The given statement "If ebit doubles when sales doubles, then the firm's degree of operating leverage must be exactly two" is false because the degree of operating leverage (DOL) is a measure of how sensitive a company's operating income is to changes in sales revenue.
It is calculated by dividing the percentage change in operating income by the percentage change in sales revenue. If EBIT (earnings before interest and taxes) doubles when sales double, it means that the company has a DOL of 2. This is because the percentage change in operating income is the same as the percentage change in sales revenue. However, if the DOL is exactly two, it does not necessarily mean that EBIT will double when sales double.
For example, if a company's DOL is 3, it means that for every 1% increase in sales revenue, the operating income will increase by 3%. Therefore, if sales double, the operating income will increase by 200%, not just 100% as in the scenario given in the question.
In conclusion, while a DOL of 2 may result in a doubling of EBIT when sales double, it is not the only possible scenario. The actual DOL of a company can vary depending on its cost structure and operating leverage.
For more about operating leverage:
https://brainly.com/question/29690696
#SPJ11
Throughout history, most managers operated on a trial-and-error basis. During the Industrial Revolution in the 18th and 19th centuries, major advances in manufacturing and transportation technologies occurred, such as the steam engine, cotton gin, and railway networks. And with the availability of large numbers of low- skilled laborers, businesses and factories grew in size, becoming more complex to operate. Managers who made minor improvements in management tactics were a. unable to achieve mass production. b. not able to bring about increases in production quality. c. able to achieve impressive increases in production quantity and quality. d. able to hasten the emergence of management as an informal art. e. unable to achieve economies of scale.
During the Industrial Revolution, major advancements in manufacturing and transportation technologies such as the steam engine, cotton gin, and railway networks allowed for businesses and factories to grow in size and complexity.
With large numbers of low-skilled laborers available, managers who made minor improvements in management tactics were able to achieve impressive increases in production quantity and quality. This was due to the ability to streamline processes and implement new techniques that allowed for mass production. The emergence of management as an informal art was also hastened during this time, as managers needed to develop new strategies to manage the increased size and complexity of their operations. Overall, the Industrial Revolution had a significant impact on production quality and quantity, allowing for the development of economies of scale that continue to influence business practices today.
During the Industrial Revolution, managers who made minor improvements in management tactics were c. able to achieve impressive increases in production quantity and quality. This was due to the advancements in manufacturing and transportation technologies, such as steam engines, cotton gins, and railway networks, which facilitated increased production and improved operations.
learn more about Industrial Revolution here:
https://brainly.com/question/855594
#SPJ11
what experience led you to explore a career in long/short investing?
We can say that long or short investing demands analyzing financial statements to make judgments about a company's performance.
It´s necessary an accurate analysis and the impact it could have on the success of an investment.
For investing is also needed predicting market demand and making decisions based on economic trends. With that opportunity to adapt the strategies to changing market conditions.
For thar reason, all this work required a high level of judgment and attention to detail, as well as the ability to navigate complex financial instruments.
in conclusion, while there is always the risk of error in any investment, you must felt confident in your ability to make informed decisions and manage risks effectively.
Learn more about investing: https://brainly.com/question/31411302
#SPJ11
the keynesian model of aggregate demand includes:l.government purchases and taxes. ll.consumer spending and investment spending.lll. exports plus imports.
The Keynesian model of aggregate demand includes government purchases and taxes, consumer spending and investment spending, and exports plus imports.
The model was developed by economist John Maynard Keynes and is based on the idea that government intervention can stimulate economic growth and prevent recessions. In this model, government spending is used to boost aggregate demand, while taxes are used to regulate it.
Consumer and investment spending are also important components, as they drive demand for goods and services. Finally, the inclusion of exports and imports in the model recognizes the importance of international trade in economic growth.
Overall, the Keynesian model emphasizes the importance of government action in maintaining a stable and growing economy.
To know more about Keynesian model, visit:
https://brainly.com/question/29996785#
#SPJ11
The Keynesian model of aggregate demand includes government purchases and taxes, consumer spending and investment spending, and exports plus imports.
The model was developed by economist John Maynard Keynes and is based on the idea that government intervention can stimulate economic growth and prevent recessions. In this model, government spending is used to boost aggregate demand, while taxes are used to regulate it.
Consumer and investment spending are also important components, as they drive demand for goods and services. Finally, the inclusion of exports and imports in the model recognizes the importance of international trade in economic growth.
Overall, the Keynesian model emphasizes the importance of government action in maintaining a stable and growing economy.
To know more about Keynesian model, visit:
https://brainly.com/question/29996785#
#SPJ11
T/F overfitting is the tendency of data mining procedures to tailor models to thr training data; at the expense of generalization to previously unseen data points.
True. Overfitting is a common problem in data mining and machine learning, where a model is trained too well on the training data,
making it fit the data too closely and becoming overly complex. This results in the model losing its ability to generalize to new, unseen data points. The model becomes tailored to the training data, and its performance on new data points may be poor, leading to inaccurate predictions or classifications. Therefore, overfitting is the tendency of data mining procedures to tailor models to the training data at the expense of generalization to previously unseen data points.
Learn more about Overfitting here:
https://brainly.com/question/28198778
#SPJ11
if the current ni is at 2100 and full employment level in the economy is at $4000, by how much should government expenditures increase? (if mpc = 0.8)
The government expenditures should increase by $380 to achieve the full employment level in the economy.
To determine how much the government expenditures should increase to reach full employment, we need to calculate the spending multiplier and the spending gap.
The spending multiplier is calculated as follows:
Spending Multiplier = 1 / (1 - MPC)
Here, MPC (marginal propensity to consume) = 0.8.
Spending Multiplier = 1 / (1 - 0.8) = 1 / 0.2 = 5
Now, we need to find the spending gap between the current national income (NI) and the full employment level:
Spending Gap = Full Employment Level - Current NI
Spending Gap = $4,000 - $2,100 = $1,900
Finally, we calculate the required increase in government expenditure:
Increase in Government Expenditure = Spending Gap / Spending Multiplier
Increase in Government Expenditure = $1,900 / 5 = $380
So, Increase in Government Expenditure is $380.
To learn more about "expenditure", visit: https://brainly.com/question/935872
#SPJ11
explain why the minimum annual temperature does not occur at the same time as the minimum annual insolation receipt.
The minimum yearly temperature and minimum annual insolation receipt do not occur simultaneously. This is due to the fact that the solar insolation that the planet receives does not immediately heat the atmosphere.
Instead, it is first absorbed by the land, water bodies, and biotic life. Then, they put it to use by performing biotic processes like photosynthesis as well as work as winds and currents. After that, these land and sea masses release these sun rays back into space as long wave radiations.
Global warming is brought on by the air particles' absorption of these long-wave radiations that are being emitted, not by solar radiation pouring in. It takes a while to complete this Process. As a result, the yearly temperature does not reach its minimum during periods of minimum insolation; it does so after a few days.
To learn more about temperature, visit:
https://brainly.com/question/11464844
#SPJ4
Which of these items would be most likely to be made with a fixed-position layout? a. a large, ocean-going cruise ship b. pomegranate sauce c. a computer chip d. toothpaste e. all of these
Option A) "a large, ocean-going cruise ship" would be most likely to be made with a fixed-position layout.
In this type of layout, the product is too large, heavy, or complex to be moved easily, so the materials, equipment, and labor are brought to the product. Examples include ships, aircraft, buildings, and large machinery. The other items listed, such as pomegranate sauce, computer chips, and toothpaste, are typically made with a process layout or a product layout, where the materials and equipment move through a sequence of workstations.
Option A is answer.
You can learn more about fixed-position layout at
https://brainly.com/question/31439534
#SPJ11
Total gross sales for the period include the following: Sales returns related to sales on account were
$650
. All returns were made before payment. One-half of the remaining sales on account were paid within the discount period. The company treats all discounts and returns as contra-revenues. What amount will be reported on the income statement as net sales? Note: Do not round intermediate calculations. Round your answer to 2 decimal places.
The amount reported on the income statement as net sales is $34,350.00.
To calculate net sales, we need to follow these steps:
1. Start with the total gross sales amount given in the question.
2. Subtract sales returns ($650) since they are contra-revenues.
3. Determine the amount of sales on account after returns.
4. Calculate the discount amount for the half of sales paid within the discount period.
5. Subtract the discount amount from the sales on account.
6. Combine the results of steps 3 and 5 to arrive at net sales.
The question does not provide the total gross sales, the remaining sales on account after returns, or the discount rate. Therefore, it is impossible to provide a specific answer to the question without more information. Please provide the missing information for a more accurate calculation.
To know more about income statement click on below link:
https://brainly.com/question/28035395#
#SPJ11
Kim's Asphalt does driveway and parking lot resurfacing work for large commercial clients as well as small residential clients. An inventory of materials and equipment is on hand at all times so that work can start as quickly as possible. Special equipment is ordered as required. On May 1, the Materials and Equipment Inventory account had a balance of $36,000. The Work-in-Process Inventory account is maintained to record costs of work not yet complete. There were two such jobs on May 1 with the following costs.
Based on the information provided, it seems that Kim's Asphalt has a well-maintained inventory of materials and equipment, allowing them to start work promptly. As of May 1, the Materials and Equipment Inventory account had a balance of $36,000.
In addition to materials and equipment, Kim's Asphalt also maintains a Work-in-Process Inventory account to record costs of work not yet complete. On May 1, there were two such jobs with the following costs:
- Job 1: $7,500
- Job 2: $12,000
These costs will be recorded in the Work-in-Process Inventory account until the jobs are completed and the costs can be transferred to the Finished Goods Inventory or Cost of Goods Sold accounts.
To know more about inventory refer here:
https://brainly.com/question/14184995#
#SPJ11
The average days' sales in inventory for the ice cream industry is 12 days. How does Frank's Ice Cream compare to the industry? O A. Not enough information to determine the number of days' sales in inventory. OB. Frank's Ice Cream is taking more days to sell its inventory than the industry average OC. Frank's Ice Cream is selling its inventory in the same number of days as the industry average. OD. Frank's Ice Cream is selling its inventory in fewer days than the industry average.
Without knowing the specific number of days' sales in inventory for Frank's Ice Cream, it is impossible to determine the exact comparison.
However, based on the given information, we can make an educated guess. If Frank's Ice Cream is taking more than 12 days to sell its inventory, then option B is correct. If Frank's Ice Cream is selling its inventory in the same number of days as the industry average, then option C is correct. If Frank's Ice Cream is selling its inventory in fewer than 12 days, then option D is correct. Option A is not applicable as we do have information about the industry's average days' sales in inventory.
Tol earn more about "sales", visit: https://brainly.com/question/25743891
#SPJ11
Campbell’s Soup is often consumed when people feel sick, have colds, or get the flu. What is the consumer behavior implication of this?
a. Campbell’s soup can become very successful if everyone falls ill.
b. Campbell’s soup can be typecast because of the strong problem-solution association.
c. Campbell’s soup is ignoring the difference between the actual self and the desired self.
d. Campbell’s soup is in danger of being attacked by pharmaceutical companies.
e. Campbell’s soup can satisfy unfulfilled needs by segmenting the market based on disease carriers.
The consumer behavior implication of Campbell’s Soup being consumed when people feel sick, have colds, or get the flu is that it can create a strong problem-solution association.
Campbell’s Soup has the potential to become a staple in many households, as people tend to reach for it when they need comfort and relief from their symptoms.
By segmenting the market based on disease carriers, they can identify unfulfilled needs and satisfy them. This could potentially lead to more sales and a stronger brand loyalty.
However, in doing this, they may risk being typecast as a ‘sick brand’ and could be attacked by pharmaceutical companies. Campbell’s Soup needs to be careful in how it positions itself and its products in the market to ensure that it does not become associated with sickness, but rather with comfort and health.
Know more about pharmaceutical here
https://brainly.com/question/16582232#
#SPJ11
7. XYZ Co. has forecasted June sales of 600 units and July sales of 1000 units. The company maintains ending inventory equal to 125% of next month's sales. June beginning inventory reflects this policy. What is June's required production?
A. 1,100 units
B. -0- units
C. 500 units
D. 400 units
the correct answer is B, 0 units.XYZ Co. has forecasted June sales of 600 units and July sales of 1000 units. The company maintains ending inventory equal to 125% of next month's sales. June beginning inventory reflects this policy.
To calculate the required production for June, we need to determine the amount of units that will be sold in July since ending inventory for June is 125% of next month's sales. Therefore, ending inventory for June would be 125% x 1,000 = 1,250 units.
To determine June's required production, we need to take into account the change in inventory levels. Beginning inventory reflects the ending inventory of the previous month, which in this case is the 1,250 units that will be carried over from June to July. Therefore, the total units available for sale in June would be beginning inventory (1,250 units) plus June's sales (600 units), which equals 1,850 units.
To calculate June's required production, we subtract the total units available for sale in June (1,850 units) from the desired ending inventory for June (1,250 units). The difference represents the required production for June, which is 1,250 units - 1,850 units = -600 units.
However, since the required production cannot be negative, the answer is 0 units, which means that no production is required in June.
Learn more about inventory here:
https://brainly.com/question/14184995
#SPJ11
a formal statement of a company’s plans in dollars is a: a) variance report. b) position statement. c) budget. d) prospectus. e) variance analysis.
A company's goals for a particular time period are formally stated in a budget, which often includes predicted revenue as well as costs to meet specific objectives.
What do you mean by budget?While a policy paper and presentation refer to various financial documents used in corporate operations, a variance report or variance analysis compare real outcomes to the planned amounts.
A spending plan determined by revenue and costs is called a budget. In other words, it's a projection of your income and expenses for a specific time frame, like a month or a year. (Or, if you're keeping track of the money coming in and going out of your home as a whole, that's a household budget.
To know more about budget visit:
https://brainly.com/question/15683430
#SPJ1
Suppose Apple has beta_Market = 1, beta_SMB = -0.5. = The average excess return on Apple is 2.5%. The average excess return on the market is 5%. E[R_SMB] = 2% E[R_HML] = 3% Then according to the Fama-French 3-factor model, Apple has a beta_HML = __ (answer with one decimal, e.g., 0.1) A/
Assuming R_f is the risk-free rate, we can't solve for β_HML without knowing R_f. However, if you have the risk-free rate value, you can plug it into the equation to find the β_HML value with one decimal precision.
According to the Fama-French 3-factor model, the average excess return on Apple can be expressed as:
E[R_Apple] = R_f + β_Market * E[R_Market] + β_SMB * E[R_SMB] + β_HML * E[R_HML]
Given the provided information, we have:
2.5% = R_f + 1 * 5% - 0.5 * 2% + β_HML * 3%
To solve for β_HML, rearrange the equation:
β_HML = (2.5% - R_f - 5% + 0.5 * 2%) / 3%
Assuming R_f is the risk-free rate, we can't solve for β_HML without knowing R_f. However, if you have the risk-free rate value, you can plug it into the equation to find the β_HML value with one decimal precision.
Learn more about decimal precision here
https://brainly.com/question/18722164
#SPJ11
assume a firm closes down in the short run and produces no output. under these conditions:
A Variable cost are zero and fixed cost are positive
B variable cost are zero and fixed cost are zero
C variable cost are positive and fixed cost are positive
D variable costs are positive and fix cost are zero
If a firm closes down in the short run and produces no output, under these conditions, the correct answer is:
A) Variable costs are zero and fixed costs are positive.
This is because variable costs depend on the level of production, so if no output is being produced, there will be no variable costs. However, fixed costs, such as rent, salaries, or utility bills, will still be incurred even if the firm is not producing any output, making them positive.
To know more about firm refer here:
https://brainly.com/question/29840644#
#SPJ11
If a country sees a decrease in income and wealth, we would expect
A. savings to decrease.
B. savings to increase.
C. interest rates to fall.
D. inflation to rise.
E. people to have a positive rate of time preference.
None of the other choices (interest rates, inflation, and temporal preferences) are correlated with variations in wealth and income.
If a country sees a decrease in income and wealth, we would expect savings to decrease. This is because when people have less income and wealth, they have less money available to save. The decrease in savings may also contribute to a decrease in investment, which can further impact the country's economy. None of the other options listed (interest rates, inflation, time preference) are directly related to changes in income and wealth. Inflation is the term used to describe a long-term, consistent increase in the average level of prices for goods and services. The implication is that more money is needed to buy the same quantity of goods and services as money's purchasing power decreases.
To learn more about inflation refer here:
https://brainly.com/question/30112292
#SPJ11
a city levied propety taxes of $5,010,000 for its General Fund and it offered a 1 percent discount for payment within the discount period. Based on experience, city finance officials estimated that $10,000 of discounts would be taken. However, when the discount period ended, $5,002,000 of cash had been collected and only $8,000 of discounts had been taken.
What is the amount of property tax revenue that the city should record?
a. $5,002,000
b. $5,010,000
c. $5,000,000
d. $5,008,000
The amount of property tax revenue that the city should record is $5,008,000.
The total amount of property taxes levied for the General Fund is $5,010,000. However, the city offered a 1% discount for payment within the discount period, which means that the actual amount to be collected would be $5,010,000 - $10,000 = $5,000,000.
At the end of the discount period, the city collected $5,002,000 in cash, which means that $5,000,000 - $5,002,000 = $-2,000 in uncollected taxes. However, only $8,000 of discounts were taken, which means that the remaining $2,000 was not due to discounts but rather to uncollected taxes.
Therefore, the amount of property tax revenue that the city should record is $5,010,000 - $2,000 = $5,008,000
to know more about discount period pls visit :
https://brainly.com/question/30319483
#SPJ11.
Which of the following statements is true? A. Total pay is divided into pay and incentives. B. Hourly wage and piecework system are forms of incentives. C. Salary is inclusive of compensation for overtime work. D. Fringe benefits, health benefits, and 401(k) plans are a part of one's salary.
E. Pay is the hourly, weekly, or monthly salary an employee earns.
The true statement is E. Pay refers to the hourly, weekly, or monthly salary an employee earns. Incentives and overtime work may also be added to the total pay, but they are separate from the base pay.
The true statement is E. Pay refers to the hourly, weekly, or monthly salary an employee earns. Incentives and overtime work may also be added to the total pay, but they are separate from the base pay. Hourly wage and piecework system are examples of incentive-based pay, while salary is a fixed amount paid regardless of overtime work. Fringe benefits, health benefits, and 401(k) plans are additional benefits that may be included in an employee's compensation package, but they are not considered part of their salary.
Learn more about Incentives and overtime here
https://brainly.com/question/30331538
#SPJ11
If your building a 10,000 sq ft restaurant how much woult the utilities cost each month if your in san antonio, texas. please do your research to find out how much gas, electric, water, trash and internet would cost.
business transactions include two types. indicate whether the following transactions are external or internal events.
From the given business transactions, internal event are using equipment over several years (option 1) and using up insurance paid in advance (option 4).
The external event are investment of cash in the business by the owners (option 2), borrowing cash from a bank (option 3), purchase of equipment (option 5), and sale of merchandise to customers (option 6).
Business transactions can be classified into two types: external and internal events.
The classification for each of the transactions provided is as follows:
1. Using equipment over several years - Internal event:
This is an internal event because it does not involve any outside parties or entities. It is a regular part of the business operations and does not involve any exchange of goods or services.
2. Investment of cash in the business by the owners - External event:
This transaction involves the owners of the business, who are considered separate entities from the business itself. Hence, it cash investment from the owner is considered a outside party activity.
3. Borrowing cash from a bank - External event:
This is an external event because it involves the business receiving funds from an outside entity, in this case, a bank. The business is exchanging a promise to repay the loan with the bank's money.
4. Using up insurance paid in advance - Internal event:
This is an internal event because it does not involve any outside parties or entities. It is a regular part of the business operations and does not involve any exchange of goods or services.
5. Purchase of equipment - External event:
This is an external event because it involves the business purchasing goods from an outside entity, in this case, equipment from a supplier. The business is exchanging money for the equipment.
6. Sale of merchandise to customers - External event:
This is an external event because it involves the business selling goods to outside parties or entities, in this case, customers. The business is exchanging goods for money.
To summarize, transactions 1 and 4 are internal events, while transactions 2, 3, 5, and 6 are external events.
Note: The question is incomplete. The complete question probably is: Business transactions include two types. Indicate whether the following transactions are external or internal events: 1.Using equipment over several years 2. Investment of cash in the business by the owners 3. Borrowing cash from a bank 4. Using up insurance paid in advance 5. Purchase of equipment 6. Sale of merchandise to customers.
Learn more about Business transactions:
https://brainly.com/question/30366565
#SPJ11
suppose your town of 50,000 people has just approved construction of a landfill nearby. Estimates are that it will accommodate 1million tons of MSW. Assuming your town's residents generates 1861 lbs of waste each per year, how many years will the landfill accept waste before filling up?
The landfill will accept waste for approximately 21.5 years before filling up, assuming the town's residents continue to generate waste at the current rate.
If the landfill can accommodate 1 million tons of MSW, we need to convert that to pounds, which is 2 billion pounds (since 1 ton = 2,000 pounds).
Next, we need to find out how much waste the town's residents generate each year. We can do this by multiplying the number of residents (50,000) by the amount of waste generated per person per year (1861 lbs).
50,000 x 1861 = 93,050,000 lbs of waste generated by the town's residents each year.
Now we can divide the total capacity of the landfill (2 billion pounds) by the amount of waste generated by the town's residents each year (93,050,000 lbs) to find out how many years the landfill will accept waste before filling up.
2,000,000,000 / 93,050,000 = 21.5 years (rounded to the nearest half year).
Therefore, the landfill will accept waste for approximately 21.5 years before filling up, assuming the town's residents continue to generate waste at the current rate.
Learn more about town's residents here
https://brainly.com/question/13639653
#SPJ11
If a price-taking firm's production function is given by q=2√l=2, its supply function is given by:
a. q=2pw
b. q=p/w
c. q=2p/e
d. q=p/2w
The supply function for a price-taking firm with a production function given by q = 2√l = 2, would be option b. q=p/w.
1. Start with the production function:
q = 2√l
2. Solve for l:
l = (q/2)^2
Now, we need to find the cost function (C), which shows the relationship between the total cost and the number of goods produced. Assuming the firm pays a wage rate (w) for labor:
3. The cost function is:
C = wl
4. Substitute the expression for l from step 2:
C = w((q/2)^2)
Next, calculate the marginal cost (MC) by finding the derivative of the cost function concerning q:
5. MC = dC/dq = 2w(q/2)
Since the firm is a price taker, its supply function is given by the condition where the marginal cost is equal to the market price (p):
6. Set MC = p:
2w(q/2) = p
7. Solve for q:
q = p/w
So, the supply function for this price-taking firm is given by option b: q = p/w.
Learn more about production function :- https://brainly.com/question/13564389
#SPJ11
Kubin Company’s relevant range of production is 20,000 to 23,000 units. When it produces and sells 21,500 units, its average costs per unit are as follows:
Amount per Unit Direct materials $ 8.00 Direct labor $ 5.00 Variable manufacturing overhead $ 2.50 Fixed manufacturing overhead $ 4.00 Fixed selling expense $ 4.50 Fixed administrative expense $ 3.50 Sales commissions $ 2.00 Variable administrative expense $ 1.50 Required:
1. If 20,000 units are produced and sold, what is the variable cost per unit produced and sold?
2. If 23,000 units are produced and sold, what is the variable cost per unit produced and sold?
3. If 20,000 units are produced and sold, what is the total amount of variable cost related to the units produced and sold?
4. If 23,000 units are produced and sold, what is the total amount of variable cost related to the units produced and sold?
5. If 20,000 units are produced, what is the average fixed manufacturing cost per unit produced?
6. If 23,000 units are produced, what is the average fixed manufacturing cost per unit produced?
7. If 20,000 units are produced, what is the total amount of fixed manufacturing overhead incurred to support this level of production?
8. If 23,000 units are produced, what is the total amount of fixed manufacturing overhead incurred to support this level of production?
The total amount of fixed manufacturing overhead incurred to support the production of 23,000 units is 23,000 units * $4 per unit = $92,000.
The variable cost per unit produced and sold would be $15.00 ($8.00 for direct materials, $5.00 for direct labor, and $2.50 for variable manufacturing overhead).
2. The variable cost per unit produced and sold would still be $15.00 ($8.00 for direct materials, $5.00 for direct labor, and $2.50 for variable manufacturing overhead) as it is within the relevant range.
3. If 20,000 units are produced and sold, the total amount of variable cost related to the units produced and sold would be $300,000 ($15.00 per unit x 20,000 units).
4. If 23,000 units are produced and sold, the total amount of variable cost related to the units produced and sold would be $345,000 ($15.00 per unit x 23,000 units).
5. If 20,000 units are produced, the average fixed manufacturing cost per unit produced would be $4.50 ($4.00 for fixed manufacturing overhead and $0.50 for fixed administrative expense) as fixed costs are spread over a smaller number of units.
6. If 23,000 units are produced, the average fixed manufacturing cost per unit produced would be $3.50 ($4.00 for fixed manufacturing overhead and $0.50 for fixed administrative expense) as fixed costs are spread over a larger number of units.
7. If 20,000 units are produced, the total amount of fixed manufacturing overhead incurred to support this level of production would be $90,000 ($4.00 for fixed manufacturing overhead x 20,000 units).
8. If 23,000 units are produced, the total amount of fixed manufacturing overhead incurred to support this level of production would be $92,000 ($4.00 for fixed manufacturing overhead x 23,000 units).
To know more about variable cost per unit
https://brainly.com/question/27853679
#SPJ11
Determine the maturity date and compute interest for each note. (Use 360 days a year. Do not round intermediate calculations.)
Note Contract
Date Principal Interest
Rate Period of Note
(Term)
1. March 21 $ 30,000 7 % 60 days
2. May 13 35,000 10 90 days
3. October 22 20,000 4 45 days
Note 1 matures on May 20 with an interest of $350.
Note 2 matures on August 11 with an interest of $875.
Note 3 matures on December 6 with an interest of $100.
To determine the maturity date and compute the interest for each note:
1. Note 1:
Contract Date: March 21
Principal: $30,000
Interest Rate: 7%
Period of Note (Term): 60 days
Maturity Date: March 21 + 60 days = May 20
Interest: ($30,000 x 7% x 60 days) / 360 days = $350
2. Note 2:
Contract Date: May 13
Principal: $35,000
Interest Rate: 10%
Period of Note (Term): 90 days
Maturity Date: May 13 + 90 days = August 11
Interest: ($35,000 x 10% x 90 days) / 360 days = $875
3. Note 3:
Contract Date: October 22
Principal: $20,000
Interest Rate: 4%
Period of Note (Term): 45 days
Maturity Date: October 22 + 45 days = December 6
Interest: ($20,000 x 4% x 45 days) / 360 days = $100
In summary:
Note 1 matures on May 20 with an interest of $350.
Note 2 matures on August 11 with an interest of $875.
Note 3 matures on December 6 with an interest of $100.
To learn more about contract, refer below:
https://brainly.com/question/2669219
#SPJ11
macroeconomics entails the study of the:question 1 options:a) cost and production decisions by firms.b) individual decision makers.c) overall behavior of the economy.d) market structures.
Macroeconomics policies is a branch of economics that deals with the behavior of the economy as a whole. It focuses on analyzing the aggregate performance of the economy by examining variables such as GDP.
These variables are used to understand how changes in government policies, international trade, and financial markets can affect the overall behavior of the economy. One of the primary objectives of macroeconomics is to achieve economic growth and stability. Economic growth refers to the increase in the total output of goods and services in an economy over time, while stability refers to the absence of excessive volatility in key economic variables such as inflation and unemployment. Macroeconomic policies, such as fiscal and monetary policies, are used to promote economic growth and stability.
Fiscal policy involves government spending and taxation policies that can influence the level of economic activity. The government can increase spending and cut taxes during a recession to stimulate economic growth and decrease spending and raise taxes during a period of inflation to cool down the economy.
To learn more Macroeconomic policies, visit here
https://brainly.com/question/30044582
#SPJ4
Macroeconomics policies is a branch of economics that deals with the behavior of the economy as a whole. It focuses on analyzing the aggregate performance of the economy by examining variables such as GDP.
These variables are used to understand how changes in government policies, international trade, and financial markets can affect the overall behavior of the economy. One of the primary objectives of macroeconomics is to achieve economic growth and stability. Economic growth refers to the increase in the total output of goods and services in an economy over time, while stability refers to the absence of excessive volatility in key economic variables such as inflation and unemployment. Macroeconomic policies, such as fiscal and monetary policies, are used to promote economic growth and stability.
Fiscal policy involves government spending and taxation policies that can influence the level of economic activity. The government can increase spending and cut taxes during a recession to stimulate economic growth and decrease spending and raise taxes during a period of inflation to cool down the economy.
To learn more Macroeconomic policies, visit here
https://brainly.com/question/30044582
#SPJ4
When a normal position is selected (vs a templet position), which two fields auto-populate with the corresponding details associated with that position?
When a normal position is selected, the "Job Title" and "Department" fields usually auto-populate with the corresponding details associated with that position.
This is because the job title and department are important pieces of information that are often associated with a particular position. The job title field usually contains the specific name or title of the position, while the department field indicates the department or team that the position is a part of.
Auto-populating these fields can save time and reduce errors, as it ensures that the correct information is entered for each position. However, it's important to double-check these fields and make any necessary changes or updates to ensure accuracy.
To learn more about job title click here
brainly.com/question/12174315
#SPJ11
A $10,000 mortgage bond that is due in 20 years pays interest of $250 every 6 months. The bond rate is closest to
2.5% per year, payable quarterly
5.0% per year, payable quarterly
5% per year, payable semiannually
10% per year, payable quarterly
To determine the bond rate of a $10,000 mortgage bond that is due in 20 years and pays interest of $250 every 6 months, we'll consider the given options and analyze the interest payment frequency and the annual percentage.
1. 2.5% per year, payable quarterly:
Interest payment for 6 months = ($10,000 * 2.5%)/2 = $125 (This doesn't match the given $250 interest payment)
2. 5.0% per year, payable quarterly:
Interest payment for 6 months = ($10,000 * 5%)/2 = $250 (This matches the given $250 interest payment)
3. 5% per year, payable semiannually:
Interest payment for 6 months = $10,000 * 5% = $500 (This doesn't match the given $250 interest payment)
4. 10% per year, payable quarterly:
Interest payment for 6 months = ($10,000 * 10%)/2 = $500 (This doesn't match the given $250 interest payment)
Based on our analysis, the bond rate is closest to 5.0% per year, payable quarterly.
to know more about the mortgage bond:
https://brainly.com/question/31113838
#SPJ11
This distribution center function allows a firm to pick goods by the pallet, by the case, or by the individual piece.
Multiple Choice
product allocation
product accumulation
product sortation
product assortment
product selection
"Product sortation" is the solution. The distribution center function of product sortation enables a business to choose products by the pallet, by the case, or by the individual piece.
Which alludes to distribution centers from which products are sent straight to customers?Orders for tangible goods are packaged and distributed to customers from fulfillment centers, which are warehouse facilities.
What is the name of direct shipping?Bypassing a physical store or warehouse, direct shipment is a form of fulfillment in which goods are sent from the supplier to the customer directly. Dropshipping, in which products are offered online by a third-party merchant and shipped by the supplier, is different from shipping directly.
To know more about business visit:
https://brainly.com/question/15826604
#SPJ1
how does the introduction of automation single out certain subpopulations when it comes to securing and holding a job?
The introduction of automation can have a significant impact on certain subpopulations in terms of securing and holding a job. While automation can lead to increased productivity and efficiency, it can also replace certain job positions that were previously done by humans. This often affects lower-skilled workers who perform repetitive tasks, as these can be easily automated.
Furthermore, the cost of implementing automation technology can be high, which means that smaller businesses may struggle to keep up with larger competitors who can afford to invest in automation. This can lead to job loss for workers in smaller businesses who are unable to compete with larger ones.
In addition, certain subpopulations such as the elderly and those with disabilities may struggle to adapt to new technologies and may find it difficult to secure and hold a job in an increasingly automated workforce. It is important for companies to consider the impact of automation on these vulnerable populations and to implement measures to ensure that they are not left behind in the job market.
To learn more about "automation", visit: https://brainly.com/question/30088157
#SPJ11
suppose the economy is in an sras-induced recession. use the ad/as model to illustrate and discuss the impact on inflation and real gdp, in the short run and long run.
If the economy is in an SRAS-induced recession, it means that there has been a decrease in aggregate supply, which has led to a decrease in real GDP and an increase in inflation.
To illustrate this using the AD/AS model, we can assume that the aggregate demand curve (AD) is relatively stable while the short-run aggregate supply curve (SRAS) shifts to the left, leading to a decrease in output and an increase in prices.
In the short run, the decrease in output and increase in prices will create a stagflationary environment where the economy is experiencing both high unemployment and inflation. This is because firms are producing less due to the decrease in supply, which leads to a decrease in employment and wages. At the same time, the decrease in supply increases the cost of production, leading to higher prices for goods and services.
However, in the long run, the economy will adjust to this new equilibrium point. As wages decrease and unemployment rises, labor becomes cheaper and firms can produce more goods and services at a lower cost, leading to an increase in aggregate supply. This causes the SRAS curve to shift to the right, which increases output and decreases prices. As the economy adjusts to the new equilibrium point, inflation will decrease and real GDP will increase, resulting in a more stable economic environment.
Overall, an SRAS-induced recession can have a significant impact on the economy in the short run, leading to stagflation and high unemployment. However, in the long run, the economy will adjust to the new equilibrium point, leading to an increase in output and a decrease in prices.
You can learn more about AD/AS model at: brainly.com/question/13846177
#SPJ11