The linear velocity with which the wheel must rotate is 7.48 m/s.
The wheel of a car needs to generate a total kinetic energy of 401.0 n to keep the car moving.
If the wheel weighs 6700 g, find the linear velocity with which it must rotate.
Consider the wheel to be a flat cylinder.
Assuming you want the final answer in terms of velocity, we can use the equation:
KE = 1/2×mv²
where KE is the kinetic energy, m is the mass, and v is the velocity.
We can rearrange this equation to solve for velocity ,
v = sqrt(2×KE/m)
Now we just plug in the known values and solve:
v = sqrt(2×401.0 n/6700 g)
v = 7.48 m/s
Hence , the linear velocity with which the wheel must rotate is 7.48 m/s.
Learn more about kinetic energy at : https://brainly.com/question/26472013
#SPJ4
a 150kg monkey hangs from a cord suspended from the ceiling of an elevator. the cord can withstand a tension of 200N and breaks as the elevator accelerates. what was the elevators minimum acceleration (in magnitude and direction,
Answer:
The elevator moves up with an acceleration of 3.5 m/s²
Explanation:
Given:
m = 15 kg (not 150!! :))
Tmax = 200 N
g = 9.8 m/s²
____________
a - ?
The elevator moves up with an acceleration a:
Tmax = m·(g + a)
g + a = Tmax / m
a = Tmax / m - g
a = 200 / 15 - 9.8 ≈ 3.5 m/s²
a square coil, enclosing an area with sides 6.4 cm long, is wrapped with 3,038 turns of wire. a uniform magnetic field perpendicular to its plane is turned on and increases to 0.47 t during an interval of 1.2 s. what is the magnitude of the induced voltage in the coil?
The induced voltage in the coil is 0.25 V.
What is voltage?Voltage is the pressure from the power source in an electrical circuit that forces charged electrons (current) through conducting coil , causing the electrical circuit, etc. to do work. Let the light shine. An example of a DC voltage is the potential difference across the terminals of an electrochemical cell. AC voltage is present across the terminals of a typical power outlet. Voltages create electrostatic fields even when charge carriers are not moving. A volt is a unit of potential difference, which is also called voltage. A magnitude of 1 volt is officially defined as the potential difference between two points on a cable that will carry 1 ampere of current when 1 watt of power is dissipated in the cable.To learn more about voltage from the given link :
https://brainly.com/question/13521443
#SPJ4
a 71 kg student weighs himself by standing on a scale mounted on a skateboard that is rolling down an incline, as shown. assume there is no friction so that the force exerted by
Answer:
The student would definitely weigh lower than 71 kg when the student rolls down the incline on their skateboard. This is because as he goes down, there will be air pushing against him, and though it isn't enough to fully lift him, the air pressure is enough to decrease the student's original weight. It mainly depends on how steep the incline is; if the incline is just enough to get him going, then the bar will show just a bit less than 71 kg after a while. However, if the student goes down a much steeper incline, say something like just a bit further out than a wall at 90 degrees, then the student will most probably have a much less weight than 71 kg.
Kinda long, but hope it helps.
A woman is pushing a 100Kg couch across her room. Her arms are angled down at 25 degrees
from the horizontal as she applies a 70N force. What is the normal force applied to the couch?
The normal force applied to the couch is 70.42N
Given,
Mass(m)- 100kg
Force(f)- 70N
Angle(a)- 25 degrees
We know,
Acceleration(n): force/mass
so, n = 70/100
= 0.7
now,
Normal Force = mn + sin a
so,
= 0.7*100 + 0.42
= 70 +0.42
70.42N
What is mass?
The amount of matter in a particle or object is represented by the dimensionless quantity mass (symbolised m). The kilogramme is the International System's (SI) preferred unit of mass (kg).What is force?
The term "force" has a specific meaning in science. At this level, calling a force a push or a pull is quite appropriate. A force is not something an item "has in it" or that it "contains." One thing experiences a force from another. There is no distinction between living and non-living entities in the concept of a force.To know more about force, checkout this link.
https://brainly.com/question/12970081
#SPJ1
A string is wrapped around a pulley with a radius of 2. 0 cm. The pulley is initially at rest. A constant force of 50 n is applied to the string, causing the pulley to rotate and the string to unwind. If the string unwinds 1. 2 m in 4. 9 s, what is the moment of inertia of the pulley?.
The moment of inertia of the pulley if a string is wrapped around a pulley with a radius of 2.0 cm and a constant force of 50 N is applied to the string is 0.2 kg m²
s = ut + 1 / 2 at²
u = 0
s = 1.2 m
t = 4.9 s
1.2 = 0 + 1 / 2 * a * 4.9²
1.2 = 12.01 a
a = 0.0999 m / s²
a = r α
a = Tangential Acceleration
α = Angular Acceleration
r = 2 cm = 0.02 m
α = a / r
α = 0.0999 / 0.02
α = 4.995 rad / s²
I = τ / α
τ = r F
I = Moment of inertia
τ = Torque
F = Force
F = 50 N
τ = 0.02 * 50
τ = 1 N m
I = 1 / 4.995
I = 0.2 kg m²
Therefore, the moment of inertia of the pulley is 0.2 kg m²
To know more about moment of inertia
https://brainly.com/question/15246709
#SPJ4
Zn + HCl →ZnCl2 + _____H₂
type of reaction, and what is it balanced??
Answer:
Explanation:
Zn + 2 HCl → ZnCl₂ + H₂
The interaction of metals with acids refers to the substitution reaction
[tex]{ \green{ \boxed{ \red{ \sf{ \underline{Chemical \: displacement \: reaction}}}}}}[/tex]
The reaction between zinc and hydrochloric acid gives zinc chloride and liberates hydrogen gas.
The balanced chemical equation is as below.
[tex]{ \purple{ \sf{Zn + 2HCl{ \to}Zn Cl_{2} + H _{2}↑}}}[/tex]
in the united states , the energy sourced used predominantly for the production of electricity is .
Coal, natural gas, petroleum, and other fossil fuels made up about 61% of the electricity produced in this country. Nuclear energy made up over 19% of the total energy, while renewable energy made up about 20%.
Decomposing plants and animals are used to create fossil fuels. These fuels, which are located in the crust of the Earth, contain hydrogen and carbon that can be burned to produce energy. Examples of fossil fuels include coal, oil, and natural gas. The term "fossil fuel" refers to a hydrocarbon-containing substance that is naturally formed in the Earth's crust from the remains of extinct plants and animals and is extracted and burned as fuel. Natural gas, crude oil, and coal are the principal fossil fuels. We rely on those fuels to heat our homes, power our cars, run manufacturing and industrial processes, and give us electricity. To produce electricity, we burn, or combust, fossil fuels. The process of burning material to produce electrical energy is known as thermal generation. Combustion itself does not result in the production of electricity. Large water boilers are heated by the burning of coal or oil.
Learn more about fossil fuels here:
https://brainly.com/question/2029072
#SPJ4
a parallel plate capacitor has a cross-sectional area of 25.8 x 31.1 mm and a plate separation of 0.19 mm. what is the dc capacitance, in pf, if the material inserted in between the plates has a dielectric constant of 3.8 ? (answer format x.x)
The dc capacitance is 1420.84.
What exactly is DC capacitance?The way a capacitor behaves in a DC circuit
An uncharged capacitor has zero voltage in terms of DC voltage, which is the same as a short circuit. When the capacitor is fully charged, the circuit has no current flowing. An open circuit is therefore what a fully charged capacitor appears to dc to be.
Parallel plate capacitor ,
Area= (25.8 X 31.1) mm²
plate separation = d= 0.19 mm.
Er = dielectric constant = 3.8
Converting all the values in SI unit meter.
Area = 25.8 x 31.1/(10⁻³)²
Area = 802.38/10⁻⁶
Area = A= 0.0080238 m².
Now, d = 0.19mm =0.00019m
Er = 3.8
for parallel plate capacitor, the capacitance is given by
C = E₀ErA/d , where E = 8.85×10⁻¹²F/m.
C = 8.854 x 10⁻¹²X3.8X 0.0080238/0.00019
C =0.26996x 10⁻¹²/0.00019
C =1420.84x 10⁻¹²(10⁻¹² represent Pico and unit of capacitance is farad).
C = 1420.84
To know more about dc capacitance visit:
https://brainly.com/question/24111770
#SPJ4
(a) calculate the self-inductance of a 54.0 cm long, 10.0 cm diameter solenoid having 1000 loops. mh (b) how fast can it be turned off if the induced emf cannot exceed 3.00 v and a current of 22.0 a flows through this inductor? s
Self-inductance is 23.4 mH 0.145 seconds it is turned off it be turned off if the induced EMF cannot exceed 3.00 v and a current of 22.0 a flows through this inductor.
What is Self-inductance?As the current in the coil changes, the magnetic flux associated with the coil also changes, thus inducing an electromotive force in the coil. This phenomenon is referred to as self-induction. Self-induction of a coil is a property due to its tendency to maintain a magnetic flux associated with it and to counteract changes in magnetic flux by inducing current. This property of coils is similar to mechanical inertia. That is why self-induction is called electric inertia. The self-inductance of a coil is numerically equal to the amount of magnetic flux associated with the coil when a unit current flows through it. The SI unit for self-inductance is the henry (H) or weber per ampere. 1H = 1Wb/A.to learn more about Self-inductance from the given link :
https://brainly.com/question/28167218
#SPJ4
if the actual thermal efficiency of the plant is 60% of the maximum, at what rate must heat be discarded to the rive
If the actual thermal efficiency of the plant is 60% of the maximum is Heat capacity of water is 4.2 kJ/kgK so the temperature rise is 2.53 K
The maximum efficiency is that of Carnot engine. Let's suppose the
power plant is Carnot engine, so
n=1 -Tc/Th
=1-293.15/588.15
=0.5
(b) The actual efficiency is 60% of the maximum so
n = 0.6 . 0.5
= 0.3
Heat capacity of water is 4.2 kJ/kgK so the temperature rise is
ΔT= 1750 . 10³ kJ/s / 165 . 10³ kg/s . 4.2 kJ/kgK
ΔT =2.53 K
In thermodynamics, a device's thermal efficiency is a dimensionless performance metric. Examples of such devices include internal combustion engines, steam turbines, steam engines, boilers, furnaces, refrigerators, and air conditioners. A system's thermal efficiency is determined by how much work is produced for every unit of heat input. Work is produced by heat engines. The percentage of heat that is converted into useful work is expressed by thermal efficiency. The carbon footprint of a building is significantly decreased by an envelope that is thermally efficient.
Learn more about temperature here:
https://brainly.com/question/29056986
#SPJ4
a student lifts a weight of 10.0 n a distance of 0.5 meters. if this exercise is repeated 50 times in 100 seconds, then the power of this exercise is: a. 2.5 watts. b. 3.1 watts. c. 3.6 watts. d. 4.0 watts. e. 4.8 watts.
The option E is correct. 4.8 watts, The quantity of energy moved or converted per unit of time is known as power in physics. The watt, or one joule per second, is the unit of power in the International System of Units.
Power is also referred to as activity in ancient writings. A scalar quantity is power. Power is an expression of energy expended through time (effort), of which force is an element, as opposed to force itself, which is the fundamental outcome of an interaction between two objects. Power can be measured and described, but a force is a real physical entity, but power is not. W = mgh
=10*9.8* 0.5
=49 newton
P= W/T
=49/ 100
=4.8 watts
Learn more about power here-
https://brainly.com/question/9605409
#SPJ4
calculate the minimum number of 15-ampere lighting branch circuits required in a residence of 1,850 square feet.
4 number of 15-ampere lighting branch circuits required in a residence of 1,850 square feet.
since we are provided with 15-ampere branch circuits, and the measurement for the residence is 1850 square feet .So first,
=>3 volt ampere x 1,850 /120 volts
=> 5,550 volt-amperes/120 volts
=> 46.25 amperes
Now we will divide the above value by the number of branch circuits
=>46.25/15 amperes = 3.08 = 4
So almost 4 branches are required for the given feet of a residence
To know more about ampere refer to the link https://brainly.com/question/1476646?referrer=searchResults.
#SPJ4
the wheel is composted of a 10 kg hoop stiffened by 4 thiin spokes, each with a mass of 2 kg. a horizontal force of 40 n is applied to the wheel initially at rest. calculate the angular velocity of the wheel after its center has moved 3 m
The Angular velocity is 1.165 rad/s.
What is horizontal force?
Horizontal force is defined as a force applied in a direction perpendicular to the horizon. There are two parts to the force applied to a body: a horizontal component as well as a vertical component. The horizontal component of a force, as its name implies, is directed parallel to the surface, while the vertical component is directed perpendicular to a position of the body. In nature, almost all moving things have both vertical and horizontal components of force.
F = 40 N
m= 10 kg = 98.1 N
r= 0.3 m
Circumference of circle = 1.884 m
The Centre of the circle moves 1.884 m then the angle of rotation is 360
Applying the circle arc length formula (s = r θ)
s= 3 -1.884 = 1.116m
θ= 2310
F = m x v2 /r
V = sqrt(F x r/m)
= sqrt(40 x 0.3 / 98.1)
= 0.35 m/s
Angular velocity ω,
= v/r
= 0.35/0.3
=1.165 rad/s
Hence, the angular velocity is 1.165 rad/s
To learn more about angular velocity the link is given below:
https://brainly.com/question/27096011?
#SPJ4
To an observer on earth, the sun appears brighter than the star rigel because the sun is.
To an observer on earth, the sun appears brighter than the star Rigel because the sun is closer than Rigel.
Distance between the Sun and Earth = 147.85 millions km
Distance between the star Rigel and Earth = 864.3 light years
1 light year = 9.46 * [tex]10^{12}[/tex] km
864.3 light years = 9.46 * 864.3 * [tex]10^{12}[/tex] km
864.3 light years = 8176.278 * [tex]10^{12}[/tex] km
864.3 light years = 817.63 * [tex]10^{7}[/tex] million km > 147.85 millions km
Clearly the distance between the Sun and Earth is way lesser than the distance between the star Rigel and Earth. Larger the distance smaller the size it will appear and lesser the light that can be seen.
Therefore, to an observer on earth, the sun appears brighter than the star Rigel because the sun is closer than Rigel.
To know more about distance between the Sun and Earth
https://brainly.com/question/190924
#SPJ4
identify the component that converts direct current (dc) into the alternating current required to power the electric motors.
A component that converts direct current (dc) into alternating current (ac) is an inverter.
The electrical current in direct current (DC) only flows in one direction. The electrical current in alternating current (AC) can flow in both ways. The electrons in AC can switches back and forth at some intervals. The inverter is a device that can offer precise variable control of the speed of a motor and it changes the direct current (DC) to alternating current (AC).
The inverter has a part that is like an electronic circuit that regulated voltages to work, so we can convert DC to AC, and we can change back into DC again.
Learn more about Inverter here: https://brainly.com/question/28641690
#SPJ4
radiation dosages based on potential damage is in group of answer choices a. rads. b. joules. c. rems. d. none of the above
Using the theories of radiation dosages, we got that radiation dosages based on potential damage is in c)rems.
A dose of medical radiation is not like the dose of medicine. When it comes to the radiation dose, there are different types of and units of measurement.
When we think of the dose of the medication, we think of an absolute measurement of the quantity which we take. But radiation isn't measured by the quantity we take.
Radiation from the medical examinations is similar to sunlight. The effect of the sunlight on the skin depends on the light's intensity and how long a person stays in it.
Sunlight Effecting Factors are:
IntensityLength of exposureSensitivity of the skinHence, radiation dosages based on potential damage is in c)rems
To know more about radiation dosages, visit here:
https://brainly.com/question/19754404
#SPJ4
in a completely inelastic collision between two objects, where the objects stick together after the collision, is it possible for the final kinetic energy of the system to be zero?
Yes, the final kinetic energy of the system can be zero if the collision is head-on and both objects have the same magnitude of momentum.
What is kinetic energy?Kinetic energy is the energy that an object has as a result of motion. To accelerate an object, a force must be supplied to it. To apply a force, we must exert effort.Energy is transferred to the object once the work is finished, at which point it moves at a new, constant speed.The energy of motion is known as kinetic energy, and it can be observed in the motion of a particle, an object, or a collection of particles. A person walking, a baseball being thrown, a piece of food falling from a table, or a charged particle in an electric field are all examples of moving objects that consume kinetic energy.To learn more about kinetic energy from the given link :
https://brainly.com/question/26472013
#SPJ4
a spaceship leaves earth traveling at 0.61c. a second spaceship leaves the first at a speed of 0.87c with respect to the first. calculate the speed of the second ship with respect to the earth if it is fired directly toward the earth
To find the speed of the spaceship using, speeds formula to calculate its.
What is speed?
The distance traveled in a unit of time is referred to as "speed." It is the rate of movement of an object. Speed is a scalar quantity, as is the velocity vector's magnitude. There is no clear direction to it. An object is moving more quickly if its speed is higher.
What is velocity?
A particle's or object's displacement with respect to time is expressed vectorially as velocity. The meter per second (m/s), also referred to as speed, is the accepted unit of velocity magnitude.
a) In the reference frame of the Earth, the first spaceship is moving at +0.61 c, and the second spaceship is moving at +0.87c relative to the Earth is relative to the first. Thus the speed of the second spaceship relative to the Earth is
U =(v+u¹)/(1+vu¹/c^2)=(0.61c+0.87c)/(1+(0.61)(0.87))=0.967c
b) In the reference frame of the Earth, the first spaceship is moving at +0.61c and the second
spaceship is moving at -0.87 c relative to the first Thus the speed of the second spaceship relative to the Earth is
U =(v+u¹)/(1+vu¹/c^2)=(0.61c+(-0.87c))/(1+(0.61)(-0.87))= -0.554c
Therefore, the speed of the second ship with respect to the earth is 0.967c and the speed of the second ship with respect to the earth if it is fired directly toward the earth is - 0.554c
Learn more about speed from the given link.
https://brainly.com/question/13943409
#SPJ4
A 5.0 kg object is being acted on by a 20 N force to the right (F1), and a 30 N force,
also to the right (F2).
What is the net force acting on the object?
50 N is the total force exerting on the object.
How can I determine what force is at work on an object?What's the equation for force? Newton's second law of motion defines the force formula as follows: A force is equal to an object's mass times its acceleration, or F = m a. You must use SI units when applying this formula, which calls for Newton's for force, kilograms for mass, and meters per second squared for acceleration.
What is the force law formula?The fundamental equation of motion in classical mechanics is Newton's second law, which states that the force F acting on a body is equal to that body's mass m times its center of mass's acceleration a, or F = ma.
Net force = F1 + F2 ( Because F2 force is also right )
Net force = 20N +30N = 50N
To know more about net force visit:-
https://brainly.com/question/18109210
#SPJ1
antangonists function by?
Answer:7777
Explanation:
Answer:
Explanation:
An antagonist does the opposite of an agonist. It binds to receptors, and stops the receptor from producing a desired response.
A driver takes her car to the market 40m in one direction then after shopping, she drives the car back to her house 40m in the opposite direction. What is the total displacement?
Motion of car from market 40 m in one direction then after shopping, she drives the car back to her house 40 m in the opposite direction. he total displacement is 0 meter.
What is motion?The phenomenon of an item changing its position with respect to time is known as motion in physics. In mathematics, displacement, distance, velocity, and acceleration are used to explain motion.
Displacement is change in distance between two points.
Motion of car from market 40 m in one direction then after shopping, she drives the car back to her house 40 m in the opposite direction. he total displacement is 0 meter.
To learn more about motion refer to the link:
brainly.com/question/22810476
#SPJ1
Which of the following changes would cause the fusion rate in the sun’s core to increase?
a. An increase in the core temperature
b. A decrease in the core radius
The changes that would cause the fusion rate in the sun’s core to increase are:
a.) An increase in the core temperature and
b)A decrease in the core radius
So, correct options are a and b.
The sun is the Main Sequence star. A Main Sequence star is powered by fusing hydrogen into the Helium within its core.
For this type of fusion to take place, a temperature of at least 10 million Kelvin is required, beyond the given point, the fusion rate is actually directly related to the core temperature. If temperature increases, the fusion rate will greatly increase.
Something similar happens if core reduces its radius. This can happen at the end of the star's lifetime, shortly before it becomes the red giant. Once hydrogen is depleted, the core will start to shrink because the force of gravity, and as it gets smaller, gets very more compressed, and its temperature increases
Hence, both a and b options are correct.
To know more about fusion, visit here:
https://brainly.com/question/12701636
#SPJ4
1. When was the Apollo mission considered a success?
Answer:
Apollo achieved the first crewed lunar landing on the Apollo 11 mission, when Neil Armstrong and Buzz Aldrin landed their LM Eagle in the Sea of Tranquility and walked on the lunar surface, while Michael Collins remained in lunar orbit in the CSM Columbia, and all three landed safely on Earth on July 24, 1969.
Explanation:
because i looked up online
If the pressure of a gas is tripled and the absolute temperature of the gas is quadrupled, by what factor will the volume of the gas change?.
The volume of the gas change by a factor 4/3.
An ideal gas is a theoretical gas composed of many randomly transferring factor particles that aren't difficult to interparticle interactions. the best gasoline idea is beneficial because it obeys the precise gas law, a simplified equation of country, and is amenable to evaluation under statistical mechanics.
Calculation:-
From the ideal gas equation
PV = nRT
V = nRT/P
where n and R are constant
new changes
P' = 3P
T' = 4T
V = nR4T/3P
Hence, the volume changed by a factor of 4/3.
Volume is a degree of occupied three-dimensional space. it's far more frequently quantified numerically the usage of SI-derived gadgets or by way of diverse imperial gadgets. The definition of length is interrelated with the extent.
Learn more about ideal gas here:-https://brainly.com/question/20348074
#SPJ4
the disk swings left-and-right on the pivot about the equilibrium position directly below the pivot point a. calculate the period of small oscillations of the disk. use a small angle approximation.
The period of small oscillations of the disk is 2π√L∕g
What is simple harmonic oscillation?Simple harmonic motion can be described as oscillatory motion in which the acceleration of a particle at each position is directly proportional to its displacement from its mean position. This is a distinct case of oscillatory motion. You can represent SHM with a single harmonic sine or cosine function.
For small-angle oscillations, the approximation sinθ≈θ applies, which is a linear differential equation similar to that for simple harmonic oscillators. In this regime the pendulum swings in one period.
T₀ = 2π√L∕g
Where, T₀ = Period of small oscillations
L = length of the string to which the disc is attached to
g = gravitational acceleration.
To know more about simple harmonic oscillation visit:
https://brainly.com/question/17197756
#SPJ4
when two parallel lines are cut by a , then eight angles are formed around the transversal. there are actually only two different angle measures formed; four angles measure congruent, (greater than 90 degrees) and the other four angles measure acute, unless the transversal is perpendicular forming eight angles. we also have angle pairs that are formed. angles f and g are called angles and are congruent. angles a and e are called angles and are congruent. angles c and f are called alternate interior angles and are congruent. angles c and e are called same side interior and are . angles f and h are also supplementary because they make a angle.
When two parallel lines are cut by a , then eight angles are formed around the transversal.
What is angle?
An angle is the figure formed by two rays, called the sides of the angle, sharing a common endpoint, called the vertex of the angle. Angles formed by two rays lie in the plane that contains the rays. Angles are also formed by the intersection of two planes.
Types of angle:
Acute Angles.
Obtuse Angles.
Right Angles.
Straight Angles.
Reflex Angles.
Full Rotation
When two parallel lines are cut by a , then eight angles are formed around the transversal.
To learn more about angle refer to the link:
brainly.com/question/28451077
#SPJ1
A car travels forward with constant velocity. It goes over a small stone, which gets stuck in the groove of a tire. The initial acceleration of the stone, as it leaves the surface of the road, is.
The initial acceleration of the stone is an option (A) vertically upward .
The reason that the tire is rotating with a uniform angular speed and moving with a constant linear pace, is so that as soon as a small stone is caught into the groove of the tire the velocity of the stone is the same as that of the tire.
Acceleration is the rate of change of the velocity of an item with appreciation to time. Accelerations are vector portions. The orientation of an item's acceleration is given by the orientation of the net pressure appearing on that object.
Acceleration is the charge at which velocity modifications with time, in terms of each speed and route. A factor or an object moving in a straight line is accelerated if it quickens or slows down. movement on a circle is extended despite the fact that the rate is consistent because the course is continually changing.
αc = ω²R
The direction of net acceleration is towards its center. Hence answer is option A.
Learn more about acceleration here:- https://brainly.com/question/29110429
#SPJ4
Disclaimer:- your question is incomplete, please see below for the complete question.
(A) vertically upward
(B) horizontally forward
(C) horizontally backward
(D) zero
(E) upward and forward, at approximately 45° to the horizontal
a screen is placed 37 cm from a single slit which is illuminated with 564 nm light. if the distance from the central maximum to the first minimum of the diffraction pattern is 2.7 mm, how wide is the slit in micrometer?
The width is 1.55650 μm.
What kind of diffraction pattern is it?A parallel electron beam is focused on the sample in the same manner as in imaging mode to produce diffraction patterns. The beam width transmitted is controlled by a chosen area aperture, and the intermediate lens concentrates the diffraction pattern onto the screen.
Given data:
separating the single slit from the screen = L = 37cm
λ = 564 nm
distance between the first minimum and the central maximum = Z = 2.7mm
We are aware that the destructive diffraction angle is:
θ = pλ/a
where p is the minimum's order, p = 1 for the first minimum, and a is the slit's width, we get the following:
θ = (564nm/a)
We also know that a triangle rectangle can be created, with the distance between the slit and the screen serving as the adjacent cathetus to this angle and the distance between the first maximum and the first minimum serving as the opposite cathetus:
Tg(θ) = Z/L
Tan(564nm/a) = 2.7/37
The same units must first be used on the right side:
2.7mm = 0.27cm
Tg(636nm/a) = 0.27cm/43cm
636nm/a = Atg( 0.27cm/43cm ) = 0.406
a = 636nm/0.406 = 1,556.50nm
1 μm = 1000nm
then:
a = 1,556.50 nm = (1,556.50/1000) μm = 1.55650 μm
To know more about diffraction pattern visit:
https://brainly.com/question/17093811
#SPJ4
a ball is thrown upward with a speed of 50 ft/s from the edge of a cliff that is 2100 ft above the ground. at what time t does the ball hit the ground? (recall that acceleration due to gravity is 32 ft/s2. round your answer to two decimal places or enter an exact answer.)
The time t the ball hit the ground is 11.3494 Sec.
Acceleration is the rate of change of the velocity of an item with appreciation to time. Accelerations are vector portions. The orientation of an item's acceleration is given by the orientation of the net pressure appearing on that object.
Calculation:-
S = ut + 1/2 at²
2100 = 50t + 0.5 × 32 t²
16 t² + 50t - 2100 = 0
T = 11.3494 Sec
Acceleration is the charge at which velocity modifications with time, in terms of each speed and route. A factor or an object moving in a straight line is accelerated if it quickens or slows down. movement on a circle is extended despite the fact that the rate is consistent because the course is continually changing.
Learn more about acceleration here:- https://brainly.com/question/29110429
#SPJ4
In a tennis serve, a 0.070 kg ball can be accelerated from rest to 35 m/s over a
distance of 0.80. Find the force exerted on the ball during the serve.