The energy that occur during the process of photosynthesis that changes to convert light energy into chemical energy stored in carbohydrates.
What is meant by photosynthesis?Photosynthesis occurs in plants that have chlorophyll and converts the solar energy absorbed into the chemical fuel required for energy generation.
Photosynthesis is primarily responsible for producing and sustaining the oxygen content of the Earth's atmosphere, as well as providing the majority of the energy required for life on Earth.
Plant leaves absorb sunlight and convert it into glucose and oxygen with the help of water and carbon dioxide.
Carbohydrates are broken down and undergo chemical changes in the presence of sun radiation, resulting in sustenance.
As a result, light energy is converted into chemical power during photosynthesis.
The plants convert the sunlight into glucose and oxygen with the help of water and carbon dioxide.
To know more about photosynthesis, visit:
https://brainly.com/question/1388366
#SPJ4
what is the force of gravity between samantha and the earth? samantha's mass: 55.80 kg, earths mass: 6.0 x 1024 kg, radius of earth: 6.4 x 106 m
The gravitational pull of the earth on Samantha is 3.6 x 1022, which is the force that pulls objects toward the center of a planet or other body.
What does the term "human gravity" mean?Gravity is the downward force or pull that the earth exerts on your body. Your body's mass was concentrated at the point where your center of mass is located. Gravity center The center of gravity of the human body is a notional position where the gravitational force is also said to appear to act (COG).
What is the origin of gravity?Every physical thing in the universe is impacted by the gravitational force, also known as gravity. Any two non-zero mass objects or particles will gravitationally tend to gravitate toward one another. Gravity has an impact on everything, from atomic particles to galaxy clusters.
To know more about gravity visit;
https://brainly.com/question/9722860
#SPJ4
Why does a shaved camel standing in the sun require more water than an unshorn camel?.
The shaved camel has more evaporation than unshorn camel so it needs more water.
In order to lower the bog, the sweat, or more specifically its evaporation, cools the air around the body.
why does camels produce little sweat and urine?
A camel can easily withstand extreme temperatures.
Most of a camel's fat is deposited in its humps, unlike many other mammals, allowing for improved thermoregulatory. It is easier for them to release heat from their bodies in warmer climates. Camels seldom ever perspire. They are far better able to withstand the heat than we are.
During the day, their body temperature fluctuates, rising with the greater outside warmth and falling at midnight when it is colder. Although it may seem odd that camels have fur when they live in such desert areas, their hairs really act as insulation to keep them cool.
Therefore, The shaved camel has more evaporation than unshorn camel so it needs more water.
To learn more about why does camels produce little sweat and urine
Here: https://brainly.com/question/1621610
#SPJ4
The shaved camel has more evaporation than unshorn camel so it needs more water. In order to lower the bog, the sweat, or more specifically its evaporation, cools the air around the body.
Why does camels produce little sweat and urine?
A camel can easily withstand extreme temperatures. Most of a camel's fat is deposited in its humps, unlike many other mammals, allowing for improved thermoregulatory. It is easier for them to release heat from their bodies in warmer climates. Camels seldom ever perspire. They are far better able to withstand the heat than we are.
During the day, their body temperature fluctuates, rising with the greater outside warmth and falling at midnight when it is colder. Although it may seem odd that camels have fur when they live in such desert areas, their hairs really act as insulation to keep them cool.
Therefore, the shaved camel has more evaporation than unshorn camel so it needs more water.
To learn more about why does camels produce little sweat and urine
brainly.com/question/1621610
#SPJ4
During a classroom lab activity, students built each of the circuits shown below and measured the current and resistance in each circuit. Each circuit contains a 1. 5-volt battery and each bulb has a resistance of 50 Ω.
When the switch is closed, in which circuit would resistance be the highest and current be lowest?
Answer:3 the highest 1 the lowest
Explanation:
When the switch is closed, in the third circuit the resistance would be the highest and the current be the lowest, so option B is correct.
What is current?When describing how much electricity flows through a circuit and how it flows in an electronic circuit, the term "electric current" is often employed. It is measured in amperes (A). The ampere number rises as more electricity flows through the circuit.
Given:
The Voltage in the circuit, V = 1.5 volts,
The resistance in the circuit, R = 50 Ω,
As you can see in the third diagram, there is a parallel connection of the bulb, so the voltage in the circuit will remain the same and the current depends on the resistor, so there will be higher resistance in this circuit.
And if the resistance is high the current flow will be low, (By Ohm's law)
In the first circuit, there is only one bulb, so resistance will be low, and the current flow will be high.
Therefore, when the switch is closed, in the third circuit the resistance would be the highest and the current be the lowest.
To know more about Current:
https://brainly.com/question/9264889
#SPJ2
How did you find the speed of the ball at the bottom of the ramp?
The speed of the ball at the bottom of the ramp is obtained by taking the square root of 2 times gravity times height of the ramp (v = √2gh).
What is the speed of the ball at the bottom of the ramp?The speed of the ball at the bottom of the ramp is calculated by applying the principle of conservation of energy as shown below.
According to principle of conservation of energy;
kinetic energy of the ball at bottom of the ramp = potential energy of the ball at the maximum height of the ramp
K.E(bottom) = P.E(top)
¹/₂mv² = mgh
v² = 2gh
v = √2gh
where;
v is the speed of the ball at the bottom of the ramph is the height of the rampg is acceleration due to gravityLearn more about conservation of energy here: https://brainly.com/question/166559
#SPJ1
what is the microscopic term for when a slide should be in focus at a higher magnification once you have proeprly focused
When a slide needs to be in focus at a greater magnification after being properly focused, it is known as a compound microscope in microscopy.
How does a compound microscope work?Compound microscope definition. A high-resolution microscope with two sets of lenses produces a two-dimensional image of a sample. When more than a lens is used in the microscope, it is referred to as a compound lens. Additionally, one of the varieties of optical microscopes is the compound microscope.
What are the functions of compound microscopes?Compound microscopes are used to look at tiny samples that are invisible to the. These samples are frequently put on slides for viewing under a microscope. When utilizing a stereo microscope, slides are not required because there is more room under the lens for larger objects like rocks or flowers.
To know more about compound microscopes visit:
https://brainly.com/question/1622133
#SPJ4
question: how does the size of the milky way compare to the size of the spiral nebulae in your random sample? is the milky way many times larger than, many times smaller than, or typical of the spiral nebulae? (2 points)
Our Solar System is contained within the Milky Way galaxy, which gets its name from how it appears to us on Earth: a hazy ribbon of light visible in the night sky made up of stars that are too close together to be seen individually.
Our galaxy is around 100,000 light-years big and likely includes 100 to 400 billion stars. That sounds enormous, and it is—at least until we start putting it in the context of other galaxies.
The Milky Way is a massive cluster of stars, gas, and dust. Because it would appear to be a spinning pinwheel from the top or bottom, this galaxy is known as a spiral galaxy. About 25,000 light-years from the galactic center, on one of the spiral arms, is where the Sun can be found.
Spiral nebulae are objects that resemble spiral-shaped clouds but which are actually galaxies outside of our Milky Way galaxy.
Shapely asserted that what were then referred to as "spiral nebulae," such as Andromeda, are nearby and far smaller than the Milky Way, and that the Milky Way is so large that it is the main object in the cosmos.
To know more about spiral nebulae, click on the link below:
https://brainly.com/question/13956361
#SPJ4
The driver of a 1000 kg car is speeding. He loses control and collides with a wall, coming to a stop.
The crumple zone of the car absorbed 90 kN of force in 0.5 seconds. What was the car's speed at the
time of impact?
45 m/s is the car's speed at the time of impact.
m=1000 kg
F=90 kN= 90000 N
T= 0.5 seconds
F=mv/t
v=Ft/m
v=90000×0.5 ÷1000
V=45 m/s
Speed is a scalar variable that expresses how much an object's location varies over time or how much it moves per unit of time. It is frequently abbreviated as "s."
The distance traveled by an object during a period of time divided by the length of the period gives the average speed of the object throughout that period.
The speed-related measures are time divided by distance. The most prevalent unit of speed in daily life is the kilometer per hour (kph), but the SI measure of speed is the meter per second (m/s).
To know more about speed visit : brainly.com/question/93357
#SPJ9
A double-slit experiment yields an interference pattern due to the path length difference from light traveling through one slit versus the other. Why does a single slit show a diffraction pattern?.
Light bends around the obstacles like the waves and this bend cause the diffraction pattern. single slit shows a diffraction pattern because of the path length difference from waves originating at different parts of the slit.
The double-slit experiment demonstrates that mild and remember can show traits of each classically described wave and debris; moreover, it presents the fundamentally probabilistic nature of quantum.
Mechanical phenomena. young's authentic double-slit experiments have been in fact the primary to illustrate the phenomenon of interference. when he shone mildly via two slender slits and determined the sample created on the display screen, the younger did not locate brilliant regions similar to the slits, however as an alternative noticed vivid and darkish fringes.
Learn more about the double-slit experiment here:-https://brainly.com/question/13146739
#SPJ4
at one instant, the two conductors in a long household extension cord carry equal 5.00-a currents in opposite directions. the two wires are 3.00 mm apart. find the magnetic field 35.0 cm away from the middle of the straight cord, in the plane of the two wires.
The magnetic field 35.0 cm away from the middle of the straight cord, in the plane of the two wires is 1.96 T j
What is meant by magnetic field?A magnetic field is a vector field that explains the magnetic influence on moving electric charges, electric currents, and magnetic materials. A moving charge in a magnetic field experiences a force that is perpendicular to both its own velocity and the magnetic field.
The magnetic field is a technique used to describe how magnetic force is distributed in the space surrounding and within something magnetic in nature.
Given,
A long household extension cord's two conductors carry equal 5.00-a currents in opposite directions at the same time.
And also given that the two wires are 3.00 mm apart.
Let B₁ be inside the plane and B₂ be outside the plane.
It is required to calculate the magnetic field at point A
The directions of the magnetic field at A can be calculated using Right hand rule.
[tex]B_{net}[/tex] = B₂ -B₁
[tex]B_{net}[/tex]=μ₀I/2Π(0.35-(3×10⁻³)/5) - μ₀I/2Π(0.35+(3×10⁻³)/5)
[tex]B_{net}[/tex]= 1.96×10⁻⁹ TJ
To know more about magnetic field, visit:
https://brainly.com/question/14848188
#SPJ4
Use the simulation to answer the question.
Force and Motion Basics (select Acceleration)
What happens to the acceleration when the net applied force acting on the box increases?
(1 point)
O It becomes zero.
O It decreases.
O It remains the same.
O It increases.
Answer:
it increases
Explanation:
from the top of a tall building, you drop two table tennis balls, one filled with air and the other with water. both experience air resistance as they fall. which ball reaches terminal velocity first? do both hit the ground at the same time?
The air-filled table tennis ball is the first to reach the terminal velocity.
No, the water-filled table tennis ball will be the first to hit the ground.
What is meant by terminal velocity?The maximum velocity attained by an object as it falls through a fluid is known as terminal velocity.
It demonstrates that the terminal velocity of a body is directly related to the object's weight for the same radius.
The lighter air filter table tennis is the first to attain terminal velocity. Because its mass is lighter for the same shape and size, the friction force of upward resistance equals the downward force of mg sooner. To hit If the terminal velocity of the water-filled table tennis ball is greater and it strikes the ground first, the force of gravity on the ball increases.
To know more about terminal velocity, visit:
https://brainly.com/question/2654450
#SPJ4
A cook heats a meal in a microwave oven. What energy transformations occur between the microwave oven and the meal?.
Energy transformations that occur between the microwave oven and the meal when a cook heats a meal in a microwave oven is electrical energy to electromagnetic energy to thermal energy.
Microwaves are one of many different forms of energy that occur in nature. Other forms include visible light, radio waves, and X-Rays. Microwaves are very short waves, hence the prefix micro- , which means "small." When microwaves hit water molecules, for example, the water molecules begin to bounce around, hitting against one another. Something hitting against something else causes friction. Friction produces heat, which can be used to cook food.
How do microwaves cook?
Microwaves are absorbed by the water, fats, and sugars in food and are converted into heat, which cooks the food. Because most plastics, glass, and ceramics do not absorb microwaves, the microwaves heat food without heating the container or the inside of the oven. If a container is hot when you take it out of the microwave oven, it is because the hot food has conducted heat to the container.
So basically, microwave oven is electrical energy (microwave oven needs to be plugged into power outlet to turn it on) into electromagnetic energy (where the wave of energy starts to travel and absorbed by the water, fats, and sugars in food) into thermal energy (which comes from the molecule begin to bounce around, hitting against one another, that will cause friction which produces heat and can be used to cook food).
Learn more about microwave https://brainly.com/question/28597449
#SPJ4
What are one of the benefits of keeping your supplies stocked and your electronics in working order? It ensures that you have lots of options about how to do your homework. It allows you to do your best the first time. It makes sure your work does not take too long. It ensures that you do your work.
One of the benefits of keeping your supplies stocked and your electronics in a perfect working condition is that:
It makes sure your work does not take too long
How keeping supplies stocked and electronics in working order saves timesIn a normal system and environment, the importance of keeping goods or supplies well cannot be overemphasized. In such a system, when customers comes to get goods, it makes it easier for them to release as it won't take much time presenting it.
That being said, our electronics too, when they are in a perfect order of arrangements, puts them in good condition.
In conclusion, when we keep supplies stocked, it helps to saves time.
Read more on stocked:
https://brainly.com/question/13879594
#SPJ1
HELP STUCK IN PHYSICS 100PTS!!!
A small piece of putty of mass 27 g and
negligible size has a speed of 2.2 m/s. It makes
a collision with a rod of length 5 cm and mass
78 g (initially at rest) such that the putty hits
the very end of the rod. The putty sticks to
the end of the rod and spins around after the
collision; the putty-rod center of mass CM has
a linear velocity v and an angular velocity ω
about the CM.
(a)What is the angular momentum of the system relative to the CM after the collision?
The rod has a moment of inertia equal to (1/12)MR^2
about its center of mass; consider
the piece of putty as a point mass. Assume
the collision takes place in outer space where
there is no gravitational field and no friction.
Answer in units of kg · m2
/s.
(b)What is the system’s angular speed about the
CM after the collision?
Answer in units of rad/s.
please help I'm so confused :(
Assume: This collision takes place in outer space where there is no gravitational field and no friction. A small piece of putty of mass 31 g and negligible size has a speed of 2.5 m/s. It makes a collision with a rod of length 3 cm and mass 83 g (initially at rest) such that the putty hits the very end of the rod. The putty sticks to the end of the rod and spins around after the collision. After the collisions the center-of-mass has a linear velocity V and an angular velocity ω about the center-of-mass “+ cm”. What is the velocity V of the center-of-mass of the system after the collision? Answer in units of m/s. Icm = 1/12 MR^2 Ipm = MR^2 The Attempt at a Solution First I said that that the moment of inertia for the system is I=1/12(M+m)R^2 ("M" being the mass of the rod and "m" being the mass of the putty) Then using conservation of angular momentum i got: mR^2w = (R^2/12)(M+m)w substituting the respect v's (and Rs) in for w i got: mv1R = (R/12)(M+m)v2 then v2 = 12mv1/(M+m) plugging in my numbers i got [12(31)(2.5)]/[(31+83)] = 8.16 m/s
Uv rays are a type of ""ionizing radiation"" and are energetic enough to damage biological tissue such that they degrade into ions and electrons. What other forms of electromagnetic radiation do you think could be ionizing?.
The other forms of electromagnetic radiation you think could be ionizing are x-rays and gamma rays.
Ionizing radiation, including nuclear radiation, consists of subatomic debris or electromagnetic waves which have sufficient strength to ionize atoms or molecules by using detaching electrons from them.
Electromagnetic radiation consists of waves of the electromagnetic subject, which propagate thru an area and deliver electromagnetic radiant electricity. It includes radio waves, microwaves, infrared, light, ultraviolet, X-rays, and gamma rays. All of those waves form part of the electromagnetic spectrum.
Learn more about electromagnetic radiation here:-https://brainly.com/question/1408043
#SPJ4
What happens to form the brown spots on a tlc plate when you place the developed tlc plate in an iodine chamber?.
Iodine sublimates and reacts with the compounds on the produced TLC plate when it is placed in the chamber and covered, producing yellow-brown spots.
Iodine interacts with many different chemical molecules to produce colorful complexes, which causes coloration. About half of the possible chemicals will work with this stain. For every step see attached file.
Because complexation is reversible and the original chemical will eventually remain on the TLC plate when the iodine has evaporated, this procedure is regarded as "semi-destructive." It is potentially feasible to utilize a different visualization method on the TLC plate after the coloring fades, though it's likely the compound may already have evaporated by then.
For more questions like TLC plate click the link below:
https://brainly.com/question/29414463
#SPJ4
an object is rolling without slipping. what percentage of its total kinetic energy is its translational kinetic energy if the object is (a) a uniform sphere, (b) a uniform cylinder, or (c) a hoop?
When the object is a sphere of Radius R and mass M the 60% of its total kinetic energy is its translational kinetic energy.
What is a kinetic energy?
The kinetic energy of an object is termed as the energy it posses because of its motion.
What is translational kinetic energy?The translational kinetic energy is the energy required to move or accelerate the object from its position of rest.It is described as the effort required to move a mass-determined body from rest to the indicated velocity.
The moment of inertia of the object will be⇒I =2/3MR2
Sphere is rolling without slip ,v=Rω (v= speed of centre of mass and ω is angular speed)
Translational KE =1/2Mv2
Rotational KE = 1/2Iω2=1/2(2/3MR2)x(V/R)2=1/3Mv2
Total KE= 1/2Mv2 +1/3Mv2 =5/6 Mv2
Now % of Translational Energy= 1/2Mv2 ÷ 5/6 Mv2 x100 = 60%
Hence, when the object is a sphere of Radius R and mass M the 60% of its total kinetic energy is its translational kinetic energy.
To know more about the kinetic energy visit
https://brainly.com/question/26472013
#SPJ4
To serve a single load that will not operate more than 3 hours, 1 awg conductors are installed. These branch circuit conductors can be protected by a circuit breaker with a rating no greater than ___ amps.
The correct answer of branch circuit conductors can be protected by a circuit breaker with a rating no greater than should be 125 amps.
What Size Wire Do We Need for My Breaker?
The accepted system for this measurement is AWG. A smaller wire size is indicated by a greater number in the wire gauge scale, which runs from high to low.
The circuit conductors between the outlet and the final overcurrent device protecting the circuit are referred to as branch circuits (s).
The circuit conductors between the outlet and the final overcurrent device protecting the circuit are referred to as branch circuits (s). If the conductors are on the load side of the final branch circuit overcurrent device, even conductors for a circuit rated at 1000 amps are a branch circuit.
The branch-circuit conductors that supply loads other than those listed in 210.3 and other than the cooking appliances covered by 210.19 must have an ampacity sufficient for the loads served and must not be lower than 14 AWG.
To learn more about conductors in branch circuit from the given link
https://brainly.com/question/28341775
#SPJ4
SOLVE THIS FAST PLS I NEED THIS TODAY ITS EASY BUT I DO NOT UNDERSTAND AS MUCH
Answer in attachment
The principle that properties such as mass, volume, and number remain the same despite changes in the forms of objects is called.
The principle that properties such as mass, volume, and number remain the same despite changes in the forms of objects is called the principle of conservation.
The concept of preservation is the idea that the quantity does not change even if the appearance changes. The same is true for variables such as volume, quantity, and area. The ability to understand that the distribution of matter does not affect its mass, quantity, volume, or length is more specifically what is meant by conservation.
In physics, a conservation law states that particular a particular measurable system does not change as the system evolves over time.
The principal has 6 laws which are
conservation of energy conservation of linear momentumconservation of angular momentumcharge baryon number and lepton numberTo learn more about the conservation principle click https://brainly.com/question/28994704?referrer=searchResults
#SJP4
Hot air is less dense than cold air. Could a hot-air balloon be flown on the moon, where there is no atmosphere?.
A hot-air balloon be flown on the moon, buoyancy force wouldn't exist because there isn't any cold air to replace it.
What is density?
Density: Solid substance mass per unit volume M stands for mass and V for volume, and the formula for density is d = M/V. Grams per cubic centimetre is the unit of density that is most frequently used.
What is gravity?
The ratio of a substance's density (mass per unit volume) to a given reference material, frequently a liquid, is known as its specific gravity. The density of a substance (g/mL) equals the specific gravity of water at the same temperature (g/mL).
What is buoyancy ?
Buoyancy is the tendency of an object to float in a fluid. When there is gravity present, an upward force known as the buoyant force is felt by any object submerged in a liquid or gas. Pressure differences acting on an object's opposing sides cause buoyancy when it is submerged in a static fluid.
The buoyancy force wouldn't exist because there isn't any cold air to replace it.
Therefore, Could a hot-air balloon be flown on the moon, buoyancy force wouldn't exist because there isn't any cold air to replace it.
Learn more about density from the given link.
https://brainly.com/question/406690
#SPJ4
What is injection molding process?
Injection molding is a method to obtain molded products by injecting the plastic material molten by heat into a mold, and then cooling and solidifying these products. The method is suitable for the mass production of products with different and complicated shapes, and takes a large part in the area of plastic processing.
There are four stages in the cycle. These stages are the clamping, injection, cooling and ejection.
For example, there are several products and industries where injection molding is used, like in producing toys, bottle caps, surgical devices, jewel boxes, and even automotive components.
Separate materials can be combined in one part in a type of injection moulding defined as a two-shot mould. This technique can be used to add a soft touch to proper plastic products, add colours to a part or produce items with different performance levels.
Learn about injection molding
https://brainly.com/question/12977124
Injection moulding is a method to obtain moulded products by injecting the plastic material molten by heat into a mould, and then cooling and solidifying these products.
Define injection molding?
Injection moulding is a manufacturing process that involves injecting molten material into a mould. Injection moulding can be done with a variety of materials, the most frequent of which being metals (for which the technique is known as die-casting), glassware, elastomers, confections, and, most typically, thermoplastic and thermosetting polymers. The part material is supplied into a heated barrel, mixed (using a helical screw), and injected into a mould cavity, where it cools and hardens to the cavity's configuration. After a product is designed, a mould-maker (or toolmaker) creates moulds from metal that are precision-machined to form the intended part's features. Injection moulding is commonly utilised for producing a wide range of parts, from small components to whole automotive body panels.
Injection moulding is a method to obtain moulded products by injecting the plastic material molten by heat into a mould, and then cooling and solidifying these products. There are four stages in the cycle. These stages are the clamping, injection, cooling and ejection.
For example, there are several products and industries where injection moulding is used, like in producing toys, bottle caps, surgical devices, jewel boxes, and even automotive components.
Separate materials can be combined in one part in a type of injection moulding defined as a two-shot mould. This technique can be used to add a soft touch to proper plastic products, add colours to a part or produce items with different performance levels.
To learn more about injection molding, click on the link
brainly.com/question/12977124
#SPJ4
consider the motion of a particle in which the position is given as X=3t-3t².what is the average speed at t1=1s and T2=3s
The average speed of a particle in the position X=3t-3t² is 18m/s
What is the average speed at t₁ = 1s and t₂ = 3s?At the position X = 3t - 3t²
t₁ = 1s = X = 3(1) - 3(1)²
X = (3 x 1) - (3 x 1²)
X = 3 - 3 = 0m
At t₂ = 3s = X = 3(3) - 3(3)²
X = (3 x 3) - (3 x 3²)
X = 9 - 27 = -18m
Displacement, Δx = X₂ - X₁
= -18 - 0 = -18m
The change in time would then be
Δt = t₂ - t₁
= 2 - 1 = 1
The Average velocity can be calculated by dividing the change in displacement by the change in time, Vₐ = Δx/Δt
Vₐ = -18m/1s = -18m/s
Find out more on average speed here: https://brainly.com/question/6504879
#SPJ1
A volumetric pipette has an uncertainty of 0. 01cm3. What are the lowest and highest possible volumes for a measurement of 0. 20cm3.
In a volumetric pipette which has an uncertainty of 0. 01 cm³, for a measurement of 0. 20cm3, the lowest possible value is 0.195 cm³
and highest possible value is 0.205 cm³.
Measurement uncertainty = 0.01 cm³
Error = uncertainty value/2 = 0.01/2 = 0.005 cm³
The formula to calculate the possible values for a volumetric pipette with uncertainty0.01 cm³ is give below.
Possible values = measured value ± Error.
Lowest possible value = 0.20 - 0.005
= 0.195 cm³
Highest Possible Value = 0.20 + 0.005
= 0.205 cm³
Thus, for a volumetric pipette, the lowest possible value is 0.195 cm³ and highest possible value is 0.205 cm³.
If you need to learn more about volumetric pipette click here:
https://brainly.com/question/28945018
#SPJ4
During a game of tug-of-war, two students are pulling on a rope. One student pulls to the left with a force of 35 N, while another student pulls to the right with a force of 35 N. What is the net force being applied to the rope, and in which direction will the rope move?
35 N; the rope will move to the right
70 N; the rope will stay stationary
17.5 N; the rope will move up
0 N; the rope will stay stationary
Answer: 0N; the rope will remain stationary
Explanation: Connexus
Net force applied on the rope is 0 N and the rope will stay stationary.
What is force?An object's push or pull is seen as exerting a force. The interaction of the objects produces push and pull. You can also use words like stretch and squeeze to describe force.
The definition of force in physics is: The push or pull on a mass-containing item changes its velocity.
Given that:
One student pulls to the left with a force of 35 N.
Another student pulls to the right with a force of 35 N.
Hence, these forces act in opposite direction.
Net force applied on it = 35 N - 35 N = 0 N.
So, the net force of zero newton being applied to the rope, and the rope remains stationary.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ1
Why is the choice of a radiopharmaceutical important in radioisotope imaging?
A diagram of a closed circuit with a power source on the left labeled 120 V. There are 3 resistors in parallel, separate paths, connected to it labeled 5.0 Ohms, 10.0 Ohms and 15.0 Ohms.
What is the equivalent resistance in this parallel circuit?
Ω
What is the voltage in the circuit?
V
What is the total current in the circuit?
A
The radiopharmaceutical is important in radioisotope imaging because it must be able to show the required organ correctly. The equivalent resistance is 2.72 ohm and the current is 44.1 A.
What is a circuit in parallel?We know that when a circuit have been connected in parallel then it means that the resistors have been connected to a common junction. It is clear that we have the circuit that have the resistors; 5.0 Ohms, 10.0 Ohms and 15.0 Ohms.
We then have;
1/R = 1/5 + 1/10 + 1/15
1/R = 0.2 + 0.1 + 0.067
R = 2.72 ohm
The current in the circuit can be obtained from;
I = 120 V/ 2.72 ohm
I = 44.1 A
Learn more about parallel circuit:https://brainly.com/question/11409042
#SPJ1
In florida, after three months, a driver with a learner's permit may drive until _____.
In florida, after three months, a driver with a learner's permit may drive until 10 P.M.
According to the Florida Department of Highway Safety and Motor Vehicles (HSMV), a learner's daytime license only permits you to drive until 10 p.m. and only during daylight hours for the first three months.
What is learner's liscense?
A learner's permit serves as a restricted driving license that permits a person to practice driving in open spaces around the nation while accompanied by someone who has a regular driving permit.
Therefore, In florida, after three months, a driver with a learner's permit may drive until 10 P.M.
To learn more about learner's liscense
Here: https;//brainly.com/question/26289148
#SPJ4
In florida, after three months, a driver with a learner's permit may drive until 10 P.M.
What is learner's liscense?
A learner's permit serves as a restricted driving license that permits a person to practice driving in open spaces around the nation while accompanied by someone who has a regular driving permit.
According to the Florida Department of Highway Safety and Motor Vehicles (HSMV), a learner's daytime license only permits you to drive until 10 p.m. and only during daylight hours for the first three months.
Therefore, In florida, after three months, a driver with a learner's permit may drive until 10 P.M.
To learn more about learner's liscense
https;//brainly.com/question/26289148
#SPJ4
calculate angular momentum: bat (1.4 kg) radius of gyration of 0.81m. angular velocity of bat is 916.8 deg/s.
The definition of angular momentum (L), with some simplification, is the object's distance from the rotation axis multiplied by the linear momentum: L = r*p or L = mvr.
In rotations about an object's symmetry axis, the angular momentum The product of an object's moment of inertia I and its angular velocity about the selected axis is known as L. L = Iω. The characteristic of any rotating object determined by the product of the moment of inertia and the angular velocity is known as angular momentum. It is a characteristic of rotating bodies determined by the sum of their moment of inertia and angular velocity.
Learn more about momentum here-
https://brainly.com/question/24030570
#SPJ4
Which describes a positive or negative net force acting on an object? Check all that apply
Answer: It can cause an object to accelerate.
It can cause an object to stop moving
It can cause an object to start moving.
It can cause an object to change directions.
It can cause an object at rest to remain at rest.
Explanation:
1. what hypothesis will the experiment test? whether land or water heats faster 2. what are the variables? land and the water 3. what purpose would the sand serve? 4. what purpose would the water serve? 5. what purpose would the heat lamps serve? 6. what purpose would the thermometers use? 7. how can you use these materials to test whether land or water heats faster? 8. how would you compare whether land or water heats faster? 9. within a 24-hour period, at what three points should the temperature be taken? why? 10. what would an effective conclusion need to include?
Land surfaces being darker absorb much more solar radiation than water. . Water leads in reflecting the most solar radiation that reaches the surface back in to the atmosphere.
How does this occur?
Sand heats up faster than water because it contains a lower specific heat. Water one the other hand requires one calorie of energy to raise the temperature of one gram of water by one degree Celsius. Sand takes 19 calories per gram to raise the temperature of the sand by 1 degree Celsius. While Sand requires fewer calories to raise its temperature one degree Celsius and that’s why it heats up faster than water.
Land absorbs more solar radiation the land surface retains more heat as do the vegetation for energy.
Therefore during this experiment the Sand did heat up much faster than water during this experiment. This happened because of the specific heat of the sand caused it to start heating up rapidly under the lamp as the time went.
To know more about specific heat from the given link
https://brainly.com/question/27862577
#SPJ4