The dinosaurs produced a net counterclockwise torque of 9,400Nm about the end of the branch that was attached to the tree. The length of the branch is 4.7m.
τ = Σr × F = rmg
where g is the acceleration caused by gravity, m is the mass, and r is the distance.
Torque has a direct relationship with -
1.the object's mass, in m
2. The mass's separation, r, from the location where the torque is being calculated.
Therefore, the torque will change whether we increase or reduce them.
Therefore, increasing mass will result in an increase in torque, but since we must retain the same torque, we must reduce mass's distance from the location of the torque.
As a result, the mass should be moved closer to the location of the torque.
Total Mass = (80 + 120)kg
= 200kg
Torque = 9400N
τ = Σr × F = rmg
τ = 200 × r × 10
9400 = 200 × r × 10
r = 9400 / 2000
r = 4.7m
To learn more about torque from given link
https://brainly.com/question/17019156
#SPJ4
Can nuclei of the same element have different values of Z? Of N? Of A?
Check all that apply.
O 1 Nuclei of the same element must have the same values of Z, N, and A.
O 2 Nuclei of the same element can have different values of Z.3
O 3 Nuclei of the same element can have different values of A.
O 4 Nuclei of the same element can have different values of N.
Nuclei of the same element can have different values of Z, N, and A, as these values are all related to the number of protons, neutrons, and nucleons in the nucleus, respectively. Therefore, option 2, 3, and 4 are correct.
Nuclei of the same element can have different values of Z, N, and A due to the number of protons, neutrons, and nucleons they contain, respectively. This is because the number of these particles in the nucleus can vary, although they all will still be the same element. Therefore, option 2, 3, and 4 are correct and option 1 is incorrect.
Nuclei of the same element can have different values of Z, N, and A, as these values are all related to the number of protons, neutrons, and nucleons in the nucleus, respectively. Therefore, option 2, 3, and 4 are correct.
learn more about proton here
https://brainly.com/question/12535409
#SPJ4
Why is 90 degrees the best angle for maximum height and air time?
The best angle for maximum height and air time when launching an object is 90 degrees. At 90 degrees, the vertical velocity component is at its maximum, allowing the object to reach the highest point. Additionally, the horizontal velocity component is at its minimum, which means that the object will spend more time in the air.
This is because at 90 degrees, the object is moving straight upward and as gravity acts vertically downwards, the object will reach highest point and stay there for longer time as compare to other angles.
However, it's important to note that 90 degrees is ideal for maximum height, but not for maximum distance traveled. For maximum distance, the optimal angle would be 45 degrees, where the horizontal velocity and vertical velocity are equal, as the object will both travel the farthest and reach the highest point.
To know more about velocity click below:
https://brainly.com/question/18084516#
#SPJ4
A focus mirror sculpture was opened in Rockefeller Centre in New York City in 2006. Standing three storeys tall and weighing 23 tonnes, its concave side faced the Rockefeller Centre and its convex side faced 5th Avenue.
A. What is the nature of the image of 5th Avenue?
B. Which property of concave mirror is utilised for using them as shaving mirrors?
C. A taxi on 5th Ave is located 38 metres from the convex side of this culture and its image is 1/5 the size of the taxi. Determine the focal length of the mirror.
D. Estimate the image size of the 270 metre tall Rockefeller Centre if it is located an estimated distance of 100 metres from the concave mirrors surface of focal length 10 metre.
A. The nature of the image of 5th Avenue in the mirror sculpture is that it is a virtual, upright, and smaller image. This is because the concave mirror is used to reflect light outwards, creating a virtual image that cannot be projected onto a screen.
B. The property of concave mirrors that is utilized for using them as shaving mirrors is their ability to form a smaller, magnified image. This is because concave mirrors have a negative focal length, which causes light rays to diverge and form a smaller image that is closer to the mirror.
C. To determine the focal length of the mirror, we can use the formula 1/f = 1/u + 1/v, where f is the focal length, u is the object distance (38 meters), and v is the image distance (unknown). We know that the image size is 1/5 the size of the object, so we can set v = -5u (since the image is virtual and inverted). Substituting these values into the formula and solving for f, we get f = -(5u^2)/4 = -(5(38^2))/4 = -4725/4 = -1181.25 meters.
D. To estimate the image size of the 270 meter tall Rockefeller Centre, we can use the formula: h' = -h * (u/f) where h' is the image height, h is the object height (270 meters), u is the object distance (100 meters) and f is the focal length (10 meters). Substituting these values in the formula, h' = -270 * (100/10) = -2700 meters. This means the image of the Rockefeller Centre would be 2700 meters tall, which is not possible because it's taller than the building itself. This is an indication that the image is not real and is a virtual image.
What is the difference between flat mirrors and curved mirrors?Unlike plane mirrors, spherical mirrors form images that are different in size from the size of the object. While the convex mirror forms images that are always smaller than the object, the concave mirror forms images of different sizes, depending on the position in which the object is placed on its axis.
Learn more about convex mirror in brainly.com/question/11627506
#SPJ1
Ball A od mass 5.0 kilograms moving at 20. meters per second colides with ball B of imknnown mass moving at 10 meters per scond in the same direction. After the collision, ball A movies at 10. meters per second and ball B at 15 meters per second, both still in the same direction. What is the mass of ball B
Answer:
10 kg
Explanation:
Use law of conservation of momentum
momentum of system before collision = momentum of system after collision
5 kg * 20 m/s + x kg * 10 m/s = 5 kg * 10 m/s + x kg * 15 m/s
100 + 10x = 50 + 15 x
50 = 5x
x = 10 kg
For which of the regions shown in the figure is the observed effect the strongest? O Region B O Region C
O The observed effect is the same for all three regions O Region A
D) Region A. The observed effect is strongest in Region A, as this region contains the most extreme temperatures and the most extreme change in temperature over time.
What is temperatures ?
Temperatures refer to the degree of hot or cold that something is. It is typically measured in either Celsius or Fahrenheit, with Celsius being the most common metric used.
Temperatures can range from extreme cold to extreme heat, with average temperatures ranging from -40 to 40 degrees Celsius. Temperatures can be affected by a number of factors, including altitude, latitude, and proximity to the ocean. Different climates can experience vastly different temperatures, making it important to know the temperature of a particular area before traveling.
To learn about more temperatures.
https://brainly.com/question/24746268
#SPJ4
The ECG waveform has various components such as waves, segments, and intervals; when these components differ from the expected norm, this indicates:
The ECG waveform has many components such as segments, waves, and intervals; when these components differ from the expected forms, this indicates dysrhythmia.
An abnormal or irregular heartbeat is referred to as cardiac dysrhythmia. Your heart may beat too slowly or too fastly if you have dysrhythmia. Or your heart's rhythm may be disturbed, giving you the sensation that your heart missed a beat.
Thus, when the ECG waveform is different than normally it is expected, it shows a sign of dysrhythmia. When a person experiences dysrhythmia, and the rate of their heartbeat becomes irregular but still, it lies within the normal range.
You can learn more about dysrhythmia at
https://brainly.com/question/28198574
#SPJ4
15. A uniform beam AB of length 100m and weight 20N rests on a supports P and Q placed 20m from each end of the beam. Weights of 50N and 5N are placed at A and B respectively. Calculate the reaction at P and Q.
PLS I BEG SHARP RESPONSE
Answer:
Peter and John is a plate of rice together peterhead 2/5 of the quantity of rice white drone x 1/3 who ate more food than the other
Calculate the momentum for each case and rank each of the following from least to greatest in terms of the amount of momentum each possesses. A 10kg object moving at 10 m/s A 30 kg moving at 5 m/s A 5 kg bject moving at -25 m/s A 100N object moving at 5 m/
Ranking each of the following from least to greatest in terms of the amount of momentum each possesses:
A 5 kg object moving at -25 m/s < A 100N object moving at 5 m/s < A 10kg object moving at 10 m/s < A 30 kg moving at 5 m/s
What is momentum?Momentum is the product of a particle's mass and velocity. The fact that momentum is a vector quantity means that it has both magnitude and direction. The force pushing a particle has an equal-and-opposite impact on the speed at which its momentum changes, according to Isaac Newton's second law of motion. Take a look at Newton's laws of motion.
Newton's second law states that if a particle experiences a constant force for a predetermined period of time, the impulse—which is equal to the force multiplied by the duration—will equal the change in momentum. The amount of time required for a consistent force to bring a particle to rest, in contrast, is measured by a particle's momentum.
We know that momentum, p = mv
Where,
p = momentum
m = mass
v = velocity
Substituting the value in formula we get,
1. A 10kg object moving at 10 m/s
p = 10 × 10
= 100 kg⋅m/s
2. A 30 kg moving at 5 m/s
p = 30 × 5
= 150 kg⋅m/s
3. A 5 kg object moving at -25 m/s
p = 5 × -25
= -125 kg⋅m/s
4. A 100N object moving at 5 m/s
p = (100 × 0.10197 kg) × 5
= 10.197 × 5
= 50.985 kg⋅m/s
Learn more about Momentum
https://brainly.com/question/24030570
#SPJ4
How many resistors must be connected in series to give an equivalent resistance to five resistors connected in parallel
The value of the resistor of five parallel-connected resistors is R/5 ohm. Hence, 5 resistors of resistance R/25 ohm connected in series to give an equivalent resistance to five resistors connected in parallel
What is a resistor?Modern resistors are often constructed from a carbon, metals, or metal-oxide layer. In these resistors, an insulating material is covered in a helix around a thin layer of conductive (but still resistant) material.
What a resistor does in a circuitA resistor is a component of an electronic device that regulates or limits the amount of electrical current that can flow through a circuit. Resistors can also supply a certain amount of power to an electronic appliance like a transistor. A light bulb illuminates when power is applied to the resistor tungsten. The end results of the energy are heat and light.
To know more about resistors visit:-
https://brainly.com/question/29315138
#SPJ4
the force exerted on the rope by the ceiling is in the _____ direction.
The force exerted on the rope by the ceiling is in the vertical direction. This means that the force is pushing straight down on the rope and is perpendicular to the plane of the ceiling.
The force exerted on the rope by the ceiling is the result of the gravity of the rope itself and the weight of any objects or materials that are attached to the rope.
In order for the force to remain in the vertical direction, the rope must be secured at the top of the ceiling and not allowed to move in any other direction. If the rope were to move in any other direction, the force exerted on the rope by the ceiling would no longer be in the vertical direction and the rope would no longer remain secure.
Learn more about force:
https://brainly.com/question/25239010
#SPJ4
11. A weightless bar AB is pivoted at its centre and weight of 10N and 30N are attached on side A at 4m and 2m from the pivot respectively. These weights are balanced by a weight of 25N on the other side B. How far is the 25N weight from the pivot?
Answer:
-3.2m
Explanation:
To find the distance of the 25N weight from the pivot, we can use the concept of moments. The moment of a force is the product of the force and the perpendicular distance from the pivot to the line of action of the force.
The total moment about the pivot due to the weights on side A is:
Moment_A = (10N * 4m) + (30N * 2m) = 80Nm
The moment of the 25N weight on side B must be equal and opposite to the total moment of the weights on side A, so we can set up the following equation:
Moment_B = -80Nm
We can solve for the distance of the 25N weight from the pivot by rearranging the equation to solve for x:
x = Moment_B / 25N = -80Nm / 25N = -3.2m
So the distance of the 25N weight from the pivot is -3.2m. This means that the weight is 3.2m to the left of the pivot, since the pivot is taken as the origin for the purpose of calculating moments.
40 points!
What is the expected life span of a star with a low stellar mass, a relatively cool temperature, and dim relative brightness?
1 to 10 million years
10 to 100 million years
1,000 to 10,000 million years
10,000 to 200,000 million years
The expected life span of a star with a low stellar mass, a relatively cool temperature, and dim relative brightness is 10,000 to 200,000 million years and is therefore denoted as option D.
What is a Star?This is referred to as an astronomical object comprising a luminous spheroid of plasma held together by its gravity an d they are usually visible at night.
We should also note that stars with a high stellar mass burn burn their fuel at a much faster rate and can shine for just millions of years while on the other hand stars with a low stellar mass burn burn their fuel at a much slower rate and can shine for just billions of years.
This therefore means that the expected life span of a star with a low stellar mass and dim relative brightness will most likely be between 10,000 to 200,000 million years hence why option D was chosen.
Read more about Stars here https://brainly.com/question/21379923
#SPJ1
When the velocity arrow and the acceleration arrow both point in the same direction, the velocity of the object is decreasing.
It is a False statement, because the acceleration arrow points forward, but the velocity arrow is reversed.
What is meant by acceleration?
Any modification of motion's speed or direction is referred to as acceleration. When anything is speeding up, slowing down, or not travelling straight ahead, it is said to be accelerating.In mechanics, acceleration is the rate at which an object's velocity with respect to time changes. Vector quantities include accelerations.An object's acceleration is oriented according to the direction of the net force acting on it. the degree to which an object accelerates, as stated by Newton's Second Law.When a vehicle accelerates in its present direction of motion, this is referred to as linear acceleration (or tangential acceleration in circular motions), and the reaction felt by the passengers is a force that pulls them back into their seats.To learn more about acceleration refer to
https://brainly.com/question/460763
#SPJ4
10 points!
Which measuring tool should be used to measure the length of a marble track?
graduated cylinder
spring scale
metric ruler
stopwatch
Answer:
metric ruler
Explanation:
it counts legnth
If you need to stop quickly and your vehicle is not equipped with an Anti-Lock Braking System (ABS), you should:
It is important to note that vehicles without ABS may take longer to stop and have a greater risk of skidding or losing control, so it's important to be aware of the stopping distance and to drive with caution.
What is ABS?Anti-Lock Braking System (ABS) is an advanced safety feature that is commonly found in modern vehicles. It is designed to prevent the wheels of a vehicle from locking up during braking, which can cause the vehicle to skid and lose control.
If you need to stop quickly and your vehicle is not equipped with an Anti-Lock Braking System (ABS), you should:
Press the brake pedal firmly and steady, do not pump the brakes.
Steer the vehicle in the direction you want to go.
Avoid locking up the wheels by applying the brake pressure smoothly and progressively.
If the wheels lock, release the brake pedal slightly to regain traction and then reapply the brake pressure.
Keep a safe distance from the vehicle in front of you to give yourself more time to react and stop.
Hence, by following the above mentioned steps you can quickly stop a car not equipped with ABS.
To learn more about ABS from the given link:
brainly.com/question/8555918
#SPJ4
J
If a building is 17 m tall, how long would it take to hit the ground?
It would take approximately 0.45 seconds for a 17 m tall building to hit the ground.
What is distance?
Distance is the amount of space between two objects or points. It is measured in units such as meters, feet, or miles. Distance can also refer to the length of time it takes for something to happen, such as the distance between two events.
This is calculated by using the formula: time = (distance)/(gravity x 2). In this case, distance is 17m and gravity is 9.8 m/s2, so time = (17 m)/(9.8 m/s2 x 2) = 0.45 seconds.
Distance may also refer to the emotional or physical separation between two people or groups. Distance can be expressed as a physical, mental, or emotional concept.
To learn about more distance.
brainly.com/question/26550516
#SPJ1
The driver of a car traveling at 30.2 m/s applies the brakes and undergoes a constant deceleration of 1.4 m/s 2 . How many revolutions does each tire make before the car comes to a stop, assuming that the car does not skid and that the tires have radii of 0.37 m
The driver of a car traveling at 30.2 m/s applies the brakes and undergoes a constant deceleration of 1.4 m/s 2 . The car makes 139 revolutions.
A change in velocity that does not alter over time is referred to as a constant acceleration. A car's average acceleration stays constant at 20 mph per minute even if it increases its speed by 20 mph in one minute and another 20 mph the next.
Acceleration in the direction crosswise to the direction of the velocity is always referred to as deceleration. Deceleration always slows down motion. However, negative acceleration is just acceleration in the opposite direction according to the selected coordinate system.
Given:
v₀ = 30 m/s
v = 0 m/s
a = -1.4 m/s²
Find: Δx
v² = v₀² + 2aΔx
(0 m/s)
² = (30 m/s)
² + 2 (-1.4 m/s²) Δx
Δx = 321.43 m
The tires' circumference is 2 m plus 0.37 m, or 2.32 m. Therefore:
139 rev = 321.43 m (1 rev / 2.32 m)
To learn more about constant deceleration from given link
https://brainly.com/question/14442456
#SPJ4
i need help with this can give a heart or like if its right
The new electrostatic force between the charges, given that q₁ is reduced to 1/2q₁ and q₂ is tripped is 3/2Fₑ (Option C)
How do I determine the new electrostatic force?First, we shall determine the initial electrostatic force between the charges. Details below:
First Charge (q₁) = q₁second Charge (q₂) = q₂Electric constant (K) = KDistance apart (r) = rInitial electrostatic force (F) = Fₑ =?F = Kq₁q₂ / r²
Fₑ = Kq₁q₂ / r²
Finall, we shall determine the new electrostatic force. The is illustrated below:
First Charge (q₁) = 1/2q₁second Charge (q₂) = 3q₂Electric constant (K) = KDistance apart (r) = rNew electrostatic force (F) =?F = Kq₁q₂ / r²
F = (K × 1/2q₁ × 3q₂) / r²
F = 3/2Kq₁q₂ / r²
But,
Fₑ = Kq₁q₂ / r²
Thus
F = 3/2Fₑ
Thus, we can conclude that the new electrostatic force is 3/2Fₑ (Option C)
Learn more about force between charges:
https://brainly.com/question/28569085
#SPJ1
Diana raises a 1000 N piano using a set of pulleys. She use 250 N force to pulls in 20.0 m of rope. What is the distance
Using a set of pulleys, Diana hoists a piano weighing 1000 N. To draw in 20.0 m of rope, she applies 250 N of force. The separation is 5m.
given,
Load force = 1000 N
Effort distance = 20.0 m
Effort force=250N
If this were an ideal machine, we could calculate the force Diana applied as follows:
The equation that follows links load force to effort force for a perfect machine;
Effort force × effort distance = Load force × Load distance
When we enter the parameters into the formula, we get;
Load distance = Effort force × effort distance/Load force
=250×20/1000
= 5 m
Load distance = 5 m
In mechanics, force is any action that tends to maintain or alter the motion of a body or distort it. The concept of force is commonly explained in terms of Isaac Newton's three laws of motion, as stated in his Principia Mathematica (1687). Newton's first principle states that a body at rest or moving at a uniform rate in a straight line will remain in that state until some force is applied to it. The second law states that when an external force acts on a body, it causes an acceleration (change in velocity) of the body in the direction of the force.
Learn more about force here:
https://brainly.com/question/28875770
#SPJ4
When building a device or structure, engineers must carefully consider how the materials they choose will change when heated or cooled. List four situations where thermal expansion and contraction could be a problem.
There are three infrastructure projects wherein thermal expansion & contraction may be a problem are constructing roads, towers, and sidewalks.
What does thermal expansion mean?The propensity of matter to alter structure, volume, or area in reaction to a temperature change is known as thermal expansion. The average molecular energy of a substance has a monotonic relationship with temperature. Heat makes molecules move more quickly & take up more space, which causes thermal expansion.
What is a good illustration of thermal expansion?The expansion of heated air is the most obvious example. Heat helps the air expand, making it lighter than the air around it. This causes the hot air to be forced (upward), which causes steam and smoke to rise, warm air balloons to float, and so on.
To know more about thermal expansion visit :
https://brainly.com/question/14092908
#SPJ1
In a sealed container, Sarah combines a reactant with a mass of 8 grams with another reactant with a mass of 11 grams. After the reaction, what is the most reasonable prediction Sarah can make for the total mass of the products of this reaction?
6g
8g
10g
19g
which one
The most reasonable prediction Sarah can make for the total mass of the products of this reaction would be = 19g.
What is law of conservation of mass?The law of conservation of mass states that mass in neither created nor destroyed but can be changed from one form to another.
From the set up of the reaction carried out by Sarah, the container was in an enclosed medium.
Therefore since there is no loss of mass, the total mass of the products of this reaction would be = 11+8 = 19g.
Learn more about mass here:
https://brainly.com/question/28021242
#SPJ1
Athletes such as swimmers and bicyclists wear body suits in competition. Formulate a list of pros and cons of such suits.
There is a drag force that opposes a person's motion while they are moving through a fluid, whether it be air or liquid. Range of motion is constrained by the drag force. Drag force is overcome by the suits. The drawback is overheating.
A bodysuit's main function is to give you support and a seamless tuck-in so you may dress comfortably and easily. Bodysuits can be skin-tight or loose, and because of the tension they create from the shoulders to the crotch, they can embrace your curves and serve as the ideal foundation for whichever bottom you choose.
They can be warm and tight or very thin - useful for warmth - or even be very light (say, 60g), cooling underwear. They are typically elastic and stretchy. They can serve as both underwear and outerwear, but a pair of trousers, pants, or a skirt must be worn below.
Benefits include being thin, warm or cooling, extremely snug, occasionally shapewear, suitable for layering, and warm without bulk (you can get a big deal from a 60g torso garment). fitting in.
They interfere with using the restroom and can occasionally make it difficult to distinguish their front from back sides. Typically, the longer portion of the crotch, called the tail, is at the back. The bodysuits without arms, however, can also be worn buttoned up.
To learn more about Body suits from given link
https://brainly.com/question/10619818
#SPJ4
The number of pices of sausage needed by a pizza restaurant is given by the equation S= 21 n. In this equation, n is the number of pizzas the resturant will make. How many pieces of sausage are needed to make 55 pizzas? A. 34 B. 1155 C. 76 D. 855
The piece of sausage need to make 55 pizza is 21 × 55 = 1155.
How long does it take to make a pizza on average?The typical baking time for a pizza is 8 to 15 minutes, and larger, thicker pizzas bake more slowly than thin-crust, petite pizzas with few toppings. Just a friendly reminder: never lose sight of the pizza.
The two pizza rule is what?The "2 pizza rule" is a formula for determining how many people to invite to a gathering. Every meeting had to be small enough for two large pizzas to feed everyone, according to the rule.
To know more about pizzas visit :-
brainly.com/question/6530800
#SPJ4
A woman lifted a stack of books with a mass of 155 kg for 5.00 x 10^-2 min. She raised the stack
of books 150.0 cm. Calculate the Power the woman generates lifting the books.
The Power generated is 77.5 Watt
Power is always dependent on work done, so if a person does work at different rates his power also differs at different times. This is where the concept of average-power comes into the picture.We can define power as the rate of doing work, it is the work done in unit time. The SI unit of power is Watt (W) which is joules per second (J/s). Power is defined as the rate at which work is done upon an object. Power is a time-based quantity. Which is related to how fast a job is done. The formula for power is mentioned below.Power = Work / time
P = W / t
P = Fd/t
P = mgd/t
where, F = force = mg
d = displacement
t = time
Given, mass (m) = 155Kg
g = acceleration due to gravity = 10 m/s^2
d = 150 cm = 0.15 m
t = 5.00 x 10^-2 min = 3 seconds
Putting these values in above equation, we get P= 77.5 Watt.
To know more about power visit:
https://brainly.com/question/14777852
#SPJ1
What is the contribution of hydroelectric power in world electricity?
Hydroelectric power accounts for between 16 and 17 percent of global electricity production, making it one of the most significant renewable energy sources.
In 2016, hydropower contributed more than twice as much to the grid as the next largest renewable energy source, solar. Hydropower can provide many valuable services to the power grid beyond just energy generation. These include frequency regulation, voltage support, contingency reserves, load following, and black start service, all of which contribute to the reliability and safety of the power system. Hydropower's role in grid-scale energy storage, balancing services for other intermittent renewables like wind and solar power, and water management services by reservoirs are growing.
Want to know more about hydroelectric power visit the link which is given below;
https://brainly.com/question/15228003
#SPJ4
A rubber ball and a clay ball of equal mass are dropped from the same height and hit the ground. The clay ball sticks to the ground while the rubber ball rebounds. Which experiences the greater impulse from the ground
The rubber ball experiences the greater impulse from the ground, because the clay ball sticks to the ground and does not rebound. Impulse is equal to the change in momentum, and since the rubber ball rebounds and the clay ball does not, the rubber ball experiences a greater change in momentum and, therefore, a greater impulse from the ground.
The momentum of the rubber ball is also greater than that of the clay ball, because the rubber ball rebounds and the clay ball does not. Momentum is equal to the product of mass and velocity, and the rubber ball's velocity is greater than that of the clay ball due to its rebound. Therefore, the rubber ball has greater momentum than the clay ball.
Learn more about the momentum:
https://brainly.com/question/402617
#SPJ4
The Law of Conservation of Energy states: Energy cannot be created or destroyed; it can be transformed fr
one form to another but the total amount of energy never changes. Car crashes can involve huge amounts
of energy. How does the crashworthiness of the car affect the transfer and transformations of energy and
ultimately, protect the occupants?
The kinetic energy does the work that crushes the car’s crumple zones.
Conversion of collision energy Because the metal plastic deformation after the impact greatly increases the internal energy of the automobile, the majority of the kinetic energy in the collision process is turned into internal energy. Other types of kinetic energy are turned into heat energy, sound energy, and so on.
A serious vehicle accident can result in PTSD, acute anxiety, sadness, and crippling phobias. According to studies, crash-related mental traumas might have symptoms that continue up to a year following a car accident, especially in youngsters. Objects with potential energy, or stored energy, collide, and the energy transfers to kinetic energy, or the energy of an object in motion. This energy transfer from one to anotheanother
To learn more about Energy States to refer:
https://brainly.com/question/2289096
#SPJ1
9 An object of mass 1.2kg is moving with a velocity of 2.0m/s when it is acted on by a force of
4.0 N. The velocity of the object increases to 5.0 m/s.
For what period of time does the force act on the object?
Answer:
0.90 seconds
Explanation:
Given Info:
Object of mass ⇒ 1.2 kg
Velocity of 2.0m/s when it is acted on by a force of 4.0 N
Velocity of the object Increased to 5.0 m/s
Question:
For what period of time does the force act on the object?
Solve:
We first need to know the formula:
F = ma Or F = m(v-u)/t
F = force
m = mass of an object
a = acceleration
v = Final Velocity
u = Initial Velocity
a = Acceleration
t = Time Taken
Knowing that;
Force = 4.0 N
Mass of an object = 1.2 kg
Final velocity = 5.0m/s
Initial velocity = 2.0m/s
Time taken = [t]
Now lets plug it in the formula:
F = m(v-u)/t
4.0 = 1.2(5-2)/t
t = 0.90 seconds.
Hence, period of time at which force is acted on the object is 0.90 sec.
RevyBreeze
5. Is the motion of the stars around Polaris (NCP) due to the __________rotation (daily motion) or ___________revolution (yearly motion) of Earth
The motion of the stars around Polaris (NCP) is due to rotation (daily motion) of Earth.
Polaris is a star in Ursa Minor's northern circumpolar constellation. It is known as Ursae Minoris and is also known as the North Star or Pole Star. With an apparent brightness of roughly 1.98, it is the brightest star in the constellation and may be seen with the bare eyes at night. The star's location is less than one degree from the north celestial pole, making it the current northern pole star. The star's constant location in the Northern Sky makes it ideal for navigation.
Its distance is considered as part of the cosmic distance ladder since it is the nearest Cepheid variable. The updated Hipparcos stellar parallax distance to Polaris is approximately 433 light-years (133 parsecs), whereas the successor mission Gaia distance is around 448 light-years (137 parsecs). Other techniques of calculation produce significantly disparate results.
To learn more about Polaris, here
https://brainly.com/question/29036362
#SPJ4
Albert pushes a 6 kg 6 kg box across a level floor. He pushes with a force of 43 N 43 N and observes that the box accelerates in the direction of his push at a rate of 2 m/s22 m/s2 . What is the net force acting on the box
The net force acting on the box, and the frictional force acting backward is 25 N
Calculation:Here,
mass ,m = 12 Kg
F1 = 49 N
a = 2 m/s^2
Using the second law of motion
net force on the particle = m * a
net force on the particle = 12 * 2
the net force on the particle = 24 N
let the frictional force is f
F1 - f = Fnet
49 - f = 24
f = 25 N
How can you determine the total force exerted on an object?The vector sum of all forces acting on an object is known as the net force. As a result of the fact that a force is a vector and that two forces with identical magnitudes and opposing directions cancel each other out, the net force is the sum of all the forces, or put another way, the net force is the sum of all the forces.
to know more about net force here:
brainly.com/question/29261584
#SPJ4