The maximum amount of nickel(II) hydroxide that will dissolve in a 0.169 M nickel(II) nitrate solution is _________ M.

The balanced net ionic equation for the reaction of NiBr2(aq) with (NH4)2S(aq) is:

Ni2+(aq) + S2-(aq) → NiS(s)

Note that the spectator ions NH4+ and Br- do not participate in the reaction and are not included in the net ionic equation.

Spectator ions are ions that do not participate in a chemical reaction, meaning they do not undergo any chemical change during the reaction. They are present in both the reactants and the products and do not affect the outcome of the reaction.

Spectator ions can be identified by looking at the balanced chemical equation of the reaction and canceling out ions that appear on both sides of the equation.

Visit here to learn more about spectator ions brainly.com/question/28913274

#SPJ11

The balanced net ionic equation for the reaction of NiBr2(aq) with (NH4)2S(aq) is:

Ni2+(aq) + S2-(aq) → NiS(s)

Note that the spectator ions NH4+ and Br- do not participate in the reaction and are not included in the net ionic equation.

Spectator ions are ions that do not participate in a chemical reaction, meaning they do not undergo any chemical change during the reaction. They are present in both the reactants and the products and do not affect the outcome of the reaction.

Spectator ions can be identified by looking at the balanced chemical equation of the reaction and canceling out ions that appear on both sides of the equation.

Visit here to learn more about spectator ions brainly.com/question/28913274

#SPJ11

Based on the given H NMR chemical shift data, we can match the compounds as follows:
Compound A (δ 3.2 and δ 12.4) corresponds to malonic acid (HO2CCH2CO2H), as the two singlets result from the two chemically equivalent methylene (CH2) protons and the two carboxylic acid (CO2H) protons.

Compound B (δ 6.3 and δ 12.4) corresponds to maleic acid (cis-HO2CCH=CHCO2H). The signal at δ 6.3 is due to the two equivalent vinylic protons (CH=CH), while the signal at δ 12.4 results from the two carboxylic acid (CO2H) protons.

Compound C (δ 8.0 and δ 11.4) corresponds to formic acid (HCO2H). The signal at δ 8.0 arises from the single aldehyde proton (CH), and the signal at δ 11.4 is attributed to the carboxylic acid (CO2H) proton.

To know more about chemical shift click here:

https://brainly.com/question/30579222

#SPJ11

Answer:

10.34 mL

Explanation:

The molar mass of K2S is 110.26g/mol.

Number of moles of K2S = mass / molar mass

Number of moles of K2S = 28.5g / 110.26g/mol = 0.2586 mol

Now, we can use the definition of molarity to calculate the volume of the solution that can be prepared.

Molarity = number of moles / volume of solution (in liters)

Rearranging the equation, we get:

Volume of solution = number of moles / molarity

Volume of solution = 0.2586 mol / 25 mol/L = 0.010344 L = 10.34 mL

Therefore, 10.34 mL of a 25M solution of K2S can be prepared from 28.5g of K2S.

The pH of a 0.100 M NH₃ solution with Kb = 1.8 x 10⁻⁵ is 11.13. (A)


1. Write the Kb expression: Kb = [NH₄⁺][OH⁻] / [NH₃]

2. Set up an ICE table: Initial concentrations are [NH₃] = 0.100 M, [NH₄⁺] = 0, [OH⁻] = 0. Changes are -x for NH₃ and +x for NH₄⁺ and OH⁻.

3. Substitute values into the Kb expression: (1.8 x 10⁻⁵) = (x)(x) / (0.100 - x)

4. Since x is small compared to 0.100, we can approximate by removing x in the denominator.

5. Solve for x: x² = (1.8 x 10⁻⁵)(0.100) ⟹ x = 1.34 x 10⁻³ M

6. Calculate the pOH: pOH = -log(1.34 x 10⁻³) ≈ 2.87

7. Find the pH: pH = 14 - pOH ≈ 11.13(A)

To know more about ICE table click on below link:

https://brainly.com/question/30642088#

#SPJ11

The literature value for KHT solubility is 0.042 g/100 mL. The value obtained from the experiment is slightly higher than the literature value.

Solubility is the ability of a substance to dissolve in a solvent, usually a liquid, to form a homogeneous solution. It is expressed as the maximum amount of solute that can dissolve in a given quantity of solvent or solution. It can also be expressed in terms of concentration, as the amount of solute that dissolves in a given volume of solvent or solution at a given temperature. A substance is considered soluble if it dissolves in a solvent at a rate sufficient to reach equilibrium.

Given: Solubility of KHT in mol L⁻¹ = 0.00025 mol/L

Conversion: 0.00025 mol/L x 204.22 g/mol = 0.0505 g KHT/100 mL

The literature value for KHT solubility is 0.042 g/100 mL. The value obtained from the experiment is slightly higher than the literature value.

To learn more about solubility

https://brainly.com/question/23946616

#SPJ1

The given statement, A substance that causes the oxidation of another substance is called an oxidizing agent is True because the oxidizing agent is a substance that causes the oxidation of another substance.

Oxidation is a chemical reaction in which electrons are transferred from one molecule to another, resulting in the formation of new molecules. Oxidizing agents can be various compounds such as oxygen, halogens, and certain metal ions.

Oxygen is the most common oxidizing agent and is used in many oxidation reactions. Halogens, such as chlorine, bromine and iodine, are also used as oxidizing agents in certain reactions.

Metal ions, such as iron, copper and manganese, may also act as oxidizing agents in reactions. Oxidizing agents are essential in biological processes such as respiration and metabolism, as well as industrial processes such as electricity generation and chemical manufacturing.

Know more about oxidizing agent here

https://brainly.com/question/10547418#

#SPJ11

Answer:

Volume = 205

Explanation:

Using; PV = nRT

P (Pressure) = 0.634atm

V (Volume) = ?

n (Number of moles) = 4.56mol

R (Universal Gas Constant) = 0.082

T (Absolute Temperature) = 75+273 = 348K

0.634 × V = 4.56 × 0.082 × 348

V = 130.12416 ÷ 0.634

V = 205

Approximately 8.79 grams of CO₂ are produced when 20 grams of CaCO₃ and 25 grams of HCl are mixed.

The balanced chemical equation for the reaction between calcium carbonate (CaCO₃) and hydrochloric acid (HCl) is:

CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O

From the equation, we can see that 1 mole of CaCO₃ reacts with 2 moles of HCl to produce 1 mole of CO₂. The molar mass of CaCO₃ is 100.09 g/mol, and the molar mass of HCl is 36.46 g/mol.

To find the mass of CO₂ produced, we need to determine which reactant is limiting. This can be done by calculating the number of moles of each reactant and comparing them to the stoichiometric ratio in the balanced equation.

Number of moles of CaCO₃ = 20 g / 100.09 g/mol = 0.1998 mol

Number of moles of HCl = 25 g / 36.46 g/mol = 0.685 mol

According to the balanced equation, 1 mole of CaCO₃ reacts with 2 moles of HCl. Therefore, the limiting reactant is CaCO₃, since only 0.1998 moles of CaCO₃ are available to react with HCl.

From the balanced equation, we know that 1 mole of CaCO₃ produces 1 mole of CO₂. Therefore, the number of moles of CO₂ produced is also 0.1998 mol.

The molar mass of CO₂ is 44.01 g/mol. Therefore, the mass of CO₂ produced is:

Mass of CO= 0.1998 mol x 44.01 g/mol = 8.79 g

Therefore, approximately 8.79 grams of CO₂ are produced when 20 grams of CaCO₃ and 25 grams of HCl are mixed.

Learn more about molar mass,

https://brainly.com/question/22997914

#SPJ4

On a gas chromatogram, the time from sample injection to the time of maximum peak intensity is referred to as the "retention time" for that peak.

Gas chromatography is used to separate compounds of a mixture by injecting a gaseous/liquid sample into a mobile phase known as the carrier gas, which is usually and inert or unreactive gas and passing the gas through a stationary phase.

If we have a sample with many compounds, each compound in the sample will spend different time on the column based on its chemical composition which means that, each will have a different retention time.

For more questions on gas chromatography: https://brainly.com/question/30500847

#SPJ11

Answer:

ZnS

Explanation:

Zinc sulfide is not soluble in water while Calcium sulfide is, therefore the former will precipitate but the latter won't

The vapor pressure of water at 25°C (298 K) is approximately 606.8 atm, b- the standard free energy change for the change H2O(l) → H2O(g) is -32.5 kJ/mol.

To calculate ∆G°298 for the change H2O(l) → H2O(g), we need to use the following thermodynamic equation:

∆G°298 = ∆H°298 - T∆S°298

where ∆H°298 is the standard enthalpy change, ∆S°298 is the standard entropy change, and T is the temperature in Kelvin.

First, we need to calculate ∆S°298 for the change H2O(l) → H2O(g). We can use the Clausius-Clapeyron equation:

ln(P2/P1) = (∆Hvap/R)(1/T1 - 1/T2)

where P1 is the vapor pressure of water at temperature T1, P2 is the vapor pressure of water at temperature T2, ∆Hvap is the enthalpy of vaporization of water, R is the gas constant (8.314 J/mol*K), and T1 and T2 are the temperatures in Kelvin.

We are given that the vapor pressure of water at 20°C (293 K) is 17.54 torr. We can convert this to atmospheres (atm) by dividing by 760 torr/atm:

P1 = 17.54/760 = 0.023 atm

We are also given ∆Hvap = 40.65 kJ/mol. Converting this to J/mol and dividing by R gives:

(40.65 * 1000 J/mol) / (8.314 J/mol*K) = 4891 K

using this value, along with T1 = 293 K and T2 = 298 K, we can solve for ln(P2/P1)

ln(P2/0.023) = (4891 K)(1/293 K - 1/298 K)

ln(P2/0.023) = 26.84

P2/0.023 =e(26.84)

P2 = 606.8 atm

Next, we can calculate ∆S°298 using the equation:

∆S°298 = ∆H°vap/T + R ln(P2/P1)

∆S°298 = (40.65 * 1000 J/mol) / (298 K) + 8.314 J/mol*K * ln(606.8/0.023)

∆S°298 = 109.0 J/mol*K

Now we can plug in the values for ∆H°298 and ∆S°298, along with T = 298 K, into the equation for ∆G°298:

∆G°298 = ∆H°298 - T∆S°298

∆G°298 = (0 kJ/mol) - (298 K)(109.0 J/mol*K)

∆G°298 = -32.5 kJ/mol

learn more about standard free energy here:

https://brainly.com/question/15876696

#SPJ11

The balanced equation for the reaction between calcium chloride ([tex]CaCl_{2}[/tex]) and silver nitrate ([tex]AgNO_{3}[/tex]) to produce silver chloride (AgCl) and calcium nitrate ([tex]Ca(NO_{3})_{2}[/tex]) is:

CaCl2 (aq) + 2AgNO3 (aq) → 2AgCl (s) + Ca(NO3)2 (aq)

The precipitate in this reaction is silver chloride (AgCl), which is a white solid that is insoluble in water.

The ionic equation for this reaction can be written by first breaking down all the soluble compounds into their constituent ions:

Ca2+ (aq) + 2Cl- (aq) + 2Ag+ (aq) + 2NO3- (aq) → 2AgCl (s) + Ca2+ (aq) + 2NO3- (aq)

In this equation, Ca2+ and NO3- are spectator ions since they appear on both sides of the equation and do not undergo any chemical change.

The net ionic equation for the reaction can be obtained by removing the spectator ions from the ionic equation:

2Ag+ (aq) + 2Cl- (aq) → 2AgCl (s)

The net ionic equation shows only the species that participate in the actual chemical reaction, which in this case is the formation of silver chloride.

Learn more about iconic equations, here:

https://brainly.com/question/30379359

#SPJ1

This reaction's equilibrium constant is 0.300.

To solve for the equilibrium constant (Kc), we need to use the concentrations of the reactants and products at equilibrium. We are given the equilibrium concentration of B(g) which is 0.035 M. However, we need to find the equilibrium concentrations of A(g) and C(g).

From the balanced chemical equation, we know that for every 2 moles of A that react, 1 mole of B and 3 moles of C are produced. Let x be the equilibrium concentration of A. Then, using stoichiometry, the equilibrium concentrations of B and C are:

[B] = 0.035 M
[C] = 3x

Since the reaction stoichiometry is 2:1:3 (A:B:C), the equilibrium concentrations in terms of x are:

[A] = 0.115 - 2x
[B] = 0.035
[C] = 3x

Now we can write the expression for the equilibrium constant (Kc):

Kc = ([B]^1[C]^3) / [A]^2

Plugging in the equilibrium concentrations, we get:

Kc = (0.035)(3x)^3 / (0.115 - 2x)^2

Simplifying this expression, we get:

Kc = (0.0315x^3) / (0.013225 - 0.460x + 4x^2)

At equilibrium, the reaction quotient Qc is equal to Kc. Therefore, we can set up an equation to solve for x:

Kc = (0.0315x^3) / (0.013225 - 0.460x + 4x^2)

Kc = 3.3 (given)

3.3 = (0.0315x^3) / (0.013225 - 0.460x + 4x^2)

Solving this equation for x gives us x = 0.020 M. Therefore, the equilibrium concentrations are:

[A] = 0.115 - 2x = 0.075 M
[B] = 0.035 M
[C] = 3x = 0.060 M

Plugging in these values into the expression for Kc gives us:

Kc = (0.035)(0.060)^3 / (0.075)^2

Kc = 0.300

Therefore, the equilibrium constant for this reaction is 0.300.

For more such questions on equilibrium constant , click on:

https://brainly.com/question/3159758

#SPJ11

The substitution product of 3-bromo-3-methylpentane and methanol will be 3-methyl-3-pentanol, and The substitution product of 3-chloro-3-methylhexane and methanol will be 3-methyl-3-hexanol.

3-bromo-3-methylpentane and methanol undergo SN1 reaction as follows; Step 1; Ionization of the substrate

3-bromo-3-methylpentane → 3-methyl-3-pentyl cation + Br⁻

Step 2; Nucleophilic attack by methanol and deprotonation

3-methyl-3-pentyl cation + CH₃OH → 3-methyl-3-pentanol + H⁺

Therefore, the substitution product is 3-methyl-3-pentanol.

3-chloro-3-methylhexane and methanol undergo SN₁ reaction as follows; Step 1; Ionization of the substrate

3-chloro-3-methylhexane → 3-methyl-3-hexyl cation + Cl⁻

Step 2; Nucleophilic attack by methanol and deprotonation

3-methyl-3-hexyl cation + CH₃OH → 3-methyl-3-hexanol + H⁺

Therefore, the substitution product is 3-methyl-3-hexanol.

To know more about substitution product here

https://brainly.com/question/14052597

#SPJ4

To upload a single file of all the skeletal structures for the molecules in the table, you can use a program like ChemDraw or MarvinSketch to draw the structures and save them as individual files. Then, you can combine them into a single PDF or image file using a tool like Adobe Acrobat or Microsoft Paint. Just make sure that each structure is clearly labeled with the name of the molecule to avoid any confusion.

Let us discuss this in detail.

To upload a single file of all the skeletal structures for the molecules in the table, follow these steps:

1. Gather the skeletal structures: Collect images or create diagrams of the skeletal structures for each molecule listed in the table. Make sure they are accurate and clear.

2. Label the structures: For each skeletal structure, add a label that clearly indicates the name of the molecule. You can do this using image editing software or by creating the labels directly on the diagrams if you are drawing them.

3. Combine the structures into a single file: Arrange all the labeled skeletal structures in a document or image file, ensuring that each structure is easily distinguishable and well-organized. You can use software like Microsoft Word, PowerPoint, or an image editor like GIMP or Photoshop for this purpose.

4. Save the file: Save your document or image file with an appropriate name that reflects its contents, such as "Skeletal_Structures_of_Molecules."

5. Upload the file: Finally, upload the single file containing all the labeled skeletal structures for the molecules in the table to the designated platform or as per the given instructions.

By following these steps, you will have successfully created and uploaded a single file of all the skeletal structures for the molecules in the table.

Learn more about skeletal structures at https://brainly.com/question/29165067

#SPJ11

Answer:

Density is grams / cm^3

Explanation:

Since The formular for density is mass over volume, most commonly cm^3, we can find the mass of a quantity given the volume. Say D=.5 g/cm^3. If we have 1 mL of a substance then we do 1 mL = 1cm^3

1 cm^3 x (.5 g / cm^3) = .5 g of the substance

1. The equilibrium expression for the compound is:

[Cd²⁺] [CO₃²⁻] / [CdCO₃]

2. The solubility of product, Ksp for the compound is  1.0×10⁻¹²

Equilibrium constant, Keq for a given chemical reaction is written as shown below:

nReactant ⇌ mProduct

Equilibrium constant (Keq) = [Product]ᵐ / [Reactant]ⁿ

Now, we can shall determine the equilibrium expression, Keq for the reaction. Details below:

CdCO₃(aq) ⇌ Cd²⁺(aq) +  CO₃²⁻(aq)

Equilibrium constant (Keq) = [Product]ᵐ / [Reactant]ⁿ

Equilibrium constant expression = [Cd²⁺] [CO₃²⁻]/ [CdCO₃]

The solubility of product, Ksp for the compound ca be obtained as follow:

Ksp = [Cd²⁺] × [CO₃²⁻]

Ksp = 1.0×10⁻⁶ × 1.0×10⁻⁶

Ksp = 1.0×10⁻¹²

Learn more about equilibrium constant:

https://brainly.com/question/16589765

#SPJ1

Conductivity depends on the number of ions present in the solution and their mobility, a compound that produces more ions will have higher conductivity. In this example, A2X2 will have higher conductivity than A1X due to the greater number of ions it produces.

The Group A compounds with the same concentration (0.05 M) have large differences in conductivity values because their degree of dissociation varies. The degree of dissociation refers to the extent to which a compound breaks down into its constituent ions in a solution.
For example, let's consider two Group A compounds: sodium chloride (NaCl) and calcium chloride (CaCl2). NaCl dissociates completely in water to form Na+ and Cl- ions, while CaCl2 dissociates partially to form Ca2+ and 2Cl- ions.
The dissociation equation for NaCl is: NaCl → Na+ + Cl-
The dissociation equation for CaCl2 is: CaCl2 → Ca2+ + 2Cl-
Since NaCl dissociates completely, it produces a higher concentration of ions in solution, resulting in higher conductivity. On the other hand, CaCl2 only partially dissociates, resulting in a lower concentration of ions in solution and lower conductivity.
Therefore, the differences in conductivity values between Group A compounds with the same concentration (0.05 M) can be attributed to their varying degree of dissociation.
The Group A compounds have large differences in conductivity values at the same concentration (0.05 M) due to the varying degrees of dissociation and the number of ions produced by each compound when dissolved in a solution.
For instance, consider two Group A compounds, A1X and A2X2:
1. A1X dissociates as:
  A1X → A1⁺ + X⁻
  In this case, one molecule of A1X produces two ions in the solution.
2. A2X2 dissociates as:
  A2X2 → A2⁴⁺ + 2X²⁻
  Here, one molecule of A2X2 produces three ions in the solution.
Since conductivity depends on the number of ions present in the solution and their mobility, a compound that produces more ions will have higher conductivity. In this example, A2X2 will have higher conductivity than A1X due to the greater number of ions it produces.

To learn more about Conductivity, click here:

brainly.com/question/31364875

#SPJ11

Since we are ignoring gravitational effects, we can assume that the sucrose solution and the water on top of it will mix through diffusion.

a)After 24 s, some diffusion will have occurred, but the concentration profile will not have fully mixed yet. We can use Fick's second law to find the concentration at 5.0 cm above the lower layer: ∂C/∂t = D(∂^2C/∂x^2).

where C is the concentration, t is time, x is distance, and D is the diffusion coefficient. Since we are only interested in the concentration at 5.0 cm above the lower layer, we can set x = 0.05 m. The diffusion coefficient for sucrose in water at room temperature is about 5.2 x 10^-10 m^2/s.

Using the initial conditions of 10 g of sugar in 5.0 cm^3 of water, we can calculate the initial concentration: C(0,0.05) = 10 g / (5.0 cm^3) = 2 g/cm^3, Now we can solve Fick's second law for C(24,0.05): C(24,0.05) = C(0,0.05) erfc[(0.05)/(2 sqrt(D t))].

erfc is the complementary error function, which can be found in tables or using a calculator. Plugging in the values, we get: C(24,0.05) = 1.10 g/cm^3
To convert to molarity, we need to divide by the molecular weight of sucrose (342.3 g/mol) and multiply by 1000 to convert from g/cm^3 to g/L: C(24,0.05) = 1.10 g/cm^3 / 342.3 g/mol * 1000 g/L = 3.21 x 10^-3 M.

b. After 2.4 years, diffusion will have had ample time to fully mix the solution. We can use the same initial conditions and diffusion coefficient as before, but now we need to solve Fick's second law for a much longer time: C(t,0.05) = C(0,0.05) erfc[(0.05)/(2 sqrt(D t))]
Plugging in the values, we get: C(2.4 years,0.05) = 0.5 g/cm^3
Converting to molarity as before, we get: C(2.4 years,0.05) = 0.5 g/cm^3 / 342.3 g/mol * 1000 g/L = 1.46 x 10^-3 M.

To know more about molarity click here

brainly.com/question/23686981

#SPJ11

The ocean's deep sound channel is characterized as a zone in which sound waves are able to propagate for long distances with minimal attenuation

It is  due to the unique properties of the water at that depth. The SOFAR layer is located at depths between 800 and 1200 meters, where the water temperature and pressure create a stable environment that allows sound waves to travel with little interference.

This layer acts as a barrier that traps and channels sound waves, allowing them to travel great distances without significant loss of energy. The unique acoustic properties of the SOFAR layer have important implications for oceanography, as it allows for the detection of distant underwater events such as earthquakes, volcanic eruptions, and the movements of marine mammals.

To know more about sofar layer click on below link :

https://brainly.com/question/1177283

#SPJ11

Thus, 0.19 mol or 190 mmol of NaOH will react completely with 50 mL of 1.9 M H2C2O4.

To determine how many mmol of NaOH will react completely with 50 mL of 1.9 M H2C2O4, we first need to find the mmol of H2C2O4:

moles of H2C2O4 = (1.9 mol/L) * (50 mL * (1 L / 1000 mL)) = 0.095 mol H2C2O4

Since the balanced equation for the reaction between NaOH and H2C2O4 is:

H2C2O4 + 2 NaOH → Na2C2O4 + 2 H2O

From the balanced equation, 2 moles of NaOH react with 1 mole of H2C2O4. Therefore, we can find the mmol of NaOH:

mmol of NaOH = 0.095 mol H2C2O4 * (2 mol NaOH / 1 mol H2C2O4) = 0.19 mol NaOH

Thus, 0.19 mol or 190 mmol of NaOH will react completely with 50 mL of 1.9 M H2C2O4.

Know more about Balanced Chemical Equation here:

https://brainly.com/question/28383671

#SPJ11

The major organic product formed from the reaction of 1-bromopropane with KOCH(CH3)3 is 1-propoxypropane.

The reaction involves a substitution reaction where the bromine atom of 1-bromopropane is replaced by the alkoxide group (OC(CH3)3) from potassium tert-butoxide (KOCH(CH3)3). The tert-butoxide ion is a strong nucleophile, attacking the electrophilic carbon of 1-bromopropane to form a new carbon-oxygen bond.

This results in the formation of 1-propoxypropane as the major product, where the tert-butoxide group replaces the bromine atom. The reaction occurs via an S_N2 mechanism, where the nucleophile attacks the substrate from the backside, resulting in inversion of configuration at the reaction center.

For more questions like Reaction click the link below:

https://brainly.com/question/28984750

#SPJ11

Each one of the following includes 0.150mol of solute in a 0.0025M HCI volume.

The space that an item takes up. It is normally assessed in cubic units and estimated and use a variation of formulas. A hexagonal bathtub that also is 1 foot tall, two feet wide, & 4 feet long, for example, has a quantity of 8 cubic meters.

Volumetric flasks, burettes, or pipettes designed for measuring amounts of liquid tend to be the most accurate, of tolerances of less than 0.02. Precision measurements are required in research and testing, and many testing vessels are already designed to login for liquid residue which clings in a flask.

To know more about volume visit :

https://brainly.com/question/24189159

#SPJ1

The order of increasing nucleophilicity in acetone is [tex]CH_3OH (b) < CH_3NH_2 (c) < CH_3SH (a).[/tex]

In acetone, the nucleophilicity of a species depends on its ability to donate a pair of electrons and react with an electrophile. The three species to consider are [tex]CH_3SH (a), CH_3OH (b), and CH_3NH_2 (c)[/tex]. To rank them in order of increasing nucleophilicity, we need to analyze their electron-donating abilities, which are influenced by factors such as the size of the atom, electronegativity, and the stability of the conjugate base.

a. [tex]CH_3SH[/tex]: The sulfur atom in [tex]CH_3SH[/tex] is larger and less electronegative than oxygen and nitrogen. This makes the electron cloud more dispersed, allowing it to donate electrons more easily.

b. [tex]CH_3OH[/tex]: The oxygen atom in [tex]CH_3OH[/tex] is more electronegative than sulfur and nitrogen. However, it is a relatively small atom, which leads to a higher electron density around the oxygen, resulting in reduced nucleophilicity compared to [tex]CH_3SH[/tex].

c. [tex]CH_3NH_2[/tex]: The nitrogen atom in [tex]CH_3NH_2[/tex] is less electronegative than oxygen but more electronegative than sulfur. It is also smaller than sulfur, resulting in a more concentrated electron cloud. However, its lower electronegativity compared to oxygen makes it a better nucleophile than [tex]CH_3OH.[/tex]

In conclusion, the order of increasing nucleophilicity in acetone is as follows: [tex]CH_3OH (b) < CH_3NH_2 (c) < CH_3SH (a).[/tex] This means that [tex]CH_3SH[/tex] is the strongest nucleophile among the three species, while [tex]CH_3OH[/tex] is the weakest.

For more such questions on Nucleophilicity.

https://brainly.com/question/29563504#

#SPJ11

Answer:

[tex]The \: systemic \: name \: of \: the \: \\ compound \: is[/tex]

Mercuric nitrate

hope it helps <3

Answer:

que es un compuesto ionico

The first  carbon in each glucose molecule has a linear molecular geometry; the second carbon in each glucose molecule has trigonal pyramidal molecular geometry; the third carbon has a tetrahedral molecular geometry; the fourth carbon has trigonal planar molecular geometry; and, the fifth carbon has tetrahedral molecular geometry.

The molecular geometry of maltose is complex due to the presence of multiple carbon atoms and different types of bonds.

Maltose is a disaccharide made up of two glucose molecules linked together by a glycosidic bond. Each glucose molecule has five carbon atoms. The molecular geometry around each carbon atom in maltose depends on the types of bonds and the number of lone pairs of electrons on each carbon.

a) The first carbon in each glucose molecule is part of a linear chain of atoms, so it has a linear molecular geometry.

b) The second carbon in each glucose molecule is bonded to three other atoms (two carbons and one oxygen) and has one lone pair of electrons. This arrangement results in a trigonal pyramidal molecular geometry.

c) The third carbon in each glucose molecule is bonded to four other atoms (three carbons and one oxygen) and has no lone pairs of electrons. This arrangement results in a tetrahedral molecular geometry.

d) The fourth carbon in each glucose molecule is bonded to three other atoms (two carbons and one oxygen) and has one lone pair of electrons. This arrangement results in a trigonal planar molecular geometry.

e) The fifth carbon in each glucose molecule is bonded to four other atoms (three carbons and one oxygen) and has no lone pairs of electrons. This arrangement also results in a tetrahedral molecular geometry.

To learn more about molecular geometry of maltose, visit: https://brainly.com/question/31044827

#SPJ11

the values we have, we get:percent yield = (32.12 g Fe/31.45 g Fe) × 100% = 102.1%

How to solve the problem?

The first step in determining the percent yield is to calculate the theoretical yield, which is the maximum amount of product that could be produced based on the amount of reactant used in the reaction. To calculate the theoretical yield, we need to use the balanced chemical equation and the molar mass of the reactant and product.

The balanced chemical equation for the reaction is:

Fe₂O₃ + 3H₂→ 2Fe + 3H₂O

From the equation, we can see that 3 moles of hydrogen gas react with 1 mole of iron oxide to produce 2 moles of iron and 3 moles of water. The molar mass of H₂ is 2.016 g/mol, and the molar mass of Fe is 55.845 g/mol.

Using this information, we can calculate the theoretical yield of iron as follows:

3.561 g H₂ × (1 mol H₂/2.016 g) × (2 mol Fe/3 mol H2) × (55.845 g Fe/mol Fe) = 31.45 g Fe

This means that if the reaction went to completion, we would expect to obtain 31.45 grams of iron.

The actual yield obtained in the lab was 32.12 grams of iron. The percent yield can be calculated using the following formula:

percent yield = (actual yield/theoretical yield) × 100%

Substituting the values we have, we get:

percent yield = (32.12 g Fe/31.45 g Fe) × 100% = 102.1%

The percent yield is greater than 100%, which suggests that there may have been some errors or losses during the experiment. This could be due to a number of factors, such as incomplete reaction, loss of product during handling, or measurement errors. It is important to identify and address these sources of error in order to improve the accuracy of the experiment and obtain more reliable results in future trials.

To know more about yield visit :-

https://brainly.com/question/28033398

#SPJ1

To complete and balance the following redox reactions in acidic and basic solutions, here are the balanced equations with proper phases for each species involved:

Redox reaction in acidic solution:

[tex]TeO_{2}(aq) + N_{2}O(g) = Te(s) + NO(g)[/tex]

Redox reaction in basic solution:

[tex]Cr2O_{72-}(aq) + Hg(0) = Hg_{2+} (aq) + Cr_{3+} (aq)[/tex]

Redox reaction in basic solution:

[tex]ReO_{4_}(aq) + Pb_{2+} (aq) = Re(s) + PbO_{2} (s)[/tex]

Redox reactions, also known as oxidation-reduction reactions, involve the transfer of electrons between chemical species. In a redox reaction, one species undergoes oxidation, which involves the loss of electrons, while another species undergoes reduction, which involves the gain of electrons.

The species that undergoes oxidation is called the reducing agent or reductant because it donates electrons, while the species that undergoes reduction is called the oxidizing agent or oxidant because it accepts electrons. Redox reactions involve a simultaneous occurrence of both oxidation and reduction.

For more details regarding redox reactions, visit:

https://brainly.com/question/28300253

#SPJ12

The beta decay product of Mo-98 (Molybdenum-98, atomic number 42) is Tc-98 (Technetium-98).

Here's a step-by-step explanation:

1. Mo-98 undergoes beta decay, where a neutron is converted into a proton and an electron (beta particle) is emitted.
2. As a result, the atomic number increases by 1 (from 42 to 43) and the element changes from Mo (Molybdenum) to Tc (Technetium).
3. The mass number remains the same (98), so the final product is Tc-98 (Technetium-98).

So, the correct choice among the given options is Tc-98.

To learn more about beta decay, visit:

https://brainly.com/question/31394531

#SPJ11