Some tomato ketchup accidentally got onto a piece of white fabric. Your mother suggested that lemon juice, baking soda, or vinegar would be good for removing the tomato stain. Plan and design an experiment that can be used to investigate which of the three substances is most effective in removing the tomato stain.

1. Write a hypothesis for your investigation
2. Identify the dependent, independent, and controlled variables.
3. Outline a proposed method for the experiment you would conduct.
4. What data would be collected? Suggest a suitable way(s) for recording your data.
5. Identify ONE (1) possible source of error and ONE (1) precaution.

Please if you see this help me answer these questions.

Answer:

1.3 is the value with the lowest sig figs in your question. So we have 2 sig figs.

4568/1.3 = 3513.84615

Now let's change the answer in sig figs.

We know that trailing zeros don't actually count as part of sig figs.

So we can round the answer to 3500, having the 2 sig figs (3 and 5) while the trailing zeros don't count.

Final answer = 3500

Answer: Ammonia, an alkaline chemical, is used to raise the pH level (it's levels of acidity) of our hair during the colouring process. This then lifts the cuticles of the hair fibre and allows the colour to be deposited onto the cortex (the inner part of the hair protected by the cuticles). In hair coloring products, ammonium hydroxide is used to support the lightening action of hydrogen peroxide and to prepare hair to accept color pigments. Alkaline properties of ammonia raise the cuticle and allow peroxide and dye molecules to penetrate the hair shaft. (creds to the internet)

Explanation: Hope this helps! :D

Answer:

Explanation:

franchement moi je te dis tu peut le faire tout seul aller bon travaille

The mass of water is equal to 2.48 × 10⁷ g, needs the energy of 7.14 ×10¹⁰ J to heat and boil.

The specific heat capacity can be demonstrated as the quantity of energy needed to increase the temperature by one-degree Celcius in one unit of substance.

The temperature will be changed whenever there is a loss or absorption of energy by any substance.

Q = mCΔT

Therefore, there is a direct relationship between the mass of water and the amount of energy.

m ∝ q

[tex]{\displaystyle {\frac{m_1}{m_2} =\frac{q_1}{q_2}[/tex]

[tex]{\displaystyle {m_2} =\frac{q_2}{q_1} \times m_1[/tex]

Given, the energy required to heat mass(m₂) of water, q₂ = 7.14 ×10¹⁰ J

The energy to heat 1 gram of water, q₁ = 2870 J

[tex]{\displaystyle {m_2} =\frac{7.14\times 10^{14}}{2870} \times 1[/tex]

m₂ = 2.48 × 10⁷ g

Therefore, the mass of water is equal to  2.48 × 10⁷ g.

Learn more about specific heat capacity, here:

brainly.com/question/28302909

#SPJ2

Answer:

46.....................

Explanation:

and then name of the other product will be sodium sulphate

Answer:

1.35 g

Explanation:

water is h2o, so the molar mass is 1.01x2+16.00=18.02. divide 4.5 x 10^22 by 6.022 x 10^23 to get 7.5 x 10^-2 (2 sig figs). 18.02 x 7.5 x 10^-2 is 1.35 g

Answer:

About 0.53 g of carbon dioxide needs to be added.

Explanation:

Recall the ideal gas law:

[tex]\displaystyle PV = n RT[/tex]

To determine the amount of carbon dioxide we need, we need to solve for n:

[tex]\displaystyle n = \frac{PV}{RT}[/tex]

Recall that P, V, and T are in atm, L, and K, respectively. R is the universal gas constant.

Convert all values into the correct units:

Volume:

[tex]\displaystyle 250\text{ mL } \cdot \frac{1 \text{ L}}{1000 \text{ mL}} = 0.25 \text{ L}[/tex]

Temperature:

[tex]\displaystyle \begin{aligned} K & =( ^\circ C) + 273.15 \\ \\ & = (-24) + (273.15) \\ \\ & = 249 \text{ K}\end{aligned}[/tex]

And pressure:

[tex]\displaystyle 95 \text{ kPa} \cdot \frac{1.00 \text{ atm}}{101.3 \text{ kPa}} = 0.94 \text{ atm}[/tex]

Substitute and evaluate:

[tex]\displaystyle\begin{aligned} n & = \frac{\left(0.94 \text{ atm}\right)\left(0.25 \text{ L}\right)}{\left(\dfrac{0.08206 \text{ L-atm}}{\text{mol-K}}\right)\left(249\text{ K}\right)} \\ \\ & = 0.012 \text{ mol CO$_2$}\end{aligned}[/tex]

Convert moles to grams:

[tex]\displaystyle 0.012 \text{ mol CO$_2$} \cdot \frac{44.01 \text{ g CO$_2$}}{1 \text{ mol CO$_2$}} = 0.53 \text{ g CO$_2$}[/tex]

In conclusion, about 0.53 g of carbon dioxide needs to be added.

The process of grinding is a physical change that takes place in the mouth during digestion.

Grinding is one of the processes that occur during the digestion of food molecules into simpler substances.

Grinding of food molecules occurs in the mouth with the aid of the teeth, which is used to chew.

However, the process of grinding is a physical change because it does not result into the formation of new substances or change the chemical constituents of the food.

Learn more about physical change at: https://brainly.com/question/1984022?referrer=searchResults

Answer:

A

Explanation:

is the best answer...........

Answer:

Knetic

Explanation:

When you jump on a trampoline, your body has kinetic energy that changes over time. As you jump up and down, your kinetic energy increases and decreases with your velocity. Your kinetic energy is greatest, just before you hit the trampoline on the way down and when you leave the trampoline surface on the way up.

Answer:

Explanation:

An acidic solution has a high concentration of hydrogen ions (H +start superscript, plus, end superscript), greater than that of pure wate

Answer:

numbers of molecules = 3×6.023×10-23

Answer:

D

Explanation:

Given that the molar mass of NaCl is 58.44 g/mol, we want to determine the molarity of a solution that contains 87.75 g of NaCl in 500. mL of solution.

Recall that molarity is given by:

[tex]\displaystyle \text{M} = \frac{\text{ mols solute}}{\text{ liters soln.}}[/tex]

Therefore, we can convert the amount of NaCl in the solution to moles of NaCl and the volume from milliliters to liters:

[tex]\displaystyle \begin{aligned} \text{M} & = \frac{(87.75 \text{ g NaCl})}{(500. \text{ mL soln.})} \cdot \frac{1 \text{ mol NaCl}}{58.44 \text{ g NaCl}} \cdot \frac{1000 \text{ mL soln.}}{1 \text{ L soln.}} \\ \\ & = 3.00\text{ } \frac{\text{mol NaCl}}{\text{ L soln.}} \\ \\ & = 3.00 \text{ M} \end{aligned}[/tex]

Hence, our answer is D.

Answer:

13.8 moles

Explanation:

You know that in a mole you have 6.022x10²³ something in this case of molecules. By knowing that by each mole you have 6.022x10²³ molecules, then you can establish the factor of conversion:

8.32x10²⁴molec of CO2 x 1 mol/6.022x10²³ molec of CO2

You divide 8.32x10²⁴/6.022x10²³ and you get 13.81 moles.

Answer:28.01 grams

Explanation:

Answer:

706 L

Explanation:

P1V1 = P2 V2 3 atm 250.0 mL = 1 atm X

T1 T2 290 K 273 K

706 mL = X

Answer:

cryogenic distillation process

Explanation:

Cryogenic distinction between carbohydrates and harmon process.

The density of the gas is obtained as  0.55 g/L.

We can find the density of the gas using the relation;

PM = dRT

P = pressure of the gas

M = molar mass of the gas

d = density of the gas

R = gas constant

T = temperature

Now;

P = 29.9 kPa

R = 8.314 L·kPa mol·K.

T =  147°C + 273 = 420 K

d = ?

M = 64 g/mol

Substituting values;

d = PM/RT

d =  29.9 kPa ×  64 g/mol/ 8.314 L·kPa mol-1K-1 420 K

d = 1913.6/3491.88

d = 0.55 g/L

Learn more about density: https://brainly.com/question/952755

Answer:

HF + LiOH = LiF + H2O.

Explanation:

Hydofluoric acid is a weak acid the solution would be slightly basic due to the following equilibrium (condition in the course of a reversible chemical reaction in which no net change in the amounts of reactants and products occurs.)

Hope that helps. x

We are given –

Here–

[tex]\qquad[/tex][tex] \pink{\bf \longrightarrow Initial\: velocity = 100 \:km/hr}[/tex]

[tex]\qquad[/tex][tex] \sf \longrightarrow Initial\: velocity = \dfrac{ 100 \times 1000}{3600} \:m/s[/tex]

[tex]\qquad[/tex][tex]\pink{ \bf \longrightarrow Initial\: velocity = 27.78\: m/s} [/tex]

Now –

[tex]\qquad[/tex]____________________________

[tex]\qquad[/tex][tex] \purple{\bf \longrightarrow Acceleration = \dfrac{Final\: Velocity -Initial \:Velocity }{Time}}[/tex]

[tex]\qquad[/tex][tex] \purple{\bf \longrightarrow Acceleration = \dfrac{v -u}{t}}[/tex]

[tex]\qquad[/tex][tex] \sf \longrightarrow Acceleration = \dfrac{(0- 27.78)}{1800}[/tex]

[tex]\qquad[/tex][tex] \sf \longrightarrow Acceleration =\cancel{ \dfrac{- 27.78}{1800}}[/tex]

[tex]\qquad[/tex][tex] \purple{\bf \longrightarrow Acceleration = -0.015 \: m/s^2} [/tex]

[tex]\qquad[/tex]_______________________________

Answer:

160.3g

Explanation:

We know the equation:

No of moles = mass ÷ Mass of element

We need to find the mass, so make mass the subject of the formula.

Mass = No. of moles × mass of element

Mass = 5 × 32.06

Mass = 160.3g

Explanation:

download the app topper

[tex]\rule{2000pt}{1000000pt}[/tex]

mamama

Answer:

C. Aluminum

Explanation:

Aluminum has 5.9858 ionization energy

Boron has 8.298 ionization energy

Silicon has 8.1517 ionization energy

Carbon has 11.2603 ionization energy

Answer:

As a substance changes from a solid to a liquid to a gas, its molecules first the molecules are moving fast enough, they are able to "escape." They leave the surface of the liquid as gas molecules. Evaporation is not the only process that can change a substance from a liquid to a gas. The same change can occur through boiling.

Explanation:

hopfully this helps!

Answer:

Fluorine is identified as the most reactive nonmetal and the most electro-negative element in the periodic table, making it the strongest oxidizing agent. Caesium is the most reactive metal in the periodic table, so much that working with this metal often ends in explosions!

Hydrogen is a very reactive gas, and the alkali metals are even more reactive. In fact, they are the most reactive metals and, along with the elements in group 17, are the most reactive of all elements.

Hope that helps.

Answer:

Because noble gases have a full octet, their ionization energies are actually quite high. Electron affinity is the amount of energy released when an electron is added to a neutral atom. Because noble gases have stable electron configurations, they have very low electron affinities.

Explanation:

Answer:

Noble gases have a stable outer shell

Explanation:

Answer:

because it does not cost much and can be found easily.  due to their low resistance and excellent conductivity.

Explanation:

Answer:

Neutralization occurs when a strong acid and a strong base come together in a chemical reaction to form water and salt.

Explanation:

not sure huhuhu