There are 180 trees in gardner grove orchard, and 18 of them are pears. What percent of the trees are pear trees?

Answer:

Hey kid stop cheating XDDDDDDDDDDDDDDDDDDD

Step-by-step explanation:

In a two-tail hypothesis test, if the calculated test statistic (z-statistic) is -1.58 and the level of significance is used, the decision will depend on comparing the z-statistic to the critical values of the standard normal distribution corresponding to the desired level of significance.

Explanation: In a two-tail hypothesis test, the null hypothesis assumes that there is no significant difference between the sample and population parameters. The alternative hypothesis, on the other hand, suggests a significant difference. The level of significance, denoted as α, determines the critical values that divide the rejection and non-rejection regions.

If the calculated test statistic, in this case -1.58, falls within the rejection region, which is determined by the critical values, we reject the null hypothesis. If the test statistic falls outside the rejection region, we fail to reject the null hypothesis.

To make a decision, we compare the z-statistic to the critical values corresponding to the level of significance. If the z-statistic of -1.58 falls outside the critical values, it means it is not extreme enough to reject the null hypothesis, and we fail to reject it. However, if the z-statistic falls within the critical values, we reject the null hypothesis in favor of the alternative hypothesis.

To learn more about null hypothesis click here: brainly.com/question/29892401

#SPJ11

The center of the circle is point: C=(−2,−7).

The tax rate required to meet the budgetary demands is 2.5%.

According to the given information;

Total property value in the community = $120,000,000

Total amount required to provide a government service = $3,000,000

Now, to find the tax rate required to meet the budgetary demands we will use the formula;

Tax Rate = (Total amount required to provide a government service / Total property value in the community) × 100

Substitute the given values in the above formula;

Tax Rate = ($3,000,000 / $120,000,000) × 100= 2.5%

Thus, the tax rate required to meet the budgetary demands for a community is 2.5 percent.

#SPJ11

Let us know more about tax rate: https://brainly.com/question/30629449.

The probability of F'UA is 0.9458.

According to the given data; the probability of ovont F is 0.2907, the probability of event A is 0.1849 and the probability of the driver is female and is 24 years old or less is 0.0542.

Here are the required probabilities;

a. The probability of FUA:F: Female U: 24 years old or less A: Fatal vehicle accident We can find the probability of FUA using the formula; P(FUA) = P(F ∩ U ∩ A)

We know that the probability of the driver in a fatal vehicle accident is female is 0.2907P(F) = 0.2907 Also, we know that the probability that the driver is 24 years old or less is 0.1849.P(U) = 0.1849

We also know that the probability that the driver is female and is 24 years old or less is 0.0542.P(F ∩ U) = 0.0542Now we can use the formula; P(FUA) = P(F ∩ U ∩ A)= P(F) x P(U) x P(A|FU)= 0.2907 × 0.1849 × (0.0542 / 0.2907)= 0.0542

So, the probability of FUA is 0.0542.

b. The probability of F'UA: It can be calculated by using the complement of FUA.P(F'UA) = 1 - P(FUA)= 1 - 0.0542= 0.9458

To Know more about probability visit:

https://brainly.com/question/31828911

#SPJ11

Answer:

Step-by-step explanation:

Given data: The probability that the driver in a fatal vehicle accident is female (event F) is 0.2907. The probability that the driver is 24 years old or less (event A) is 0.1849. The probability that the driver is female and is 24 years old or less is 0.0542.

a) The probability of FUA is 0.4214.

b) The probability of F'UA is 0.5786.

a) The probability of FUA can be calculated as follows:

P(FUA) = P(F) + P(A) - P(F ∩ A) [By Addition Law], Where P(F) = 0.2907, P(A) = 0.1849, P(F ∩ A) = 0.0542.

By putting these values in the above equation we get:

P(FUA) = P(F) + P(A) - P(F ∩ A)

= 0.2907 + 0.1849 - 0.0542

= 0.4214

Therefore, the probability of FUA is 0.4214.

b) The probability of F'UA can be calculated as follows:

P(F'UA) = P(F' ∩ A') [By Complement Law], Where

P(F' ∩ A') = 1 - P(FUA)

= 1 - 0.4214

= 0.5786

Therefore, the probability of F'UA is 0.5786.

To know more about probability, visit:

https://brainly.com/question/31828911

#SPJ11

Answer:16

Step-by-step explanation:

The partial sum of the given sequence, -2 + (-6) + (-18) + ... + (-486), can be found using the formula Sₙ = a(1 - rₙ)/(1 - r), where a is the first term, r is the common ratio, and n is the number of terms. The value of the partial sum is 728.

To find the partial sum of the given sequence, we can use the formula for the sum of a geometric series, which is Sₙ = a(1 - rₙ)/(1 - r). In this case, the first term a is -2, and the common ratio r is -3. We need to determine the number of terms, n.

By examining the sequence, we can see that each term is obtained by multiplying the previous term by -3. This indicates that the common ratio is -3, as each term is multiplied by -3 to obtain the next term.

To find the number of terms, we can determine the value of n using the formula rₙ = a * r^(n-1). In this case, we have -486 = -2 * (-3)^(n-1).

By solving this equation, we find n = 6.

Substituting the values into the formula for the partial sum, we have:

S₆ = -2(1 - (-3)^6)/(1 - (-3)),

= -2(1 - 729)/(1 + 3),

= -2(-728)/4,

= 728.

Therefore, the partial sum of the given sequence is 728.

Learn more about sequence here:

https://brainly.com/question/30262438

#SPJ11

The correct statement for the 95% confidence interval is given by

option (B) If 95% confidence intervals are calculated from all possible samples of the given size, μ will be in 95% of these intervals.

Confidence interval = 95%

Population mean μ

A confidence interval is an estimate of a population parameter  the population mean μ based on sample data.

The interpretation of a 95% confidence interval is that ,

Sample from the population and construct 95% confidence intervals,

Approximately 95% of these intervals would contain the true population parameter.

Therefore, statement (B) accurately reflects the concept of confidence intervals.

It states that if we calculate 95% confidence intervals from all possible samples of the given size,

The true population mean μ will be within 95% of these intervals.

This aligns with the interpretation of a confidence interval as a measure of the precision or reliability of our estimate.

The other statements which are not accurate,

(A) There is no probability associated with a specific confidence interval.

Confidence intervals provide a range of plausible values, but they do not represent probabilities of the parameter being within that range.

(C) Calculating confidence intervals from all possible samples will not guarantee that 95% of them will be (23, 45).

The specific values of the confidence intervals will vary across samples.

(D) Confidence intervals provide a range in which we are confident the true parameter lies.

But it does not imply that the sample mean x falls within that range with 95% certainty.

(E) The margin of error is the half-width of the confidence interval, which represents the maximum amount of error we expect in our estimate.

Here, the margin of error would be (45 - 23) / 2 = 11, not 22.

Therefore , for the confidence interval 95% option B is correct.

learn more about confidence interval here

brainly.com/question/32577598

#SPJ4

Answer:

A. Strong

Step-by-step explanation:

I took the test

Have a great day! ;)

This trend line is a strong fit for these data. Then the correct option is A.

A linear system is one in which the parameter in the equation has a degree of one. It might have one, two, or even more variables.

Bridget has captured many purple-footed bog frogs.

She weighs each one and then counts the number of yellow spots on its back.

This trend line is a strong fit for these data.

Because all the points are closer to the line.

Then the correct option is A.

More about the linear system link is given below.

https://brainly.com/question/20379472

#SPJ5

Answer:

15 ft

Step-by-step explanation:

If every 1/4 of an inch is a foot, than every inch is 4 feet.

1 inch = 4ft

3 inches = 12ft

1/4 + 1/4 + 1/4 = 3/4

3/4=3 ft

12+3=15ft

Answer:

Mrs. Habib will have 22.25 feet of border left after she puts border around the board.

Step-by-step explanation:

You must find the perimeter of the board and subtract it from the amount of border she has to find how much she will have left after she uses it. The formula for perimeter is [tex]P=2(l+w)[/tex], where [tex]l=[/tex] the length of the board, and [tex]w=[/tex] the width of the board. You will add those together and multiply them by 2 because there are 4 sides to a rectangle. That means this equation will look like:

[tex]P=2(8.25+3.75)[/tex]

Now you can just solve for the perimeter.

[tex]P=2(12)[/tex]

[tex]P=24[/tex]

The perimeter is 24 feet. That means it will take 24 feet of border to cover her board. In order to find out how much she'll have left over, just subtract 24 from the total amount of border she has.

[tex]46.25-24=22.25[/tex]

Therefore Mrs. Habib will have 22.25 feet of border left over after she covers the bulletin board.

Answer:

the answer is 42. hope this helped

First turn 15% into a decimal.

You get .15

Then multiply .15 by 280

You get 42

Answer:

it's radius is 9 and diameter is 18

Answer:

diameter=18cm

radius =diameter/2=18/2=9cm

The probability of finding four or more tanks in the system at any time is approximately 0.95. The probability of having 6 or more tanks in the system is approximately 0.77.

A. The utilization of the test station is calculated by dividing the average service rate (1 tank per 8 minutes) by the arrival rate (1 tank every 16 minutes). Utilization = Service rate / Arrival rate = 1/2 = 0.5 or 50%.

B. The probability that a tank has to wait in the queue prior to testing can be calculated using the queuing theory formula for the M/M/1 queue. In this case, the utilization (ρ) is 0.5. The formula for the probability of waiting in the queue (Pw) is Pw = ρ^2 / (1 - ρ) = 0.5^2 / (1 - 0.5) = 0.25 / 0.5 = 0.5 or 50%.

C. The mean time a tank spends in the queue can be calculated using Little's Law, which states that the mean number of customers in a stable system (L) is equal to the arrival rate (λ) multiplied by the mean time spent in the system (W). In this case, L = λ * W. The mean number of tanks in the queue (Lq) can be calculated using Lq = λ * Wq, where Wq is the mean time spent in the queue. Given λ = 1/16 tanks per minute and Lq = 8 tanks, we can rearrange the equation to solve for Wq: Wq = Lq / λ = 8 / (1/16) = 128 minutes / 16 = 8 minutes.

D. The mean time a tank spends in the system (queue + test) is equal to the mean time spent in the queue (Wq) plus the mean service time (1/8 tanks per minute). Therefore, the mean time in the system (Ws) is Ws = Wq + 1/μ = 8 + 1/8 = 8.125 minutes.

E. The mean number of tanks expected to be in the queue at any time can be calculated using Little's Law: Lq = λ * Wq. Given λ = 1/16 tanks per minute and Wq = 8 minutes, we can calculate Lq: Lq = (1/16) * 8 = 0.5 tanks.

F. The mean number of tanks expected to be in the system at any time can be calculated using Little's Law: L = λ * Ws. Given λ = 1/16 tanks per minute and Ws = 8.125 minutes, we can calculate L: L = (1/16) * 8.125 = 0.507 tanks.

G. The probability of finding four or more tanks in the system at any time can be calculated using the Poisson distribution formula. By summing the probabilities for four, five, and more tanks, we get 0.043.

H. The probability of having 6 or more tanks in the system can also be calculated using the Poisson distribution formula, which results in a probability of 0.002.

Learn more about probability here:

https://brainly.com/question/32117953

#SPJ11

Jordan has run 21/4 miles after 6 days.

Jordan runs to the end of his street and back home every day and the total distance of a trip to the end of the street and back home is 7/8 mile.

Since Jordan runs to the end of the street and back home every day, the distance he runs in one day is given by;

2 × (distance to the end of the street)

= 7/8 mile (distance to the end of the street)

= 7/16 mile

The distance Jordan runs in 6 days is;

6 × (distance to the end of the street and back home)

= 6 × 7/8 miles

= 42/8 miles

= 21/4 miles

Therefore, Jordan has run 21/4 miles after 6 days.

Learn more about distance https://brainly.com/question/31713805

#SPJ11

Answer:

hh

Step-by-step explanation:

Let f, g and h be the functions from the set of integers to the set of integers defined by f(x) = 2x +3, g(x) = 3x + 2 and h(x) = x3 +1.

(a) To find (f º g)(x), we substitute g(x) into f(x) as follows:

  (f º g)(x) = f(g(x)) = f(3x + 2) = 2(3x + 2) + 3 = 6x + 4 + 3 = 6x + 9.

(b) To find (g º f)(x), we substitute f(x) into g(x) as follows:

  (g º f)(x) = g(f(x)) = g(2x + 3) = 3(2x + 3) + 2 = 6x + 9 + 2 = 6x + 11.

(c) To find the inverse of f(x), denoted as l'ind (f)(x), we solve for x in terms of f(x):

  x = (f(x) - 3) / 2.

  Rearranging the equation, we get f^(-1)(x) = 1/2x - 3/2.

(d) To find (h + h)(x), we add h(x) to itself:

  (h + h)(x) = h(x) + h(x) = ([tex]x^3[/tex] + 1) + (x^3 + 1) = 2[tex]x^3[/tex] + 2.

(e) To find the inverse of h(x), denoted as h^(-1)(x), we solve for x in terms of h(x):

  x = (h(x) - 1)^(1/3).

  Rearranging the equation, we get h^(-1)(x) = (x - 1)^(1/3).

Learn more about integers here:

https://brainly.com/question/490943

#SPJ11

Answer:

Taxes are money paid to the government, you need to pay these for the army , teachers, and it forms a better economy etc.!:) Have a nice day friend.

Step-by-step explanation:

rylee1015, it does matter because you are copying answers just to get points, and it might be wrong which is not fair, so stop it!!!:(

Answer:

Maybe multiply 2 and 4 then multiply 5x  of product of 2 and 4  

Step-by-step explanation:

Answer:

8. center: (-7,5)

radius: 9

Step-by-step explanation:

8. to find the center, you need to get the equation in the form of (x-h)^2+(y-k)^2=r^2

you can do this by completing the square:

x^2+y^2+14x-10y-7=0

x^2+14x+49+y^2-10y+25=7+49+25

(x+7)^2+(y-5)^2=81

so, the center is (-7,5) and the radius is 9

Answer:

C. -6 ≤ y < ∞

C is correct

Step-by-step explanation:

edmentum

The more accurate forward finite divided difference estimates for the derivatives are

f₁'(x₁) = 0

f₂'(x₂) = 0

f₃'(x₃) = 0

To make it easier to work with, let's rearrange the equations in terms of the variables:

4x₁ + 2x₂ + x₃ = 1

2x₁ + x₂ + x₃ = 4

2x₁ + 2x₂ + x₃ = 3

The truncated formula for estimating the derivative using the forward finite divided difference is given by:

f'(x) ≈ (f(x + ht) - f(x)) / ht

Here, f(x) represents the function we want to differentiate, and ht is the step size.

Let's calculate the derivatives using the truncated formula for the given equations:

For x₁:

f₁'(x₁) ≈ (f₁(x₁ + ht) - f₁(x₁)) / ht

= (4(x₁ + ht) + 2x₂ + x₃ - 4x₁ - 2x₂ - x₃) / ht

= (4x₁ + 4ht + 2x₂ + x₃ - 4x₁ - 2x₂ - x₃) / ht

= (4ht) / ht

= 4

Similarly, we can calculate the derivatives for x₂ and x₃.

For x₂:

f₂'(x₂) ≈ (f₂(x₂ + ht) - f₂(x₂)) / ht

= (2x₁ + (x₂ + ht) + x₃ - 2x₁ - x₂ - x₃) / ht

= (x₂ + ht - x₂) / ht

= ht / ht

= 1

For x₃:

f₃'(x₃) ≈ (f₃(x₃ + ht) - f₃(x₃)) / ht

= (2x₁ + 2x₂ + (x₃ + ht) - 2x₁ - 2x₂ - x₃) / ht

= (x₃ + ht - x₃) / ht

= ht / ht

= 1

So, the truncated forward finite divided difference estimates for the derivatives are:

f₁'(x₁) = 4

f₂'(x₂) = 1

f₃'(x₃) = 1

The more accurate formula for estimating the derivative using the forward finite divided difference is given by:

f'(x) ≈ (-3f(x) + 4f(x + ht) - f(x + 2ht)) / (2ht)

Let's calculate the derivatives using the more accurate formula for the given equations:

For x₁:

f₁'(x₁) ≈ (-3f₁(x₁) + 4f₁(x₁ + ht) - f₁(x₁ + 2ht)) / (2ht)

= (-3(4x₁ + 2x₂ + x₃) + 4(4(x₁ + ht) + 2x₂ + x₃) - (4(x₁ + 2ht) + 2x₂ + x₃)) / (2ht)

= (-12x₁ - 6x₂ - 3x₃ + 16x₁ + 8ht + 4x₂ + 2x₃ - 4x₁ - 8ht - 2x₂ - x₃) / (2ht)

= (-12x₁ + 16x₁ - 4x₁ + 8ht - 8ht) / (2ht)

= 0

Similarly, we can calculate the derivatives for x₂ and x₃.

For x₂:

f₂'(x₂) ≈ (-3f₂(x₂) + 4f₂(x₂ + ht) - f₂(x₂ + 2ht)) / (2ht)

= (-3(2x₁ + x₂ + x₃) + 4(2x₁ + (x₂ + ht) + x₃) - (2x₁ + (x₂ + 2ht) + x₃)) / (2ht)

= (-6x₁ - 3x₂ - 3x₃ + 8x₁ + 4x₂ + 4ht + 4x₃ - 2x₁ - x₂ - x₃) / (2ht)

= (-6x₁ + 8x₁ - 2x₁ - 3x₂ + 4x₂ - x₂ - 3x₃ + 4x₃ - x₃ + 4ht) / (2ht)

= 0

For x₃:

f₃'(x₃) ≈ (-3f₃(x₃) + 4f₃(x₃ + ht) - f₃(x₃ + 2ht)) / (2ht)

= (-3(2x₁ + 2x₂ + x₃) + 4(2x₁ + 2x₂ + (x₃ + ht)) - (2x₁ + 2x₂ + (x₃ + 2ht))) / (2ht)

= (-6x₁ - 6x₂ - 3x₃ + 8x₁ + 8x₂ + 4x₃ + 4ht - 2x₁ - 2x₂ - x₃) / (2ht)

= (-6x₁ + 8x₁ - 2x₁ - 6x₂ + 8x₂ - 2x₂ - 3x₃ + 4x₃ - x₃ + 4ht) / (2ht)

= 0

To know more about derivative here

https://brainly.com/question/30074964

#SPJ4

The command "-index (F5:F277, rand between (1.273))" when entered in the spreadsheet with survey responses that we use for Project 2 (and will use for Project 3) would pick a response at random from the responses to the question.

So, the correct option is: Pick a response at random from the responses to the question "Pineapple on pizza."

The INDEX function is an Excel worksheet function that finds the value or reference to a value within an array. It returns a reference to the location of the value, rather than the value itself. The INDEX function in Excel is a lookup and reference function.

The INDEX function allows you to search a spreadsheet and find the value contained in a given cell. The INDEX function takes two arguments, the array and the index number. The array is the range of cells that you want to search, while the index number is the position of the value you want to return.

To know more about function refer to:

https://brainly.com/question/11624077

#SPJ11

Answer:

Step-by-step explanation:

How to write numbers in standard form:

Write the first number 8.

Add a decimal point after it: 8.

Now count the number of digits after 8. There are 13 digits.

So, in standard form: 81 900 000 000 000 is 8.19 × 10¹³

Answer:

3 cm

Step-by-step explanation:

Answer: She's wrong.

Step-by-step explanation:

Numbers of hours used in solving homework last week = 15

Numbers of hours used in solving homework this week = 18

Percentage increase = (18 - 15) / 15 × 100

= 3/15 × 100

= 1/5 × 100

= 20%

Since Maxie said that she spent 120% more time doing homework this week, she's wrong. She only spent 20% more.

Answer:

X=-11/6

Steps

f(x)=6x+11

simplify,

0=6x+11

-6x+11

Divide both sides,

Answer is x = -¹¹/6

Answer: See attachment below (graphing)

Step-by-step explanation:

INFORMATION:

The slope-intercept is when y=mx+b

mx=the slope

b=y-intercept

REPHRASE EQUATION:

y=mx+b

y=-3-x

y=(-1)x-3

CONCLUSION:

Slope=-1

Y-intercept=-3

Hope this helps!! :)

Please let me know if you have any questions

Answer:

the graph​: y = -3 - x

The estimated flow rate is approximately 3.94 cm3/s.

To estimate the flow rate at t=9s, we can use the formula:

flow rate = change in volume / change in time.

Using the data given, we can calculate the change in volume and change in time for the interval between t = 8s and t = 11s.

Change in volume = 36.04 - 24.23 = 11.81 cm³

Change in time = 11 - 8 = 3s

Now, we can plug these values into the formula to find the flow rate:

flow rate = change in volume / change in time = 11.81 cm3 / 3s ≈ 3.94 cm3/s

Therefore, the estimated flow rate at t=9s is approximately 3.94 cm3/s.

To learn more about flow rate: https://brainly.com/question/31070366

#SPJ11