True. Standard temperature and pressure (STP) is a standard set of conditions used for comparing properties of different gases.
How is the above statement true?A set of standardized settings known as standard temperature and pressure (STP) is used to compare the characteristics of various gases. The standard pressure is approximately atmospheric pressure at sea level, which is equal to 101.325 kPa or 1 atmosphere, while the standard temperature is 0°C or 273.15 K. (atm). When comparing the physical characteristics of various gases, such as molar volume, density, and compressibility, STP is frequently used in physics and chemistry to determine how gases behave under normal conditions. It is crucial to remember that STP is not a set of rigid requirements, and various companies may specify STP using slightly varying numbers for temperature and pressure.
Learn more about molar volume here:
brainly.com/question/29884686
#SPJ1
How many grams of iron are produced when 450 grams of iron (lll) oxide are reacted
To answer this question, we need to know the balanced chemical equation for the reaction between iron (III) oxide and another substance that would produce iron.
How many grams of iron will be produced when 450 grams of iron (lll) oxide are reacted?Assuming the reaction is:
Fe₂O₃ + 3CO → 2Fe + 3CO₂
This equation tells us that one mole of Fe₂O₃ reacts with three moles of CO to produce two moles of Fe. We can use this information to calculate the number of moles of Fe that can be produced from 450 grams of Fe₂O₃.
Convert the mass of Fe₂O₃ to moles in the first step:
Molar mass of Fe₂O₃ = 2 x atomic mass of Fe + 3 x atomic mass of O = 2 x 55.85 + 3 x 16.00 = 159.69 g/mol
Number of moles of Fe₂O₃ = 450 g / 159.69 g/mol = 2.82 mol
According to the balanced chemical equation, 1 mole of Fe₂O₃ produces 2 moles of Fe. Therefore, the number of moles of Fe that can be produced from 2.82 mol of Fe₂O₃ is:
Number of moles of Fe = 2.82 mol x (2 mol Fe / 1 mol Fe₂O₃) = 5.64 mol
Convert the number of moles of Fe to grams in the final step:
Molar mass of Fe = 55.85 g/mol
Mass of Fe produced = 5.64 mol x 55.85 g/mol = 315.89 g
Therefore, if 450 grams of iron (lll) oxide are reacted with carbon monoxide to produce iron, the amount of iron produced would be 315.89 grams.
Learn more about iron (lll) oxide here:
https://brainly.com/question/14401892
#SPJ1
HELPPPPPPP ASPA!!!!60 POINTS TO ANSWER
1) Nuclear energy is sometimes classified as a renewable source.
However, it also has aspects that classify it as non-renewable. Describe
how nuclear energy is both renewable and non-renewable.
2) Imagine that you are part of a team deciding which energy resource, coal or wind, should
power your community’s electrical grid. Write two pros and two cons on the chart for each resource below. its coal and wind i need 2 pros and 2 cons for both.
Answer:
1) Nuclear energy is a non-renewable resource because it relies on uranium to generate power. Uranium is a radioactive element not found in large quantities on Earth. Once it is used to fuel a nuclear reactor, it cannot be reused. This means that once all the uranium is gone, we will no longer be able to generate nuclear power.
2)
Wind power pros and cons
ProsWind power is a clean and renewable energy sourceWind power is cost-effective2. Cons
Construction can cause local disturbances Can negatively impact local wildlife if not carefully designedCoal power pros and cons
1. Pros
Inexpensive Energy SourceIndependent of the Weather2. Cons
It is not a renewable resourceCoal contains a high level of carbon dioxideIf 7.50 g of ammonia hydroxide react, how many moles of ammonia will be produced?
The balanced chemical equation for the reaction of ammonia hydroxide (NH4OH) producing ammonia (NH3) is:
NH4OH → NH3 + H2O
The equation shows that 1 mole of NH4OH produces 1 mole of NH3.
To determine the number of moles of NH3 produced from 7.50 g of NH4OH, we need to first calculate the molar mass of NH4OH:
NH4OH = 1 x 14.01 (atomic mass of N) + 4 x 1.01 (atomic mass of H) + 1 x 16.00 (atomic mass of O) = 35.05 g/mol
Next, we can use the following formula to calculate the number of moles:
moles = mass / molar mass
moles of NH4OH = 7.50 g / 35.05 g/mol = 0.214 mol
Since 1 mole of NH4OH produces 1 mole of NH3, the number of moles of NH3 produced is also 0.214 mol.
Therefore, 7.50 g of NH4OH produces 0.214 moles of NH3.
AP Environmental Science
The graph shows the change in energy production sources over time.
What do these data say about the country’s use of nuclear energy?
- Natural gas use spiked in 2003 because most nuclear power plants were decommissioned.
- The amount of hydroelectric power has remained constant in spite of nuclear power being used today.
- Most of the nuclear power used in the United States comes from plants built before 1990.
- Nuclear power was the main source of electricity before the turn of the century.
The graph's data show that throughout time, nuclear energy has lost some of its significance as a source of energy production in the US.
Since the turn of the century, the amount of nuclear energy utilised has continuously fallen while the use of natural gas, coal, and hydroelectric power has increased.
This might indicate that the nation has been moving away from using nuclear energy as its main source of electricity. This information shows that the nation is switching from nuclear energy as its main source of electricity to other sources such as coal, natural gas, and hydroelectricity.
Learn more about electricity at:
https://brainly.com/question/31668005
#SPJ1
Cl 2 and N 2 react according to the following equation
3Cl 2(g) + N 2(g) → 2NCl 3(g)
If 4 L of a stoichiometric mixture of chlorine and nitrogen are converted to nitrogen
trichloride under conditions of constant temperature and pressure what is the
volume of NCl 3(g) produced?
Does any know the answer to the first three question
1. C) Molarity is indirectly related to volume.
2. A) The CaCl2 beaker has more ions in solution.
3. the molarity of the NaCl solution is 0.0513 M.
How to find the molarityStep 1: Convert 30g of NaCl to moles.
The molar mass of NaCl is 58.44 g/mol. To convert 30 g to moles, divide by the molar mass:
30 g NaCl / 58.44 g/mol = 0.513 mol NaCl
Step 2: List Given and asking information.
Given:
Mass of NaCl = 30g
Volume of solution = 10.0L
Asking:
Molarity of the solution = ?
Step 3: set Molarity Formula and plug the mole/ Volume into the formula.
Molarity = moles of solute / volume of solution
Molarity = 0.513 mol / 10.0 L = 0.0513 M
Therefore, the molarity of the NaCl solution is 0.0513 M.
Learn more about molarity at
https://brainly.com/question/14469428
#SPJ1
Reviewing Main Ideas
1. What is meant by reaction mechanism?
2. What factors determine whether a molecular collision produces a reaction?
3. What is activation energy?
4. What is an activated complex?
5. How is activation energy related to the energy of reaction?
6. What is the difference between an activated complex and an intermediate?
7. Explain why, even though a collision may have energy in excess of the activation energy, a reac- tion may not occur. Critical Thinking
8. ANALYZING INFORMATION Which corresponds to the faster rate: a mechanism with a small activation energy or one with a large activation energy? Explain your answer.
A reaction mechanism is a detailed explanation of the steps involved in a chemical reaction. As a result of the reaction, intermediates, transition states, and products are produced.
The least amount of energy required for a reaction to take place is called activation energy. An intermediate state in a reaction where the reactants have sufficient energy to generate a reaction product is known as an activated complex
. Because the activation energy is the quantity of energy required to break down the energy barrier separating the reactants and the products, it is connected to the energy of reaction
Even though a collision has more energy than the activation energy, a reaction might not happen because the reactants need to be in the right orientation and at the right distance for a reaction product to develop.
Because it takes less energy to break through the energy barrier separating the reactants and the products, the mechanism with the lower activation energy will operate at a quicker rate.
Learn more about energy at:
https://brainly.com/question/1932868
#SPJ1
A reaction mechanism is a detailed explanation of the steps involved in a chemical reaction. As a result of the reaction, intermediates, transition states, and products are produced.
The least amount of energy required for a reaction to take place is called activation energy. An intermediate state in a reaction where the reactants have sufficient energy to generate a reaction product is known as an activated complex
. Because the activation energy is the quantity of energy required to break down the energy barrier separating the reactants and the products, it is connected to the energy of reaction
Even though a collision has more energy than the activation energy, a reaction might not happen because the reactants need to be in the right orientation and at the right distance for a reaction product to develop.
Because it takes less energy to break through the energy barrier separating the reactants and the products, the mechanism with the lower activation energy will operate at a quicker rate.
Learn more about energy at:
https://brainly.com/question/1932868
#SPJ1
In which set of apparatus A-D in the figure would the metal key be electroplated with copper?
Answer:
the answer is the option C
72g of water is broken down by electricity to form hydrogen and oxygen.
a. Write the chemical equation.
b. Find the mass of the obtained hydrogen.
c. Find the volume of the obtained hydrogen and oxygen at STP.
(H = 1, 0=16, At STP: 2g of H2 and32g of O₂2 has 22.4L)
A. The balanced equation is: 2H₂O -> 2H₂ + O₂
B. The mass of hydrogen obtained is 8 g
Ci. The volume of hydrogen produced is 89.6 L
Cii. The volume of oxygen produced is 44.8 L
A. How do i write the balanced equation?The balanced equation for the reaction is written as follow:
Water -> Hydrogen + oxygen
2H₂O -> 2H₂ + O₂
B. How do i determine the mass hydrogen obtained?first, we shall write the balanced equation for the reaction. This is given below:
2H₂O -> 2H₂ + O₂
Molar mass of H₂O = 18 g/molMass of H₂O from the balanced equation = 2 × 18 = 36 g Molar mass of H₂ = 2 g/molMass of H₂ from the balanced equation = 2 × 2 = 4 gFrom the balanced equation above,
36 g of H₂O reacted to produce 4 g of H₂
Therefore,
72 g of H₂O will react to produce = (72 × 4) / 36 = 8 g of H₂
Thus, the mass of hydrogen obtained is 8 g
Ci. How do i determine the volume of hydrogen produced?The volume of hydrogen produced can be obtained as follow:
2 g of H₂ = 22.4 L
Therefore
8 g of H₂ = (8 g × 22.4 L) / 2 g
8 g of H₂ = 89.6 L
Thus, the volume of hydrogen produced is 89.6 L
Cii. How do i determine the volume of oxygen produced?First, we shall obtain the mass of oxygen gas produced. Details below:
2H₂O -> 2H₂ + O₂
Molar mass of H₂O = 18 g/molMass of H₂O from the balanced equation = 2 × 18 = 36 g Molar mass of O₂ = 32 g/molMass of O₂ from the balanced equation = 1 × 32 = 32 gFrom the balanced equation above,
36 g of H₂O reacted to produce 32 g of O₂
Therefore,
72 g of H₂O will react to produce = (72 × 32) / 36 = 64 g of O₂
Finally, we shall determine the volume of oxygen produced. Details below:
32 g of O₂ = 22.4 L
Therefore
64 g of O₂ = (64 × 22.4) / 32 g
64 g of O₂ = 44.8 L
Thus, the volume of oxygen produced is 44.8 L
Learn more about mass produced:
https://brainly.com/question/9526265
#SPJ1
15kg of iron (lll) oxide was used in a reaction to produce iron.calculate the mass of iron produced in this reaction
10.50 kg of iron will be produced from 15 kg of iron (III) oxide.
What is mass?The amount of matter in an item is measured by its mass, which is a fundamental physical quantity. It is a scalar amount that is measured in kilograms (kg) or grams (g). Regardless of an object's location or the force pressing against it, its mass always remains constant.
How do you determine it?Iron (III) oxide and elemental iron react chemically in the following balanced chemical equation:
2 Fe2O3+ 3 C = 4 Fe + 3 CO2
Due to the reaction between 2 moles of Fe2O3 and 4 moles of Fe, the mole ratio of Fe2O3 to Fe is either 2:4 or 1:2.
The amount of iron created from 15 kg of Fe2O3 can be calculated using this mole ratio:
Fe2O3 = 2 moles of Fe per mole.
Fe2O3's molecular weight is 159.69 g/mol.
Fe2O3 has a mass of 15 kg and a density of 15,000 g/mol, or 94.00 moles.
We can figure out how many moles of Fe were produced using the mole ratio of 1:2:
We can figure out how many moles of Fe were produced using the mole ratio of 1:2:
2 moles of Fe for each mole of Fe2O3 94.00 moles of Fe2O3 multiplied by (2 moles of Fe for each mole of Fe2O3) results in 188.00 moles of Fe.
The molar mass of Fe can then be used to convert the moles of iron to mass as follows:
Fe's molecular weight is 55.85 g/mol.
188.00 moles of Fe produced at a rate of 55.85 g/mol result in a mass of 10,499.80 g or 10.50 kg.
Hence, 10.50 kg of iron will be produced from 15 kg of iron (III) oxide.
To know more about mass, visit:
brainly.com/question/19694949
#SPJ1
find k given [S0₂ 2] =1.50 M, [O₂] = 1.25 M [SO₃] = 3.50 M 2 SO₂ + 1 O₂ ← →2 SO₃
The rate constant value for the given reaction is 1.8×10⁻⁵. The chemical kinetics rate law, which connects the molecular concentration of reactants with reaction rate
The chemical kinetics rate law, which connects the molecular concentration of reactants with reaction rate, uses the rate constant as a proportionality factor. The letter k in an equation designates it, which is also referred by the term the reaction constant of rate and reaction rate coefficient.
2SO[tex]_2[/tex](g) + O[tex]_2[/tex](g) →2SO[tex]_3[/tex](g)
Keq = [SO[tex]_3[/tex]]² / ([SO[tex]_2[/tex]]² [ O[tex]_2[/tex]])
= [3.50]² / ([1.50]² [ 1.25)
= 1.8×10⁻⁵
To know more about rate constant, here:
https://brainly.com/question/20305871
#SPJ1
Would you describe the overall process of forming memory as "universal" across cultures?
Answer:
Memory formation involves similar cognitive processes, such as encoding, storage, and retrieval of information, that are common to all humans regardless of their cultural background. Also, memory formation is a fundamental cognitive function that allows individuals to acquire, retain, and recall information from past experiences or learning, and it is necessary for various cognitive tasks such as learning, problem-solving, and decision-making.
While there could be cultural influences on memory, such as language, social norms, education, and cultural practices, the basic cognitive processes of memory formation are considered to be universal. The encoding process, where information is acquired and processed into a memory representation, is similar across cultures in terms of how sensory information is transformed into neural codes. The storage process, where information is retained over time, and the retrieval process, where information is recalled and brought back into consciousness, are also considered to be universal cognitive functions.
It is important to emphasize that cultural factors can influence how memory is experienced, expressed, and used in different cultures, but the underlying cognitive processes of memory formation are believed to be similar across cultures. Research on memory has been conducted across various cultures and populations, and while there may be cultural variations in memory processes, the basic cognitive mechanisms of memory formation are considered to be universal. It is important to consider cultural context when studying or interpreting memory processes, but the fundamental cognitive processes of memory formation are generally believed to be universal across cultures.
Why would a flare be observed in visible light, when they are so much brighter in x-ray and ultraviolet light?
A. Flares can damage x-ray and ultraviolet detectors and these therefore must be turned off during these events, leaving only visible observatories that can be used.
B. The proximity of the sun allows us to be able to view solar flares in visible light because at this distance, they are still very bright.
C. The distance to the Sun is so vast that the x-ray and ultraviolet light from the flares dim before they can reach Earth leaving only the visible light.
D. In order to observe x-ray and ultraviolet light, the telescopes have to be in space.
A flare would be seen in visible light even though they are much brighter in x-ray and ultraviolet light because (D) The telescopes need to be in space in order to observe x-ray and ultraviolet light.
The reason solar flares are so brilliant?When the Sun's powerful magnetic fields get too twisted, flares happen. The tangled magnetic fields snap when they are overtwisted, much like a rubber band that snaps when overtwisted.
What triggers the flares and explosions that we observe on the sun's surface?A quick explosion of energy known as a solar flare is brought on by the tangling, crossing, or reorganisation of magnetic field lines close to sunspots. It contains electrically charged gases that produce strong magnetic fields in some regions.
To learn more about solar flares visit:
brainly.com/question/22331462
#SPJ1
A valid Lewis structure of _____ cannot be drawn without violating the octet rule.
a)
NF3
b)
IF3
c)
PF3
d)
SbF3
A valid Lewis structure of IF[tex]_3[/tex] cannot be drawn without violating the octet rule. Therefore, the correct option is option B.
Lewis structures, often referred to as Lewis dot calculations, Lewis dot constructions, electron dot frameworks, especially Lewis electron dot configurations (LEDS), represent diagrams that depict the interactions of atoms inside molecules as well as any single pairs of electrons which may be present. A valid Lewis structure of IF[tex]_3[/tex] cannot be drawn without violating the octet rule.
Therefore, the correct option is option B.
To know more about Lewis structure, here:
https://brainly.com/question/20300458
#SPJ1
The aldol condensation can also be catalysed by acid. Write the mechanism for the acid- catalysed condensation of acetophenone with benzaldehyde.
The mechanism is: Step 1: Protonation of carbonyl group, Step : Formation of enol intermediate, Step 3: Nucleophilic attack by benzaldehyde, Step 4: Proton transfer, Step 5: Rearrangement,
The overall reaction can be represented as: Acetophenone + Benzaldehyde → Aldol intermediate → α,β-unsaturated ketone + H₂O. The acid catalyst (such as HCl or H₂SO₄) protonates the carbonyl group of the acetophenone, making it more susceptible to nucleophilic attack by the benzaldehyde, then protonated acetophenone then loses a water molecule to form an enol intermediate. The enol intermediate acts as a nucleophile and attacks the carbonyl group of the benzaldehyde, forming a new carbon-carbon bond.
Learn more about the chemical reactions here.
https://brainly.com/question/31490834
#SPJ1
In the laboratory a "coffee cup" calorimeter , or constant pressure calorimeter, is frequently used to determine the specific heat of a solid, or to measure the energy of a solution phase reaction.
Since the cup itself can absorb energy, a separate experiment is needed to determine the heat capacity of the calorimeter. This is known as calibrating the calorimeter and the value determined is called the calorimeter constant.
One way to do this is to use a common metal of known heat capacity. In the laboratory a student heats 90.80 grams of nickel to 98.73 °C and then drops it into a cup containing 84.70 grams of water at 24.03 °C. She measures the final temperature to be 31.63 °C.
Using the accepted value for the specific heat of nickel (See the References tool), calculate the calorimeter constant.
The specific heat capacity of nickel is given as 0.444 J/g·°C and the calorimeter constant is calculated to be 14.86 J/°C.
To calculate the calorimeter constant, we need to use the heat gained by the water and the heat lost by the nickel. The heat gained by the water can be calculated using the equation:
q₁ = m₁ × C₁ × ΔT
where m₁ is the mass of water, C₁ is the specific heat capacity of water (4.184 J/g·°C), and ΔT is the change in temperature of the water (final temperature - initial temperature).
q₁ = 84.70 g × 4.184 J/g·°C × (31.63 °C - 24.03 °C)
q₁ = 2,550 J
The heat lost by the nickel can be calculated using the equation:
q₂ = m₂ × C₂ × ΔT
where m₂ is the mass of nickel (90.80 g), C₂ is the specific heat capacity of nickel (0.444 J/g·°C)
q₂ = 90.80 g × 0.444 J/g·°C × (98.73 °C - 31.63 °C)
q₂ = 2,654 J
Since the heat lost by the nickel is equal to the heat gained by the water, we can write:
q₂ = q₁ + q₃
where q₃ is the heat absorbed by the calorimeter. Solving for q₃, we get:
q₃ = q₂ - q₁
q₃ = 2,654 J - 2,550 J
q₃ = 104 J
The calorimeter constant can now be calculated using the equation:
C₃ = q₃ ÷ ΔT
C₃ = 104 J ÷ (31.63 °C - 24.03 °C)
C₃ = 14.86 J/°C
To learn more about calorimeter follow the link:
https://brainly.com/question/14857582
#SPJ1
What are the bond angles?
Answer:
109.5º
Explanation:
The leftmost carbon has four bonds and no lone pairs attached to it. According to the VSEPR model, this carbon has a tetrahedral geometry. Thus, each bond angle is 109.5º
independent variable in the reaction of stoichiometry and percentage yield
In a chemical reaction, the stoichiometry refers to the quantitative relationship between the reactants and products, as expressed in a balanced chemical equation.
The stoichiometry of a reaction determines the theoretical yield, which is the maximum amount of product that can be obtained from a given amount of reactants.
The percentage yield, on the other hand, is a measure of the actual yield of a reaction compared to the theoretical yield. It is calculated by dividing the actual yield by the theoretical yield and multiplying by 100%.
In this context, the independent variable would be the amount of reactants used in the reaction, since this is what is being varied or controlled in the experiment.
The stoichiometry and percentage yield would be dependent variables, as they depend on the amount of reactants used and the efficiency of the reaction.
To know more about stoichiometry, visit: brainly.com/question/30215297
Determine the pH of a 3.4x10^-6 M solution of HNO3
Answer: pH of the solution is 5.47
Explanation: Since HNO3 is a strong acid the concentration of H+ is the same as NO3- only because they are in 1-to-1 ratio. Both ions will have 3.4 x 10^-6 M.
The formula of pH is: pH = -log( the equilibrium concentration of H+ )
When you plug in the concentration of H+:
pH = -log (3.4 x 10^.6 M)
pH = 5.47
Remember: Only the digits after the decimal point are significant figures in logarithms.
For example: 5.47 only has 2 significant figures.
The acid-dissociation constant for benzoic acid (C6H5COOH) is 6.3×10−5.
Equilibrium concentration of C₆H₅COO⁻ in the solution is calculated as 2.008 × 10⁻⁴ M.
What is meant by acid-dissociation constant?Measure of the strength of acid in any solution is called acid-dissociation constant.
The dissociation reaction of benzoic acid (C₆H₅COOH) in water can be represented as follows: C₆H₅COOH + H₂O ⇌ C₆H₅COO⁻ + H₃O⁺
Ka = [C₆H₅CO⁻][H₃O⁺] / [C₆H₅COOH]
Ka = [C₆H₅COO⁻][H₃O⁺] / [C₆H₅COOH]
6.3 × 10⁻⁵ = [C₆H₅COO⁻[H₃O⁺] / 0.0064
[C₆H₅COO-][H₃O⁺] = 6.3 × 10⁻⁵ × 0.0064
[C₆H₅COO⁻][H3O⁺] = 4.032 × 10⁻⁷
[C₆H₅COO⁻] = x
[H₃O⁺] = x
x² = 4.032 × 10⁻⁷
x = √(4.032 × 10⁻⁷)
x = 2.008 × 10⁻⁴
Therefore, the equilibrium concentration of C₆H₅COO⁻ in the solution is 2.008 × 10⁻⁴ M.
To know more about acid-dissociation constant, refer
https://brainly.com/question/22668939
#SPJ1
In the laboratory a "coffee cup" calorimeter, or constant pressure calorimeter, is frequently used to determine the specific heat of a solid, or to measure the energy of a solution phase reaction.
A student heats 67.38 grams of chromium to 97.97 °C and then drops it into a cup containing 85.09 grams of water at 21.20 °C. She measures the final temperature to be 27.35 °C.
The heat capacity of the calorimeter (sometimes referred to as the calorimeter constant) was determined in a separate experiment to be 1.74 J/°C.
Assuming that no heat is lost to the surroundings calculate the specific heat of chromium.
The specific heat of chromium is 0.436 J/g·°C, assuming no heat is lost to the surroundings.
Using the principle of conservation of energy, we can determine the heat gained by the water, which is equal to the heat lost by the chromium.
The heat gained by the water can be calculated using the formula:
q₁ = m₁ × C₁ × ΔT
where q₁ is the heat gained by the water, m₁ is the mass of water, C₁ is the specific heat of water, and ΔT is the change in temperature of the water.
Substituting the given values, we get:
q₁ = (85.09 g) × (4.184 J/g·°C) × (27.35 °C - 21.20 °C)
q₁ = 1,454.67 J
The heat lost by the chromium can be written as:
q₂ = -q₁ = -1,454.67 J
The heat lost by the chromium can also be expressed as:
q₂ = m₂ × C₂ × ΔT
where m₂ is the mass of chromium, C₂ is the specific heat of chromium, and ΔT is the change in temperature of the chromium.
Substituting the given values and solving for C₂, we get:
C₂ = -q₂ ÷ (m₂ × ΔT)
C₂ = -1,454.67 J ÷ (67.38 g × (97.97 °C - 27.35 °C))
C₂ = 0.436 J/g·°C
To learn more about heat follow the link:
https://brainly.com/question/11297584
#SPJ1
PLS HELP!!!!!
Convert the following measurements. Show all work, including units that cancel.
18.2 g -> ? mol
Answer: To convert grams (g) to moles (mol), we need to use the molar mass of the substance. We can use the following formula:
moles = mass (in grams) / molar mass
We will assume that we are given the mass of a pure substance. If the substance is a compound, we will need to look up the molar mass in the periodic table or calculate it using the atomic masses of its elements.
Let's assume that we are given 18.2 g of a pure substance and we want to convert it to moles. We will need to look up the molar mass of the substance. For example, let's say the substance is water (H2O):
Molar mass of H2O = 2(1.008 g/mol) + 1(15.999 g/mol) = 18.015 g/mol
Now we can use the formula to convert grams to moles:
moles = 18.2 g / 18.015 g/mol = 1.009 mol
Therefore, 18.2 g of the substance is equivalent to 1.009 mol of the substance.
A 11.27-g block of solid gold at 68.23 °C is immersed in a 23.16-g pool of liquid ethanol with a temperature of 10.76 °C. When thermal equilibrium is reached, what is the temperature of the gold and ethanol?
Specific heat capacities: gold = 0.129 J/g °C; ethanol = 2.44 J/g °C
Answer:
Final Temperature = 12.20 Celsius
Explanation:
Use the equation:
ΔC*q*m = -ΔC*q*m
[tex]11.27*0.129*(T_{f}-68.23) = -23.16*2.44*(T_{f}-10.76)\\1.45T_{f} -99.19 = -56.51T_{f} +608.15\\T_{f} = 12.20 C[/tex]
Look at the situations below and determine which ones are examples of weathering. Select ALL that apply.
Wind blows rocks, sand, and dirt away
A river carries rocks and sand downstream,
Plant roots break rocks apart
Rain wears rocks down
Wind wears rocks down
Water dissolves limestone
Rainwater washes dirt and rock downhill
Weathering processes, both physical and chemical, break down rocks into smaller particles that mix with organic matter to form soil. Physical weathering, such as freeze-thaw cycles, root growth, and abrasion, mechanically break rocks into smaller fragments.
Chemical weathering, such as oxidation, dissolution, and hydrolysis, alters the mineral composition of rocks and releases nutrients for plant growth. The products of weathering, such as clay minerals and soluble salts, affect soil properties like texture, structure, porosity, and nutrient availability. Weathering also affects the pH of soil, which influences the solubility and availability of nutrients. Overall, weathering plays a critical role in soil formation and the availability of nutrients for plant growth.
To know more about Weathering processes, here
brainly.com/question/9621344
#SPJ1
--The complete Question is, How does the process of weathering, such as the physical and chemical breakdown of rocks, affect the composition and properties of soil?--
When the end product of protein hydrolysis enter the cytoplasm of a cell , they may become building blocks for the synthesis of
A) glycogen
B) starches
C) enzymes
D) lipids
Answer: C) enzymes
When the end product of protein hydrolysis enter the cytoplasm of a cell, they may become building blocks for the synthesis of enzymes
Please show all the work
1- How many grams are in 12.3 moles of Dinitrogen Pentoxide?
2-How many grams are in 2.7 moles of Iron (III) Nitrate? (Fe(NO3)3)
3- How many grams are in 0.16 moles of Sucrose? (C12H22011)
4- How many grams are in 0.87 moles of Potassium Iodide? (KI)
We haver the mass from the moles of each of the compounds below.
Number of moles1) Mass/Molar mass = number of moles
=Mass = Molar Mass * Molar Number
= 12.3 moles x g/mol 108
= 1328.4 g
2) Mass/Molar mass = number of moles
=Mass = Molar Mass * Molar Number
2.7 moles times 242 g/mol
= 653 g
3)) Molar mass divided by the number of moles
=Mass = Molar Mass * Molar Number
= 3.42 g/mol * 0.16 moles
= 54.72 g
4) Moles = mass / molecular mass
=Mass = Molar Mass * Molar Number
= 166 g/mol * 0.87 moles
= 144 g
Learn more about moles:brainly.com/question/15209553
#SPJ1
5g of Zinc is reacted with excess hydrochloric acid. The equation for the reaction is:
Zn + HCI -> ZnCl2 + H₂
a. Balance this chemical equation then write down Ar, Mr and Given mass.
b. Calculate the mass of zinc chloride formed
c. Calculate the volume of hydrogen gas produced
Given: Zn = 65, H = 1, C1 = 35.5, 2g of H2 has 22.4L
A. The balanced equation is: Zn + 2HCI -> ZnCl₂ + H₂
B. The mass of zinc chloride formed is 10.43 g
C. The volume of hydrogen gas produced is 1.68 L
B. How do i determine the mass zinc chloride formed?First, we shall write the balanced equation for the reaction. This is given below:
Zn + 2HCI -> ZnCl₂ + H₂
Now, we shall determine the mass of zinc chloride, ZnCl₂ formed. Details below:
Zn + 2HCI -> ZnCl₂ + H₂
Molar mass of Zn = 65.38 g/molMass of Zn from the balanced equation = 1 × 65.38 = 65.38 g Molar mass of ZnCl₂ = 136.38 g/molMass of ZnCl₂ from the balanced equation = 1 × 136.38 = 136.38 gFrom the balanced equation above,
65.38 g of Zn reacted to produce 136.38 g of ZnCl₂
Therefore,
5 g of Zn will react to produce = (5 × 136.38) / 65.38 = 10.43 g of ZnCl₂
Thus, the mass of ZnCl₂ formed is 10.43 g
C. How do i determine the volume of hydrogen gas produced?First, we shall obtain the mass of hydrogen gas produced. Details below:
Zn + 2HCI -> ZnCl₂ + H₂
Molar mass of Zn = 65.38 g/molMass of Zn from the balanced equation = 1 × 65.38 = 65.38 g Molar mass of H₂ = 2 g/molMass of H₂ from the balanced equation = 1 × 2 = 2 gFrom the balanced equation above,
65.38 g of Zn reacted to produce 2 g of H₂
Therefore,
5 g of Zn will react to produce = (5 × 2) / 65.38 = 0.15 g of H₂
Finally, we shall determine the volume of H₂ produced. Details below:
2 g of H₂ = 22.4 L
Therefore
0.15 g of H₂ = (0.15 g × 22.4 L) / 2 g
0.15 g of H₂ = 1.68 L
Thus, the volume of H₂ produced is 1.68 L
Learn more about mass produced:
https://brainly.com/question/9526265
#SPJ1
Complete the balanced molecular chemical equation for the reaction below. If no reaction occurs, write NR after the reaction arrow. Be sure to include the proper phases for all species within the reaction.
ZnC|2(aq) + Hgz(NOs)2(aq)—>
Zinc carbonate reacts with hydrogen nitrate in the following balanced chemical equation: 2ZnCO3(aq) + HNO3(aq) 2Zn(NO3)2(aq) + CO2(g) + H2O(l). The reactant on the left side of the equation is the solid zinc carbonate (ZnCO3).
The reactant on the right side of the equation is an aqueous solution of hydrogen nitrate (HNO3). The end results are water (H2O), carbon dioxide (CO2) as a gas, and zinc nitrate (Zn(NO3)2) also in an aqueous solution. For a reaction to take place, each of the reactants and products must be in the appropriate phase.
The mole ratio of the reactants is 1:1, hence each species' coefficient in the balanced equation must be equal. The coefficient in the balanced equation is two.
Learn more about reactants at:
https://brainly.com/question/17096236
#SPJ1
Calculate the percent by mass of the indicated element in the following compounds. Recall that 2 decimal places should be used for all molar masses, except for hydrogen.
a) CaH2: calcium =
b) UF4:: uranium =
c) C12H4Cl4O2: carbon =
hydrogen =
oxygen =
d) CaCO3: calcium =
Which of the following has the bonds correctly arranged in order of increasing polarity?
Question 15 options:
a)
Be-F, Mg-F, N-F, O-F
b)
O-F, N-F, Be-F, Mg-F
c)
O-F, Be-F, Mg-F, N-F
d)
N-F, Be-F, Mg-F, O-F
e)
Mg-F, Be-F, N-F, O-F
O-F, N-F, Be-F, Mg-F has the bonds correctly arranged in order of increasing polarity. Therefore, the correct option is option B.
Polarity is the transportation of electrical charge among the atoms connected by a chemical bond. Because both hydrogen atoms in H2 are neutral in their electrical properties, bonds among atoms of various substances are electrically inequivalent, as opposed to bonds among identical atoms, which are electrically uniform.
For instance, the chlorine atom has a slightly negative charge while the hydrogen atom becomes slightly positively charged in hydrogen chloride. Partial charges are the tiny electrical charges that exist on different atoms, and their existence indicates the presence of a polar connection. O-F, N-F, Be-F, Mg-F has the bonds correctly arranged in order of increasing polarity.
Therefore, the correct option is option B.
To know more about Polarity, here:
https://brainly.com/question/30002497
#SPJ1