the answer would be false
Answer:true
Explanation:becuase yes
why is electricity always regarded as a good servant but a bad master
Answer:
Electricity is a good servant if you use it cleverly and carefully, because it give you millions of millions of services. But if you are careless and negligient, it will rule over you and may cause many disasters. Hence it is a bad master when dominating over you.Explanation:
How many meters is equivalent to a mile? Give your answer to the nearest meter.
Answer:
Around 1609 meters.
Explanation:
1609.3 meters rounded to 1609.
PLEASE ANSWER ASAP!
when driving, what is the difference between the white lines and the yellow lines
Answer:
Please check the explanation.
Explanation:
While driving, white lines would require us to stay within the lane, also marking the shoulder of the roadway.
While yellow lines generally mark the center of a two-way road being used for two-way traffic.
We generally can pass on a two-way road if the yellow centerline is broken.
Answer:
Solid White Line: requires you to stay within the lane and also marks the shoulder of the roadway. YELLOW LINES mark the center of a two-way road used for two-way traffic. You may pass on a two-way road if the yellow centerline is broken.
What is the function of engineers?
To work as mediators between the scientists, politicians, and marketing experts who provide them with problems and specifications
To theorize about better technology in order to generate ideas.
To use math to identify gaps in our current products and then develop improvements.
To identify the issues in our world and better them.
Answer:
To add technology and advancements to society and make out community more advanced.
Explanation:
Answer:
A
Explanation:
edge 2021
Attempting to improve mobility for paralyzed people is an example of which of the following?
a. a hypothesis
b. applied research
c. basic research
d. the scientific method
Answer: B. applied research
When designers make compromises during the Engineering Design Process, this is called
O Additional criteria
O More constraints
O Increased efficiency
O A trade-off
Answer: A trade off
Explanation:
Criteria is simply a product's identified characteristics or elements. Constarints are the limitation to a product's design.
A trade off is a decision that's taken in order to gain a particular things at the expense of something else. A trade off is when designers make compromises during the Engineering Design Process.
Therefore, the correct option is D.
A 1/4" nut driver with a 1.52 inch diameter handle is used to install a 14" 6 UNC
bolt into a robotic arm.
Determine the circumference where the effort is applied.
sion
Round to the nearest 0.00
Answer:
2.23
Explanation:
so wee add
Which lists the order of Energy Career Pathways from the source to the customer?
A. Energy Generation, Energy Transmission, Energy Distribution
B. Energy Distribution, Energy Transmission, Energy Generation
C. Energy Generation, Energy Distribution, Energy Transmission
D. Energy Transmission, Energy Generation, Energy Distribution
Answer:
answer is A. EG,Et, and Ed
Explanation:
Answer:
(A) Energy Generation, Energy Transmission, Energy Distribution
Who has good grades in school like A's B's dm me
Answer:
I do
Explanation:
a chance for free brainlist
Answer:
alrighty yall
Explanation:
All of the statements are true EXCEPT:
Select one:
A. Pascal's law is the principle behind hydraulic brakes.
0 B. varying amounts of mechanical force can be extracted from a single
amount of hydraulic pressure.
C. the smaller brake caliper pistons on the front wheels give greater
mechanical force and braking power to the front wheels.
O D. a power booster is fitted to the brake system to increase the driver's
brake pedal force to the master cylinder.
Answer:
the smaller brake caliper pistons on the front wheels give greater mechanical force and braking power to the front wheels.
All of the aformentioned statements are correct and true except: C. the smaller brake caliper pistons on the front wheels give greater mechanical force and braking power to the front wheels.
What is a braking system?A braking system can be defined as a mechanical system which comprises various components that are designed and developed to bring an automobile vehicle in motion to a stop, when applied by a driver.
Basically, the principle behind hydraulic braking system is Pascal's law, which states that a varying degree of mechanical force can be generated from an amount of hydraulic pressure.
Read more on braking system here: https://brainly.com/question/24751467
The use of seat belts in cars has significantly reduced the number of crash
fatalities. Which statement best explains how societal demand guided the
development of seat-belt technology?
A. Engineers improved the design of seat belts because consumers
wanted them to be easier to use.
B. Car manufacturers recognized the dangers of not wearing seat
belts in cars and then lobbied the government to make laws that
required their use.
C. Engineers developed seat-belt technology and then began a public
awareness campaign to educate people on how they could be
used to make cars safer.
D. When new seat-belt technology became available, consumers
began to demand their inclusion in all new cars.
Answer:
A. Engineers improved the design of seat belts because consumers wanted them to be easier to use
The statement best explains how societal demand guided the development of seat-belt technology is A. Engineers improved the design of seat belts because consumers wanted them to be easier to use.
Seat-belts are important in order to reduce the impact of a person getting injured in case there's an accident.It should be noted that when seatbelts were first introduced, they were not easy to use and this was challenging for consumers.Due to the advances and new innovations by engineers, the design of seat belts has become easier to use. Even children can use seatbelts easily now.Therefore, engineers improved the design of seat belts because consumers wanted them to be easier to use.
Read related link on:
https://brainly.com/question/24196643
if it took 2 hours to clean 4 houses how many houses could be cleaned in 3 hours
Answer:
6 houses
Explanation:
because
2hrs=4 houses which means you are cleaning 2houses in one hour
so in 3 hours you will houses because you will clean 2 houses in one hour
I hope this helped you sorry if I am wrong
zero is an integer?
Yes, 0 IS an integer.
brainliest pls
Answer:
Yes.....................Which symbol represents a DC power source in an electrical circuit?
A.
Image 1:
B.
Image 2:
C.
Image 3:
D.
Image 4:
Answer:
C. image 3
Explanation:
Answer:
Image 3
Explanation:
Correct on plato
Describe three functions of an operating system
Answer:
1. Booting. Booting is a process of starting the computer operating system starts the computer to work. It checks the computer and makes it ready to ...
2. Memory Management.
3. Loading and Execution.
Hope dis helpz!
Miguel, 22, has been diagnosed with a hypersensitivity to sunlight. Which of the following construction industry jobs might suit Miguel best?
O cement mason
O glazier
O roofer
O drywall installer
Answer:
O drywall installer
Explanation:
Most time spent inside.
Why might an insulation worker be necessary in the demolition phase of a reconstruction project?
They can eliminate the need for new insulation
They can verify that the old insulation was inadequate.
They can serve as general laborers for the project.
They can remove possibly toxic materials safely
Answer:
i think its the last one im not 100 tho
Visual aids are useful for all of the following reasons except
Answer:
B
Explanation:
their presence allows the speaker to take a rest from talking
I couldnt see the question
2. There are three drawings that architects and designers use to indicate spaces. What are these drawing?
Answer:
Architectural plans.
Explanation:
An architectural plan is called the drawings made by architects, civil engineers or designers of spaces or interiors, in which these professionals capture their building projects, organizing the distribution of the spaces to be used, the elements to be located in them and, fundamentally, to give construction planning a projection into reality. Thus, the plans help professionals to have a better understanding of the expected end result of the projects they are carrying out.
What is the function rule for the line? f(x)=−32x−2f(x)=−23x−2f(x)=32x−2f(x)=−32x+2A coordinate grid with x and y axis ranging from negative five to five. The line passes the points begin ordered pair negative 2 comma 1 end ordered pair and begin ordered pair 0 comma negative 2 end ordered pair.
Answer:
f(x)=23x−2
Explanation:
still trying to figure that out
Answer: The picture shows the correct one
Explanation: Hope this helps :) have a nice day.
List the parts of a manual transmission
List the parts of a typical clutch assembly?
Answer:
Explanation: Clutch Plate.
Clutch Cover.
Clutch Bearing (Release bearing)
Release Fork (clutch fork)
Would be much appreciated if someone could help with this will give brainiest.
Answer: both mm and inches on each dimension in a sketch (with the main dimension in one format and the other in brackets below it), in the way you can have dual dimensions shown when detailing an idw view.
personally think it would look a mess/cluttered with even more text all over the sketch environment, but everyone's differenent.
If it's any help - you know you can enter dimensions in either format? If you're working in mm you can still dimension a line and type "2in" and vice-versa. Probably know this already, but no harm saying it, just in case.
You can enter the units directly in or mm and Inventor will convert to current document settings (which you can change - maybe someone can come up with a simple toggle icon to toggle the document settings). Tools>Document Settings>Units
Unlike SolidWorks when you edit the dimension the original entry shows in the dialog box so it makes it easy to keep track of different units even if they aren't always displayed. (SWx does the conversion or equation and then that is what you get.)
I work quite a bit in inch and metric and combination (ex metric frame motor on inch machine) and it doesn't seem to be a real difficulty to me.
Which edge of a table saw goes along the fence? The jointed edge or rough edge?
Answer:
Jointed edge
Explanation:
Witch measuring tool would be used to determine the diameter of a crankshaft journal
What is the formula of color coding of resistance?
Answer:
R= [(numbers) × (multiplier) ± (tolerance (%) )]
Explanation:
Task 1
Water is retained in a 1 m wide rectangular section channel by a sluice gate that can
pivot about its base, as shown below. Determine the total force on the gate due to the
water, the position where it is considered to act and the tension in the horizontal
retaining cable attached to the top of the gate when the depth of water in the channel
is 1.5 m. The density of water is 1000 kg/m3.
Cable tension = T
2 m
1.5 m
Pivot
Answer:
I dont understand your question.
Explanation:
Which of the following is NOT an application for robotics
The options which are not an application for robotics are:
C. Outside exercise.
D. Kitchen appliances.
What is robotics?Robotics can be defined as a subfield of computer technology and engineering that typically deals with the design, development construction, operation, and application (use) of advanced computer systems known as robots, especially for the performance of certain tasks.
This ultimately implies that, outside exercise and kitchen appliances are not an application for robotics.
Read more on robotics here: https://brainly.com/question/10387419
#SPJ2
Maria wants to transfer energy from one part of an AC circuit to another. Which device she should use?
A.
diode
B.
transformer
C.
capacitor
D.
inductor
Answer:
c
Explanation:
it will work better
Answer:
B
Explanation:
i took the test
Will give brainly
Flowcharts are really useful tools that can help you organize your programming ideas in a logical sequence. Maybe you’ve encountered them in other areas of your life without even realizing it! Think about your favorite book of all-time. Chances are that the author put a lot of time and care into planning it out. If you were hired to write a sequel to this book, what are some of the steps that you would take to write something equally as awesome? Describe them in the order in which you would do them, and be specific!
If I were to write a book I would write my steps down as in figuring out what I what to talk about. A lot of steps need to be taken when writing a book, first you need to know what your gonna write about, you need an outline for your story. You don’t need to have it all worked out, but it’s helpful to have a reasonable idea of the shape and direction of your book before you the actual writing begins. When writing a story I would recommend doing research, you’ll likely want to spend time in libraries absorbing everything you can about your subject. At some point after deciding upon what you will be writing and doing research you will need to write a rough draft. After your first draft you should go through and edit, fix anything that is in need of fixing and if you encounter writers block find yourself some inspiration. After your first draft you'll need a second drafter for you to apply your revisions and edits, the second draft is also a chance to address more granular questions about your writing. After you have completed all the steps you have finished!
This is everything I know about writing from ELA class.
Explanation:
If I were to create a book, I would list the steps I took to decide what to write about. When writing a book, there are many procedures that must be taken.
What is Flowcharts?First, you must decide what you are going to write about and create a plot plan. Although you don't have to have everything planned out, it helps to have a general sense of the structure and direction of your book before you start writing.
I would advise completing research before starting to write a narrative. You'll probably want to spend some time in libraries learning everything you can about your topic.
After selecting your topic and conducting research, A diagram that depicts a workflow or process is called a flowchart. Another definition of a flowchart is a diagrammatic description of an algorithm or a step-by-step process for solving a problem.
Therefore, If I were to create a book, I would list the steps I took to decide what to write about. When writing a book, there are many procedures that must be taken.
To learn more about Flowchart, refer to the link:
https://brainly.com/question/29317974
#SPJ3