Answers
Answer:
9717.246 J
Explanation:
From the question given above, the following data were obtained:
Mass (m) of water = 40.5 g
Initial temperature (T₁) = 15.6 °C
Final temperature (T₂) = 73 °C
Specific heat capacity (C) of water = 4.18 J/gºC
Heat (Q) =.?
Next, we shall determine the change in the temperature of water. This can be obtained as follow:
Initial temperature (T₁) = 15.6 °C
Final temperature (T₂) = 73 °C
Change in temperature (ΔT) =?
ΔT = T₂ – T₁
ΔT = 73 – 15.6
ΔT = 57.4 °C
Finally, we shall determine the heat energy required. This can be obtained as follow:
Mass (m) of water = 40.5 g
Specific heat capacity (C) of water = 4.18 J/gºC
Change in temperature (ΔT) = 57.4 °C
Heat (Q) =.?
Q = MCΔT
Q = 40.5 × 4.18 × 57.4
Q = 9717.246 J
Thus, the heat energy required is 9717.246 J
Related Questions
What is the coefficient, subscript for V, and subscript for O in V2O5
Answers
Answer: Coefficient 0
subscript for V 2
subscript for O 5
Explanation: yes
There is no coefficient in V₂O₅ and the subscript of vanadium V is 2 and the subscript of oxygen is 5.
What is vanadium pentoxide ?Vanadium pentoxide is an ionic compound formed by donating electrons from the vanadium metal to oxygen. The chemical formula of vanadium pentoxide is V₂O₅.
The chemical formula of a compound is written in terms of the chemical symbol of each constituent elements and the number of their atoms. The number of atoms is written as subscript for the chemical symbols.
In V₂O₅, there are are 2 vanadium atoms and 5 oxygen atoms. Coefficients are numbers prior to the formula in reaction. Here there is no coefficient and the subscript for V is 2 and that of O is 5.
Find more on chemical formula:
https://brainly.com/question/29031056
#SPJ2
What ways is carbon added to the atmosphere
Answers
Answer:
One way is through fossil fuels. When people burn fossil fuels it enters the atmosphere as carbon dioxide gas. Another way is through animals. Most animals exhale carbon dioxide as a waste product which gets into the atmosphere.
Why is it easier to switch to solar and wind energy as compared to other alternative energy sources? Select all that apply.
A. They are more cost-effective.
B. They require large, easily obtainable parcels of land.
C. They can be produced easily in areas with geothermal activity.
D. The land can be used for other purposes while supplying energy.
Answers
Answer:C. They can be produced easily in areas with geothermal activity.
D. The land can be used for other purposes while supplying energy.
Explanation:
Both c and d are correct
It is easier to switch to solar and wind energy as compared to other alternative energy sources because they can be produced easily in areas with geothermal activity and can be used for other purposes while supplying energy.
What is solar energy?Solar energy is any type of energy generated by the sun. Solar energy can be harnessed directly or indirectly for human use.
Generating energy that produces no greenhouse gas emissions from fossil fuels and reduces some types of air pollution.
Diversifying energy supply and reducing dependence on imported fuels. Creating economic development and jobs in manufacturing, installation, and more.
Hence, options C and D are correct.
Learn more about the solar energy here:
https://brainly.com/question/23611169
#SPJ2
What is the SI unit for force?
Answers
Answer: The SI unit of force is the newton, symbol N.
Explanation:
Answer:
the SI unit of force is newton
Number
850095
Scientific
Notation
0-2
What is the scientific notation to 850095? Is it 8.5 x10^4
Answers
Answer:
8.50095 x 10^5
Explanation:The purpose of scientific notation is for scientists to write very large, or very small, numbers with ease.
Calculating scientific notation for a positive integer is simple, as it always follows this notation:
a x 10b
Follow the steps below to see how 850,095 is written in scientific notation.
Step 1
To find a, take the number and move a decimal place to the right one position.
Original Number: 850,095
New Number: 8.50095
Step 2
Now, to find b, count how many places to the right of the decimal.
New Number: 8 . 5 0 0 9 5
Decimal Count: 1 2 3 4 5
There are 5 places to the right of the decimal place.
Step 3
Building upon what we know above, we can now reconstruct the number into scientific notation.
Remember, the notation is: a x 10b
a = 8.50095
b = 5
Now the whole thing:
8.50095 x 105
Step 4
Check your work:
105 = 100,000 x 8.50095 = 850,095
__HgO __Hg + __O2 what is the reaction
Answers
Answer:
2HgO <---- 2Hg + O2
Explanation:
What type of crust is colliding?
Japan Trench
Eurasian Plate
Pacific Plate
Answers
Answer: The Eurasian Plate or both the Eurasian and Pacific Plate.
Explanation:
What is the only way to be certain that a chemical change has occurred
Answers
Answer:
New kinds of products forms and the reaction is not easily reversible.
Explanation:
The only way to be certain that a chemical change has occurred is by finding out if new kinds of products have been formed.
A chemical change is a change in which new kinds of matter is formed. It is always accompanied by energy changes.
The process is not easily reversible.
Examples of chemical changes are combustion, rusting of iron, precipitation and souring of milk.
If you were balancing an equation containing the O2 molecule, which of the following would be correct representations of O2 and its coefficient?
a. ½O2
b. O2
c. 3O2
d. 6O2
e. 3O
f. 5O3
Answers
Answer:
a. ½O2
b. O2
c. 3O2
d. 6O2
Explanation:
Hello!
In this case, since balancing chemical reactions can be attained by adding coefficients prior to each species in the chemical equation, we infer that the following representations are correct because they have a coefficient and the molecule O2 as diatomic oxygen:
a. ½O2
b. O2
c. 3O2
d. 6O2
It means that e. and f. are wrong because even when they have the coefficient, the molecule O2 is not properly written.
Best regards!
The correct representations of O2 and its coefficient are: ½O2, O2, 3O2, 6O2.
Oxygen molecule O2 exists as a diatomic molecule that comprises two atoms chemically bonded together.
When oxygen undergoes a chemical reaction with other compounds, the diatomicity of oxygen O2 is still usually maintained.
The coefficient of oxygen O2 varies depending on the reaction in which oxygen undergoes such as:
combustion reaction with alkanes,the reaction of iron with oxygen O2, reaction with magnesium etc.An oxygen molecule does not exist as 3O and 5O3 represent a reaction of ozone.
Therefore, we can conclude that the correct representations of O2 and its coefficient are: ½O2, O2, 3O2, 6O2.
Learn more about balancing chemical reactions here:
https://brainly.com/question/21856851?referrer=searchResults
Water with a flowrate of 1 m3/min and benzene concentration of 150 mg/L flows through a 10 meter long, 0.1 m diameter steady state and conservative PFR, after which it is fed into a CMFR with a volume of 100 m3. A second water stream with a flowrate of 0.5 m3/min and benzene concentration of 150 mg/L is also fed into the CMFR. The CMFR is steady state and conservative. Calculate the effluent concentration of the CMFR.
Answers
Answer:
the effluent concentration of the CMFR is 150 mg/L
Explanation:
Given that;
flowrate of first water Q₁ = 1 m³/min
benzene concentration C₁ = 150 mg/L
flowrate of second water Q₂ = 0.5 m3/min
benzene concentration C₂ = 150 mg/L
To Calculate the effluent concentration of the CMFR, we use the expression;
[tex]C_{effluent}[/tex] = (Q₁C₁ + Q₂C₂) / Q₁ + Q₂
we substitute
[tex]C_{effluent}[/tex] = (1 × 150 + 0.5 × 150) / 1 + 0.5
[tex]C_{effluent}[/tex] = 225 / 1.5
[tex]C_{effluent}[/tex] = 150 mg/L
Therefore, the effluent concentration of the CMFR is 150 mg/L
please help me please help me
Answers
Description: When a carboxylic acid is treated with an alcohol and an acid catalyst, an ester is formed (along with water). This reaction is called the Fischer esterification. Notes: The reaction is actually an equilibrium. The alcohol is generally used as solvent so is present in large excess.
Which of the following is NOT a factor in how much voltage is produced by a
generator?
How fast the magnet in the generator is moving through the coiled wire
How many amps are run through the electromagnet of the generator
How strong the magnet in the generator actually is
How many times the wire is coiled in the generator....
Answers
Answer:
How fast the magnet in the generator is moving through the coiled wire
Explanation:
Another name for an electric generator is the electric motor. It is a device that is used to convert mechanical energy into electrical energy.
It comprises of a rectangular coil of insulated wire called armature which rotates about a fixed axis. Powerful magnets provides the required magnetic field. A commutator made of split ring copper and two carbon brushes are attached to it.
The voltage produced by the electric motor depends on;
i) The strength of the magnetic field.
ii) The number of turns of the coil
iii) The current across the armature
name all 7 elements classified as metalloids.
PLEASE HELP ASAP
Answers
Answer:
Explanation
Boron (B)
Silicon (Si)
Germanium (Ge)
Arsenic (As)
Antimony (Sb)
Tellurium (Te)
Polonium (Po
How is thermal energy transferred during conduction? Check all that apply.
Thermal energy is transferred between particles that are not touching each other.
Thermal energy is transferred between particles that are in direct contact with each other.
Thermal energy is transferred between objects of different temperatures.
Themal energy is transferred between objects of the same temperature.
Themel energy is transferred from slow-moving particles to fast-moving particles.
Themal energy is transferred from fast-moving particles to slow-moving particles, .
Answers
Answer:
Option 2, 3, and also 6 btw
Explanation:
The other guy was wrong
According to the following reaction, how many moles of carbon dioxide will be formed upon the complete reaction of 28.6 grams of carbon monoxide with excess oxygen gas?
carbon monoxide (g) + oxygen (g) ----> carbon dioxide (g) + moles carbon dioxide
Answers
Explanation:
We have 2CO + O2 => 2CO2.
Moles of CO = 28.6g / (28g/mol) = 1.021mol.
Moles of CO2 = Moles of CO = 1.021mol.
GIVING 100 PTS EASY SCIENCE PLS HELP
Answers
Answer:
Hello there!
I believe the answer you are looking for is A!
Explanation:
It makes sense to me more than the other answer choices.
have a nice day
The density of molasses is 2.28g/mL. What volume of molasses would have a mass of 392.8g?
Answers
Answer:
V = 172.28 mL
Explanation:
density is mass divided by volume
p = density
m = mass
V = volume
p = m/v
V = m/p
V = 392.8/2.28
V = 172.28 mL
Substances A and B are combined. When combined, substance A, which is a black solid, sinks to the bottom of substance B which is a clear liquid. Based on this situation, which of the following is true.
A. Substances A and B formed a mixture
B. It is impossible to tell without more information
C. Substances A and B formed a compound
D. Substances A and B formed a new element
Answers
Answer:
c thats just what i do
Explanation:
6. Primary succession usually occurs after which catastrophic events?
a.) Volcanic eruptions burning down a forest
5. Hurricanes flooding a forest
c. Tomadoes uprooting trees leaving behind the soil
d. Glaciers moving revealing bare rock underneath
Answers
Answer: d. Glaciers moving revealing bare rock underneath
Explanation:
Primary succession is what happens when living things colonise an area that was previously uncolonized because it had been destroyed or hadn't been created yet.
When glaciers move on from areas and expose the bare rock underneath, these areas are new and so primary succession will take place as living things begin to colonize this new area.
what is visibility ?
Answers
Answer:
Something or someone you can see invisibility is the opposite of something you cannot see or some thing you cannot see
Explanation:
Which change of state involves a release of energy?
Answers
Answer: CONDENSATION When steam is cooled, it releases thermal energy and turns into its liquid state. This process is called condensation. reversed if the liquid is cooled. The change from the liquid state to the solid state is called freezing
At Grangemouth, BP make large quantities of ethanol by a process called catalytic
hydration of ethene:
C2H4 + H2O → C2H5OH
What mass of ethanol would be produced from 560kg of ethene
process step by step, please
Answers
Answer:
Mass = 799971.50 g
Explanation:
Given data:
Mass of ethene = 560 Kg (560 Kg ×1000 g/1 Kg= 560000 g)
Mass of ethanol produced = ?
Solution:
Chemical equation:
C₂H₄ + H₂O → C₂H₅OH
Number of moles of ethene:
Number of moles = mass/molar mass
Number of moles = 560000 g / 28.05 g/mol
Number of moles = 19964.35 mol
Now we will compare the moles of ethene and ethanol.
C₂H₄ : C₂H₅OH
1 : 1
19964.35 : 19964.35
Mass of ethanol:
Mass = number of moles × molar mass
Mass = 19964.35 mol × 46.07 g/mol
Mass = 799971.50 g
You have 70 grams of aluminum. How many moles do you have
Answers
Answer:
70 moles is an Alluminium
HELP!!! The chemical formula is different from the empirical formula in
A) H2O2
B) CO2
C) CO.
OD) H20.
Answers
Answer:
the Ans is H2O2
Explanation:
THANKS.............
How many grams of Fe will be produced if 705.0g of H20 are produced?
Fe3O4 + 4H2
-->
3 Fe + 4H2O
Answers
2265 g Fe₃O₄
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Reading a Periodic TableStoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
[RxN - Balanced] Fe₃O₄ + 4H₂ → 3Fe + 4H₂O
[Given] 705.0 g H₂O
Step 2: Identify Conversions
[RxN] 4 mol H₂O → 1 mol Fe₃O₄
Molar Mass of H - 1.01 g/mol
Molar Mass of O - 16.00 g/mol
Molar Mass of Fe - 55.85 g/mol
Molar Mass of H₂O - 2(1.01) + 16.00 = 18.02 g/mol
Molar Mass of Fe₃O₄ - 3(55.85) + 4(16.00) = 231.55 g/mol
Step 3: Convert
Set up stoich: [tex]\displaystyle 705.0 \ g \ H_2O(\frac{1 \ mol \ H_2O}{18.02 \ g \ H_2O})(\frac{1 \ mol \ Fe_3O_4}{4 \ mol \ H_2O})(\frac{231.55 \ g \ Fe_3O_4}{1 \ mol \ Fe_3O_4})[/tex]Multiply/Divide/Cancel units: [tex]\displaystyle 2264.74 \ g \ Fe_3O_4[/tex]Step 4: Check
Follow sig fig rules and round. We are given 4 sig figs.
2264.74 g Fe₃O₄ ≈ 2265 g Fe₃O₄
7.
Use the reaction below for the reaction of dicyanoacetylene with
ozone to produce carbon monoxide and nitrogen.
3C4N2(8) + 403(g) → 1200(8) + 3N2(g).
What volume of CO is produced when 1.20 L of C4N2 reacts?
a 0.300 L CO
b 3.60 L CO
C 14.4 L CO
d 4.80 L CO
Answers
Answer:
D
Explanation:
The volume of carbon monoxide is produced when 1.20 L of dicyanoacetylene reacts is
What is stoichiometry?Stoichiometry of any reaction tells about rhe relative amount of substance present before and after the completion of any chemical reaction.
Given balanced chemical reaction between dicyanoacetylene and ozone to produce carbon monoxide and nitrogen is:
3C₄N₂ + 4O₃ → 12CO + 3N₂
From the stoichiometry of the reaction it is clear that:
3 liters of C₄N₂ = produces 12 liters of CO
1.20 liters of C₄N₂ = produces 12/3×1.20=4.8 liters of CO
Hence option (d) is correct i.e. 4.8 liters.
To know more about stoichiometry, visit the below link:
https://brainly.com/question/16060199
Which describes a value for density
Answers
The substance krypton has the following properties normal melting point 115.9 K normal boiling point: 119.8 K triple point: 0.72 atm. 115.8 K critical point: 54.3 atm. 209.4 K A sample of krypton at a pressure of 1.00 atm and a temperature of 149.2 K is cooled at constant pressure to a temperature of 107.8 K Which of the following are true?
a) The final state of the substance is a solid
b) One or more phase changes will occur
c) The final state of the substance is a liquid
d) The sample is initially a gas
e) The solid initially present will vaporize.
Answers
Answer:
B. One or more phase change occur
C. the final state of substance is liquid
D. the sample initially gas
Explanation:
The pressure p = 1.00 atm
The temperature t = 149.2K
The temperature > 119.8K
119.8K being the normal boiling point.
This shows that the krypton is a gas
After it has cooled the pressure = 1.00 atm
The temperature T dropped to 107.8K
T < 115.9K
The melting point has been put as 115.9K
This is a liquid. The final state of the substance is a liquid. Since the temperature is less than the melting point and the pressure is 1.00 atm
the reaction between potassium metal and water produces potassium hydroxide and hydrogen gas.
the correct equation for this reaction is:
A: K + H2O—> KOH + H2
B: K + H2O—>KOH + H
C: 4K + 3H2O—> 4KOH + 2H
D: 2K + 2 H2O—> 2KOH + H2
Answers
Answer:
2K + 2H₂O → 2KOH + H₂
Explanation:
The reactants are:
Potassium metal = K
Water = H₂O
The products are:
Potassium hydroxide = KOH
Hydrogen gas = H₂
The reaction equation is given as;
Reactants → Products
2K + 2H₂O → 2KOH + H₂
The reaction is a single displacement reaction
.What type of energy includes both kinetic and potential energy?
Answers
Answer:
mechanical energy
Explanation: