Track Block A student must determine the inertial mass of a block attained to a horizontal track. The block is free to move horizontally along the track, as shown above, Frictional forces are considered to be negligible. The student may only choose two measuring tools to determine the inertial mass of the block. What tools should the student choose? Select two answers.
a. Stopwatch
b. Accelerometer
с. Force sensor
d. Meterstick

Answers

Answer 1

The student should choose accelerometer and force sensor for the determination of the inertial mass of the block.

Inertia can be define as the tendency of an object to resist acceleration or we can say tendency of an object to change its state of motion. Inertial Mass is therefore a measure of an object's inertia.

We can also say that inertial mass measures the tendency to resist change in state of motion. The more mass of an object means, the more it resists acceleration. So, it has more inertia.

An accelerometer is an electronic sensor to measure the acceleration forces on an object. It is used to determine the object’s position in space and also to monitor the object’s movement.

A Force Sensor is a transducer to convert an input mechanical load, weight, tension, compression or pressure into an electrical output signal.

To know more about force sensor here

brainly.com/question/28906632

#SPJ4


Related Questions

Which of the waves has the smallest amplitude?
A. The blue wave
B. The orange wave
C. The green wave
D. The red wave

Answers

Answer:

I think its the Blue wave, im not sure so dont take my word for it.

Explanation:

Answer: it’s the green wave

Explanation: trust me bro

PLEASE ANSWER THIS ASAP I WILL MARK YOU THE BRAINLIEST The actual subject is Science but they dont have that as a option in pick a subject

Answers

Answer:

Answer 4, 11k/min

Explanation:

From 0 - 1 km, it took 12 minutes

From 1 - 2 km, it took 10 minutes.

10 + 12 = 22

Divide the time by 2 km. 22/2 = 11

The answer is the last one which is 11km/min

WILL MAKE BRAINLIEST! How does Hooke’s law help us understand the force and energy in elastic materials?

Answers

Answer:

How does Hooke’s law help us understand the force and energy in elastic materials?:

When the elastic materials are stretched, the atoms and molecules deform until stress is been applied and when the stress is removed they return to their initial state

Explanation:

A girl kicks a blue ball with a velocity of 20.0 m/s at 65.0o. How long is it in the air?


1.85s

1.92s

13.6s

3.69s

Answers

Explanation:

t = usin©/g

Where t is the time to reach the maximum height

Time spent in air is T = 2t

Hence, T = 2usin©/g

T = 2 x 20 x sin 65°/ 9.8

T = 3.69s

A car hits a wall with a force of 80 N and
has a mass of 4.5 kg. What was the
acceleration of the car?

Answers

Formula for acceleration: A=Force/Mass
A=F/M
A=80N/4.5kg
A=17.7 m/s^2

Unit for A is meters per second (m/s^2)
Hope this helps :)

Please help Draw where the rays will go and label the type of mirror.

Answers

Answer:

Explanation:

Please check the picture and consider straight lines

Bill drives west at 20\, \dfrac{\text m}{\text s}20 s m ​ 20, start fraction, start text, m, end text, divided by, start text, s, end text, end fraction, then slows to a stop at the red light. A graph of his velocity over time is shown below, where eastward is the positive velocity direction.

Answers

Answer:

This

Explanation:

Khan academy answer

A roller coaster has a mass of 250 kg,
and is 50 meters above the ground, what
is the potential energy?

Answers

Potential Energy = mass x gravity x height
PE = mgh
PE = 250kg x 9.8 m/s^2 x 50m
PE = 118,750 joules = 118kJ

A roller coaster has a mass of 250 kg, and it is 50 meters above the ground, then the potential energy will be equal to 122.5 KJ.

What is Potential energy?

Potential energy is a type of energy stored that depends on the interaction between various substances. A spring's energy rises when it is crushed or expanded. A steel ball has more energy stored if it is lifted just above the floor as contrasted to dropping to the ground. As raised, it can do greater labor.

Instead of being a property of specific entities or atoms, potential energy is a property of systems. For instance, a system made up of Earth and the raised ball has far more stored energy as they move apart.

In system components, where the configurations, or spatial arrangements, dictate the magnitude of the forces that apply against one another, potential energy arises.

From the data given in the question,

Mass, m = 250 kg

Height, h = 50 meters and,

g = 9.8 m/s²

[tex]Potential energy(PE)=mgh[/tex]

PE = 250 × 50 × 9.8

PE = 122500 J or,

PE = 122.5 KJ.

To know more about Potential energy:

https://brainly.com/question/24284560

#SPJ2

I have an unknown volume of gas at a pressure of 0.500 atm and a temperature of 325 K. If I raise the pressure to 1.20 atm, decrease the temperature to 320. K, and measure the final volume to be 48.0 liters, what was the initial volume of the gas?

Answers

Answer:

117

Explanation:

the formula is P1V1 over T1 is equals to P2V2 over T2

Which of the following terms describes the area where the Himalaya Mountains formed?

A.Divergent Boundary
B.Convergent Boundary
C. Subductive Zone
D. Transform Boundary

Answers

Answer:

B

Explanation:

The Himalayan Mountains formed at a convergence plate boundary between the Eurasian plate and the Indian plate.

PLEASE ANSWER THIS ASAP I WILL MARK YOU THE BRAINLIEST The actual subject is Science but they dont have that as a option in pick a subject

Answers

Answer:

I believe it is D. Based on the point and it being Position vs. time I believe D makes the most sense. Sorry if I am wrong!

Explanation:

Answer:

25/30 = 0.83

Explanation:

I took this class

A sphere is released into the atmosphere where air resistance is present. As it falls it loses 7J of potential energy. How much kinetic energy did it gain?

Answers

Answer:

7 J

Explanation:

Given that,

A sphere is released into the atmosphere where air resistance is present.

The lose in energy is equal to 7 J

We need to find the gain in its kinetic energy.

We know that, as per the law of conservation of energy,

Loss in potential energy = gain in kinetic energy

Gain in kinetic energy = 7 J

Hence, the gain in kinetic energy is 7 J.

This graph shows the energy of a reaction over time. Which statement is
true?


A. H represents the energy of the products.

B. G represents the activation energy.

C. G represents the energy of the products.

D. F represents the activation energy

Answers

Answer: D.

Explanation: Just took the quiz.

Answer:

D. F represents the activation energy

Explanation:

What type of energy is thermal energy? A. Sound energy B. Chemical energy C. Kinetic energy D. Nuclear energy

Answers

Answer:

kinetic energy

Explanation:

Define the term kinetic frictional force​

Answers

Answer:Kinetic friction is defined as a force that acts between moving surfaces. A body moving on the surface experiences a force in the opposite direction of its movement. The magnitude of the force will depend on the coefficient of kinetic friction between the two material.

Explanation:

How far is it between the cafeteria and the swimming pool
A.
length
B.
volume
C.
distance
D.
displacement

Answers

C distance

Explanation:

A 12.0 volt battery is connected in a series to 4 identical 5.00 ohm resistors connected in parallel to each other. What is the current through the battery?

Answers

Answer:

9.6 Amperes

Explanation:

since the resistors are connected in parallel connection the equivalent resistance is

1/R = 1 /5 + 1/5 + 1/5 + 1/5

solving for R we get 5/4 ohms

then from V=IR

I = V/R

I=12/(5/4)

hence I= 9.6 Amperes

A 12.0-volt battery is connected in a series, then the current through the battery is 9.6 A.

What are Resistors?

Electrical resistance is implemented as a circuit element by resistors, which are passive two-terminal electrical components. Resistors are devices that are used in electronic circuits for a variety of purposes, including lowering current flow, adjusting signal levels, dividing voltages, biasing active components, and terminating transmission lines.

As part of motor controllers, power distribution systems, or as test loads for generators, high-power resistors that can dissipate many watts of electrical energy as heat may be used.

According to the question,

1/R = 1 /5 + 1/5 + 1/5 + 1/5

R = 5/4 ohms

By ohm's law,

V=IR

I = V/R

I=12/(5/4)

I= 9.6 Amperes

To get more information about Resistors :

https://brainly.com/question/24297401

#SPJ6

Two balls are rolling using the same force. Which law explains why the bowling ball will roll a shorter distance than a soccer ball ?

1. Newton's 1st law

2. Newton's 2nd law

3. Newton's 3rd law

Answers

Answer:

newton's 2nd  law

Explanation:

In the first law, an object will not change its motion unless a force acts on it. In the second law, the force on an object is equal to its mass times its acceleration. In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction.


Which of the following scenarios would result in an increase of kinetic
energy?*

A) An object at rest at a height of 10 meters
B) A car accelerating from 10 m/s to 20 m/s
C) A car coming to a stop

Answers

B) car accelerating from 10 to 20

Answer:

B) A car accelerating from 10 m/s to 20 m/s

Explanation:

I explained this yesterday.

What is the momentum of a 200 kg truck travelling at 20 m/s?

Answers

Answer:

p = 4000 kg-m/s

Explanation:

Given that,

The mass of a truck, m = 200 kg

Speed of the truck, v = 20 m/s

We need to find the momentum of the truck. The formula for momentum is given by :

p = mv

so,

[tex]p=200\times 20\\\\p=4000\ kg-m/s[/tex]

So, the momentum of the truck is equal to 4000 kg-m/s.

PLEASE HELP!!!!!!!!!!!!!!!!Match the label with the reason it might be important to the consumers.
1. country of origin
Kelli only buys vegetables grown
without pesticides.
Angie only buys foods made with
2. Organic Certification
sea salt to cut sodium intake.
3. dietary guideline
Nikki prefers to buy local products
to lessen her carbon footprint.

Answers

Answer:

1 is Nikki

2 is Kelli

3 is Angie

Explanation:

Hope this helps!

why is fluorine more chemically reactive than
nitrogen?

Answers

And fluorine requires only 1 electron to complete it's octet to get stable.. whereas,nitrogen don’t.Therefore Fluorine is more reactive and less stable than Nitrogen

Answer:

Nitrogen has Electronic configuration 1s2 2s2 2p3. Fluorine has Electronic configuration 1s2 2s2 2p5 i.e. nitrogen has half filled p subshell that makes it more stable than fluorine and fluorine requires only 1 electron to complete it's octet to get stable..Therefore Fluorine is more reactive than Nitrogen.

Hope it helps you

The acceleration due to gravity on the Moon's surface is known to be about one-sixth of the acceleration due to gravity on the Earth.
A rock falls under a gravitational force of 16.3 N on the moon.
Please help me figure out the mass of the rock.

Answers

Answer:

The mass of the rock is approximately 9.97 kg

Explanation:

From the question, we have;

The acceleration due to gravity on the Moon = (1/6) × The acceleration due to gravity on the Earth

The gravitational force under which a rock falls on the Moon = 16.3 N

The acceleration due to gravity on Earth, g ≈ 9.81 m/s²

Therefore, the acceleration due to gravity on the Moon, a = (1/6) × 9.81 m/s² ≈ 1.635 m/s²

The relationship between the force with which the rock falls and the acceleration of the motion resulting in the force is given by the following relationship;

F = m × a

Where;

F = The force = 16.3 N

m = The mass of the object acted on by the force = The mass of the rock

a = The acceleration of the motion of the object = 1.635 m/s²

From F = m × a, we have;

m = F/a

∴ m = 16.3 N/(1.635 m/s²) = 9.96941896 kg

The mass of the rock, m ≈ 9.97 kg.

HELP pleaseee which nucleus completes the following equation?

Answers

Answer:

its D

Explanation:

i just got it correct on a. p. e. x. :)

Which describes the motion in a convection current? horizontal motion only vertical motion only linear motion circular motion

Answers

Answer:

circular motion

Explanation:

Circular motion can be regarded as

movement of particular object along the circumference in a circle. It is

rotation of particular object along a circular path. Circular motion could be

uniform, along with constant angular rate of rotation as well as constant speed. It could also be non-uniform along with changing rate of rotation. The acceleration that is been experienced when one is in uniform circular motion is called"Centripetal acceleration"

Convection currents is type of current that takes place after a reservoir of fluid has been heated at the bottom, then cool at the top.the fluid expand as a result of Heat , then density decreases, the plates on top of them is been carried as a result of circular motion of the convection

A convention current is a circular movement which is set up due to temperature difference between two layers of a fluid.

What is a convection current?

A convention current is a movement which is set up due to temperature difference between two fluids.

Convection currents are set up in liquids and gases.

Hotter and less dense fluids move upwards while colder and denser fluids move downwards.

Therefore, convection currents involve circular motion.

Learn more about convection currents at: https://brainly.com/question/25957304

how slow would a 60,000 kg freight car have to roll to have the same momentum as an 80 kg person running 6.5 m/s

Answers

(8 and 2/3) millimeters per second.

That's about 0.02 mile per hour.

A proton travels through uniform magnetic and electric fields. The magnetic field is in the negative x direction and has a magnitude of 2.48 mT. At one instant the velocity of the proton is in the positive y direction and has a magnitude of 1840 m/s. At that instant, what is the magnitude of the net force acting on the proton if the electric field is (a) in the positive z direction and has a magnitude of 5.19 V/m, (b) in the negative z direction and has a magnitude of 5.19 V/m, and (c) in the positive x direction and has a magnitude of 5.19 V/m

Answers

Answer:

a)   F = 15.6 10⁻¹⁹  k^   N,  b)  F = -1  10⁻¹⁹  k^   N,

c)  F = (8.3 i^ + 73 k^) 10⁻¹⁹ N

Explanation:

In this exercise we calculate the magnetic and electric force separately.

Let's start by calculating the magnetic force

       F_m = q v x B

where bold letters indicate vectors, the modulus of this expression is

       F_m = q v B

the direction is given by the right hand rule, where the thumb points in the direction of velocity, the fingers are extended in the direction of the magnetic field and the palm is in the directional ne force if the charge is positive

let's calculate the magnitude

      F_m = 1.6 10⁻¹⁹  1840  2.48 10⁻³

      F_m = 7.3 10⁻¹⁹ N

we calculate the direction, the thumb is in the direction of + y,

fingers extended in the direction of -ax

the palm remains + z

therefore the magnetic force is in the direction of the positive side of the z axis

The electric force is

        F_e = q E

give several possibilities for the electric field

a) electric field E = 5.19 V / m in the direction of + z

we calculate

        F_e = 1.6 10⁻¹⁹ 5.19

        F_e = 8.3 10⁻¹⁹ N

the total force is

       F = F_m + F_e

       F = (8.3 k ^ + 7.3 k ^) 10⁻¹⁹

       F = 15.6 10⁻¹⁹  k^   N

b) in the -z direction

       F_e = -8.3 10⁻¹⁹ k^   N

       F = Fm + Fe

       F = (-8.3 k ^ + 7.3 k ^) 10⁻¹⁹

       F = -1  10⁻¹⁹  k^   N

c) in the + x direction

       F_e = 8.3 10⁻¹⁹  i^   N

the total force is

       F = (8.3 i^ + 73 k^) 10⁻¹⁹ N

Calculate the refractive index for a substance where the angle of incidence is 300 , the angle of refraction is 600 , and the refractive index of second substance is 1.5

Answers

Answer:

η₁ = 2.6

Explanation:

Here, we will use snell's law to calculate the refractive of the substance:

[tex]\frac{\eta_2}{\eta_1} = \frac{Sin\theta_1}{Sin\theta_2}[/tex]

where,

η₁ = refractive index of first substance = ?

η₂ = refractive index of second substance = 1.5

θ₁ = angle of incidence = 30°

θ₂ = angle of refraction = 60°

Therefore,

[tex]\frac{1.5}{\eta_1} = \frac{Sin\ 30^0}{Sin\ 60^0}[/tex]

η₁ = 2.6

Can anybody help??????

Answers

Answer:

b

Explanation:

I think its b, a molecule

What is the equivalent of 0° C in Kelvin?
Help will give brainiest

Answers

Answer:

273.15 dat is the answer im pretty sure

Other Questions
A series circuit has a combination of two resistors, one 7.25 ohm's and the other 4.50 ohm's.They are connected to a 9-volt battery. What is the equivalent resistance of the circuit? A bottle of soap costs $3.45 for 64ounces. What is the cost per ounce? Lydia routinely gets massages to increase flexibility, reduce fatigue, improve endurance, and prevent injuries. What kind of massage does Lydia get? Which is equivalent to x2 - 4x = 12 by completing the square Musical form is created when the different elements of music in a composition are arranged and combined into sections Can some please help me on question 2 I am just confused. What was one cause of the causes Kumeyaay revolt at San Diegode Alcal? What is the average weight of the kittens in the shelter?Pls help Select the value of x that makes the equation 16 = -4(x - 1) + 4 true? -2 2 -4 4 bastante es aguda, llana, o esdrujula? Emma bought three cans of tennis balls for $4 each. Sales tax for all three cans was $0.95. Whexpression shows what Emma paid? What is the slope of a line parallel to the line whose equation is 9x+3y=-27 Fully simplify your answer. Compare the functions shown below: g(x) f(x) = 3x + 2 cosine function with y intercept at 0, negative 3 h(x) = 4 sin(2x + ) + 3 Using complete sentences, explain which function has the greatest y-intercept. help is appreciated as soon as possible, look at the photo! Whether someone with a diathesis develops the disorder is determined by Use the scale drawing to determine how wide the duck pond is? A. 7 feet B. 14 feet C. 28 feet D. 42 feet PLS HELP I WILL MARK THE BRAINLIEST. 1. What is a common example of a converging mirror?2. Where must you (the object) stand in front of a converging mirror if you want to see an upright,virtual image of yourself? What is the size of the image compared to the object?3. A converging mirror produces no image when the object is at4. If the centre of curvature in a converging mirror is at 10cm, the focal point will be atom Which class lever is called force multiplier and why? complete the table by listing some situations where it is easier when u demonstrate patience