Two cars leave from Houston to go to different destinations. Car 1 travels at 62 mph for 30 minutes. How far did car 1 travel?

Answer:

pH = 3.3

Explanation:

Buffer solutions minimize changes in pH when quantities of acid or base are added into the mix. The typical buffer composition is a weak electrolyte (wk acid or weak base) plus the salt of the weak electrolyte. On addition of acid or base to the buffer solution, the solution chemistry functions to remove the acid or base by reacting with the components of the buffer to shift the equilibrium of the weak electrolyte left or right to remove the excess hydronium ions or hydroxide ions is a way that results in very little change in pH of the system. One should note that buffer solutions do not prevent changes in pH but minimize changes in pH. If enough acid or base is added the buffer chemistry can be destroyed.

In this problem, the weak electrolyte is HNO₂(aq) and the salt is KNO₂(aq). In equation, the buffer solution is 0.55M HNO₂ ⇄ H⁺ + 0.75M KNO₂⁻ . The potassium ion is a spectator ion and does not enter into determination of the pH of the solution. The object is to determine the hydronium ion concentration (H⁺) and apply to the expression pH = -log[H⁺].

Solution using the I.C.E. table:

              HNO₂ ⇄    H⁺   +   KNO₂⁻

C(i)        0.55M       0M      0.75M

ΔC            -x            +x          +x

C(eq)  0.55M - x       x     0.75M + x    b/c [HNO₂] / Ka > 100, the x can be                                    

                                                             dropped giving ...

           ≅0.55M        x       ≅0.75M        

Ka = [H⁺][NO₂⁻]/[HNO₂] => [H⁺] = Ka · [HNO₂]/[NO₂⁻]

=> [H⁺] = 6.80x010⁻⁴(0.55) / (0.75) = 4.99 x 10⁻⁴M

pH = -log[H⁺] = -log(4.99 x 10⁻⁴) -(-3.3) = 3.3

Solution using the Henderson-Hasselbalch Equation:

pH = pKa + log[Base]/[Acid] = -log(Ka) + log[Base]/[Acid]

= -log(6.8 x 10⁻⁴) + log[(0.75M)/(0.55M)]

= -(-3.17) + 0.14 = 3.17 + 0.14 = 3.31 ≅ 3.3

Answer:

0.296 M

Explanation:

What is the molar concentration of a solution prepared by dissolving 3.05 grams of sodium acetate in enough water to prepare 3.43 x 102 mL of the solution

sodium acetate NaCH3COO has molar mas of

23 + 12 +24 + 1 +32 = 92 g/mol

3.05 g is 3.05 g/ 92 g/mol = 0.0328 moles

it is distributed over 102 mL = 0.102 L

its concentration is 0.0328/ 0.102 =0.296 M Mhttps://brainly.com/question/25586315?answering=true&answeringSource=feedPublic%2FhomePage%2F3#

Answer:

mark me brainlest

Explanation:

Electronegativity values generally increase from left to right across the periodic table. Electronegativities generally decrease from top to bottom of a group. The highest electronegativity value is for fluorine.

Answer:

       "Electronegativity increases as you move from left to right across a period because the number of charges on the nucleus increases." (sstudy30 on Quizlet)

Explanation:

    It explains itself haha!

Have a nice day!

    I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)

- Heather

Answer:

The saline water should be from 1000 ppm to 3000 ppm while fresh water is less than 1000 ppm

Answer:

I think the answer is increases

Answer:

need points rn sorry bro hope u get ur answer

Explanation:

Answer:

Amino acids are molecules that combine to form proteins.

Explanation:

Amino acids are molecules that combine to form proteins. Amino acids and proteins are the building blocks of life. When proteins are digested or broken down, amino acids are left. The human body uses amino acids to make proteins to help the body: ... Repair body tissue.

Hope this helps :)

Answer:

i think the answer is C

Explanation:

not sure plsss dont bash im a beginner

Answer:

B ) The atom has 4 electrons, just like every atom of boron

Explanation:

Sorting the chemical elements in order from least reactive to most reactive, we have:

1. Fluorine (F).

2. Arsenic (As).

3. Antimony (Sb).

4. Silicon (S).

Given the following chemical elements:

Reactivity can be defined as a chemical property which determines how readily a chemical element bonds with other chemical elements, in order to form a new chemical compound.

Generally, the ability of a chemical element to bond with other chemical elements is largely (highly) dependent on the number of valence electrons it has in the outermost shell of its atomic nucleus.

As a general rule, chemical elements that are having fewer number of valence electrons are the most reactive while those having higher valence electrons are least reactive.

Also, chemical reactivity decreases down a group on the periodic table.

Based on the periodic table, the valency for the given chemical elements are:

In conclusion, sorting the chemical elements in order from least reactive to most reactive, we have:

1. Fluorine (F).

2. Arsenic (As).

3. Antimony (Sb).

4. Silicon (S).

Find more information: https://brainly.com/question/18214726

Answer:

The total pressure of a mixture of gases can be defined as the sum of the pressures of each individual gas: Ptotal=P1+P2+… +Pn. + P n . The partial pressure of an individual gas is equal to the total pressure multiplied by the mole fraction of that gas.

Using diving terms, partial pressure is calculated as: partial pressure = (total absolute pressure) × (volume fraction of gas component) For the component gas "i": pi = P × F.

Answer:

see explanation

Explanation:

Break down the following equations into two half equations(One for oxidation, one or reduction )

1. Cu + 2Ag+ ➡️Cu2+ +2Ag

2. Cl2 +2I- ➡️I2 + 2Cl​-

in reaction "1", the copper is being oxidized from 0 to +2 by losing 2 electrons

Cu---->Cu2+   + 2e-in reaction "2

in reaction "1" the silver is being reduced by gaining those 2 e-.

2Ag1+  + 2e----------->2Ag

In reaction "2", the iodine is being oxidized by losing 2 e-

2I- -------------> I2 + 2e

In reaction "2" the chlorine is being reduced by gaining those 2 e

Cl2 + 2e------------> 2Cl-

To solve such this we must know the concept of redox reaction. Therefore, the half reaction for the given reactions can be written as

1. Cu + 2Ag⁺ [tex]\rightarrow[/tex]Cu²⁺ +2A

Cu [tex]\rightarrow[/tex]Cu²⁺   + 2e⁻

2Ag⁺ + 2e⁻[tex]\rightarrow[/tex]2Ag

2.Cl[tex]_2[/tex]+2I⁻ [tex]\rightarrow[/tex]I[tex]_2[/tex] + 2Cl​⁻

2I⁻[tex]\rightarrow[/tex] I[tex]_2[/tex] + 2e⁻

Cl[tex]_2[/tex] + 2e⁻-----------> 2Cl⁻

Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.

Redox reaction is a chemical reaction where oxidation and reduction takes place simultaneously. Oxidation is loss of electrons and reduction is gain of electrons. The electron transfer from oxidant to reductant.

1. Cu + 2Ag⁺ [tex]\rightarrow[/tex]Cu²⁺ +2A

Cu [tex]\rightarrow[/tex]Cu²⁺   + 2e⁻

2Ag⁺ + 2e⁻[tex]\rightarrow[/tex]2Ag

2.Cl[tex]_2[/tex]+2I⁻ [tex]\rightarrow[/tex]I[tex]_2[/tex] + 2Cl​⁻

2I⁻[tex]\rightarrow[/tex] I[tex]_2[/tex] + 2e⁻

Cl[tex]_2[/tex] + 2e⁻-----------> 2Cl⁻

Therefore, the half reaction for the given reactions can be written as above.

Learn more about the chemical reactions, here:

https://brainly.com/question/3461108

#SPJ2

Answer:

a measure of hotness or coldness expressed in terms of a scale like Fahrenheit or Celcius

Answer:

Sodium has 11 electrons. The first two fill the innermost energy level. The second energy level is also full, holding eight electrons and one electron remaining in the outer energy level. It is the number of outer electrons that give an element its chemical properties.

Explanation:

Sodium has 11 electrons. Therefore electronic configuration of sodium is (2,8,1).

Electrons are the negatively charged particles of an atom. An atom contains a positive proton, a negative electron, and a neutral neutron. Electrons are negatively charged particles that rotate around the atom.

There are around 118 elements in the earth. Sodium is a important element. The atomic number of sodium is 11. The first shell contains 2 electrons, 2nd shell contains 8 electrons and 3rd shell will have 1 electron in sodium.

Sodium is a metal. It will loose that one electron and become cation. It become Na+.

Therefore, Sodium has 11 electrons. Therefore electronic configuration of sodium is (2,8,1).

To learn more about sodium, refer to the link:

https://brainly.com/question/24010534

#SPJ2

Answer:

Please mark me as brainliest and also give me 5 start Thank you

Explanation:

The radioactive element neptunium (atomic number 93) has the electron configuration

1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 5s2 4d10 5p64f14 5d10 6s2 6p6 7s2 6d1 5f4

The noble gas form is

[Rn] 7s2 6d1 5f4

Answer:

Radiation and conduction

Explanation:

The human body lose heat by these two ways, because everything that touches our bodies and is in a temperature below us will receive part of our heat (conduction), and you can figure out that we lose heat by radiation because a human bright in a heat cam

Hydrogen bonding occurs between water and molecules that are polar in nature.

Even though the question is incomplete, I will try to help you to the best of my ability. Hydrogen bonding is formed when hydrogen is bonded to a highly electronegative atom.

Hydrogen bonding could occur between the molecules of a compound or between the molecules of a substance and water. Hydrogen bonding occurs between the molecules of a substances such as NH3, H2O and HF.

On the other hand, hydrogen bonding occurs between water and the compound in compounds such as CH2F2, amines, etc.

Learn more: https://brainly.com/question/4542860

Answer:

19.8 %

Explanation:

Analysis of a 1.7500-g sample of

Pepto-Bismol yields 346 mg of bismuth. What percent by

mass is bismuth subsalicylate in the sample? (Assume that

there are no other bismuth-containing compounds in

Pepto-Bismol.)

346 mg = 0.346 gm

0.346 gm/1.75 gm =0.198 = 19.8 %

Answer:   A transfer of electrons occurs when fluorine and calcium react to form an ionic compound. This is because calcium is in group two and so forms ions with a two positive charge. ... A pairs of shared electrons makes one covalent bond. The compound formed is known as a molecule***

Explanation:

Because baseballs are made out of things that make it heavier then tennis balls, easier to play the sport. that's why they use a bat in baseball.

Answer:

a formula giving the proportions of the elements present in a compound but not the actual numbers or arrangement of atoms.

Explanation:

Answer:

Explanation:

Answer:

In chemistry: a pure substance consists only of one element or one compound. a mixture consists of two or more different substances, not chemically joined together.

Hope this helps :)

Answer:

43.7mol

Explanation:

[tex]?mol = 7.86kg * \frac{1000g}{1kg} *\frac{1mol}{180g}[/tex]

Above is dimensional analysis method. Write what you are trying to find with the question mark and write your given info on the other side of the equal sign. Follow the units and pay attention to them cancelling out. You should have your answer unit by the end.

the 180g came from the table with masses times the chemical formula all added together. Below is exact formula.

hydrogen mass(hydrogen amount) + carbon mass(carbon amount) + oxygen mass(oxygen amount)

1g(8)+12g(9)+16g(4)=180g

180g is 1 mole of [tex]C_{9} H_{8} O_{4}[/tex]

This problem is referring to an anhydrous salt that is derive from a hydrated Epson salt (magnesium sulfate hydrate) and the atom economy is required. However, not enough information is provided, yet we can use the attached file as a reference to provide a methodology of calculation.

To begin with, we need to calculate the [tex]x[/tex] which refers to the degree of hydration of the salt, so that we use the mass before and after heating the sample to figure out the grams and subsequently moles of water that are in there:

[tex]m_w=3.648g-1.782g=1.866g\\\\n_w=0.103molH_2O[/tex]

Next, since 1.782g corresponds to the anhydrous salt, we calculate the moles in such a amount:

[tex]1.782gMgSO_4*\frac{1molMgSO_4}{120.4gMgSO_4}=0.0148mol[/tex]

Then, we divide the moles of water by those of the anhydrous salt to calculte [tex]x[/tex]:

[tex]x=\frac{0.103mol}{0.0148mol} =6.96=7[/tex]

This means the formula of the hydrate is:

[tex]MgSO_4\ 7H_2O[/tex]

Finally, for the atom economy we just divide the molar mass of the anhydrous salt by that of the hydrate:

[tex]A.E=\frac{120.4g/mol}{246.47g/mol} *100\%\\\\A.E=48.8\%[/tex]

Learn more:

Answer:

A

Explanation:

now I'm not sure, but considering negative feedback allows the systems to self stabilize that would be the best option.

PLEASE NOTE THAT THIS IS A EDUCATED GUESS.

Boiling point, surface tension and vapour pressure is the list that includes only bulk properties of matter.

Bulk matter refers to those materials that contains large numbers of atoms, molecules, or ions. Its can be present into all states of matter that may be solid, liquid or gas.

Boiling is a bulk process and occurs throughout the liquid as well as surface tension and vapour pressure is also bulk properties of matter so we can conclude that boiling point, surface tension and vapour pressure is the list that includes only bulk properties of matter.

Learn more: https://brainly.com/question/25699778

Answer:

34 Aluminum Atoms needed to make Aluminum Chloride

Explanation: