This drawing of the field lines between these two charged plates is correct.

True or false

This Drawing Of The Field Lines Between These Two Charged Plates Is Correct.True Or False

Answers

Answer 1

Answer:

True

Explanation:

Since positive and negative forces are both opposites of each other they attract. But if the forces are the same where both are positive or negative thye repel do to being the same charges in that case the picture would show lines moving in opposite directions.


Related Questions

3. What can you infer about the position of the galaxies 100 million years before this telescope photo was taken

Answers

The galaxies are in constant motion so it can be inferred that their position will not be the same as a hundred million years ago.

A galaxy is a term to refer to the set of stars, gas clouds, planets, cosmic dust, dark matter, and energy gravitationally united in a more or less defined structure in the universe.

Galaxies are in constant motion because the elements that make them up are not static at any time; The galaxies rotate around the center of the galaxy. If they were still, the gravitational attraction would cause them to immediately fall towards the center of the galaxy: it is the same that would happen to the Earth and the other planets if they stopped rotating around the Sun, they would fall towards the Sun.

According to the above, it can be inferred that the galaxies after a while have moved from the place where they were last seen.

Note: This question is incomplete because there is some missing information. However, I can answer based on my general prior knowledge.

Learn more in: https://brainly.com/question/15451060

Two objects are being lifted by a machine. One object has a mass of 2 kg, and is lifted at a speed of 2
m/s. The other has a mass of 4 kg and is lifted at a rate of 3 m/s.
a. Which object has more kinetic energy while it is being lifted?

Answers

Answer:

Kinetic energy = (1/2) (mass) (speed²)

First object: (1/2) (2 kg) (2 m/s)² = 4 joules .

Second object: (1/2) (4 kg) (3 m/s)² = 18 joules .

The second object had more kinetic energy than the first one had.

Explanation:

Answer:

Kinetic energy = (1/2) (mass) (speed²)

First object: (1/2) (2 kg) (2 m/s)² = 4 joules .

Second object: (1/2) (4 kg) (3 m/s)² = 18 joules .

The second object had more kinetic energy than the first one had.

2. Jason rode his bike 10 miles and only rode for 2 hours how fast was he going?

Answers

Answer:

5 miles per hour.

Explanation:

10miles / 2hours = 5 mph

PLZ HURRY
When you hold a racquet and swing your arm toward the ball, there are two kinds of resistance working against your muscles—the ______ and the ______.

A.
racket, air

B.
air, ball

C.
ball, net

D.
air, racket

Answers

Answer:

It should just be A

Explanation:

I dont see the difference between these 2 but ill choose A and update you

Answer:

A: racket, air

Explanation:

Name two environmental factors, one natural and one human-made, that could account for the trend or pattern in bird (quail, wren) and rodent (mice, rabbits) populations before 1997. Help!

Answers

Factors such as more crops, fewer predators, invasive species, and changes in the environment explain a decrease or increase in the birds and rodent populations.

Before 1997, both rodents and birds populations increased due to different factors. Moreover, these factors can be classified as natural or human-made factors. Here are the factors that mainly affected these animals:

Bird population:

Increase:

Decrease in predators that increase birds chances to survive (natural factor)

Increase in crops that improve food access for birds (human factor)

Decrease:

Invasive species or increase of predators (natural factor)

Destruction of natural habitats due to an increase in industry and extraction (human factor)

Rodent population:

Increase:

More adaptability that increased rodents chances to survive (natural factor)Increase in crops that improve food access for rodents (human factor)

Decrease:

Invasive species or increase of predators (natural factor)Increase in rabbit consumption and use of rodent control products (human factor)

Learn more in: https://brainly.com/question/18123593

A grinding wheel is a uniform cylinder with a radius of 8.50 cm and a mass of 0.380 kg. Calculate (a) its moment of inertia about its center, and (b) the applied torque needed to accelerate it from rest to 1750 rpm in 5.00 s. Take into account a frictional torque that has been measured to slow down the wheel from 1500 rpm to rest in 55.0 s.

Answers

Hi there!

(A)

A grinding wheel is the same as a disk, having moment of inertia of:

[tex]I = \frac{1}{2}MR^2[/tex]

Plug in the given mass and radius (REMEMBER TO CONVERT) to find the moment of inertia:

[tex]I = \frac{1}{2}(0.380)(0.085)^2 = 0.00137 kgm^2[/tex]

(B)

We can use the rotational equivalent of Newton's Second Law to calculate the needed torque:

Στ = Iα = τ₁ - τ₂

Begin by solving for the angular acceleration. Convert rpm to rad/sec:

[tex]\frac{1750r}{min} * \frac{1 min}{60 s} * \frac{2\pi rad}{1 r} = 183.26 rad/sec[/tex]

Now, we can use the following equation:

ωf = wi + αt (wi = 0 rad/sec, from rest)

183.26/5 = α = 36.65 rad/sec²

τ = Iα = 0.0503 Nm

Since there is a counter-acting torque on the system, we must begin by finding that acceleration:

[tex]\frac{1500r}{min} * \frac{1 min}{60 s} * \frac{2\pi rad}{1 r} = 157.08 rad/sec[/tex]

ωf = wi + αt

-157.08/55 = α = -2.856 rad/sec²

τ₂ = Iα = 0.0039 Nm

Now, calculate the appropriate torque using the above equation:

[tex]\Sigma\tau = \tau_1 - \tau_2[/tex]

[tex]\Sigma\tau + \tau_2 = \tau_1[/tex]

[tex]0.0503 + 0.0039 = \large\boxed{0.054 Nm}[/tex]

An object is at rest on a tabletop. Earth pulls downward on this object with a force equal in magnitude to mg. If this force serves as the action force, what is the reaction force in the action–reaction pair?

Answers

Answer:

Equal reaction from the pair in every action there's an equal and opposite reaction

The item will keep moving at a consistent speed if the object is at rest on a tabletop. Earth pulls downward on this object with a force equal in magnitude to mg.

What is gravitational force?

All mass-bearing objects are attracted by gravitational force. Because it consistently attempts to bring masses together rather than push them apart, the gravitational force is referred to as attractive.

As we know, the gravitational force is given by:

[tex]\rm F = \dfrac{Gm_1m_2}{r^2}[/tex]

Where G is the gravitational constant.

m1 and m2 are masses.

r is the distance between the masses.

It is given that:


An object is at rest on a tabletop. Earth pulls downward on this object with a force equal in magnitude to mg.

As we know,

An object is at rest on a tabletop. Earth pulls downward on this object with a force equal in magnitude to mg and the item will keep moving at a consistent speed.

Thus, the item will keep moving at a consistent speed if the object is at rest on a tabletop. Earth pulls downward on this object with a force equal in magnitude to mg.

Learn more about the gravitational force here:

brainly.com/question/12528243

#SPJ2

A pumpkin is launched in the air and travels at a horizontal velocity of 25 meters per second for 5 seconds. How far does it travel horizontally?

Answers

Answer:

30.3 meters, 172 degrees

Explanation:

To insure the most accurate solution, this problem is best solved using a calculator and trigonometric principles. The first step is to determine the sum of all the horizontal (east-west) displacements and the sum of all the vertical (north-south) displacements.

Horizontal: 2.0 meters, West + 31.0 meters, West + 3.0 meters, East = 30.0 meters, West

Vertical: 12.0 meters, North + 8.0 meters, South = 4.0 meters, North

The series of five displacements is equivalent to two displacements of 30 meters, West and 4 meters, North. The resultant of these two displacements can be found using the Pythagorean theorem (for the magnitude) and the tangent function (for the direction). A non-scaled sketch is useful for visualizing the situation.

Applying the Pythagorean theorem leads to the magnitude of the resultant (R).

R2 = (30.0 m)2 + (4.0 m)2 = 916 m2

R = Sqrt(916 m2)

R = 30.3 meters

The angle theta in the diagram above can be found using the tangent function.

tangent(theta) = opposite/adjacent = (4.0 m) / (30.0 m)

tangent(theta) = 0.1333

theta = invtan(0.1333)

theta = 7.59 degrees

This angle theta is the angle between west and the resultant. Directions of vectors are expressed as the counterclockwise angle of rotation relative to east. So the direction is 7.59 degrees short of 180 degrees. That is, the direction is ~172 degrees.

Which of the following best describes an achievement test that is given at the end of a learning segment to evaluate mastery of objectives?

Answers

Answer

An Achievement test is an assessment of developed knowledge or skill. ... Achievement tests are developed to measure skills and knowledge learned in a given grade level, usually through planned instruction, such as training or classroom instruction. Achievement tests are often contrasted with aptitude tests.

Explanation:

What’s Newton’s second law? Explain and mention some examples in daily life

Answers

Newton’s second law of motion is force equals mass times acceleration.

F = m•a

An example of this would be hitting a ball. If you hit the ball, it will move however fast you hit the ball. The harder you hit the ball, the faster it will move.

hope this helps and brainliest please

Answer:

Newton's second law states that .

The rate of change of linear momentum is directly proportional to the force applied.

Formulically

F=ma

F=Force

m=mass

a=acceleration

The best example is hitting a tennis ball.

:)))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))

Answers

Good morning dear...

Have a beautiful and joyful day ahead.

The tires of a car make 77 revolutions as the car reduces its speed uniformly from 95.0 km/h to 65.0 km/h. The tires have a diameter of 0.90 m.
If the car continues to decelerate at this rate, how far does it go? Find the total distance.

Answers

Answer:

Explanation:

95.0 km/hr = 26.39 m/s

65 km/hr = 18.06 m/s

Circumference of a tire is 0.9π m

77 revolutions is a distance of

77(0.9π) = 69.3π m

v² = u² + 2as

a = (v² - u²) / 2s

a = (18.06² - 26.39²) / (2(69.3π))

a = -0.85 m/s²

s = (v² - u²) / 2a

s = (0² - 26.39²) / 2(-0.85)

s = 409 m

*graph is below*

1. What is Peter’s total distance traveled? What is Peter's displacement?

2. Is there a time when Peter is not moving? If so, when?

Answers

The total distance covered is 24 Km and Peter was not moving between the points marked 10 mins and 30 mins on the graph. His displacement according to the graph is zero.

The distance time graph shows the distance covered plotted on the vertical axis against the time taken plotted on the horizontal axis. Using this graph, the total distance covered can easily be obtained.

The total distance covered is 12 km + 12 km since equal distance was covered to and fro. Hence the total distance covered is 24 km. Perter was not moving between the points marked 10 mins and 30 mins on the graph.

Learn more: https://brainly.com/question/8646601

In an oscillating LC circuit, when 86.6% of the total energy is stored in the inductor's magnetic field, (a) what multiple of the maximum charge is on the capacitor and (b) what multiple of the maximum current is in the inductor

Answers

We have that for the Question "(a) what multiple of the maximum charge is on the capacitor and (b) what multiple of the maximum current is in the inductor"  

Answer:

a) maximum charge =  [tex]0.366Q_{max[/tex]b) maximum current = [tex]0.931I_{max}[/tex]

From the question we are told

In an oscillating LC circuit, when 86.6% of the total energy is stored in the inductor's magnetic field

A) When 86.6\% energy is stored in inductor

[tex]\%[/tex]of energy stored in electric field = [tex]1 - 0.866 = 13.4\%[/tex]

[tex]\frac{V_E}{V} = \frac{\frac{q^2}{2c}}{\frac{Q^2}{2c}} = 0.134\\\\\frac{q}{Q} = \sqrt0.134\\\\\frac{q}{Q} = 0.366\\\\q = 0.366Q_{max[/tex]

B)

[tex]\frac{V_B}{V} = \frac{\frac{Li^2}{2}}{\frac{LI^2}{2}} = 0.866\\\\\frac{i}{I} = \sqrt0.866\\\\\frac{i}{I} = 0.931\\\\i = 0.931I_{max[/tex]

For more information on this visit

https://brainly.com/question/23379286

determine the total current on the circuit bellow

Answers

Answer:

  170/179 A ≈ 949.7 mA

Explanation:

Finding equivalent impedance of a bridge network can be simplified by converting one end of it from a Δ to a Y configuration. The equivalent resistance in the Y connection is the product of the two resistors connected to that node, divided by the sum of all three resistors.

Considering the left side of the top two branches, the equivalent Y network values are ...

  (10)(15)/(10+15+25) = 150/50 = 3 . . . ohms

connected to the right-end node

  (25)(10)/50 = 5 . . . ohms

connected to the top-center node, and ...

  (25)(15)/50 = 7.5 . . . ohms

connected to the center node of the middle branch.

__

Then the top two branches of this circuit have an equivalent impedance equal to 3 ohms in series with the parallel combination of (5+20) ohms and (7.5+10) ohms. That value is ...

  3 + (25)(17.5)/(25 +17.5) = 226/27 ≈ 13.294 . . . ohms

This, in turn, is in series with the 2.5 ohms in the bottom branch, bringing the total circuit resistance to about 15.794 ohms, or 537/34 ohms.

The total source current is then ...

  I = V/R = (15 v)/(537/34 Ω) = 170/179 A ≈ 0.9497 A

_____

Alternate solutions

Alternatively, you can write and solve three node or loop equations for this circuit. For example, the equations for CCW loop currents, with I1 as the bottom loop, could be written in augmented matrix form as ...

  [tex]\left[\begin{array}{ccc|c}27.5&-10&-15&-15\\-10&55&-25&0\\-15&-25&50&0\end{array}\right][/tex]

The result is the same.

What are the two factors that affect the frictional force between objects

Answers

Answer: The factors that affect the friction between two surfaces are the weight of the object and the coefficient of friction of the surface.

A car C moving with a speed of 65 km/h on a straight road is ahead of motorcycle M moving with the speed of 80 km/h in the same direction. What is the velocity of M relative to A?

Answers

Answer:

The answer is 15. Step by step is you times 80 by 65 and then you divided by 2 and you call your teacher

The current in the long wire is decreasing. What is the direction of the current induced in the conducting loop below the wire

Answers

Answer:

anlatamadım herkeze ben sorulara bakamiyorum cumku analmaiyirum yardim edin

bu sorunu nasil cozebilirim

lutfsn...


How much force must be applied to push a 1.35 kg book across the desk at constant speed if the coefficient of sliding friction is 0.30?

Answers

The magnitude of the force that must be applied to push the book across the desk is 3.97 N.

The given parameters;

mass, m = 1.35 kgcoefficient of friction, μ = 0.3

The acceleration of the book across the desk is calculated as follows;

a = μg

where;

g is acceleration due to gravity

a = 0.3 x 9.8

a = 2.94 m/s²

The magnitude of the force that must be applied is calculated as follows;

F = ma

F = 1.35 x 2.94

F = 3.97 N

Thus, the magnitude of the force that must be applied to push the book across the desk is 3.97 N.

Learn more about applied force here:https://brainly.com/question/2733221

The force of earth’s gravity is 10N downward. What us the acceleration of a 15kg backpack if lifted with a a 15N force?

Answers

Answer:

F-F(gr) = ma

a= {F-F(gr)}/m =

=(15-10)/15=0.33 m/s² (upward)

You have a 25 W and a 100 W bulb at home. When you connect one or the other, which bulb carries the greater current

Answers

Answer:

100 w bulb has more current.

Explanation:

P=V^2/R.

when velocity is constant power is inversly proportional to resistence, so 25 W will have an hogher resistance tjan a 100 w bulb.

P=VI

when v is constant, power is directly proportional to I. hence, 100 w bulbs will carry more current.

When you connect one or the other, the bulb that's connected carries more current than the one that's not connected.

When you connect BOTH of them, the 100W bulb carries more current than the 25W one.

During a picnic, you and two of your friends decide to have a three-way-tug-of-war, with three ropes in the middle tied into a knot. Roberta pulls to the west with 277 N of force; Michael pulls to the south with 603 N. a) With what force should you pull to keep the knot from moving

Answers

Answer:

Explanation:

I'm not 10% sure but i think that if you were to do:

603 + 277 = 880

1000 - 880 = 120

So to keep it from moving, i think you would need to pull with a force of 120N

The force with which it should be pulled to keep the knot from moving is 663.58 N.

What is Newton's third law ?

Newton's third law states that, for every action, there is an equal and opposite reaction.

Here,

Force exerted by Roberta, F₁ = 277 N

Force exerted by Michael, F₂ = 603 N

Since, Roberta is pulling to the west and Michael is pulling towards the south, the angle between the forces applied by them is 90°.

The force needed to keep the knot from moving is the resultant force of these two forces.

Therefore, the resultant force,

Fₙ = √F₁² + F₂²

Fₙ = √(277)² + (603)²

Fₙ = 663.58 N

Hence,

The force with which it should be pulled to keep the knot from moving is 663.58 N.

To learn more about Newton's third law, click:

https://brainly.com/question/29768600

#SPJ2


10. On Earth, where is hydrogen not found?
A. Natural gas well
B. Water
C. Atmosphere
o D. Minę

Answers

Answer:

i think its D or B

Explanation:

i just think

On Earth,in atmosphere the hydrogen is found in the less quantity. Option C is correct.

What is hydrogen?

The chemical element hydrogen has the atomic number 1 and the symbol H. The smallest element is hydrogen.

Hydrogen is found in large numbers on Earth in combination with other elements, such as water and hydrocarbons, yet it is only 0.00005 percent present in Earth's atmosphere.

On Earth,in atmosphere the hydrogen is found in the less quantity.

Option C is correct.

To learn more about the hydrogen refer:

https://brainly.com/question/11837837

#SPJ2

Suppose that you release a small ball from rest at a depth of 0.590 m below the surface in a pool of water. If the density of the ball is 0.370 that of water and if the drag force on the ball from the water is negligible, how high above the water surface will the ball shoot as it emerges from the water? (Neglect any transfer of energy to the splashing and waves produced by the emerging ball)

Answers

Answer:

Explanation:

The work of the buoyancy force will convert to gravity potential energy

Fresh Water has a density of 1000 kg/m³

The ball has a density of 370 kg/m³

assume the ball is 1 m³

weight of the ball is 370g

The buoyancy force is 1000g

Assume the buoyancy force drops suddenly to zero when the center of the ball clears the water level.

The Work done on the ball is

W = Fd = 1000g(0.590)

the change in potential energy is

PE = mgh = 370g(0.590 + y)

where y is the height above the water level.

1000g(0.590) = 370g(0.590 + y)

1000(0.590) = 370(0.590 + y)

y = (0.590)(1000 - 370) / 370

y = 1.004594... ≈ 1.00 m

Heat is transferred from molecules with more kinetic energy to molecules with _________kinetic energy.

Answers

Answer:

less

Explanation:

heat travels from hotter to colder object. hotter object has more kinetic energy.

Which processes result in the release of carbon? Select three options.

Animals break down food molecules to obtain energy.
The remains of producers are broken down by decomposers.
The remains of consumers are broken down by soil decomposers.
Producers take in carbon dioxide.
Producers make sugars and starches.

Answers

Answer:

The remains of producers are broken down by decomposers.

The remains of consumers are broken down by soil decomposers.

Animals break down food molecules to obtain energy.

Explanation:

Answer:

It is A. B. and C.

Explanation:

Hope this helps

How much heat must be removed from 1.61 kg of water at 0 ∘C to make ice cubes at 0 ∘C?

Answers

Answer:

Explanation:

All

HELP ASAPPPPPPPPPPPPPP

Answers

Answer:

F=15N

Explanation:

F=m.a

m=1500g ÷1,000 = 1.5kg

a= 10m/s/s

F =1.5 × 10

F = 15 Newton

Given the force diagram of the basketball, what can you tell about the basketball motion?

Answers

Newton's laws allow to find the result for the movement of the basketballl:

On the vertical axis the ball is on the ground. On the horizontal axis the ball is accelerating in the direction of the pushing force.

Newton's laws establish the relationship between the forces on objects:

The 1st law states that if the net force is zero the object is stationary or with constant speed. The 2nd law gives a relation of the force with the mass and the acceleration of the body. The 3rd. Law states that the force appears in pairs, one on each body with the same magnitude, but in the opposite direction.

Let's apply these principles to the ball's motion diagram.

The two vertical forces are in the opposite direction, one is due to the weight of the body and the other is the attraction of the earth to the support of the ball, they are of equal magnitude, not their action-reaction force and reluctant because it is applied to the same body

       In conclusion we can say that the ball is on the ground.

The two horizontal forces are in the opposite direction, the thrust force is greater than the friction therefore using Newton's second law the ball must be accelerating in the direction of the thrust force.

       In conclusion we can say that the ball is accelerating in the direction of the pushing force.

In conclusion using Newton's laws we can find the result for the motion of the basketball:

On the vertical axis the ball is on the ground. On the horizontal axis the ball is accelerating in the direction of the pushing force.

Learn more about Newton's laws here:  brainly.com/question/3715235

5 What is the maximum speed at which a car round a curve of 25m radius on a level road if the coefficient of static friction between the tires and the road is 0.80?​

Answers

Hi there!

On a level road:

∑F = Ff (Force due to friction)

The net force is the centripetal force, so:

mv²/r = Ff

Rewrite the force due to friction:

mv²/r = μmg

Cancel out the mass:

v²/r = μg

Solve for v:

v = √rμg

v = √(25)(9.81)(0.8) = 14.01 m/s

Other Questions
There are 12 boxes of books to put on shelves. Each box has 31 books.Each shelve holds 18 books. Kevin estimates he will need 20 shelves for all the books The recipe for a holiday punch calls for 7 cups of fruit drink and 3 cups of ginger ale.Suppose you want to make as much punch as you can using all of the fruit drink youhave, which is 32 cups. How many cups of ginger ale would you need?A)9.1B)74.7C)22.9D)13.7 does anyone know the answer? Hemp help help help English please Please help me will give points What was the role of the Protestant Reformation in the growth of the Scientific Revolution? Describe three similarities and three main differences between the qualifications andprivileges of members of the House of Representatives and the Senate? On October 1, Organic Farming purchases wind turbines for $140,000. The wind turbines are expected to last six years, have a salvagevalue of $20,000, and be depreciated using the straight-line method.1. Compute depreciation expense for the last three months of the first year.2. Compute depreciation expense for the second year. whats obamas last name The author presents his opinion about what students should get from college. What do youthink is the purpose of college? If you decide to go to college, what do you want to get outof it? When waves are closer together, the distance between them is _________, therefore the waves have __________ wavelength. Plot details in a drama can be revealed throughNeed Answer ASAPA Characters ActionsB Stage DecorationsC Curtains Design D Non of the above what is the answer ??????????fast Explain what it meant for England to become a commonwealth. Let us ___ to God in order to show our greatfulness.Select one:a. to give thanksb. giving thanksc. give thanksd. thanks Homeostasis is an organism's ability to _______. a. obtain energy from food b. interact with its specific environment c. maintain a constant internal environment d. survive without water for long periods of time The sum of two numbers is 65. The larger number is 5 more than the smaller number. What are the numbers? Power SupplyDescription : 1. True False Many presidents have studied law but Herbert Hoover was an engineer. 2. True False Hoover and his wife spent many years working at gold mines in South Africa. 3. True False Hoover, a Republican, worked in the administration of Democratic President Woodrow Wilson. 4. True False Hoover attended the Versailles Peace Conference at the end of World War I. 5. True False Hoover was Secretary of Standards for President Warren Harding. 6. True False Hoover was the vice presidential candidate with Calvin Coolidge. 7. True False Hoover was not re-elected president because of the Great Depression. 8. True False One of the causal factors in the Great Depression was World War I. 9. True False Hoover lost his bid at re-election to Theodore Roosevelt. 10. True False The American people blamed Hoover for not stopping the Great Depression. You get to write the script for your favorite TV shows Thanksgiving episode! Write a summary of the plot of the episode you would write.