HC_{3} H_{5} O_{2}[/tex] solution. The reaction between HCl and [tex]HC_{3} H_{5} O_{2}[/tex] is:

[tex]HC_{3} H_{5} O_{2} + HCl → C_{3} H_{5} O_{2} + H_{2} O + Cl^{-}[/tex]

The reaction goes to completion, and we can assume that all [tex]HC_{3} H_{5} O_{2}[/tex]has been converted to[tex]C_{3} H_{5} O_{2-} .[/tex]

Learn more  about Sodium propanoate

https://brainly.com/question/28303500

#SPJ4

Answer:

The classification of a chemical as an alkane is based on its molecular formula and structure, which should only contain carbon and hydrogen atoms and have a continuous, unbranched chain of carbon atoms bonded together by single covalent bonds.

Explanation:

An alkane is a type of hydrocarbon compound that only consists of carbon and hydrogen atoms that are bonded together exclusively by single covalent bonds. These bonds allow for saturated carbon chains that form the backbone of the alkane molecule.

Chemicals can be classified as alkanes if they satisfy the above conditions. For example, methane (CH4), ethane (C2H6), propane (C3H8), butane (C4H10), and pentane (C5H12) are all examples of alkanes.

The justification for classifying a chemical as an alkane depends on its molecular formula and its structure. If a chemical only contains carbon and hydrogen atoms and all of the bonds between these atoms are single covalent bonds, then it can be classified as an alkane. Additionally, the chemical's structure must have a continuous, unbranched chain of carbon atoms.

For instance, octane (C8H18) can be classified as an alkane because it only consists of carbon and hydrogen atoms bonded together by single covalent bonds, and its structure is an unbranched chain of eight carbon atoms.

The molality of the solution made by dissolving 36.0 g of Glucose in 64 g of H2O is 3.124 mol/kg.

The first step in solving this problem is to calculate the moles of glucose and the mass of water in the solution.

Moles of glucose = mass / molar mass = 36.0 g / 180.2 g/mol = 0.1999 mol

Mass of water = 64.0 g

Next, we can use the molality formula to calculate the molality of the solution:

Molality = moles of solute / mass of solvent (in kg)

Since we have the mass of solvent in grams, we need to convert it to kilograms:

mass of solvent (in kg) = 64.0 g / 1000 = 0.064 kg

Now we can plug in the values we have:

molality = 0.1999 mol / 0.064 kg = 3.124 mol/kg

Therefore, the molality of the solution is 3.124 mol/kg.

Know more about Molality here:

https://brainly.com/question/43644

#SPJ11

5. Based on electronegativity, the ranking of halonium ions by electrophilicity is: F+ > Cl+ > Br+ > I+. The most stable halogen is fluorine, and it is the least reactive. Iodine is the least electronegative halogen and is the most reactive.

6. The halogenated acetanilide 5 needs to be transformed into the amine 6 before introducing iodine into the ring because amide groups are less activating than amino groups. Iodine is a weak electrophile, and it requires a highly activated ring to introduce the iodonium ion (1+). The amino group is more activating than the amide group, and it will facilitate the introduction of the iodonium ion (1+).

7. The major products of the reactions below are:

a. NH2-1-Br
b. Br-C6H4-NH2
c. Br-C6H3-Cl-NH2
5. Based on electronegativity, the halonium ions can be ranked by their electrophilicity as follows:
F+ (1 - strongest electrophile), Cl+ (2), Br+ (3), and I+ (4 - weakest electrophile). The higher electronegativity of a halogen, the better it can accommodate a positive charge, making it more stable and less reactive.

6. The halogenated acetanilide 5 needs to be transformed into the amine 6 before introducing iodine into the ring because the activating power of the amide group in acetanilide is much weaker than the activating power of the amino group in aniline. This is important because the electrophilicity of the iodonium ion (I+) is low, and it requires a more powerful activating group for the reaction to proceed efficiently.

7. I cannot draw the major products of the reactions here, but I can describe them for you. For the transformation of compound 6 to 7, the reaction involves diazotization of 4-bromo-2-chloroaniline (6) using NaNO2 and H+ at 0°C to form the diazonium ion. The diazonium ion then undergoes a Sandmeyer reaction with an iodide ion to generate the target compound, 1-bromo-3-chloro-5-iodobenzene (7).

Visit here to learn more about electronegativity brainly.com/question/17762711

#SPJ11

5. Based on electronegativity, the ranking of halonium ions by electrophilicity is: F+ > Cl+ > Br+ > I+. The most stable halogen is fluorine, and it is the least reactive. Iodine is the least electronegative halogen and is the most reactive.

6. The halogenated acetanilide 5 needs to be transformed into the amine 6 before introducing iodine into the ring because amide groups are less activating than amino groups. Iodine is a weak electrophile, and it requires a highly activated ring to introduce the iodonium ion (1+). The amino group is more activating than the amide group, and it will facilitate the introduction of the iodonium ion (1+).

7. The major products of the reactions below are:

a. NH2-1-Br
b. Br-C6H4-NH2
c. Br-C6H3-Cl-NH2
5. Based on electronegativity, the halonium ions can be ranked by their electrophilicity as follows:
F+ (1 - strongest electrophile), Cl+ (2), Br+ (3), and I+ (4 - weakest electrophile). The higher electronegativity of a halogen, the better it can accommodate a positive charge, making it more stable and less reactive.

6. The halogenated acetanilide 5 needs to be transformed into the amine 6 before introducing iodine into the ring because the activating power of the amide group in acetanilide is much weaker than the activating power of the amino group in aniline. This is important because the electrophilicity of the iodonium ion (I+) is low, and it requires a more powerful activating group for the reaction to proceed efficiently.

7. I cannot draw the major products of the reactions here, but I can describe them for you. For the transformation of compound 6 to 7, the reaction involves diazotization of 4-bromo-2-chloroaniline (6) using NaNO2 and H+ at 0°C to form the diazonium ion. The diazonium ion then undergoes a Sandmeyer reaction with an iodide ion to generate the target compound, 1-bromo-3-chloro-5-iodobenzene (7).

Visit here to learn more about electronegativity brainly.com/question/17762711

#SPJ11

The expected optically active geometrical isomer for the octahedral complex Mn(en)₂F₂ is the cis-isomer.

To determine which geometrical isomers of the octahedral complex Mn(en)₂F₂ are expected to be optically active, let's first understand the terms involved:

1. Octahedral complex: A complex in which the central metal atom/ion is surrounded by six ligands in a symmetrical octahedral geometry.
2. Geometrical isomers: Different spatial arrangements of ligands around the central metal atom/ion in a complex.
3. Optically active: A compound that has the ability to rotate the plane of polarized light.

Now, let's consider the possible geometrical isomers of Mn(en)₂F₂:

1. cis-isomer: Both F atoms are adjacent to each other, and both en ligands are also adjacent to each other. In this case, the isomer will be optically active as it lacks a plane of symmetry.

2. trans-isomer: The F atoms are opposite to each other, and the en ligands are also opposite to each other. In this case, the isomer will not be optically active, as it has a plane of symmetry.

So, the cis-isomer is the expected optically active geometrical isomer for the octahedral complex Mn(en)₂F₂.

More on isomers: https://brainly.com/question/30174792

#SPJ11

The pH of the solution after the addition of NaOH is approximately 8.38.

To calculate the pH solution after the addition of NaOH first, let's calculate the initial concentration of the weak acid:

0.70 M = moles of weak acid / 0.323 L

moles of weak acid = 0.70 M * 0.323 L = 0.2261 moles

Now, let's calculate the amount of NaOH that will react with the weak acid:

43.2 gg NaOH = 43.2 / 40 g/mol = 1.08 mmol NaOH

Since NaOH is a strong base, it will react completely with the weak acid to form its conjugate base, so the moles of weak acid will be reduced by 1.08 mmol:

moles of weak acid remaining = 0.2261 moles - 1.08 mmol = 0.225 moles

Now, let's calculate the concentration of the conjugate base:

concentration of conjugate base = 1.08 mmol / 0.323 L = 3.35 mM

Using the Henderson-Hasselbalch equation, we can calculate the pH of the solution after the addition of NaOH:

pH = pKa + log([conjugate base] / [weak acid])

pH = 9.50 + log(3.35 mM / 0.225 M)

pH = 9.50 + log(0.00335 / 0.225)

pH = 9.50 - 1.12

pH = 8.38

Therefore, the pH of the solution after the addition of NaOH is approximately 8.38.

Learn more about pH solution

brainly.com/question/30934747

#SPJ11

The products of hydrobromic acid, HBr, reacting with magnesium hydroxide, Mg(OH)2, are magnesium bromide, MgBr2, and water, H2O. Therefore, the correct answer is MgBr2 and H2O.

Predict the products of hydrobromic acid (HBr) reacting with magnesium hydroxide (Mg(OH)2).
When HBr reacts with Mg(OH)2, an acid-base reaction occurs, producing a salt and water as the products. The resulting salt is formed by combining the magnesium cation (Mg²⁺) with the bromide anion (Br⁻). The water is formed by combining the hydrogen cation (H⁺) with the hydroxide anion (OH⁻).
Step-by-step explanation:
1. HBr + Mg(OH)2 → Mg²⁺ + 2Br⁻ + 2H⁺ + 2OH⁻
2. Combine Mg²⁺ and 2Br⁻ to form MgBr2.
3. Combine 2H⁺ and 2OH⁻ to form 2H2O.
The final products are MgBr2 and H2O. So, your answer is: MgBr2 and H2O.

Visit here to learn more about hydrobromic acid:

brainly.com/question/15231576

#SPJ11

The conversion factor is; 1 mol P / 2 mol CaHPO₄, there are 0.0545 g of phosphorus in 0.479 g of CaHPO₄, and this tablet provides 5.45% of the recommended daily value of phosphorus.

To relate moles of phosphorus to moles of calcium hydrogen phosphate, we need to use the molar mass of each compound. The molar mass of phosphorus is 30.97 g/mol, and the molar mass of CaHPO₄ is 136.06 g/mol. Therefore, the conversion factor is;

1 mol P / 2 mol CaHPO₄

To calculate the mass of phosphorus in 0.479 g of CaHPO₄, we first need to determine the number of moles of CaHPO₄;

0.479 g CaHPO₄ x (1 mol CaHPO₄ / 136.06 g CaHPO₄) = 0.00352 mol CaHPO₄

Using the conversion factor from part (a), we can convert moles of CaHPO₄ to moles of P;

0.00352 mol CaHPO₄ x (1 mol P / 2 mol CaHPO₄) = 0.00176 mol P

Finally, we can calculate the mass of P;

0.00176 mol P x 30.97 g/mol = 0.0545 g P

Therefore, there are 0.0545 g of phosphorus in 0.479 g of CaHPO₄.

To calculate the percentage of the daily value of phosphorus that comes from this tablet, we need to divide the mass of phosphorus in the tablet by the recommended daily value of phosphorus and multiply by 100%;

(0.0545 g P / 1.000 g P) x 100% = 5.45%

Therefore, this tablet provides 5.45% of the recommended daily value of phosphorus.

To know more about conversion factor here

https://brainly.com/question/6988886

#SPJ4

The conversion factor is; 1 mol P / 2 mol CaHPO₄, there are 0.0545 g of phosphorus in 0.479 g of CaHPO₄, and this tablet provides 5.45% of the recommended daily value of phosphorus.

To relate moles of phosphorus to moles of calcium hydrogen phosphate, we need to use the molar mass of each compound. The molar mass of phosphorus is 30.97 g/mol, and the molar mass of CaHPO₄ is 136.06 g/mol. Therefore, the conversion factor is;

1 mol P / 2 mol CaHPO₄

To calculate the mass of phosphorus in 0.479 g of CaHPO₄, we first need to determine the number of moles of CaHPO₄;

0.479 g CaHPO₄ x (1 mol CaHPO₄ / 136.06 g CaHPO₄) = 0.00352 mol CaHPO₄

Using the conversion factor from part (a), we can convert moles of CaHPO₄ to moles of P;

0.00352 mol CaHPO₄ x (1 mol P / 2 mol CaHPO₄) = 0.00176 mol P

Finally, we can calculate the mass of P;

0.00176 mol P x 30.97 g/mol = 0.0545 g P

Therefore, there are 0.0545 g of phosphorus in 0.479 g of CaHPO₄.

To calculate the percentage of the daily value of phosphorus that comes from this tablet, we need to divide the mass of phosphorus in the tablet by the recommended daily value of phosphorus and multiply by 100%;

(0.0545 g P / 1.000 g P) x 100% = 5.45%

Therefore, this tablet provides 5.45% of the recommended daily value of phosphorus.

To know more about conversion factor here

https://brainly.com/question/6988886

#SPJ4

According to the question the heat of reaction is 6,743 J.

Heat is a form of energy that is transferred from one object to another, typically due to a difference in temperature. Heat is produced through various processes, including chemical reactions, friction, and nuclear reactions. Heat is measured in units of temperature, such as Celsius, Fahrenheit, and Kelvin, and is typically expressed in terms of joules or calories. Heat can be transferred in three ways: conduction, convection, and radiation. Conduction is the transfer of heat through direct contact between two objects, while convection is the transfer of heat through liquids and gases.

The heat of reaction can be calculated using the equation q = mcΔT, where q is the heat of reaction, m is the mass of the solution, c is the specific heat capacity, and ΔT is the change in temperature.

Plugging in the values given, we get:

q = (70.7 mL)(1.00 g/mL)(4.184 J/g°C)(23.5°C)

q = 6,743 J

The heat of reaction is 6,743 J.

To learn more about heat

https://brainly.com/question/25603269

#SPJ4

The structures of the two benzylic bromides: 1. 1-Bromo-3,5-dimethyl-2-phenylhexane: This compound has the bromine atom at the 1st carbon, adjacent to the phenyl group. 2. 2-Bromo-3,5-dimethyl-2-phenylhexane: In this compound, the bromine atom is located at the 2nd carbon, next to the phenyl group and the methyl group at the 3rd carbon. Both of these benzylic bromides will undergo E2 elimination to give the desired product, (E)-3,5-dimethyl-2-phenyl-2-hexene.

Sure, the two benzylic bromides that give (e)-3,5-dimethyl-2-phenyl-2-hexene on E2 elimination are:

1. 1-bromo-3,5-dimethylbenzene
  CH3    Br
     \  /
      C-C
     /  \
  CH3   Ph
  The E2 elimination of the bromine and a proton on the carbon adjacent to the benzene ring leads to the formation of (e)-3,5-dimethyl-2-phenyl-2-hexene.

2. 4-bromo-1,3-dimethylbenzene
  CH3     Br
     \   /
      C-C
     /   \
  CH3   Ph
  Similar to the first example, the E2 elimination of the bromine and a proton on the carbon adjacent to the benzene ring leads to the formation of (e)-3,5-dimethyl-2-phenyl-2-hexene.

Learn more about benzylic bromides here: brainly.com/question/30510587

#SPJ11

The structures of the two benzylic bromides: 1. 1-Bromo-3,5-dimethyl-2-phenylhexane: This compound has the bromine atom at the 1st carbon, adjacent to the phenyl group. 2. 2-Bromo-3,5-dimethyl-2-phenylhexane: In this compound, the bromine atom is located at the 2nd carbon, next to the phenyl group and the methyl group at the 3rd carbon. Both of these benzylic bromides will undergo E2 elimination to give the desired product, (E)-3,5-dimethyl-2-phenyl-2-hexene.

Sure, the two benzylic bromides that give (e)-3,5-dimethyl-2-phenyl-2-hexene on E2 elimination are:

1. 1-bromo-3,5-dimethylbenzene
  CH3    Br
     \  /
      C-C
     /  \
  CH3   Ph
  The E2 elimination of the bromine and a proton on the carbon adjacent to the benzene ring leads to the formation of (e)-3,5-dimethyl-2-phenyl-2-hexene.

2. 4-bromo-1,3-dimethylbenzene
  CH3     Br
     \   /
      C-C
     /   \
  CH3   Ph
  Similar to the first example, the E2 elimination of the bromine and a proton on the carbon adjacent to the benzene ring leads to the formation of (e)-3,5-dimethyl-2-phenyl-2-hexene.

Learn more about benzylic bromides here: brainly.com/question/30510587

#SPJ11

To determine the mass of silver chloride that can be produced, we use balanced chemical equation:[tex]AgNO3 + NaCl → AgCl + NaNO3[/tex] A)  44.4 g of silver chloride can be produced from 1.33 l of a 0.234 m solution of silver nitrate  B) concentration of the calcium chloride solution is 0.156 M.

From the equation, we can see that 1 mole of silver nitrate  reacts with 1 mole of NaCl to produce 1 mole of silver nitrate. Therefore, we can use the given concentration of silver nitrate and the volume to calculate the moles of silver nitrate, and then use stoichiometry to determine the moles of  silver chloride produced

Moles of silver nitrate= concentration x volume = 0.234 mol/L x 1.33 L = 0.311 mol Moles of AgCl = Moles of silver nitrate  (from balanced equation) = 0.311 mol.

The molar mass of AgCl is 143.32 g/mol, so we can calculate the mass of AgCl produced: Mass of AgCl = Moles of AgCl x Molar mass of AgCl = 0.311 mol x 143.32 g/mol = 44.4 g

To calculate the concentration of the calcium chloridesolution, we need to divide the moles of calcium chloride by the volume in liters: Concentration = Moles of calcium chloride/ Volume = 0.622 moles / 3.98 L = 0.156 M Therefore, the concentration of the calcium chloride solution is 0.156 M.

Know more about molar mass here:

https://brainly.com/question/22997914

#SPJ11

The concentration units that are temperature dependent are molality (B) and molarity (D). Mole fraction (A), mass percent (C), and other concentration units are not temperature dependent.

Which concentration units are temperature dependent?

Molality and molarity are concentration units that are temperature dependent because they are defined based on the amount of solute dissolved in a fixed amount of solvent, which can change with temperature.

Molality is defined as the number of moles of solute per kilogram of solvent, so it is based on the mass of the solvent, which can vary with temperature due to thermal expansion or contraction.

Molarity is defined as the number of moles of solute per liter of solution, so it is based on the volume of the solution, which can also vary with temperature due to thermal expansion or contraction. In contrast, mole fraction and mass percent are independent of temperature since they are based on the relative amounts of solute and solvent, which do not change with temperature.

To learn more about molality, visit: https://brainly.com/question/1370684

#SPJ1

A. The pressure of N₂O₄ in the reaction vessel would tend to fall under these conditions.

B. Yes, It is possible to reverse this tendency by adding NO₂.

a) This is because the dinitrogen tetroxide would be undergoing a reaction to form the equilibrium between N₂O₂ (g) and 2NO. The reaction would be shifting to the right, which would cause the pressure of N₂O₄ to go down.

b) This would cause the reaction to shift to the left, which would result in an increase in the pressure of N₂O₄. This is because the added NO₂ would increase the amount of reactants on the left side of the equation, which would cause the equilibrium to shift in that direction.

The increased pressure of N₂O₄ would then lead to a decrease in the amount of N₂O₄ and 2NO, thus leading to a decrease in pressure. Adding NO₂ would also result in an increase in the net amount of reactants in the system, which would also lead to an increase in pressure.

know more about equilibrium here

https://brainly.com/question/30807709#

#SPJ11

The redox reaction shown is not spontaneous in the forward direction. Since the reduction potential for the reduction of Ca2+ to Ca is more negative than that for the reduction of Zn2+ to Zn, this means that it requires an energy input (or a driving force) for the reaction to occur spontaneously in the forward direction.

In order to determine if the redox reaction occurs spontaneously in the forward direction, we need to compare the reduction potentials of the two elements involved.
In the given reaction:
Ca²⁺(aq) + Zn(s) --> Ca(s) + Zn²⁺(aq)
Ca²⁺ is being reduced to Ca, and Zn is being oxidized to Zn²⁺.
Using standard reduction potentials:
Ca²⁺ + 2e⁻ → Ca E° = -2.87 V (reduction)
Zn²⁺ + 2e⁻ → Zn E° = -0.76 V (reduction)
Since we want the oxidation potential of Zn, we reverse its equation and change the sign:
Zn → Zn²⁺ + 2e⁻ E° = +0.76 V (oxidation)
Now we can calculate the overall cell potential (E°cell):
E°cell = E°(reduction) + E°(oxidation) = -2.87 V + 0.76 V = -2.11 V
Since the E°cell is negative, the redox reaction does not occur spontaneously in the forward direction.

The redox reaction shown is not spontaneous in the forward direction. This can be determined by looking at the reduction potentials of the half-reactions involved. The reduction potential of the half-reaction for the reduction of Zn2+ to Zn is -0.76 V, while the reduction potential of the half-reaction for the reduction of Ca2+ to Ca is -2.87 V. Since the reduction potential for the reduction of Ca2+ to Ca is more negative than that for the reduction of Zn2+ to Zn, this means that it requires an energy input (or a driving force) for the reaction to occur spontaneously in the forward direction. Therefore, a source of energy would need to be provided in order for this reaction to occur spontaneously.

Learn more about redox reactions here: brainly.com/question/13293425

#SPJ11

The change in entropy of 1.00 m³ of water at 0°C when it is frozen to ice at 0°C is approximately 1220.4 J/K.

To calculate the change in entropy when 1.00 m³ of water at 0°C is frozen to ice at 0°C, you'll need to consider the heat of fusion and the constant temperature during the phase transition. The formula for change in entropy (ΔS) is:

ΔS = Q/T

where Q is the heat absorbed or released during the phase transition, and T is the constant temperature in Kelvin.

For water, the heat of fusion (Q) is approximately 333.5 kJ/kg. To find the mass of the water, we'll use the density of water at 0°C, which is roughly 1000 kg/m³. Therefore, the mass of 1.00 m³ of water is 1000 kg.

Now, we can calculate the total heat involved in the phase transition:

Q = mass × heat of fusion = 1000 kg × 333.5 kJ/kg = 333500 kJ

Next, convert the temperature from Celsius to Kelvin:

T = 0°C + 273.15 = 273.15 K

Finally, calculate the change in entropy:

ΔS = Q/T = 333500 kJ / 273.15 K ≈ 1220.4 J/K

So, freezing 1.00 m³ of water at 0°C to ice at 0°C will have a change in entropy of approximately 1220.4 J/K.

Learn more about change in entropy here: https://brainly.com/question/27549115

#SPJ11

The compound with the highest lattice energy is BaO(s). The correct option is b. BaO(s).

Lattice energy is the amount of energy released when a mole of ionic compound is formed from its gaseous ions. It is directly proportional to the charges of the ions and inversely proportional to the distance between them. Therefore, the compound with the highest lattice energy will have the highest charges on its ions and the smallest distance between them.

Among the given compounds, the one with the highest charges on its ions is BaO(s) with Ba2+ and O2- ions. It has a higher charge than the other cations (Ca2+, Na+, Li+), which lowers the distance between the ions and increases the lattice energy. Additionally, oxygen is smaller in size than sulfur or chlorine, which are present in other compounds. This leads to a smaller distance between the ions in BaO(s) and further increases the lattice energy.

Therefore, the compound with the highest lattice energy is b. BaO(s).

For more about lattice energy:

https://brainly.com/question/29735933

#SPJ11

The molar solubility of zinc hydroxide is 1.73 × 10⁻⁸ M. This means that at equilibrium, the concentration of Zn²⁺ and OH⁻ ions in a saturated solution of Zn(OH)₂ is 1.73 × 10⁻⁸ M.

The solubility product constant (K_sp) for zinc hydroxide, Zn(OH)₂, can be expressed as:

K_sp = [Zn²⁺][OH⁻]²

At equilibrium, the concentration of Zn²⁺ and OH⁻ ions can be expressed as "s", so the K_sp expression becomes:

K_sp = s²(4s) = 4s³

Substituting the given K_sp value of 3.00 × 10⁻¹⁷ M³

into this equation gives:

3.00 × 10⁻¹⁷ = 4s³

Solving for "s" gives:

s = 1.73 × 10⁻⁸ M.

learn more about Molar solubility here:

https://brainly.com/question/28170449

#SPJ11

Ka(HF) = 6.8x10⁻⁴ > Kb(NH3) = 1.76x10⁻⁵, the acidic strength of NH₄⁺ will be more dominant, and NH4F will form an acidic solution. NH₄+ (ammonium ion) is a weak acid that can donate a proton (H+) to a water molecule to form the hydronium ion (H3O+)

LiNO2 will form a pH-neutral solution because it is a salt of a strong base (LiOH) and a weak acid (HNO2). KI will form a pH-neutral solution because it is a salt of a strong acid (HI) and a strong base (KOH). NH4F will form an acidic solution because it is a salt of a weak base (NH3) and a strong acid (HF). Kb (NH3) = 1.76x10-5, which means NH3 is a weak base and will not completely dissociate in water, leaving some NH3 molecules to react with water to form NH4+ and OH- ions, making the solution acidic.

Learn more about acidic strength of NH₄ here:

https://brainly.com/question/31492127

#SPJ11

Based on the synthetic  transformation provided, we can predict the final product by following the given steps. The first step involves the conversion of culi to CH3MgBr, and the second step involves the reaction of CH3MgBr with H2O.

Without knowing the specific reaction conditions, it's difficult to predict the exact final product. However, it's possible that the final product may be a ketone or an alcohol. Predicting the final product for the following synthetic transformation using the given reagents:

1. CuLi
2. CH3MgBr (methylmagnesium bromide)
3. H2O (water)

The final product would be ethane (C2H6).

Here's a brief explanation:

First, the CuLi (copper(I) lithium) reagent acts as a catalyst to facilitate the transmetalation reaction between itself and the CH3MgBr (methylmagnesium bromide), which is a Grignard reagent. This results in the formation of a new organocopper species, CH3Cu.

Next, the CH3Cu species undergoes a nucleophilic addition reaction with another CH3MgBr molecule, which leads to the formation of an intermediate organomagnesium species with two methyl groups attached.

Finally, the addition of H2O (water) results in the protonation of the organomagnesium species, forming the final product, ethane (C2H6).

Learn more about synthetic transformation here:

https://brainly.com/question/14408986

#SPJ11

When 3-hexyne reacts with lithium in liquid ammonia, the product obtained is trans-3-hexene.

Here's a step-by-step explanation:
1. 3-hexyne, which is an alkyne with a triple bond between carbons 3 and 4, reacts with lithium (a strong reducing agent) in liquid ammonia as the solvent.
2. This reaction is known as a dissolving metal reduction, specifically, the Birch reduction. The lithium donates electrons to the alkyne, reducing the triple bond.
3. The result is a partial reduction of the alkyne to an alkene, with the new double bond having the trans configuration (i.e., the hydrogen atoms added to the carbons are on opposite sides of the double bond).
4. Therefore, the product obtained is trans-3-hexene.

learn more about lithium Refer:  https://brainly.com/question/1439744

#SPJ11

The net ionic equation for the reaction involving reactants HPO₄²⁻, NH₄⁺, MoO₄²⁻, and H⁺, with products (NH₄)₃PO₄ x 12 MoO₃ and H₂O is 2 HPO₄²⁻ + 12 MoO₄²⁻ + 12 H⁺ → PO₄³⁻ + 12 MoO₃ + 6 H₂O

To write the net ionic equation for the reaction involving reactants HPO₄²⁻, NH₄⁺, MoO₄²⁻, and H⁺, with products (NH₄)₃PO₄ x 12 MoO₃, we must write the balanced molecular equation:
2 HPO₄²⁻ + 6 NH₄⁺ + 12 MoO₄² + 12 H⁺ → (NH₄)₃PO₄ + 12 MoO₃ + 6 H₂O

Write the total ionic equation by showing all ions:

2 HPO₄²⁻ + 6 NH⁴⁺ + 12 MoO₄²⁻ + 12 H⁺ → 3 NH₄⁺ + PO₄³⁻ + 12 MoO₃ + 6 H₂O

Cancel out the spectator ions that appear on both sides of the equation (in this case, only NH₄⁺):

2 HPO₄²⁻ + 12 MoO₄²⁻ + 12 H⁺ → PO₄³⁻ + 12 MoO₃ + 6 H₂O

Thus, the net ionic equation is

(NH₄)₃PO₄ x 12 MoO₃ and H₂O is 2 HPO₄²⁻ + 12 MoO₄²⁻ + 12 H⁺ → PO₄³⁻ + 12 MoO₃ + 6 H₂O

Learn more about net ionic: https://brainly.com/question/13023035

#SPJ11

The solubility of CH3CH2COOH is due to its ability to form hydrogen bonds with water, while the solubility of CH3CH2COONa is due to its ionic nature.

Solubility is the ability of a substance to dissolve in a solvent. CH3CH2COOH, also known as acetic acid, is a weak organic acid with a carboxylic group. It is soluble in water due to its ability to form hydrogen bonds with water molecules. CH3CH2COONa, also known as sodium acetate, is the sodium salt of acetic acid. It is highly soluble in water due to its ionic nature, as it dissociates into sodium ions and acetate ions.

To know more about hydrogen bonds click here:

https://brainly.com/question/10904296

#SPJ11

Solubility is defined as the ability of a substance to dissolve in a particular solvent. CH₃CH₂COOH is the molecular formula for acetic acid, which is a weak organic acid.

It is soluble in water and other polar solvents due to its ability to form hydrogen bonds with water molecules. The solubility of acetic acid in water is 8.9% at room temperature.

CH₃CH₂COONa is the molecular formula for sodium acetate, which is the sodium salt of acetic acid. It is highly soluble in water due to its ionic nature, as it dissociates into sodium ions (Na⁺) and acetate ions (CH₃COO⁻) in water. The solubility of sodium acetate in water is 57.5% at room temperature.

It is worth noting that the solubility of both substances may vary depending on the temperature, pressure, and other factors, and can be affected by the presence of other solutes in the solvent.

Know more about Solubility here: https://brainly.com/question/31493083

#SPJ4

The correct option is b) Four.

An aldohexose is a six-carbon sugar containing an aldehyde group (-CHO) and multiple hydroxyl (-OH) groups. The open-chain form of aldohexose is a linear chain containing six carbon atoms, each of which can be a chiral center.

To determine the number of chiral carbons, we can use the formula 2^n, where n is the number of chiral centers. In this case, since there are six carbon atoms that can be chiral centers, the number of possible stereoisomers is 2^6 = 64.

However, not all six carbons are chiral centers. The first carbon (the one with the aldehyde group) is not chiral because it is only attached to three different groups (an -OH group, an -H atom, and the rest of the carbon chain). The last carbon is also not chiral because it is only attached to two different groups (-OH group and the rest of the carbon chain).

Therefore, the number of chiral carbons in the open-chain form of an aldohexose is 6 - 2 = 4.

So, the correct answer is (b) four.

Click the below link, to learn more about Chiral Carbons:

https://brainly.com/question/31212175

#SPJ11

a) Halogen atoms are electron-withdrawing groups due to their high electronegativity. As a result, they deactivate the aromatic ring towards electrophilic substitution reactions. b) Fluorine is the most deactivating halogen due to its high electronegativity and small size.

This creates a positive charge on the carbon atom that is directly attached to the halogen. This positive charge is then stabilized through resonance delocalization.

During electrophilic substitution reactions, an electrophile attacks the aromatic ring and forms a sigma complex. The sigma complex is then stabilized through resonance delocalization, which involves the positive charge being distributed throughout the ring. However, when a halogen atom is present, the positive charge is not distributed as effectively due to the electron-withdrawing effect of the halogen. This leads to a less stable intermediate and slower reaction rates.

Fluorine is the most deactivating halogen due to its high electronegativity and small size. It withdraws electrons more strongly from the ring than any other halogen and is thus the most deactivating. Chlorine, bromine, and iodine are less deactivating due to their lower electronegativity and larger size.

Know more about electronegativity here:

https://brainly.com/question/17762711

#SPJ11