The gravitational force of attraction between them is 3.56 * 10⁻⁴ N
What is Gravitational attraction?F = G*M1M2/d²,
where G = 6.67 * 10⁻¹¹ Nm²Kg⁻²,
M1 = 8000Kg and M2 = 1500 Kg,
F = 6.67 * 10⁻¹¹ * 8000 * 1500 / (1.5)² F = 3.56 * 10⁻⁴ N
The gravitational force of attraction between them is 3.56 * 10⁻⁴ N.
The universal gravitational law of Newton. According to this law, every body in the universe is attracted to every other body with a force that is inversely proportional to the square of the distance between them and proportional to the product of their masses.
Therefore, The gravitational force of attraction between them is 3.56 * 10⁻⁴ N.
To learn more about Gravitational force, refer to the link:
https://brainly.com/question/12528243
#SPJ1
Patrick and Emily are walking to the grocery store to buy some treats. They walk 3.0
km in 900.0 s. What was their average speed in m/s?
Answer:
3.33 m/s
Explanation:
(3.0 km)(1000 m/km) = 3000 m
Avg. Speed = distance/time = 3000 m/900 s = 3.33 m/s
A container is filled to a depth of 24.0 cm with water. On top of the water floats a 34.0 cm thick layer of oil with specific gravity 0.900. What is the absolute pressure at the bottom of the container
The Absolute pressure at the bottom of the container filled with water which has a thick layer of oil on the top will be 2735.21 Pa.
Information given as:
Height (h) = 31 cm = 0.31 m
Acceleration due to gravity (g) = [tex]9.8 m/s^{2}[/tex]
Specific gravity of oil = 0.900
So density of oil (ρ)= [tex]0.9X1000 = 900 kg/m^{3}[/tex]
We know that absolute pressure is given by the formula, here
So absolute pressure will be equal to [tex]P_{o} = 1.01 X 10^{5} Pa[/tex]
So absolute pressure of the oil will be 2735.21 Pa
Learn more about acceleration due to gravity:
brainly.com/question/13860566
#SPJ4
We are warmed by condensation because water molecules in the air that strike our bodies
A. form an insulating layer on our bodies
B. gain kinetic energy as they change state
C. transfer some of their kinetic energy to us
Condensation warms us because airborne water molecules that impact our bodies give up some of their kinetic energy to us.
What is kinetic energy?
Kinetic energy is the energy of motion. It is the energy that a moving item possesses.It is typically measured in joules and is equal to the work done to accelerate the object from its rest state to its current state. Kinetic energy can be found by multiplying the mass of an object by its velocity squared, divided by two. The kinetic energy of an object increases as its velocity increases.Kinetic energy exists in both linear and rotational forms. Linear kinetic energy is the energy of an object moving in a straight line, while rotational kinetic energy is the energy an object has due to its spinning or rotating motion.
To learn more about kinetic energy
https://brainly.com/question/8101588
#SPJ4
Normal
Question
Question 22
A projectile is launched into space where there is very little friction. According to Newton's law of inertia, the projectile willmost likely continue to travel in a straight line and?
The projectile will probably keep moving in a straight line and at a constant speed as long as no unbalanced forces are acting on it, according to Newton's law of inertia.
What is law of inertia?The law of inertia, also known as Newton's first law, states that an object at rest will remain at rest, and an object in motion will continue in motion with a constant velocity, unless acted upon by a net external force. In simple words, an object will remain in the same state of motion unless acted upon by an external force. This law explains why it is difficult to start an object moving and easy to keep it moving once it is in motion. This law applies to all objects and is a fundamental principle of physics. It also helps to understand the concept of force, motion and energy in physics.To learn more about law of inertia refer:
brainly.com/question/1830739
#SPJ4
What is called solar energy?
Answer:
energy from the sun
Explanation:
the sun radiates energy known as solar energy.
Under certain circumstances, the grounded (neutral) conductors of a residential service ____ permitted to be sized smaller than the phase conductors.
Under certain circumstances, the grounded (neutral) conductors of a residential service are permitted to be sized smaller than the phase conductors.
What is conductors?
A material that easily permits the flow of electricity is referred to as an electrical conductor. Conductivity is the quality of conductors that enables them to conduct electricity.
Electric current is the name given to the movement of electrons through a conductor. Voltage is the amount of power necessary to cause that current to flow through the conductor.
What is phase ?
Phases are parts of a system that are mechanically separable from other parts of the system and are physically distinct from other parts of the system. types of substance. Solid, liquid, or gaseous phases can exist in a system. Strong atomic bonding and high viscosity, which produce a hard form in solids, are their distinguishing characteristics.
Therefore, Under certain circumstances, the grounded (neutral) conductors of a residential service are permitted to be sized smaller than the phase conductors.
Learn more about conductors from the given link.
https://brainly.com/question/492289
#SPJ4
A man is pushing a baby stroller. Compared to the magnitude of the force exerted on the stroller by the man, the magnitude of the force exerted on the man by the stroller is A larger. B zero. C smaller, but greater than zero. D the same
A man is pushing a baby stroller. Compared to the magnitude of the force exerted on the stroller by the man, the magnitude of the force exerted on the man by the stroller is the same.
From Newton's third law of motion, the force exerted on the stroller by the man is same as the force exerted on the man by the stroller but is in the opposite direction.
Thus, the magnitude of the force exerted on the stroller by the man and the magnitude of the force exerted on the man by the stroller is same but in opposite direction.
To know more about force:
https://brainly.com/question/19657173
#SPJ4
Look at the diagram below. Calculate the present resistance of the variable resistor if the ammeter is reading 0.8A.
According to the given statement The variable resistor has a resistance value of 275Ω.
A variable resistor's resistance is, what?A variable resistor's third terminal allows the user to adjust the resistance between zero and a predetermined maximum value. You can notice consistent resistance exists between the terminals 1 and 3 of the variable resistor when the circuit diagram in Figure 4 is closely studied.
Variable resistance: How does it work?Changing the path that current must take allows a variable resistor to function. A conducting metal or ceramic strip that is connected to one area of the circuit is located inside the resistor. Another wire will be moved inside the resistor as you turn the dial.
To know more about variable resistor visit:-
brainly.com/question/15146292
#SPJ1
The complete question is -
Calculate the present resistance of the variable resistor if the ammeter is reading 0.8A. What is resistance value ?
What is a way Accenture plans to achieve its sustainability goals by achieving net zero emissions through advanced robotics capabilities?
Accenture is leveraging its advanced robotics capabilities to reduce emissions and achieve its sustainability goals.
What do you mean by Emissions?
Emissions are substances that are released into the environment, usually as a result of human activities. These substances can be in the form of gases, particles, or radiation, and they can be either natural or man-made. Common emissions include carbon dioxide, methane, and other greenhouse gases, as well as air pollutants such as volatile organic compounds (VOCs) and particulate matter.
Accenture is developing autonomous robots to reduce the carbon footprint of its operations, as well as to enable more efficient and low-emission operations. These robots are designed to be energy-efficient and require minimal human intervention. They can detect and diagnose potential issues in the system, such as air quality, temperature, and humidity, and can be used to automatically reduce energy consumption. Additionally, Accenture is also exploring the use of robotics to enable more energy-efficient production processes, such as 3D printing and additive manufacturing.
To know more about emissions,
https://brainly.com/question/30088186
#SPJ4
Which of the following types of microscopes reveals the surface features of small molecules? - a confocal microscope - a fluorescent microscope - a transmission electron microscope (TEM) - an atomic force microscope
The types of microscopes that reveals the surface features of small molecules is an atomic force microscope.
The Atomic Force Microscope (AFM) is useful for imaging the surface topography of living, soft materials in their natural settings. It can be used to examine the inherent elastic modulus and receptor-ligand interactions of cells and extracellular matrix, among other mechanical properties. SEM pictures can investigate surface features that are several tenths of a nanometer in size, but AFM resolution is less than 0.1 nm. As a result, AFM can discern objects on flat surfaces with molecular dimensions.
To learn more about Atomic Force Microscope (AFM), click here:
https://brainly.com/question/17781933
#SPJ4
How do you calculate lever arm in torque?
We can find the torque of lever arm by the formula Torque(T)=Force * perpendicular distance.
A torque is an action that causes objects to rotate. A torque is required to rotate an object, just as a force is required to move an object in a line. Torque is created by force, but it also depends on where the force is applied and the point about which the object rotates.
Force and lever arm are not always perpendicular. When the force and lever arm are not perpendicular, trigonometry is required to calculate the length of the lever arm. The force applied is perpendicular to the surface of the object rotating. When this force is at an angle θ with the plane of the object, the perpendicular force requires the use of the sine function.
When an object is in rotational equilibrium, the net torque applied to it is zero. For example, if an object such as a see-saw is not rotating, you know the torque on each side is balanced Rotational equilibrium is often used to determine unknown forces. Any object that is not moving is in rotational equilibrium and in translational equilibrium.
To know more about torque here
https://brainly.com/question/2456794
#SPJ4
a log with a mass of 14 kg is suspended by two ropes, one at either end. What is the tension force in each rope
According to the given statement The tension force in each rope is T = 14g/2Sin N, according to the information provided.
What is tension force ?Tension is the force that is transmitted through a cable, rope, or wires when it is stretched by loads exerted from opposing sides. The bodies are put through an identical degree of strain at each end of the wire by the tension force, which is exerted all along entire of the wire's length.
Let the tension in each rope be T₁ & T₂
Also, T₁ = T₂ = T
T₁ Sinθ + T₂ Sinθ = mg
2T Sinθ = mg
2T Sinθ = 14g
T = 14g/2Sinθ
To Learn more about Tension force from the given link.
brainly.com/question/2008782
#SPJ4
An object with mass of 50kg moves with
velocity of 11. 2m/s and an event occur
whereby it transfers 1539 of energy to
another objects as work.
What is the new
velocity of the object after the event??
The new velocity of the object after the event is 7.99m/s.
We are given that,
Mass = m = 50kg
Initial velocity = v = 11.2m/s
Energy = E = 1539j
The kinetic energy of object can be calculated as,
K= (1/2)mv²
K = (50×125.44)/2
K = 3136J
Consequently, since both the initial kinetic energy and the total amount of energy transferred are known. The article's resulting energy is easily discernible.
Final energy = initial kinetic energy - the ending energy
Final energy = 3136-1539= 1597 joules
Therefore, using the equation for kinetic energy derivation, the speed of the object can now be determined.
K.E = 1/2MV²
1597 = 50/2V²
3194 = 50V²
V = 7.99m/s
Therefore , the new velocity of the object after the event would be 7.99m/s.
To know more about velocity
https://brainly.com/question/24926862
#SPJ4
in order to catch a ball, a baseball player moves his or her hand backward in the direction of the balls motion. doing this reduces the force of impact on the players hand principally because....
a.) the time of impact is decreased
b.) the time of impact is increased
c.)the velocity of the hand is reduced
d.) the momentum of impact is reduced
e.) none of the above
The right response is B: To catch a ball, a baseball player moves his or her hand backward in the direction of the ball's motion because the time of impact is increased.
By doing this, the force of impact on the player's hand is mostly reduced. The force needed to stop the ball will decrease as the amount of time it takes to reach zero motion increases. Consider a ball approaching you with 100 units of momentum. To stop the ball, a 100-unit impulse would be necessary. No matter how the impulse is generated, there must be 100 units of it. A force is an effect that can alter an object's motion in physics.
Learn more about force here
https://brainly.com/question/13191643
#SPJ4
A wheel rotates at 2 rad/s. What is its period and frequency?
(1) The frequency of the oscillation is 0.32 Hz.
(2) The period of the oscillation is 3.13 seconds.
What is the period of the wheel's oscillation?
The period of the wheel's oscillation is the time taken for the wheel to make one complete oscillation.
The period of an oscillatory motion is the reciprocal of the frequency of the oscillation.
The frequency of the oscillation is the number of cycles completed by the oscillatory object in a given second.
The frequency of the wheel undergoing oscillatory motion is calculated by using the following formula.
f = ω / 2π
where;
ω is the angular speed of the wheelf is the frequencyf = ( 2 rad/s ) / 2π
f = 0.32 Hz
The period of the oscillation is calculated as follows;
T = 1 / f
T = 1 / 0.32 s
T = 3.13 seconds
Thus, the period of oscillation and frequency of the oscillation are inversely proportional.
Learn more about period of oscillation here: https://brainly.com/question/20070798
#SPJ1
A 64 g plastic ball is moving to the left at 24 m/s . How much work must be done on the ball to cause it to move to the right at 24 m/s
The ball requires a total of zero work to go to the right at 24 m/s.
Take into account the ball's kinetic energy.
Vi = -24 ms-1 for the initial velocity
Final velocity: vf = +24ms⁻¹
K = 12mvf²- 12mvi² = 12m(vf² - vi²) = 12m(242 - 242) = 0,
meaning that the ball does not undergo any effort.
As an alternative, think about the effort made to stop the ball.
W1 = ½m(0 – 24²) = 0.5 × 0.06 × –576 = –17.28J
Work required to accelerate the ball from rest to +24 milliseconds per second was W2 = 12m(242 - 0) = 0.5 0.06 576 = +17.28 J.
Therefore, the sum of the work is W = W1 + W2 = -17.28 + 17.28 = 0 J.
Learn more about kinetic energy here :
brainly.com/question/26472013
#SPJ4
What are the similarities and differences between static stretching and ballistic stretching?
Explanation:
This intense stretching method uses bouncing movements to push your body beyond its normal range of motion. Whereas static stretches are performed slowly and gradually, the ballistic method stretches muscles much farther and faster. You can do many of the same stretches as ballistic or static stretches.
2. Yvonne van Gennip of the Netherlands ice skated 10.0 km with an aver- age speed of 10.8 m/s. Suppose van Gennip erosses the finish line at her average speed and takes a huge bouquet of flowers handed to her by a fan. As a result, her speed drops to 10.01 m/s. If van Gennip's mass is 63.0 kg, what is the mass of the bouquet
The mass of the bouquet can be calculated using the equation m = F/a. Which is equal to 0.9kg.
Since van Gennip’s speed dropped from 10.8 m/s to 10.01 m/s after she took the bouquet, this indicates that a force was applied to her causing her to slow down.
The applied force can be determined by taking the difference between her final and initial momentum, which is p = mv.
Thus, the applied force can be calculated by F = Δp/Δt.
Plugging in the given values, the mass of the bouquet can be calculated as
m = F/a = (63.0 kg × (10.8 m/s - 10.01 m/s))/10.01 m/s² = 0.9 kg.
Therefore, the mass of the bouquet is 0.9 kg.
Learn more about mass:
https://brainly.com/question/28021242
#SPJ4
Pls I need answer please find the attached file is scanned image in PDF format I am not sure if you have any questions or concerns please visit the plug-in settings to determine how attachments are u still ther I need/not needed
Answer:
A. 35 °C
Explanation:
You want to know which of the temperatures 5, 10, 15, or 35 °C is most favorable to mosquito breeding.
BreedingMosquitos are nonfunctional below 50 °F (10 °C), and are lethargic at 60 °F (15.6 °C). They prefer 29 °C, and their breeding falls off at higher and lower temperatures.
Of the temperature choices offered, mosquitos would breed fastest at 35 °C.
In which situation is the maximum possible work done? A. when the angle between the force and displacement is 0° B. when the angle between the force and displacement is 180° C. when the angle between the force and displacement is 45° D. when the angle between the force and displacement is 90°
As a result, the force's effort is at its greatest when there is no angle between its direction and displacement, hence option A is correct.
What is work done?According to physics, a force is an effect that has the power to change an object's motion.
A force can cause a massed item to accelerate or modify its velocity. A push or a pull is a straightforward method to explain forces. Since a force has both magnitude and direction, it is a vector quantity.
Therefore, work is therefore at its greatest when the angle between force and displacement is 0 °.
Learn more about work done, here:
https://brainly.com/question/11870590
#SPJ1
Answer: A. when the angle between the force and displacement is 0 degrees.
Explanation:
Edmentum
A 1 kilogram object is thrown horizontally and a 2 kilogram object is dropped vertically at the same instant and from the same point above the ground. If friction is neglected, at any given instant both objects will have the same
a) Total velocity
b) Momentum
c) Height
d) Kinetic energy
If friction is neglected, at any given instant both objects will have the same c) Height.
What is friction?
Friction is the resistance to motion that results from two objects rubbing against one another. Two objects rubbing against one another causes friction. Motion is opposed by friction, which works against the motion.
When an object slides over another object, friction slows it down. As a result, energy is used. However, the energy does not fade away. Kinetic energy, also referred to as moving energy, is transformed into heat energy. We rub our hands together when it's cold because of this. Rub them together, and friction and heat will result.
Learn more about friction
https://brainly.com/question/13000653
#SPJ4
Order the electromagnetic waves from lowest frequency (1) to highest (4). gamma: infrared: x-ray: visible light:
Gamma: 4
Infrared: 1
X-Ray: 3
Visible Light: 2
Infrared has the longest wavelength between the four options, meaning that it has the lowest frequency. Since the longer the frequency, the lower the frequency. While the shorter the wavelength, the higher the frequency.
The portions of the electromagnetic spectrum are called from greatest to lowest energy: gamma rays, X-rays, ultraviolet radiation, visible light, infrared radiation, and radio waves. Microwaves (such as those used in microwave ovens) are a subset of the electromagnetic spectrum's radio wave segment.
Next would be visible light since it has the second longest wavelength out of the given options. Then it would be X-Ray. And finally Gamma since it has the shortest wavelength.
Learn more about to electromagnetic
https://brainly.com/question/17057080
#SPJ4
Two pendulums have the same dimensions (length L) and total mass 1m2. Pendulum A is a very small ball swinging at the end of a uniform massless bar. In pendulum B, half the mass is in the ball and half is in the uniform bar. Find the period of each pendulum for small oscillations. Which one takes longer for a swing
For pendulum A, the period of oscillation is T = 2π × √(L/g). For pendulum B, the period of oscillation is T = 2π × √(2L/g). As we can see from the formula, Pendulum B takes longer for a swing as its period of oscillation is longer than pendulum A due to the fact that half the mass is distributed along the uniform bar.
The period of a pendulum is given by the formula T = 2π × √(L/g) where L is the length of the pendulum and g is the acceleration due to gravity.
For pendulum A, the total mass is concentrated in the small ball at the end of the massless bar, so the period of oscillation is T = 2π × √(L/g)
For pendulum B, half the mass is in the small ball, and half is distributed along the uniform bar, so the period of oscillation will be T = 2π × √(2L/g)
In both cases, the length of the pendulum is the same, so the period of oscillation for pendulum A is shorter than the period of oscillation for pendulum B. Therefore pendulum B takes longer to swing.
It's worth noting that these calculations are based on small oscillations, when the angle of oscillation is small, as the period of a pendulum is dependent on the angle of oscillation.
To learn more about oscillation at
https://brainly.com/question/30111348?referrer=searchResults
#SPJ4
Within galaxies there are billions of stars. Analyze the Hertzsprung Russell Diagram below and then choose the statements which are true, based on the diagram.
The Hertzsprung-Russell (H-R) Diagram is a graph that plots the luminosity (or absolute brightness) of stars against their surface temperature (or spectral type). It is used to classify stars based on their properties and understand their evolution.
The following statements are true based on the H-R diagram:
Most stars are located on the main sequence, which runs from the upper left to the lower right of the diagram. This represents stars that are burning hydrogen in their cores and are in a state of equilibrium.Stars located in the upper right corner of the diagram are brighter and hotter than those on the main sequence and are known as "giants" or "supergiants". They have exhausted the hydrogen in their cores and are in a later stage of their evolution.Stars located in the lower left corner of the diagram are cooler and less bright than those on the main sequence and are known as "dwarfs". These stars are in the early stages of their evolution and are still burning hydrogen in their cores.Stars located on the horizontal branch are burning helium in their cores, this represents stars that are in a different stage of their evolution.There is a clear relationship between a star's luminosity and its temperature, with hotter stars being brighter than cooler stars.The diagram shows that there is a wide range of luminosities and temperatures among stars, with some being much brighter and hotter than others.It's important to mention that the H-R diagram is a representation of the stars that are observed, and it's also based on the assumption that all stars are similar in their formation and evolution process.
The answer is general since no option is provided and similar question is nowhere to be found.
Learn more about H-R diagram here: brainly.com/question/19852541
#SPJ4
Which of the following conditions should be met to make a process perfectly reversible?
Check all that apply.
(1) Any mechanical interactions taking place in the process should be frictionless.
(2) Any thermal interactions taking place in the process should occur across infinitesimal temperature or pressure gradients.
(3) The system should not be close to equilibrium.
1) Any mechanical interactions taking place in the process should be frictionless, to make a process perfectly reversible
What is mechanical interactions?
Mechanical interactions are physical forces that are used to affect the behavior of objects and materials. This can include contact forces such as friction, tension, and compression, as well as non-contact forces such as gravity, magnetism, and electric fields
Mechanical interactions can be used to cause objects to move, change shape, or experience a change in energy. These interactions can also be used to create, store, or transfer energy. Mechanical interactions are studied by engineers and scientists in multiple disciplines, and are used in many different applications, including the design of machinery, medical devices, and consumer products.
To learn about more mechanical interactions
https://brainly.com/question/13249269
#SPJ4
Each of five satellites makes a circular orbit about an object that is much more massive than any of the satellites. The mass and orbital radius of each satellite are given below. Which satellite has the greatest speed? Mass Radius (A) ½m R (B) m ½R (C) m R (D) m
Correct option is B, satellite that has the greatest speed has Mass Radius m ½R.
Because the satellite orbits the earth, the gravitational pull of the planet on the satellite supplies the necessary centrifugal force. In a circular orbit, the gravitational force is constant, hence the satellite's velocity is also constant.
Kepler's third law informs us that
V² = GM/R
Therefore, v = (GM/R)
Where;
V is the speed
G stands for gravity constant.
Mass is M.
R is radius
Let's begin by examining the first choice, which is Option B.
Here, mass equals m and radius equals (1/2)R.
Consequently, v = (Gm/(R/2)) = (2Gm/R)
After carefully examining each choice, it is evident that option B will have the highest velocity because its numerator is the largest, which will result in a higher velocity.
To learn more about satellite from given link
https://brainly.com/question/15394495
#SPJ4
A standing wave is set up in a pipe with both ends open. The frequency of its first harmonic is 300 Hz. What is the length of the pipe? Take the speed of sound to be 340 m s–1. Give your answer in meters
When the frequency of a standing wave set up in a pipe (with both ends open) first harmonic is 300 Hz, the length of pipe is 0.567 metres.
Therefore the answer is 0.567 m.
The speed of sound in air is approximately 340 m/s, and the wavelength of the first harmonic of a standing wave in an open pipe is twice the length of the pipe. Therefore, if the frequency of the first harmonic is 300 Hz, the wavelength can be calculated as:
wavelength = speed of sound / frequency
wavelength = (340 m/s) / (300 Hz)
The length of the pipe can be calculated as half the wavelength:
L = wavelength/2
L = (340 m/s) / (2×300 Hz)
L ≈ 0.567 m
So the length of the pipe is 0.68 m
To know more on standing wave
https://brainly.com/question/15128964
#SPJ4
Two particles P and Q are initially at rest 1.64 m apart, P has a mass of 1.43 kg and Q a mass of 4.29 kg. P and Q attract each other with a constant force of 1.79 x 10-2 N. No external forces act on the system. (a) Describe the motion of the center of mass. (b) At what distance from P’s original position do the particles collide?
(a)The center of mass of the system has no acceleration, and remains at the same position as it was earlier.
(b)The particle P, collide at a distance 1.23m from P's original position.
What is acceleration?Vector quantities include accelerations. The direction of the net force imposed on an object determines its acceleration in relation to that force.Acceleration in a body is the result of imbalanced forces.The three main categories of accelerated motions are uniform, non-uniform, and average acceleration. When an item moves in a straight path with an increase in speed occurring at regular intervals of time, this motion is referred to as having uniform acceleration.Any modification of motion's speed or direction is referred to as acceleration. When anything is speeding up, slowing down, or not traveling straight ahead, it is said to be accelerating.To learn more about acceleration refer to:
https://brainly.com/question/460763
#SPJ4
can u pls solve this question thank u!! i having my physics paper tomorrow!!
Answer:
13.875Ω & 5Ω
Explanation:
in the first diagram:-
R = Rs + Rp + Rs'
Rp => [tex]\frac{1}{7} + \frac{1}{1} = \frac{1+7}{7} = \frac{8}{7} \\[/tex]
Rp = [tex]\frac{7}{8}[/tex] = 0.875
4 + 0.875 + 9 = 13.875Ω
in the second diagram:-
R= Rp + Rs + Rp'
Rp => 1/6 + 1/3 = 1+2/6 = 3/6 => 2
Rp' => 1/3+1/3+1/3 = 3/3 => 1
R = 2 + 2 + 1 = 5 Ω
How do you calculate the speed of an object rolling down a ramp?
We can calculate the speed of an object rolling motion a ramp by using the equation of motion in which we consider rolling and a tangential force acting on it.
Rolling motion occurs when an object rolls down over a height from the ramp or from any other sloppy or rough surface. the surface can be both smooth or rough, depending on it the friction acts on the object that is rolling over the ramp. we also consider the rolling tangential force in our calculation along with other forces when we tend to calculate the rest of the things. We can calculate the speed of an object rolling motion a ramp by using the equation of motion in which we consider rolling and a tangential force acting on it. Hence by this we can consider that we can calculate the rolling of any object by the equation of motion.
Learn more about Rolling motion:
brainly.com/question/29568301
#SPJ4