The part of the solution that is the bigger proportion of the solution is the _________.

Answer:

it is damp moist and other things

Explanation:

Yes, this small amount of water will have effect on the determined value for the concentration of the acid.

Even small amount of water causes an error because the drops of water add to the volume of base, diluting it slightly. This means it will take more base solution to neutralize the acid. This makes it seem as if the acidic solution was of stronger concentration than it actually was.

Method of quantitative analysis for determining the concentration of an acid or base by neutralizing it exactly with a standard solution of base or acid having known concentration is known as an acid–base titration

To know more about titrations of base in acid, refer

https://brainly.com/question/23687757

#SPJ4

Thus we can see that if we leave the lid off our setup for the calibration which would allow some heat to escape to the atmosphere. This will yield a lower specific heat value

What is calibration ?

One of the fundamental methods required to ensure instrument accuracy is calibration. Calibration is the process of arranging an instrument to produce a result within an acceptable range for a sample. A major part of instrumentation design is eliminating or limiting causes that produce faulty measurements.

For today's tests, we leave the lid off our setup for calibration, allowing some heat to escape to the atmosphere. This results in a lower specific heat value.

For example, if the real value of Q before we remove the lid is 100 J, our calibration setup is 100 J.

And the metal mass is 10 g.

And the temperature has risen by 5 degrees Celsius.

Q = mcdT

Now, compute the value of C:

100 J = 10 g*C* 5C

C= 2 J / g-c

Now that the lid has been opened, some of the heat has escaped into the atmosphere,

and we have Q = 90 J.

Then;

Q = mcdT

Now, compute the value of C:

90 J = 10 g*C* 5C

C= 1.8J / g-c

Thus we can see that if we leave the lid off our setup for the calibration which would allow some heat to escape to the atmosphere. This will yield a lower specific heat value

Learn more about calibration from given link

https://brainly.com/question/787793

#SPJ4

The heat capacity of 185g of liquid water is 4.421 J/g°C

Heat capacity is defined as the amount of heat energy required to raise the temperature of a given quantity of matter by one degree Celsius

Here given data is

Mass =  185g

We have to calculate the heat capacity = ?

So the formula is

q = m×c×ΔT

c = ?

q =  4.184 J

m = 185g

ΔT = 100°C

c =  m× ΔT/q

c =  185g ×100°C/ 4.184 J

c = 4.421 J/g°C

Heat capacity of 185g of liquid water is 4.421 J/g°C

Know more about heat capacity

https://brainly.com/question/13411214

#SPJ1

The formulas of each of the compounds are;

1) AlN

2) [tex]NH_{4} ^+[/tex]

3) [tex]C_{3} H_{8}[/tex]

The term chemical formula has to do with the representation of a compound. We know that the way that a compound is represented would help us to be able to identify the compound.

We have various compounds that have been shown in the image and we are asked to find the correct formula of the compound. We now look at the number of atoms that we have in each of the diagrams and by means of the number of atoms, we would look to see how we can be able to find the chemical formula of the compound.

By the octet rule, aluminum can combine with nitrogen to form aluminum nitride. The combination of nitrogen with four hydrogen atoms would only lead to the formation of a charged ammonium specie. A structure that contains three carbon atoms and eight hydrogen atoms can only be propane as shown.

Thus, when we see the arrangement of the atoms we now have to look at the possible compound that could be found from the arrangement shown and then write down the formula of the compound as shown.

Learn more about chemical formula:https://brainly.com/question/29031056

#SPJ1

The woven cloth is a good choice for modeling a cell membrane because cell membranes are semipermeable, which means some particles can cross the cell membrane while others cannot. Unlike the plastic bag, the woven cloth is semipermeable: for the woven cloth, small particles/liquids can pass through it while larger objects cannot. However, nothing is able to pass through the plastic bag, so the plastic bag is not semipermeable (it's impermeable).

The mass of oxygen reacted with magnesium is 8 grams.

The formula mass of a substance is defined as the sum of the atomic masses of constituent atoms that are present  in a compound. This is generally used for compounds which do not contain discrete molecules, and  ions as their constituent units.

The combustion reaction of magnesium is as follows

2Mg + 02 + heat → 2MgO

Molar mass of MgO = 24.32 g/mol

Mole of Mg in 12g = 12 ÷ 24.32 = 0.4934 mol

From the balanced reaction we can see that the mole ratio of Mg to O2 is 2:1.

Therefore for 0.4934 mol of Mg, mole of 02 required will be = 1/2 × 0.4934 = 0.2467 mol.

Molar mass of O2 = 32g/mol

Hence the mass of O2 required = 0.2467 × 32 = 7.89g

By the conservation of mass; Mg + Oxygen = MgO

Mass of Mg = 12g

Mass of MgO = 20G

Therefore the mass of oxygen reacted with Mg will be = (20-12) = 8 grams

To know more about mass

https://brainly.com/question/11291297

#SPJ4

Answer:  The radius of atoms increases as you move down a particular group in the periodic table of elements because an atom grows larger as the number of electronic shells increases.

Explanation:

https://chem.libretexts.org/Bookshelves/Physical_and_Theoretical_Chemistry_Textbook_Maps/Supplemental_Modules_(Physical_and_Theoretical_Chemistry)/Physical_Properties_of_Matter/Atomic_and_Molecular_Properties/Atomic_Radii

The Compare and contrast of metallic and ionic bonds is given below.

Ionic and metallic bonds take occur between positive and negative ions, whereas ionic bonds take place between positive ions and electrons. This is the main distinction between the two types of bonds.

Ions, which are made up of a positive and a negative ion, are created when two atoms exchange electrons. Atoms sharing electrons to form a molecule result in covalent bonds. Metal atoms shed their outermost electron to produce positively charged ions, which then form metallic bonds.

Metal ions are attracted to delocalized or free e, forming metallic connections as a result. whereas ionic bonds are created by electron transfer from one atom to another.

Similar to ionic bonds, where the removal of electrons results in the formation of ions, metallic bonds include the removal of electrons to create a sea of electrons.

Later, these electrons are used or shared by each and every atom, and in covalent bonds, two atoms share one electron. Consequently, metallic bonds resemble both ionic and covalent bonds.

Ionic and metallic solids differ significantly in that metallic solids contain metal atoms and free electrons while ionic solids mostly comprise cations and anions.

Additionally, metallic solids feature metallic bonds rather than the electrostatic attraction forces between cations and anions that exist in ionic solids.

Learn more about ionic bonds from

https://brainly.com/question/2687188
#SPJ1

The following molecules is thought to have been absent from the primitive reducing atmosphere of early earth is oxygen , O₂.

The primitive earth of the atmosphere is consist of the hydrogen that will combined to the oxygen atoms, and for the water molecules H₂O and leaving the no hydrogen left free. that mean the the primitive reducing atmosphere of the early earth is oxygen , O₂. the original earth atmosphere is rich in methane , water vapor and ammonia.

Thus, The following molecules is thought to have been absent from the primitive reducing atmosphere of early earth is oxygen , O₂.

To learn more about earths atmosphere here

https://brainly.com/question/1267862

#SPJ4

The moles of CO₂ that can be formed from each reactant are:

The  equation of the combustion of methane is given below as follows:

CH₄ (g) + 2 O₂ (g) ---> CO₂ (g) + 2 H₂O (g)

From the equation of the reaction, 1 mole of methane reacts with 2 moles of oxygen to produce 1 mole of carbon dioxide ad 2 moles of water.

Given that there are 2 molecules of CH₄ reacting with 5 molecules of O₂. the moles of CO₂ that can be formed from each reactant are determined from the mole ratio of the reactants and products as given in the equation of the reaction.

2 moles of methane will produce 2 moles of CO₂

5 moles of O₂ will produce 5 * 1/2 moles of CO₂ = 2.5 moles of CO₂

Learn more about mole ratio at: https://brainly.com/question/19099163

#SPJ1

In quasi-chemical theory of solutions, the enthalpy of mixing of the system can be expressed, the fraction of B (Xb) in the system will be 0.0729

ΔH = XaXb (7500 Xa + 18200 Xb)

Bond energies are as:

eaa = -6.5 × 10⁻²⁰

ebb = -5.3 × 10⁻²⁰ J/mol

eab = -5.4 × 10⁻²⁰ J /mol

The charge in internal energy will be

    Δe = eab - 1/2 (eaa + ebb)

    Δe =  -5.4 × 10⁻²⁰ J /mol - 1/2 (-6.5 × 10⁻²⁰ -  (-5.3 × 10⁻²⁰  J/mol)

    Δe = 6.4 × 10⁻²⁰

enthalpy of mixing will be

    ΔH mix = N₀.Z.XaXbΔe

    ΔH mix = 6.0221 × 10²³ × 4 × Xa.Xb × 6.4 × 10⁻²⁰       (2)

We have

    ΔH = XaXb (7500 Xa + 18200 Xb)        (1)

(1) = (2)

    154.165 × 10³ = 7500 Xa + 18200 Xb

As Xa = 1 - Xb

put in above eq.

    154.165 × 10³ = 7500 (1 - Xb) + 18200 Xb

    146665 = 10700 Xb

    Xb = 0.0729

So fraction of B(Xb) = 0.0729

(Complete question is attached)

You can also learn about the quasi-chemical theory from the following question:

https://brainly.com/question/14284453

#SPJ4

The concentration of a solution expressed in moles of solute per 1L of solution is called either the molarity or the molar concentration.

A solution is a homogenous mixture of one or more solutes dissolved in solvent. An example of solution is salt and water.

The most common way to express solution concentration is molarity(M) which is defined as the amount of solute in moles divided by the volume of solution in liters.

Molar concentration is a measure of the concentration of a chemical species.

To know more about molarity click here:

https://brainly.com/question/16727614

#SPJ4

The balanced equation of the reaction and the reaction types are given below as follows:

a. C₃H₈ +   5 O₂ → 3 CO₂ + 4 H₂O Reaction Type: Combustion

b. Ca +  Mg(NO₃)₂ → Mg + Ca(NO₃)₂ Reaction Type: Single replacement

d. 4 Na +  O₂ → 2 Na₂O Reaction Type: Oxidation or combination

e. 2 MgO → 2 Mg + O₂ Reaction Type: Decomposition

f. 2 K +  Cl₂ → 2 KClReaction Type: Synthesis

Chemical reactions are reactions in which chemical changes occur in one or more substances resulting in the formation of new substances.

Chemical changes that occur during chemical reactions are not easily reversible.

There are several types of chemical reactions and they include the following:

Learn  more about chemical reactions at: https://brainly.com/question/16416932

#SPJ1

The enthalpy required to heat 50 g of liquid ethanol from 23 °C to ethanol vapor at 78.3 °C is 50. kJ.

We want to heat 50 g of liquid ethanol from 23 °C to ethanol vapor at 78.3 °C. We can divide this process in 2 parts:

Heating of liquid ethanol from 23 °C to 78.3 °C (boiling point).

Vaporization of ethanol at 78.3 °C.

1. Heating of liquid ethanol from 23 °C to 78.3 °C

The amount of heat required for this part (Q₁),

Q₁ = c × m × ΔT

Q₁ = (2.46 J/g °C) × 50 g × (78.3 °C - 23 °C) × (1 kJ/1000 J) = 6.8 kJ

where,

c = specific heat of liquid ethanol.

m = mass of ethanol.

ΔT = change in the temperature.

2. Vaporization of ethanol at 78.3 °C.

The amount of heat required for this part (Q₂),

Q₂ = (m/M) × ΔH°vap

Q₂ = [50 g/(46.07g/mol] × (39.3 kJ/mol) = 43 kJ

where,

m = mass of ethanol.

M = molar mass of ethanol.

ΔH°vap = enthalpy of vaporization of ethanol.

The total amount of heat required (Q) = the sum of the heat required in each step.

Q = Q₁ + Q₂ = 6.8 kJ + 43 kJ = 50. kJ

Let the process is carried out at constant pressure and the enthalpy required for the process = 50. kJ.

The enthalpy required to heat 50 g of liquid ethanol from 23 °C to ethanol vapor at 78.3 °C is 50. kJ.

To know more about ethanol

https://brainly.com/question/25002448

#SPJ4

Arrangement of the solution By increasing order of molarity, is

  option (a) < option (d) < option (b) < option (f) < option (c) < option (e)

Molarity is the amount of a substance in a certain volume of a solution. It is expressed as mole of the solute per liter of the solution. It is also known as molar concentration of the solution.

1M NaCl has, (1M Nacl/1L) . (1 molcl/1 mol) =1M.so the molarity of the  Nacl is 1M.

1M FeCl3 have, ( 1M FeCl3 /1L ). (3 mol Cl /1 mol) = 3M. So. the molarity of the 1M Fecl3 is 3M.

5 m Nacl has, (5m Nacl/1l) . (1 mol cl/1 mole) =5M it has the molariry of 5M.

1M Cacl2 has, (1M Cacl2/1L) . (2mol cl/1 mole) = 2 mol. so it has the molarity of 2M.

2M Fecl3 has, (2M Fecl3 /1L) . (3mol cl/1 mole) = 6M. it has the molarity of 6M.

2M Cacl2 has, (2M Cacl2/1L) . (2mol cl /1 mole)=4M.The molar concentration of this is 4M.

hence, the solutions are arranged in increasing order.

To learn more about molar concentration please visit:

https://brainly.com/question/26255204

#SPJ4

A. None of these is a true statement because

Phosphorus has 5 electrons in its outermost shell

Arsenic has 5 electrons in its outermost shell

Boron has 6 electrons in its outermost shell

Silicon has 4 electrons in its outermost shell

A mineral called phosphorus is found in many foods naturally and can also be taken as a supplement. It is a crucial component of cell membranes, bones, and teeth. It maintains a normal range of blood pH and aids in the activation of enzymes.

Many countries' groundwater naturally contains large amounts of arsenic.

Inorganic arsenic is extremely poisonous.

The greatest threat to public health from arsenic comes from contaminated water used for drinking, food preparation, and irrigation of food crops.

The only non-metallic element in group 13 of the periodic table is boron. Boron lacks electrons and has an empty p-orbital. Amorphous boron, a dark powder that is inert to oxygen, water, acids, and alkalis, is the most prevalent form of boron.

Chemical element silicon has the chemical symbol Si and atomic number 14. It is a tetravalent metalloid and semiconductor that has a blue-grey metallic sheen and is a hard, brittle crystalline solid. It belongs to the periodic table's group 14.

For more information on Electrons, visit :

https://brainly.com/question/13315361

#SPJ4

Answer:

86.06 amu is the average atomic mass of element Zz.

Explanation:

We may find the average atomic mass of Zz with a simple thought experiment.  Let's imagine that we were given 100.0 grams of Zz.  We know that 87.20% of that 100.0 grams is an isotope having 85.96 AMU (atomic mass units).  That means the other 12.80% must be the isotope with 86.78 AMU.

Since we picked 100.0 grams, it is easy to see that we would have:

87.2 grams of 85.96 AMU, and

12.8 grams of  86.78 AMU

-----------

100.0 grams total

The contribution of each isotope can be calculated by taking it's percent abundance times it's AMU andf then adding the total results:

AMU        %       Contribution to total AMU

85.96      87.2       74.96

86.78       12.8        11.11

--------      ---------      -----------

               100.0      86.06 amu

The sum of the two weighted averaged amu numbers is the average atomic mass of element Zz.  [Element Zz has a good futire as a sleep aid.]

The mass of ammonia that can be produced from the reaction of 74.2 g of N₂ and 14.0 moles of H₂ is 90.1 g.

The mole ratio of the reaction for the production of ammonia is obtained from the balanced equation of the reaction as follows:

Equation of the reaction: N₂ (g) + 3 H₂ (g) → 2 NH₃ (g)

The mole ratio of the reactants nitrogen and hydrogen is 1 : 3

Moles of nitrogen in 74.2 g of nitrogen = 74.2/28

Moles of nitrogen in 74.2 g of nitrogen = 2.65 moles

Moles of hydrogen present = 14.0 moles

The limiting reactant is nitrogen

Mole ratio of nitrogen to ammonia is 1 : 2

Mass of ammonia produced = 2.65 * 2 * 17 g

Mass of ammonia produced =  90.1 g

Learn more about mole ratio at: https://brainly.com/question/19099163

#SPJ1

The products of an exothermic reaction likely to be warmer than the reactants because in this reaction energy produced is released as heat.

An exothermic reaction is a reaction in which energy is released in the form of light or heat. So, in an exothermic reaction, energy is transferred into the surroundings rather than taking energy from the surroundings as in the case of endothermic reaction.

We can also say that the exothermic reactions are the ones that actually release heat after the chemical reactions. For example matching a light using a matchstick is one example of this type of reaction where the release of energy  is in the form of both heat and light.

So, in these kinds of reaction the products of these reactions are more likely to me warmer than the reactants.

To know more about exothermic reaction

https://brainly.com/question/17022982

#SPJ4

The Pcl6 has 48 bonded electrons and 18 lone pairs.

The Lewis structure of Pcl6 is as follows: -

Phosphorous is bonded with 6 chlorine atoms with 18 lone pairs.

Lewis structures, also known as Lewis dot formulas, Lewis dot structures, electron dot structures, or Lewis electron dot structures (LEDS), are diagrams that show the bonding between atoms of a molecule, as well as the lone pairs of electrons that may exist in the molecule. [1][2][3] A Lewis structure can be drawn for any covalently bonded molecule, as well as coordination compounds.

    In Lewis structure, atoms are bonded with single bonds. If total number of electrons are 't' and number of bonds are 'n', then t-2n number of electrons are to be placed. Once the central atom is placed, they need to complete the octet rule.

Learn more about Lewis-dot structure from,

https://brainly.com/question/18083461

#SPJ4

The temperature at constant volume is 0.311, The temperature at constant pressure is 5.133.

What is mixture?

A mixture in chemistry is a compound composed of two or more chemical components that are not chemically linked. A mixture is a physical combination of two or more substances that retain their identities and are blended as solutions, suspensions, or colloids.

GIVEN :

Air = 200%

p = 77f, 1 atm

PV=nRT

1*200/100 = 12(77)T

= 0.3311

1*80/100 = 12(77)T

= 5.133

To learn more about Mixture, from the given link:

https://brainly.com/question/24647756
#SPJ4

Florine is our least similar and cesium is our most similar in melting point.

Melting point is the temperature at which the solid and liquid forms of a pure substance will  exist in equilibrium. As heat is applied to a solid, its temperature will increase till the melting point is reached.

If we apply more heat then it will convert the solid into a liquid with no temperature change. Now when all the solid has melted, additional heat will raise the temperature of the liquid. The melting temperature of crystalline solids is a very characteristic figure and it is used to identify pure compounds and elements.

From the melting point data we can say that florine will be least similar to rubidium and cesium will be most similar to rubidium.

To know more about melting point.

https://brainly.com/question/28902417

#SPJ4

Answer:

Yes

Explanation:

Metals can bond with each other, both on a macroscopic level and on a molecular level. The former is found in any piece of metal, which is held together by metallic bonding. This can be more than one metal in the case of alloys, which are an intimate mixture of two or more different metals.

Answer:

D) Compound D

Explanation:

The bond energy is the highest amount the listed bond energies and this is one of the characteristics of ionic compound because usually its involves the formation of anions and cations with the former being negative and the latter being positive.

The bond is usually strong because it is involves attraction between actions and anions. It requires transfer of electron between metals and nonmetals. The metals are usually the cations (lose electron) and nonmetals are usually the anions ( they gain electron) so when they are dissolve in water they dissociate into negative and positive ions and carries electrical charges while in solid form they are insulators example is NaCl

Answer:

Compound D

Explanation:

True, the greater the lattice energy, the greater the charges on the participatory ions and the smaller their radii.

Lattice energy is the term used to describe the energy created when two gaseous ions with opposing charges are drawn to one another and eventually form an ionic bond.

Due to the tight bonding of ionic bonds, lattice energy is always positive and typically has a brittle crystalline structure.

They are not easily deformed due to the presence of a strong electrical link, and because of the arrangement of ions, they melt at a very high temperature.

As lattice energy rises, ionic bond strength rises as well. Additionally, the size or radius of the ions as well as the charge of the ions affect the lattice energy.

Learn more about the lattice energy here:

https://brainly.com/question/13169815

#SPJ4

The rank of the species by radius from largest to smallest:                    [tex]S^{2-} > Cl^{-} > Ar > K^{+} > Ca^{2+}[/tex]

All Ions are isoelectronic, which means the elements can have the same number of electrons but, their radii would be different because they have different nuclear charges. Atomic radii can be predicted easily. The atomic radii in the periodic table increase from top to bottom coming from left to right.

The cation with a greater positive charge will have a small radius due to the great attraction of electrons. The Anion with a greater negative charge will have a large radius due to the less attraction of electrons. Therefore, the ion will expand in size due to the net repulsion of the electrons.

To know more about Ranking the species by radius from largest to smallest at:

https://brainly.com/question/19032815

They are identical conformation of the same molecule.The groups which are pointed up are represented with wedge bonds and the groups which

are pointed down are represented with dash bonds.

One type of wire bonding called wedge bonds uses ultrasonic force and power to forge bonds. In the semiconductor industry, it is a well-liked and frequently applied technique. a mark that represents the location of a bond or group in relation to the paper or screen's surface. When a wedge is solid, it means that this bond or group is projecting outwards toward the observer. This bond or group is moving farther away from the viewer when the wedge is broken (hashed). A clamped piece of wire is coupled under a bonding tool (referred to as a wedge) and a bond pad during wedge bonding. A first wedge bond is created by applying pressure and ultrasonic energy for a predetermined amount of time.

Learn more about  wedge bonds here:

https://brainly.com/question/13844043

#SPJ4

The chemical bond that is most polar is, p-f. Correct answer: letter B.

The p-f bond is the most polar bond because it has the largest electronegativity difference between the two atoms. This means that the p-f bond will have a higher dipole moment than any other type of bond.

The p-f bond is formed when the p orbitals of two atoms overlap. The p orbitals are larger than the s orbitals, so the p-f bond is larger than the s-f bond. The p-f bond is also stronger than the s-f bond because the p orbitals are closer to the nucleus than the s orbitals.

Learn more about chemical bonds polares:

https://brainly.com/question/25150590

#SPJ4