The intensity at a distance of 6 m from a source that is radiating equally in all directions is 6.0\times 10^{-10} W/m^2. What is the power emitted by the source

Answers

Answer 1

Answer:

P = 271 nW

Explanation:

If the source is radiating equally in all directions, it can be treated as a point source, so all points located at the same distance of the source, have the same intensity I, which is related to the power by the following expression:

       [tex]I = \frac{P}{A} =\frac{P}{4*\pi *r^{2} } (1)[/tex]

Solving for P, we get:

       [tex]P = I*4*\pi *r^{2} = 6.0e-10 W/m2 * 4 * \pi *(6m)^{2} =271 nW (2)[/tex]


Related Questions

as the temperature of a gas in a solid container increases what happens to the pressure exerted by the gas?

Answers

As the temperature increases, the average kinetic energy increases as does the velocity of the gas particles hitting the walls of the container. The force exerted by the particles per unit of area on the container is the pressure, so as the temperature increases the pressure must also increase.

A solid sphere of radius R carries a fixed, uniformly distributed charge q. Obtain an expression for the magnitude of the electric field created by the sphere at a point P outside the sphere.

Answers

Answer:

The electric field outside the sphere will be [tex]\dfrac{qr}{4\pi\epsilon_{0}R^3}[/tex].

Explanation:

Given that,

Radius of solid sphere = R

Charge = q

According to figure,

Suppose r is the distance between the point P and center of sphere.

If [tex]\rho[/tex] be the volume charge density,

Then, the charge will be,

[tex]q=\rho\times\dfrac{4}{3}\pi R^3[/tex].....(I)

Consider a Gaussian surface of radius r.

We need to calculate the electric field outside the sphere

Using formula of electric field

[tex]\oint{\vec{E}\cdot \vec{dA}}=\dfrac{Q}{\epsilon_{0}}[/tex]

[tex]E\times4\pi r^2=\dfrac{\rho\dotc \dfrac{4}{3}\pi r^3}{\epsilon_{0}}[/tex]

Put the value from equation (I)

[tex]E\times4\pi r^2=\dfrac{qr^3}{\epsilon_{0}R^3}[/tex]

[tex]E=\dfrac{qr}{4\pi\epsilon_{0}R^3}[/tex]

Hence, The electric field outside the sphere will be [tex]\dfrac{qr}{4\pi\epsilon_{0}R^3}[/tex].

HELP ASAP!
Everything on screenshot.

Answers

Answer:

11. D

12. A

13. B

Explanation:

Hello! I hope this helps!


1. The surface where they slip is called the fault or fault plane.

2. identifying minerals. Hardness is determined by the ability of one mineral to scratch another. ... Each higher-numbered (harder) mineral will scratch any mineral with a lower number (softer).

3. The crust, the outermost layer, is rigid and very thin compared with the other two.The mantle, which contains more iron, magnesium, and calcium than the crust, is hotter and denser because temperature and pressure inside the Earth increase with depth.

detergents are used to clean the clothes why​

Answers

Answer:Detergent mixes with water to remove dirt and oil from clothes. Water can't remove oil and dirt from clothes. Detergent cleans by causing a chemical reaction with water to force dirt and debris out of clothing. Detergents work with water to loosen the dirt trapped in the material of clothing and clean them away.

Explanation:May i plz have brainlist only if u wanna give me brainlist though have an nice day!

a ballon is filled with air. what forces are acting on the ballon and the air?

Answers

Answer: Three forces act significantly on a freely floating helium-

filled balloon: gravity, air resistance (or drag force), and a

buoyant force.

Explanation:

The air pressure on the bottom of the balloon is slightly higher than the air pressure on the top of the balloon (because of the altitude difference). This difference gives rise to the bouyant force. This force competes with gravity as the two main forces acting on the balloon. Every time your feet hit the ground when you are running, the ground hits your feet with an equal and opposite force. Newton’s third law explains how balloons and rocket engines work. When the neck of an inflated balloon is released, the stretched rubber material pushes against the air in the balloon. The air rushes out of the neck of the balloon.

How can the relationship between atomic number and the number of protons be described?

Answers

Answer:

It's the number of protons in the nucleus of the atom

You push your friend, whose mass is 54kg, down a hill so she can go sledding. Her acceleration is 3m/s2. Calculate the amount of force you applied to your friend.

Answers

Answer:

18 newtons

Explanation:

Divide weight by speed

Q2. You push a crate up a ramp with a force of 10 N. Despite your pushing, the crate slides down the ramp 4 m. How much work did you do

Answers

Answer:

40 J

Explanation:

From the question given above, the following data were obtained:

Force (F) = 10 N

Distance (s) = 4 m

Workdone (Wd) =?

Work done is simply defined as the product of force and distance moved in the direction of the force. Mathematically, we can express the Workdone as:

Workdone = force × distance

Wd = F × s

With the above formula, we can obtain the workdone as follow:

Force (F) = 10 N

Distance (s) = 4 m

Workdone (Wd) =?

Wd = F × s

Wd = 10 × 4

Wd = 40 J

Thus, 40 J of work was done.

As an object’s speed decreases, its kinetic energy (KE) ________.

As an object’s height increases, its gravitational potential energy (PEg) ________.

Answers

1. Decreases
2. Increases

6. As the sky diver's fall the______energy is converted into _______.

a. Energy is created and destroyed.
b. Energy is created but not destroyed.
C. Energy is not created but is destroyed.
d. Energy is neither created nor destroyed.​

Answers

Answer:  B

D makes no sense because energy is created so we can remove that. C also makes no sense because if energy is not created how did it get destroyed if there's no energy in the first place. This leaves us with a and B the correct answer is B because energy is created and cannot be destroyed.

WILL GIVE BRAINLIEST TO THE CORRECT ANSWER
Estimate the net force needed to accelerate a 1000-kg car from rest.

AND

Estimate the weight of a 1000-kg car that is accelerating at 3m/s/s.

Answers

Answer:

See the answers below.

Explanation:

We can solve both problems using Newton's second law, which tells us that the sum of forces on a body is equal to the product of mass by acceleration.

∑F =m*a

where:

F = force [N] (units of newtons)

m = mass = 1000 [kg]

a = acceleration = 3 [m/s²]

[tex]F = 1000*3\\F=3000[N][/tex]

And the weight of any body can be calculated by means of the mass product by gravitational acceleration.

[tex]W=m*g\\W=1000*9.81\\W=9810 [N][/tex]

A skateboarder traveling at 10.4 m/s starts getting chased by a grumpy dog. The skateboarder speeds up with a constant acceleration for 39m over a 3.3s. We want to find the acceleration of the skateboarder over the 3.3s time interval. Which kinematic formula would be most useful to solve for the target unknown?

a. V= Vo+a(t)
b. X= (V+Vo/2)t
c. X= Vo(t)+1/2at^2
d. V^2 = Vo^2 +2ax
e. X= vt-1/2at^2

Answers

Answer:

c)X= Vo(t)+1/2at^2

Explanation:

From the question we are told that

initial speed u=10.4

displacement d= 39

time t=3.3s

accelaration a=?

Generally the best equation in solving for Acceleration is given to be

X= Vo(t)+1/2at^2

Mathematically

     [tex]X= Vo(t)+1/2at^2[/tex]

     [tex]39=10.4t+\frac{a}{2} *3.3^2[/tex]

     [tex]5.445a=39-34.32[/tex]

     [tex]a=39-34.32/5.445[/tex]

     [tex]a=4.68/5.445[/tex]

     [tex]a=0.86m/s^2[/tex]

1| Page
01. (a) (i) What is Polarization of a matter
(ii) draw in atomic view before and after​

Answers

Answer:

Polarization occurs when an electric field distorts the negative cloud of electrons around positive atomic nuclei in a direction opposite the field. Polarization P in its quantitative meaning is the amount of dipole moment p per unit volume V of a polarized material, P = p/V.

Explanation:

Answer:

Polarization occurs when an electric field distorts the negative cloud of electrons around positive atomic nuclei in a direction opposite the field. Polarization( P) in its quantitative meaning is the amount of dipole moment (p) per unit volume V of a polarized material, where P = p/V.

⚠️Please Help Me! I Need It Now!⚠️

Answers

Answer:

A. They are moving at 60 mph

Explanation:

When looking at the car on the track pass by, the people inside appear to be moving at the same speed as the car. So if the car is going 60 mph, the people instead will appear as though they are moving at 60 mph as well.

Which process causes Earth to act like a magnet?
O A. Convection of hot material in the mantle
O B. Flow of water due to gravitational energy
O C. Movement of ions in the core
O D. Shifting of the tectonic plates
SUBMI

Answers

A - the hot liquid metal in the outer core of Earth creates electric currents

Answer:movement of iron in core

Explanatio

Which region contains the alkaline earth metal family of elements? A, B, C or D?

Answers

Answer:

B

Explanation:

B is the most likely region that contains alkaline earth family elements.

The alkaline earth metal family of elements is represented by B region in the figure.

What is alkaline earth metal?

The alkaline earth metals are found on the periodic table in Group 2, which is on the far left side of the table between Group 1, the alkali metals, and Groups 3-12, the transition elements. This family is made up of six metals: beryllium, magnesium, calcium, strontium, barium, and radium.

What is periodic table?

The periodic table, also known as the periodic table of the elements, is a tabular display of the chemical elements.

To know more about Alkaline earth metal here

https://brainly.com/question/11857448

#SPJ2

4. What is the tan gential velocity of an object moving in a path of radius 2m with an angular velocity of
3rad/s.pls help me​

Answers

Answer:

6m/s

Explanation:

The tangential velocity is the product of the linear velocity and the radius. This is expressed as;

v = wr

w is the angular velocity = 3rad/s

r is the radius = 2m

Substitute

v = 3 * 2

v = 6m/s

Hence the tangential velocity of the object is 6m/s

physical science is the connection between
A. atoms and cells
B. energy and life
C. matter and rocks
D. matter and energy

Answers

Answer:

d d d d d d s d. d d d d d df ff f f. f f f r r ff f f ff d f f f f f f f f f r. ff r f. r

The first five harmonics for a vibrating string are shown in Figure24.13.a.For each harmonic, identify the number of wavelengths represented.b.For each harmonic, identify the number of nodes and antinodes that are present (include the ends of the string in your count).c.Which of the five harmonics has the highest natural frequency?d.Make a drawing that shows what the sixth harmonic would look like.

Answers

1st: 0.5 wavelengths. 2 nodes and 1 anti node

2nd: 1 wavelength. 3 nodes and 2 anti nodes

3rd: 1.5 wavelength. 4 nodes and 3 anti nodes

4th: 2 wavelengths. 5 nodes and 4 anti nodes

5th: 2.5 wavelengths. 6 nodes and 5 anti nodes

The 5th harmonic has the highest natural frequency out of these 5

Put a photo of the 6th harmonic in this post aswell

Why are some forms of speech not protected by the First Amendment?

because they support different religious views

because they could cause harm to others

because they criticize the government

because they are expressed in writing

Answers

Answer:

because they could cause harm to others

Explanation:

The "First Amendment" gives people the right to freedom of: religion, expression, press and assembly. However, the government has the right to censor one's speech if it could cause harm to others. Such speech falls under "unprotected category." This category includes the following: Defamation, Perjury, Blackmail, Plagiarism, True Threats, Child P.ornography, Obscenity, Solicitations to Commit Crime, Fighting Words, Incitement of Imminent Lawless Action. These forms of speeches are meant to harm other people, thus, they are not protected by the First Amendment.

Answer:

because they could cause physical harm to others

Explanation:

Took the test..

Waves transport
over distances.
A. solids
B.
liquids
C.
gases
D.
energy

Answers

Answer:

d)energy

Explanation:

Waves can transfer energy over distance without moving matter the entire distance. For example, an ocean wave can travel many kilometers without the water itself moving many kilometers. The water moves up and down—a motion known as a disturbance. It is the disturbance that travels in a wave, transferring energy.

This cantilever beam is loaded by two point loads. If the moment of inertia of the beam is 5.0*10-6 m4 and the modulus of elasticity is 210 GPa, the maximum deflection of the beam is:

Answers

Answer:

The answer is i just need the 5 pt sowwry bro hope you have luck finding it ;]

Explanation:

you prolly alr found it but it doesnt really matter

Question 3 (1 point)
here were 2cars racing a quarter mile. The green car had a mass of 1200kg and crossed the finish line with a velocity of 53m/s. The red car had
a mass of 1100Kg and crossed the finish line with a velocity of 55m/s.,Which car had the great momentum?

Black car
Blue car
Green car
Red car

Answers

Answer:

The green car had the greatest momentum

Explanation:

Momentum

Momentum can be defined as "mass in motion" and is calculated as the product of the mass of the object by its velocity.

Being v the magnitude of the velocity and m the mass of the object, the momentum is calculated with:

p = mv

The green car had a mass of m1=1200 kg and crossed the finish line at v1=53 m/s. Hence, its momentum was:

p1 = 1200 Kg * 53 m/s = 63600 Kg.m/s

The red car had a mass of m2=1100 kg and crossed the finish line at v2=55 m/s. Hence, its momentum was:

p2 = 1100 Kg * 55 m/s = 60500 Kg.m/s

Since p1 > p2, then the green car had the greatest momentum

What average net force is required to accelerate a 3950 kg bus to a speed of 25m/s in 10.5 s?

Answers

Answer:

Explanation:

ACCELERATION = CHANGE IN VELOCITY

                                          TIME  TAKEN

∴ a = 25 - 0

         10.5

∴ a =   50    

           21    

by using f = ma,

we get , f =   3950 ×  50                                                                                  

                                     21

∴  A FORCE OF 9404.8 N IS NEEDED TO ACCELERATE A BUS OF 3950 KG.

Two points charge of 4\mu C and 2\mu C are placed at theopposite corners of a rectangle. What is the potential difference Va- Vb

Answers

Answer:

[tex]Va-Vb=168KV[/tex]

Explanation:

From the question we are told that

Two points charge of 4\mu C and 2\mu C

Generally we find the  Va and Vb individually to find there difference

Given a rectangle with two equal sides each,Assume lengths for bot sides

Length L=0.3

Breath B=0.4

Diagonal D=[tex]\sqrt{0.3^2+0.4^2} =0.5[/tex]

at  opposite sides

Mathematically Va can represented as

[tex]Va =k(\frac{4*10^_-_6}{0.3} +\frac{-2*10^_-_6}{0.5} )[/tex]

[tex]Va =9*10^9(\frac{4*10^_-_6}{0.3} +\frac{-2*10^_-_6}{0.5} )[/tex]

[tex]Va =9*10^9(0.00001333333-0.000004} )[/tex]

[tex]Va =84000V[/tex]

[tex]Va =84KV[/tex]

Mathematically Vb is  represented as

[tex]Va =k(\frac{-4*10^_-_6}{0.3} +\frac{2*10^_-_6}{0.5} )[/tex]

[tex]Va =9*10^9(\frac{-4*10^_-_6}{0.3} +\frac{+2*10^_-_6}{0.5} )[/tex]

[tex]Va =9*10^9(-0.00001333333+0.000004} )[/tex]

[tex]Va =-84000V[/tex]

[tex]Va =-84KV[/tex]

Therefore

[tex]Va-Vb=84-(-84)\\Va-Vb=84+84\\Va-Vb=168KV[/tex]

Find the applied voltage of a telephone circuit that draws 0.017A through a resistance Of 5,000 ohms

Answers

Following ohms law ( V=IR ) Therefore the voltage will be = 0.017 x 5000 =85 volts

Bro help me

Explain how an object with a higher temperature can have less thermal energy than an object with a lower temperature. ASAP

Answers

Thermal energy is the sum of the energy of all the particles. That means that large objects at a low temperature (with slower moving particles) can have more energy than small objects with high temperatures (faster moving particles). The faster the particles, the more energy they can transfer.

The total energy of all the particles makes up thermal energy. This implies that larger objects with slower-moving particles at low temperatures can have more energy than smaller ones with higher temperatures.

What is thermal energy?

Thermal energy is the sum of the energies of all the particles. This implies that larger objects at low temperatures can have more energy than smaller ones at higher temperatures due to slower-moving particles.

These molecules and atoms move more quickly when something is heated, providing it with more thermal energy. Compared to cold water, hot water has more thermal energy.

Therefore, molecules and atoms in colder objects move more slowly and have less thermal energy than those in warmer ones. The ability of particles to transfer energy increases with speed.

To learn more about thermal energy, refer to the below link:

https://brainly.com/question/11278589

#SPJ2

A 47.5-g ball moves at 30.0 m/s. If its speed is measured to an accuracy of 0.20%, what is the minimum uncertainty in its position

Answers

Answer:

The minimum uncertainty in its position is 1.85 x 10⁻³² m.

Explanation:

Given;

mass of the ball, m = 47.5 g = 0.0475 kg

speed of the ball, v = 30 m/s

measuring accuracy of the speed, = 0.2% = 0.002

The uncertainty in measurement of momentum;

ΔP = mΔv

ΔP = (0.0475)(30 x 0.002)

ΔP = 2.85 x 10⁻³ kgm/s

The uncertainty in position is calculated as;

[tex]\delta x \geq \frac{h}{4\pi (\delta P)}[/tex]

where;

h is Planck's constant

[tex]\delta x \geq \frac{6.626 \ \times \ 10^{-34}}{4\pi (2.85 \ \times \ 10^{-3})} \\\\\delta x \geq 1.85 \ \times \ 10^{-32} \ m[/tex]

Thus, the minimum uncertainty in its position is 1.85 x 10⁻³² m.

the combined focal length of two thin lens is 24 cm and the focal length of one converging lens is 8
cm what is the focal length of the other​

Answers

Answer: f = -12 cm

Explanation: Combined lenses is an array of  simple lenses with a common axis. The combination is useful for correction of optical aberrations which cannot be corrected by simple lenses.

When two lenses are in contact and are thin, focal lengths are related as:

[tex]\frac{1}{F} =\frac{1}{f_{1}} +\frac{1}{f_{2}}[/tex]

If there is a distance between the lenses, the focal length will be:

[tex]\frac{1}{F} =\frac{1}{f_{1}} +\frac{1}{f_{2}} -\frac{d}{f_{1}f_{2}}[/tex]

Since the lenses in the question above are thin and in contact, the focal length of one of them will be:

[tex]\frac{1}{F} =\frac{1}{f_{1}} +\frac{1}{f_{2}}[/tex]

[tex]\frac{1}{f_{2}} =\frac{1}{f_{1}} -\frac{1}{F}[/tex]

[tex]\frac{1}{f_{2}} =\frac{1}{8} -\frac{1}{24}[/tex]

[tex]\frac{1}{f_{2}} =\frac{-2}{24}[/tex]

[tex]f_{2}=[/tex] -12

The focal length of the other lens is -12 cm, with the negative sign meaning it's a converging lens.

What is constant of a spring if there is 150 j when stretched 0.25 m?

Answers

0.45 This is the wrong answer
Other Questions
Hi, im not sure on this wording, any help is appriciated. Please answer!! I added a screenshot Which of the following cigarette ingredients is known to cause cancer?tararsenicformaldehydeAll of these ingredients can cause cancer. How did Aryan culture explain the use of the caste system PLEASE HELP MEEEEE!!!! DUE TODAY!!! WILL GIVE BRAINLISTClassify each polynomial and determine its degree.The polynomial 3x2 is a (blank) with a degree of (blank).The polynomial x2y + 3xy2 + 1 is a (blank)with a degree of (blank). PLEASE HELP!!! BRAINEST AND 50 POINTS, I WOULD BE MOST GRATEFUL IF YOU HELP ME, THANK YOU!!!!!!!!!! READ THE ARTICLE FRIST!! Solve this question. 50 pts!! I have475 pounds of Apples to make1000 apple tarts how many pounds of apples are in each tart Sam builds 360 toys in 8 hour. At that rate,how many toys would he build in 4 minutes 6. Why does DNA need to be organized into chromosomes before cell division?The DNA would be too difficult to separate without this organization.The DNA would take up too little space without this organization.The DNA would be pulled apart rapidly without this organization.The DNA would be broken without this organization. Evaluate the function: f(x)=x2+2x, find f(1) Can you guys help me please ?!! Thank you! Find the area of the figure.A. 50 ft^2B. 41 ft^2C. 42 ft^2D. 38 ft^2 What issues contributed most to sectionalism in the United States? PLEASE HELP!!!! On average, Jack can fold his laundry in 30 minutes, but, depending on how much laundry he has, his time can vary from the average by 10 minutes.Which absolute value equation can be used to calculate Jack's maximum and minimum time to fold his laundry?Let x represent the maximum and minimum time.|x30|=10|x+10|=30|x10|=30|x+30|=10 Which two sentences describe the characteristics of a corporation?The company is treated as a separate tax entity by law.The owners have to accept partial liability for debts.It is possible to raise large amounts of capital by selling company stock.The owners are known as corporators. Please give me the correct answer PLS HELP FAST, IM FAILING LOLWhat is true about life under slavery?A. Slave owners discouraged slaves from adopting elements of whitecultureB. Slave owners did not pay slaves for their work,c. Enslaved African Americans had equal rights to those of whitepeopleD. Slaves had a great deal of freedom other than choosing where towork. find the co valance of c in C2S2 Three friends go grocery shopping together, and each guys the same kinds of strawberries. Akio buys 2 pounds and pays 1.50. Gordon buys 3 pounds and pays 2.25. Maria buys 4 pounds and pays 3.00.