Answer:
Wind, water, gravity, and ice
Explanation:
Water can erode soil material. Especially if the soil is bare, dry and erodible erosion via rain particles can occur. Wind is another factor that cause soil erosion. Dry soil particles( Especially if they are fine) can move to other areas if wind exists. Ice is another issue on erosion. Ice, when it is melting, can carry soil particles.
Write the half-reaction for ribose conversion to CO2. Is it an oxidation- or reduction- half reaction
Answer:
[tex]5H_2O+C_5H_{10}O_5\rightarrow 5CO_2+20H^++20e^-[/tex]
Explanation:
Hello.
In this case, when ribose (C₅H₁₀O₅) yields carbon dioxide (CO₂) we write:
[tex]C_5H_{10}O_5\rightarrow CO_2[/tex]
Which needs to be balanced by adding water and hydrogen ions:
[tex]5H_2O+C_5H_{10}O_5\rightarrow 5CO_2+20H^++20e^-[/tex]
You can also see that there are 20 transferred electrons, since the carbon atoms in the ribose have 0 as their oxidation state and the carbon atoms in the carbon dioxide have +4 as the oxidation state, thus, each carbon transfers 4 electrons, a five carbon atoms transfer 20 electrons overall.
In such a way, since the carbon is increasing its oxidation state, such half reaction is an oxidation half reaction.
Best regards.
A boiling pot of soup with a lid on it to keep in the energy is what type of system?
open
closed
isolated
none of the above
Answer: In a closed system, only energy can be exchanged between the system and the surroundings. In the same example of boiling a pot of water, putting the lid on the system changes it from open to closed. This is because when the lid is on the pot, matter can no longer escape.
Explanation:
Answer:
I think its closed
Explanation:
Sorry if its wrong
Question 2 of 10 >
Nitrogen and hydrogen combine at a high temperature, in the presence of a catalyst, to produce ammonia,
8H8
N2(g) + 3 H2(g) — 2NH,(8)
Assume 0.170 mol N, and 0.561 mol H, are present initially,
After complete reaction, how many moles of ammonia are produced?
NH,
How many moles of H, remain?
Answer:
Moles of H₂ left = 0.051 mol
Moles of ammonia formed = 0.34 mol
Explanation:
Given data:
Moles of N₂ = 0.170 mol
Moles of H₂ = 0.561 mol
Moles of ammonia formed = ?
Moles of H₂ left = ?
Solution:
Balance chemical equation:
N₂ + 3H₂ → 2NH₃
Now we will compare the moles of ammonia with nitrogen because nitrogen is limiting reactant and limit the yield of ammonia.
N₂ : NH₃
1 : 2
0.170 : 2×0.170 = 0.34 mol
Moles of ammonia formed = 0.34 mol
Moles of H₂ reacted:
N₂ : H₂
1 : 3
0.170 : 3/1×0.170 = 0.51 mol
0.51 moles of hydrogen react with 0.170 moles of nitrogen.
Moles of H₂ left:
Moles of H₂ left = Total - moles reacted
Moles of H₂ left = 0.561 mol - 0.51 mol
Moles of H₂ left = 0.051 mol
A student throws a 0.46kg bowling ball at a velocity of 25m/s what is the kinetic energy of the bowling ball in Joules
Answer:
The answer is 143.57 JExplanation:
The kinetic energy of an object can be found by using the formula
[tex]KE = \frac{1}{2} m {v}^{2} \\ [/tex]
where
m is the mass
v is the velocity
From the question we have
[tex]KE = \frac{1}{2} \times 0.46 \times {25}^{2} \\ = 0.23 \times 625[/tex]
We have the final answer as
143.75 JHope this helps you
What is the force of a 10 kg bowling ball with an acceleration of 8 m/s/s?
0 18 N
0 80 N
O 2N
The answer is 80N
(hope this helps you!!!)
I need help on this. It’s kinda confusing...
Answer: here u go
Explanation:
A. 3.7 x 10^4
B. 4.56 × 10^-8
C. 8.01 × 10^6
Work for A:
Step 1
To find a, take the number and move a decimal place to the right one position.
Original Number: 37,000
New Number: 3.7000
Step 2
Now, to find b, count how many places to the right of the decimal.
New Number: 3 . 7 0 0 0
Decimal Count: 1 2 3 4
There are 4 places to the right of the decimal place.
Step 3
Building upon what we know above, we can now reconstruct the number into scientific notation.
Remember, the notation is: a x 10b
a = 3.7 (Please notice any zeroes on the end have been removed)
b = 4
Now the whole thing:
3.7 x 104
Step 4
Check your work:
104 = 10,000 x 3.7 = 37,000
Work for B:
Step 1
To find a, take the number and move a decimal place to the right one position.
Original Number: 456
New Number: 0.0000000456
Step 2
Now, to find b, count how many places to the right of the decimal.
New Number: 0 . 0 0 0 0 0 0 0 4 5 6
Decimal Count: 1 2 3 4 5 6 7 8 9 10
There are 2 places to the right of the decimal place.
Step 3
Building upon what we know above, we can now reconstruct the number into scientific notation.
Remember, the notation is: a x 10b
a = 4.56
b = 2
Now the whole thing:
4.56 x 102
Step 4
Check your work:
102 = 100 x 4.56 = 456
Work for C:
Step 1
To find a, take the number and move a decimal place to the right one position.
Original Number: 8,010,000
New Number: 8.010000
Step 2
Now, to find b, count how many places to the right of the decimal.
New Number: 8 . 0 1 0 0 0 0
Decimal Count: 1 2 3 4 5 6
There are 6 places to the right of the decimal place.
Step 3
Building upon what we know above, we can now reconstruct the number into scientific notation.
Remember, the notation is: a x 10b
a = 8.01 (Please notice any zeroes on the end have been removed)
b = 6
Now the whole thing:
8.01 x 106
Step 4
Check your work:
106 = 1,000,000 x 8.01 = 8,010,000
Hope this helps!
How many grams of H3PO4 would be needed to produce 25.0 grams of H2O?
Answer:
653 gH³PO⁴
Explanation:
We'll first write the chemical equation for this reaction:
P
4
O
10
(
s
)
+
6
H
2
O
(
l
)
→
4
H
3
PO
4
(
a
q
)
Let's now find the relative number of moles of phosphoric acid (
H
3
PO
4
) using the coefficients of the equation, and the fact that
10.0
mol H
2
O
react:
10.0
mol H
2
O
(
4
l
mol H
3
PO
4
6
mol H
2
O
)
=
6.67
mol H
3
PO
4
Now, using the molar mass of
H
3
PO
4
(calculated to be
98.00
g/mol
), let's find the theoretical mass of phosphoric acid produced:
6.67
l
mol H
3
PO
4
(
98.00
l
g H
3
PO
4
1
mol H
3
PO
4
)
=
653
mol H
3
PO
4
Thus, if the reaction goes to completion, there will be a yield of
653
grams of phosphoric acid
Thank me later
Mark me as brainliest please for my answer
In which Earth system does the rock cycle take place?
cryosphere
atmosphere
geosphere
biosphere
Answer:
geosphere
Explanation:
geo means rocks this is the area
hope this helps dude
A tree frog uses plants or trees for protection from the rain. The frog is protected from the rain and the tree is neither helped nor harmed
smallest to largest: mountain system, mountain range, mountain belt, mountain.
Answer:
mountain, mountain range, mountain system, mountain belt
Explanation:
edge 2021
Which is the dependent variable in an experiment? 1.what I observe. 2. what I keep the same 3.What I change in the experiment. HELP NOW
Answer:
1.what I observe.
Explanation:
The dependent variable in an experiment is what is being observed in the experimental procedure.
This variable is the one that is closely tied to the effects originating from changing the independent variables.
Independent variables are the ones that cause the observation being studied. The effects produced and then studied are the dependent variables.According to Avogadro's law, what is characteristic of 1 mole of gas at STP?
A. It occupies 22.4 L.
B. It occupies no volume.
C. It occupies 1 L.
D. It will expand to any volume.
Answer:
A. It occupies 22.4 L
Explanation:
STP (Standard Conditions for Temperature and Pressure) = 22.4 L per mole at 1 atm
Avogadro's Law states that 1 mol at 1 atm occupies 22.4 L.
how can you tell where sugar enters the blood stream
please help asap
Answer:
Sugar can't enter cells directly , so when blood sugar level rises, ... signal for the release of insulin into the bloodstream.
Explanation:
yes when the sugar enter the bloodstream it may slowly slowly effect in your body and it may causes diabetes
The discharge of chromate ions (CrO42-) to sewers or natural waters is of concern because of both its ecological impacts and its effects on human health if the receiving water is later used as a drinking water source. One way in which chromate can be removed from solution is by its reaction with ferrous ions (Fe2+) to form a mixture of chromic hydroxide and ferric hydroxide solids [Cr(OH)3(s) and Fe(OH)3(s), respectively], which can then be filtered out of the water. The overall reaction can be represented as
CrO42- + 3 Fe2+ + 8 H2O --> Cr(OH)3(s) + 3 Fe(OH)3(s) + 4 H+
How much particulate matter would be generated daily by this process at a facility that treats 60 m3/h of a waste stream containing 4.0 mg/L Cr, if the treatment reduces the Cr concentration enough to meet a discharge limit of 0.1 mg/L?
Answer:
45727g
Explanation:
So, have the overall ionic equation given as the following;
CrO42^- + 3 Fe2^+ + 8 H2O ------> Cr(OH)^3(s) + 3 Fe(OH)^3(s) + 4 H^+.
So, we have (from the question) that the amount or quantity of the waste stream daily = 60m^3/h, and the waste stream daily contains waste stream containing = 4.0 mg/L Cr, and the discharge limit = 0.1 mg/L.
Step one: convert m^3/ h to L/h. Therefore, 60 m^3/h × 1000dm^3 = 60000 L/h .
Step two: Determine or calculate the the value of Cr used up.
The value of Car used up ={ 60,000 × ( 4.0 - 0.1) } ÷ 1000 = 234 g.
Step three: Determine or calculate the mass of Cr(OH)3 and the mass of Fe(OH)3.
The number of moles of Cr = 234/52 = 4.5 moles.
Molar mass of Cr(OH)3 = 103 g/mol and the molar mass of Fe(OH)3 = 106.8 g/mol.
Thus, the mass of Cr(OH)3 = 4.5 × 103 = 463.5 g.
And the mass of Fe(OH)3 = 13.5 × 106.8 = 1441.8 g.
Hence, the total = 463.5 g + 1441.8 g = 1905.3 g.
Step four: Determine or calculate the How much particulate matter would be generated daily.
The amount of the particulate that would be generated daily = 24 × 1905.3 = 45727g.
calculate the equilibrium concentration for the nonionized bases and all ions in a solution that is 0.25M
Answer:
The equilibrium concentration of [CH₃NH₂] = 0.23965 M.
The equilibrium concentration of CH₃NH₃⁺ and OH⁻ = 0.01035 M respectively.
Explanation:
The first step is to write out the dissociation reaction. Therefore, the equation showing the dissociation is given as below;
CH₃NH₂ + H₂0 <--------------------------------------------------------> CH₃NH₃⁺ + OH⁻.
Kindly note that ''<----------->'' arrow shows that the reaction is an equilibrium reaction.
Therefore, at the start of the reaction [that is time, t =0], we have that the concentration of CH₃NH₂ = 0.25M, thus, the concentration of CH₃NH₃⁺ and OH⁻ is zero respectively at this time, t =0.
At equilibrium, the concentration of CH₃NH₂ = 0.25M - x, thus, the concentration of CH₃NH₃⁺ and OH⁻ is x respectively.
Therefore, kb = 4.47 × 10-4 = [CH₃NH₃⁺ ][OH⁻]/[CH₃NH₂]. Hence, slotting in the values into this equilibrium equation showing the relationship between kb and concentration of the species involved, we have that;
kb = 4.47 × 10⁻⁴ = x² /0.25 - x.
x² + 4.47 × 10⁻⁴x - 1.1175 × 10⁻⁴ = 0.
Solving this quadratic equation gives us the value of x as 0.01035 M.
Thus, the concentration of [CH₃NH₂] = 0.25 M - 0.01035 M = 0.23965 M
The equilibrium concentration of [CH₃NH₂] = 0.23965 M.
The equilibrium concentration of CH₃NH₃⁺ and OH⁻ = 0.01035 M respectively.
why is steel a mixture
Answer:
Steel is a mixture because iron does not mix with the carbon and the other components.
Answer:
Steel is a mixture because it does not have a set chemical compound formula. It's a mixture of iron and carbon fused together with other metals or nonmetals to create a mixture.
Explanation:
Steel is an alloy , a solid solution
Steel is a homogenous mixture. It is not a pure substance because it is made form more than one component.
When you balance the equation of the reaction of cobalt chloride and sodium carbonate reacting to form cobalt carbonate and sodium chloride, the sum of the coefficients for all the products and reactants is equal to ___?
Answer:
5
Explanation:
According to this question, the chemical reaction is between Cobalt chloride (CoCl2) and sodium carbonate (Na2CO3) to produce Cobalt carbonate (CoCO3) and sodium chloride (NaCl).
The chemical equation is as follows:
CoCl2 + Na2CO3 ---> CoCO3 + NaCl
However, this equation is not balanced and needs to be with the use of coefficients. The balanced equation is:
CoCl2 + Na2CO3 ---> CoCO3 + 2NaCl
The sum of coefficients on the reactants side is 2 while the sum of coefficients on the product side is 3, hence, the total sum of all products and reactants is 5
In the balanced equation of the reaction of cobalt chloride and sodium carbonate reacting to form cobalt carbonate and sodium chloride, the sum of the coefficients for all the products and reactants is equal to 5.
What is a balanced equation?A balanced equation is an equation for a chemical reaction in which the number of atoms for each element in the reaction and the total charge is the same for both the reactants and the products.
We will balance it using the trial and error method.
Step 1. Write the unbalanced equation.CoCl₂ + Na₂CO₃ ⇒ CoCO₃ + NaCl
Step 2. Balance Cl and Na atoms.We have 2 Cl atoms on the left and 1 Cl atom on the right. The same happens for Na. Thus, we can get the balanced equation by multiplying NaCl by 2.
CoCl₂ + Na₂CO₃ ⇒ CoCO₃ + 2 NaCl
The sum of the coefficients for all the products and reactants is:
1 + 1 + 1 + 2 = 5
In the balanced equation of the reaction of cobalt chloride and sodium carbonate reacting to form cobalt carbonate and sodium chloride, the sum of the coefficients for all the products and reactants is equal to 5.
Learn more about balancing equations here: https://brainly.com/question/17679209
Calculate the mass in grams for 3.28 moles of O2? Please show your work to receive credit.
Answer:
105 g O₂
Explanation:
Step 1: Define
Molar Mass O - 16.00 g/mol
Molar Mass O₂ - 2(16.00) = 32.00 g/mol
Step 2: Use Dimensional Analysis
[tex]3.28 \hspace{3} mol \hspace{3} O_2(\frac{32 \hspace{3} g \hspace{3} O_2}{1 \hspace{3} mol \hspace{3} O_2} )[/tex] = 104.96 g O₂
Step 3: Simplify
We are given 3 sig figs.
104.96 g O₂ ≈ 105 g O₂
A proton is a very tiny particle inside an atom. The mass of a proton is
estimated to be 0.00000000000000000000000167 g. What is the mass of a
proton in scientific notation?
Answer:
1.67 ×10^-24g
Explanation:
counting from the first digit after the point till I got to the first non zero digit
How is stress and strain related to elastic deformation?
Answer:
elastic materials like rubber have small k
Explanation:
is the change in length divided by the original length of the object.
Which of the following are decomposers?
O A. mice
O B. snakes
O C. fungi
OD. spiders
ASAP
Which 2 letters have the most kinetic energy?
W
X
Y
Z
Answer:
See Explanation (X and Z)
Explanation:
The question has missing details as the attachment that illustrates the graph is missing.
I'll answer this question using the attached.
Kinetic energy increases as height decreases
Base on the attachment, from order of highest height to the least, we have:
W
Y
Z
X
So, we can conclude that X has the highest kinetic energy and it is immediately followed by Z
Hence:
X and Z answers the question
find the frequency factor at 273 k for the decomposition of nitrogen dioxide, which has the reaction: 2no2(g) → 2no(g) + o2(g) the activation energy of the reaction is 111 kj/mol and the rate constant is 1.0 x 10-22 s-1. round to two decimal places.
Answer:
0.17 s⁻¹
Explanation:
Step 1: Given data
Temperature of the reaction (T): 273 KActivation energy (Ea): 111 kJ/molRate constant (k): 1.0 × 10⁻²² s⁻¹Ideal gas constant (R): 8.314 × 10⁻³ kJ/mol.KFrequency factor (A): ?Step 2: Calculate the frequency factor
We will use the Arrhenius equation.
ln k = lnA - (Ea/R).(1/T)
lnA = ln k + (Ea/R).(1/T)
lnA = ln 1.0 × 10⁻²² s⁻¹ + [(111 kJ/mol)/(8.314 × 10⁻³ kJ/mol.K)].(1/273K)
A = 0.17 s⁻¹
Which of these four elements is the most reactive metal?
Answer:
Rubidium
Answer: Rubidium is the most reactive metal. Explanation: Metals are the elements that looses electrons and thus, their chemical reactivity will be the tendency to loose electrons.
Explanation:
Complete the reactions of Sn(II) and Sn(IV), and be sure that the reactions are balanced. Do not include the phases (liquid, aqueous, etc.). If no reaction occurs, leave the products side of the equation
completed reaction: SnBr2+PbBr4⟶
completed reaction: SnBr4+PbBr2⟶
Select the statements that are true about the reactions.
A. PbBr4 is more stable than PbBr2.
B. The inert‑pair effect renders Sn(II) as the more stable oxidation state of tin.
C. Sn(IV) is the most stable oxidation state of tin.
D. The inert‑pair effect renders Pb(II) as the more stable oxidation state of lead.
Answer:
The Inert Pair effect renders Pb(II) as the more stable oxidation state of lead
Explanation:
SnBr4 + PbBr2 ---> SnBr2 + PbBr4
SnBr2 + PbBr4 ---->
The Inert pair effect is mostly observed between group 15-17 in the periodic table. It leads to stability of the lower oxidation state of an element.
The reason for the Inert pair effect is that the s electrons become Inert due to poor shielding of the d and f-electrons. The Inert pair effect is a tendency of the s electrons not to participate in bonding (remain an Inert pair).
Owing to the Inert pair effect, Pb II is more stable than Pb IV
Choose all the right answers.
Choose the two places where continental glaciers can be seen.
Iceland
Norway
Antarctica
Greenland
Answer:
the real answer is Iceland, Norway, Antarctica.
Explanation:
It is not Green land proof Glaciers are not an unusual sight in Greenland due to the gigantic ice sheet that covers most of the country. However, there are only a few places where the glaciers occur immediately adjacent to a town, and therefore can be appreciated on an excursion.
proof for Antarctica These large-scale features of glacial erosion can be seen in Antarctica where rock protrudes above the surface of the ice sheet There are many glaciers in the Antarctic. ... The lists include outlet glaciers, valley glaciers, cirque glaciers, tidewater glaciers and ice streams. Ice streams are a type of glacier and many of them have "glacier" in their name, e.g. Pine Island Glacier
proof for Norway are the largest glaciers on mainland Norway. ... In total, Norway has around 1,600 glaciers - 900 of these are in North Norway, but 60% of the total glacier area is south of Trøndelag. 1% of mainland Norway is covered by glaciers.
proof for Iceland Glaciers in Iceland are among the best natural wonders in the world. In fact, the country's glaciers are so great that you can see them from space! With 11% of the total land area covered by ice caps, Iceland is a glacier paradise. Here are the five most amazing glaciers that you must see when visiting Iceland!
What characteristics are used to clarify an area as a wetland?
What is the pressure if the height of a column of mercury is 0.20 m and the density of mercury is 13,600 kg/m3? (remember, gravity is 9.81 m/s2)
Answer:
[tex]p=26683.2Pa[/tex]
Explanation:
Hello,
In this case, since the pressure is computed via:
[tex]p=h*\rho*g[/tex]
Whereas h is the 0.520-m height, [tex]\rho[/tex] is the 13600-kg/m³ density and the g the 9.81-m/s² gravity. Thus, the pressure in Pa is:
[tex]p=0.20m*13,600 \frac{kg}{m^3} *9.81\frac{m}{s^2} \\\\p=26683.2\frac{kg*\frac{m}{s^2} }{m^2} =26683.2\frac{N}{m^2}\\ \\p=26683.2Pa[/tex]
Best regards.
Please help me ! Thank you
Answer:
10
Explanation:
50 POINTS!
There are 5.5 L of a gas present at -38.0 C. What is the temperature if the volume of the gas has changed to 1.30 L?