Two students each write a function, C(n) , that they think can be used to find the number of circles needed to make the nth figure in the pattern shown. Use the drop-down menus to explain why each function does or does not represent the number of circles needed to make the nth figure in the pattern.

a) The MLE for p is p = n / (x1+x2+...+xn).

b) The Cramer-Rao lower bound applies.

c) The estimator in part (a) is unbiased.

(a) The probability mass function of the geometric distribution is given by:

P(X=k) = (1-p)^(k-1) * p

The likelihood function for a random sample of size n from the geometric distribution is given by:

L(p) = P(X=x1) * P(X=x2) * ... * P(X=xn)

= (1-p)^(x1-1) * p * (1-p)^(x2-1) * p * ... * (1-p)^(xn-1) * p

= (1-p)^(x1+x2+...+xn-n) * p^n

Taking the natural logarithm of the likelihood function, we get:

ln(L(p)) = (x1+x2+...+xn-n) * ln(1-p) + n * ln(p)

Differentiating with respect to p and setting the derivative equal to zero to find the maximum, we get:

d/dp ln(L(p)) = - (x1+x2+...+xn-n)/(1-p) + n/p = 0

Solving for p, we get:

p = n / (x1+x2+...+xn)

Therefore, the MLE for p is p = n / (x1+x2+...+xn).

(b) The regularity conditions necessary for the Cramer-Rao lower bound to apply are:

The random variable X is independent and identically distributed (i.i.d.).

The probability density function or probability mass function of X depends on a parameter θ that is to be estimated.

The function g(θ) = d/dθ ln(f(X;θ)) is continuous and has finite variance for all θ in an open interval containing θ0.

The integral of |g(θ)|^2f(X;θ) dx over the range of X and the open interval containing θ0 is finite.

For the geometric distribution, these conditions are satisfied:

The random variable X is i.i.d. because each trial is independent and has the same probability of success.

The probability mass function of X depends on the parameter p, which is to be estimated.

g(p) = d/dp ln(f(X;p)) = (1-p)/(p ln(1-p)) is continuous and has finite variance for all p in (0,1).

The integral of |g(p)|^2 f(X;p) dx over the range of X and the interval (0,1) is finite.

Therefore, the Cramer-Rao lower bound applies.

(c) To determine if the estimator in part (a) is asymptotically normal and/or consistent, we need to use the properties of MLEs:

MLEs are asymptotically unbiased, meaning that as the sample size n approaches infinity, the expected value of the estimator approaches the true value of the parameter being estimated.

MLEs are asymptotically efficient, meaning that as the sample size n approaches infinity, the variance of the estimator approaches the Cramer-Rao lower bound.

For the geometric distribution, the expected value of the estimator is:

E(p) = E(n/(x1+x2+...+xn))

= n / E(x1+x2+...+xn)

= n / (n/p)

= p

Therefore, the estimator in part (a) is unbiased.

The variance of the estimator is:

Var(p) = Var(n/(x1+x2+...+xn))

= n^2 Var(1/(x1+x2+...+xn))

= n^2 Var(1/X)

where X = x1

To learn more about probability visit: https://brainly.com/question/30034780

#SPJ11

The value of x after the following statements execute will be 4.

In the given code, there are two statements. First, an integer variable x is declared without being initialized, which means it will have an unspecified value. Then, x is assigned a value based on the result of a conditional (ternary) operator.

The conditional operator has the following syntax: (condition) ? value_if_true : value_if_false. It evaluates the condition, and if the condition is true, it returns value_if_true, otherwise it returns value_if_false.

In this case, the condition being evaluated is (5 <= 3 & 'a' < 'f'). Let's break it down:

5 <= 3 is a comparison between 5 and 3 using the less than or equal to operator. This evaluates to false, because 5 is not less than or equal to 3.

'a' < 'f' is a comparison between the ASCII values of 'a' and 'f'. In ASCII, the value of 'a' is less than the value of 'f'. So this comparison evaluates to true.

& is the bitwise AND operator, which performs a bitwise AND operation on the individual bits of the operands. In this case, it performs a bitwise AND operation on the result of the two previous comparisons. However, since the result of the first comparison is false (0), the bitwise AND operation will also result in false (0).

So, the overall result of the condition (5 <= 3 & 'a' < 'f') is false (0), because the first comparison is false. As a result, the value_if_false branch of the conditional operator is executed, which is 4. Therefore, the value of x will be assigned as 4 after the statements execute.

To learn more about integer, refer below:

https://brainly.com/question/15276410

#SPJ11

The equation in slope-intercept form of the line that passes through (8,-8) and (4,7) is y = -2x + 9

The line that is parallel to this line is 4x - 5y = -2 (option A).

The rate at which Mario rides his bike is 6 feet per second. The correct answer is A.

The equation in slope-intercept form of the line that passes through (-4,-19) and (3,-14) is:

y = (1/7)x - (117/7)

The equation in slope-intercept form of the line that passes through (5.5, 9) and (5,2) is:

y = 14x - 63

The equation in slope-intercept form of the line that passes through (2.14, 5) and (5, 9) is:

y = (8/3)x - (2/3)

The equation in slope-intercept form of the line that passes through (8,-8) and (4,7) is:

y = -2x + 9

So the correct answer is y = -2x + 9.

To find an equation that is parallel to 8x - 10y = -2, we need to find the slope of this line.

We can rearrange the equation into slope-intercept form (y = mx + b) by solving for y:

8x - 10y = -2

-10y = -8x - 2

y = (4/5)x + (1/5)

So the slope of this line is 4/5. Any line that is parallel to this line will also have a slope of 4/5.

We can now use the point-slope form of the equation of a line to find the equation of the line that is parallel to 8x - 10y = -2 and passes through (1,-2):

y - (-2) = (4/5)(x - 1)

y = (4/5)x + 6/5

Multiplying both sides by 5, we get:

4x - 5y = -2

So the correct answer is 4x - 5y = -2 (option A).

Mario rides past one block every 50 seconds, and each block is 300 feet long. This means that he rides 300 feet every 50 seconds, or:

300 feet/50 seconds = 6 feet/second

Learn more about equations of lines at: https://brainly.com/question/18831322

#SPJ1

The probability of at most 4 out of the next 5 patients surviving is 0.40941.

We are not given the value of p, so we cannot calculate the expected value and variance.

This question seems to be a combination of two unrelated problems. Here are the solutions to both problems:

Probability of at most 4 out of the next 5 patients surviving:

Let X be the number of patients out of 5 who survive the operation. X is according to a binomial distribution with n=5 and p=0.9. The probability mass function of X is:

[tex]P(X=k) = (5 choose k) * 0.9^k * 0.1^{5-k} for k = 0, 1, 2, 3, 4, 5[/tex]

To find the probability of at most 4 patients surviving, we can sum the probabilities for k=0 to 4:

P(X<=4) = P(X=0) + P(X=1) + P(X=2) + P(X=3[tex]P(X=k) = (5 choose k) * 0.9^k * 0.1^{5-k} {for} k = 0, 1, 2, 3, 4, 5) + P(X=4)[/tex][tex]) + P(X=4)[/tex]

[tex]= (5 choose 0) * 0.9^0 * 0.1^5 + (5 choose 1) * 0.9^1 * 0.1^4 + (5 choose 2) * 0.9^2 * 0.1^3 + (5 choose 3) * 0.9^3 * 0.1^2 + (5 choose 4) * 0.9^4 * 0.1^1[/tex]

= 0.00001 + 0.00045 + 0.0081 + 0.0729 + 0.32805

= 0.40941

Therefore, the probability of at most 4 out of the next 5 patients surviving is 0.40941.

Expected value and variance of the number of trucks that have blowouts out of the next 15 trucks tested:

Let X be the number of trucks out of 15 that have blowouts. X follows a binomial distribution with n=15 and some probability of success p. We are not given the value of p, so we cannot calculate the expected value and variance.

Learn more about expected value.

brainly.com/question/29574962

#SPJ11

a. The bottom-up minimal-change algorithm generates all permutations by iteratively generating the next permutation with minimal change from the previous one.

b. The Johnson-Trotter algorithm generates all permutations by iteratively swapping adjacent elements that have different directions until no more swaps are possible.

c. The lexicographic-order algorithm generates all permutations by iterating through the permutations in lexicographic order.

The bottom-up minimal-change algorithm generates all permutations by iteratively generating the next permutation with minimal change from the previous one. Starting with the initial permutation, it finds the rightmost element that is smaller than the element to its right.

It then finds the smallest element to the right of this element that is greater than it, swaps them, and reverses the sequence to the right of the original element. This process is repeated until all permutations have been generated.

b. The Johnson-Trotter algorithm generates all permutations by iteratively swapping adjacent elements that have different directions until no more swaps are possible. The direction of an element is determined by its relative size to its adjacent elements.

The algorithm starts with the initial permutation and repeatedly finds the largest mobile element (an element that is smaller than its adjacent element in its direction) and swaps it with its adjacent element in the opposite direction. This process is repeated until all permutations have been generated.

c. The lexicographic-order algorithm generates all permutations by iterating through the permutations in lexicographic order. It starts with the initial permutation and repeatedly finds the largest index i such that a[i] < a[i+1].

If no such index exists, the permutation is the last one. Otherwise, it finds the largest index j such that a[i] < a[j], swaps a[i] and a[j], and reverses the sequence from a[i+1] to the end. This process is repeated until all permutations have been generated.

Learn more about Johnson-Trotter algorithm here

brainly.com/question/30009994

#SPJ4

The given question is incomplete, the complete question is:

Explain a. the bottom-up minimal-change algorithm. b. the Johnson-Trotter algorithm. c. the lexicographic-order algorithm.

The value of the car 20 years after it was purchased is $5,300.

What is purchase price?

Purchase price refers to the amount of money that a buyer pays to purchase a product, service, or asset from a seller. It is the price that is agreed upon between the buyer and the seller at the time of the transaction. The purchase price may be influenced by various factors, such as the demand and supply of the product, the quality of the product, the competition in the market, and the negotiation skills of the buyer and seller. In short, the purchase price is the cost of acquiring the item being purchased.

Here,the car depreciates by one half every 3.5 years.

After 3.5 years the car will be worth half of its original value, or $14,500. Again after 3.5 years, it will be worth half of 14,500, or 7,250. This process can be continued until the 20-year mark.

20 years is equal to 20/3.5 = 5.71 periods of 3.5 years. Since the car's value is halved every period, its value after 5.71 periods will be [tex]29000 \times ( \frac{ 1}{2})^{5.71}[/tex] = $5,258.22

Rounding to the nearest hundred dollars, the value of the car 20 years after it was purchased is $5,300.

Learn more about purchase price here,

https://brainly.com/question/30096961

#SPJ1

The first figure has a 629.86 square metre area.

The sum of a rectangle's length and breadth gives the area of the rectangle.

Length times width equals the rectangle's area.

To determine the area of the first figure, we must first calculate the combined areas of the rectangle and the semicircles.

This gives us the figure's overall area.

The rectangle measures 28 metres in length. We can observe that the rectangle's length is divided in half by the semicircle's diameter.

Thus, D = 14 m and radius = 7 m.

Area of the 2 semicircles is equal to

 = 7x7x7 = 49 square metres

The rectangle's width is equal to 24 minus r.

= 24 - 7 = 17m

Length times width equals the rectangle's area.

28 times 17 is 476 square metres.

The total size is 629.86 square metres.

To know more about area visit:

brainly.com/question/27683633

#SPJ1

The rate at which water is draining is 72 liters per second.

The slope of a graph is a measure of how steep the graph is, or how much the dependent variable changes in relation to the independent variable.

The rate at which water is draining is equal to the slope of the graph;

Mathematically, the slope is defined as the ratio of the change in the vertical or y-axis value (the dependent variable) to the change in the horizontal or x-axis value (the independent variable) between two points on the graph. It represents the rate of change or the steepness of the graph.

The slope is usually denoted by the letter "m" and is calculated using the following formula:

Slope (m) = (change in y-axis value)/(change in x-axis value)

rate = slope = (0 L - 360 L )/( 5 s - 0 s )

rate = -360 L / 5 s

rate = -72 L/s

Learn more about slope here: https://brainly.com/question/3493733

#SPJ1

The given sequence [tex]an=(5n+1)^2/(4n−1)^2[/tex] converges to the limit 25/16.

To determine whether the sequence [tex]an=(5n+1)^2/(4n−1)^2[/tex] converges, we can use the limit comparison test. This involves comparing the given sequence to a known convergent or divergent sequence.

Let [tex]bn=1/n^2[/tex]. This is a known convergent sequence, as it is a p-series with p=2. Using algebraic manipulation, we can rewrite an as follows:

[tex]an=(5n+1)^2/(4n−1)^2= (25n^2 + 10n + 1)/(16n^2 - 8n + 1)= (25 + 10/n + 1/n^2)/(16 - 8/n + 1/n^2)= (25/n^2 + 10/n + 1)/(16/n^2 - 8/n + 1/n^2)[/tex]

Now, taking the limit as n approaches infinity of the ratio of an to bn gives:

lim(n→∞) [tex]an/bn[/tex]
= lim(n→∞) [tex][(25/n^2 + 10/n + 1)/(16/n^2 - 8/n + 1/n^2)] / (1/n^2)[/tex]
= lim(n→∞) [tex](25 + 10n + n^2)/(16 - 8n + n^2)[/tex]
= 25/16

Since this limit is finite and nonzero, and bn converges, then an also converges by the limit comparison test. Thus, the sequence converges to the same limit as the limit of the ratio of an to bn, which is 25/16.

In summary, the given sequence [tex]an=(5n+1)^2/(4n−1)^2[/tex] converges to the limit 25/16.

To know more about limit comparison test refer here:

https://brainly.com/question/31362838

#SPJ11

The surface area of the right prism with dimensions 3m, 8m, 9.1m is 126.60 m².

A prism is a three-dimensional shape that has two parallel congruent bases that are both polygons, and lateral faces that connect these bases. The shape of the lateral faces can vary, but they are typically parallelograms. Examples of prisms include rectangular prisms (such as a box), triangular prisms, and hexagonal prisms.

To find the surface area of a right prism, we need to find the area of each face and add them up.

In this case, we have a rectangular base with dimensions of 3 m and 8 m, so the area of the base is:

Area of base = length x width = 3 m x 8 m = 24 m²

The height of the prism is 9.1 m, so the area of the two rectangular faces is:

2 x (length x height) = 2 x (3 m x 9.1 m) = 54.6 m²

The area of the top and bottom faces, which are also rectangles, are the same as the base, so we add that twice:

2 x 24 m² = 48 m²

Now we can add up all the areas to find the surface area:

Surface area = area of base + area of two rectangular faces + area of top and bottom faces

Surface area = 24 m² + 54.6 m² + 48 m²

Surface area = 126.6 m²

Rounding to the nearest hundredth, the surface area is about 126.60 square meters.

To know more about prism visit:

brainly.com/question/29722724

#SPJ1

1. Determine what mathematics are being used. This looks like a trigonometry question, so we'll be using sin, cos, or tan.
2. Are we finding an angle or a side? We're finding an angle, which means we will be using the inverse of sin, cos, or tan.
3. Sin, cos, or tan? Sin means opposite/hypotenuse, cos means adjacent/hypotenuse, and tan means opposite/adjacent. If x° is our theta, then we will be using tan since the problem only supplies us with our opposite and adjacent side.
4. Write down the equation. x = tan⁻¹(opposite/adjacent)
5. Fill in the blanks. x = tan⁻¹(19/22)
6. Input into a calculator. x = 40.81508387

It might look daunting, but just follow the rules of trigonometry, and you'll finish these questions within seconds. This means your final answer is 40.82°.

The coordinates of the matrix m=[337−6] with respect to the standard basis of the space of 2x2 matrices, b={[1000],[0100],[0010],[0001]}, are [337, -6, 0, 0].

To find the coordinates of a matrix m=[a b; c d] with respect to the standard basis b, we need to express m as a linear combination of the basis vectors.

So we have to solve the equation

m = x[1000] + y[0100] + z[0010] + w[0001]

where [1000], [0100], [0010], and [0001] are the standard basis vectors.

Expanding the equation gives

[a b; c d] = x[1 0; 0 0] + y[0 1; 0 0] + z[0 0; 1 0] + w[0 0; 0 1]

Equating the corresponding entries of the matrices gives

a = x

b = y

c = z

d = w

Therefore, the coordinates of the matrix m=[337 -6] with respect to the standard basis are

x = 337

y = -6

z = 0

w = 0

So the coordinates of m are (337, -6, 0, 0) with respect to the standard basis.

To know more about matrix:

https://brainly.com/question/28180105

#SPJ4

B(71,w) = 0.013812w gives a 71-inch person's body mass index when w is their weight in pounds (w ≥ 0).

To find the cross-sectional model B(71,w), you need to substitute h = 71 inches in the given equation B(h,w) = 697.5wh^{-2}.

Step 1: Substitute h = 71 in the given equation:
B(71,w) = 697.5 * (71)^(-2) * w

Step 2: Calculate the coefficient by evaluating (71)^(-2) and multiplying by 697.5:
Coefficient = 697.5 * (1/(71^2)) ≈ 0.013812

Step 3: Write the cross-sectional model using the calculated coefficient (rounded to six decimal places):
B(71,w) = 0.013812 * w

B(71,w) = 0.013812w gives a 71-inch person's body mass index when w is their weight in pounds (w ≥ 0).

visit here to learn more about mass index:

brainly.com/question/10694067

#SPJ11

By  exponential growth , In light of this, it will take roughly 12 years for the population to reach 6300.

A process called exponential growth sees a rise in quantity over time. It happens when a quantity's derivative, or instantaneous rate of change with respect to time, is proportionate to the amount itself1. A quantity that is increasing exponentially is referred to as a function, and the exponent, which stands in for time, is the variable that represents time. (in contrast to other types of growth, such as quadratic growth)¹. If the proportionality constant is negative, exponential decline happens instead

We may utilise the exponential growth formula to resolve this issue:

A = P(1 + r)ⁿ

where: A = total sum

P = starting sum

Annual Growth Rate is r.

N equals how many years.

We are aware that P is the initial population and A is the end population, both of which are 5000. The yearly growth rate, r, is 3.5%, as well. Solving for n using these values as inputs results in:

6300 = 5000(1 + 0.035)ⁿ

If we simplify this equation, we get:

1.26 = 1.035ⁿ

When you take the natural logarithm of both sides, you get:

ln(1.26) =  ln(1.035)

To find n, solve for:

12 yearsⁿ = ln(1.26) / ln(1.035).

In light of this, it will take roughly 12 years for the population to reach 6300.

To know more about exponential growth visit:

brainly.com/question/11487261

#SPJ1

The value of c is 3.

To find the value of c if the given equation is ∞Σn=2 (1c)⁻ⁿ = 8, we need to first understand that this is a geometric series with a common ratio of (1/c) and starting from n=2. The sum of an infinite geometric series can be found using the formula S = a / (1 - r), where S is the sum, a is the first term, and r is the common ratio.

In this case, the first term (a) is (1/c)⁻², which simplifies to c², and the common ratio (r) is 1/c. We plug these values into the formula and get:

8 = c²/ (1 - (1/c))

Solving for c, we find that c = 3. Therefore, the value of c in the given equation is 3.

To know more about geometric series click on below link:

https://brainly.com/question/4617980#

#SPJ11

Answer:

All whole numbers are rational numbers.

Step-by-step explanation:

The perameter to find a cartesian equation of the curve is y^2 = 1 + x.

We are given that;

x=tan^2(theta)

y=sec(theta)

Now,

We need to solve for t in one equation and substitute it into the other equation. In this case, we have:

x = tan^2(t) y = sec(t)

Solving for t in the first equation, we get:

t = arctan(sqrt(x))

Substituting this into the second equation, we get:

y = sec(arctan(sqrt(x)))

Using the identity sec^2(t) = 1 + tan^2(t),

we can simplify this equation as:

y^2 = 1 + x

Therefore, by the given equation the answer will be y^2 = 1 + x

Learn more about equations here;

https://brainly.com/question/25180086

#SPJ1

Based on the mentioned values and the provided informations, the quotient of 5 ÷ 1/4 is calculated to be  20 [tex]\frac{2}{3}[/tex] . So, option D is correct.

To solve this problem, we need to divide 5 by 1/4. We can do this by multiplying 5 by the reciprocal of 1/4.

The reciprocal of 1/4 is 4/1, so we can rewrite the expression as 5 x 4/1, which simplifies to 20.

Therefore, the quotient of 5 ÷ 1/4 is 20 [tex]\frac{2}{3}[/tex]

To elaborate further, 1/4 represents one part of the large rectangle, which has been divided into five equal parts. When we divide 5 by 1/4, we are essentially asking how many times 1/4 goes into 5.

Multiplying 5 by the reciprocal of 1/4, which is 4/1, is the same as dividing 5 by 1/4. This gives us a quotient of 20, which can also be expressed as a mixed number, 20 ²/₃.

Learn more about rectangle :

https://brainly.com/question/20432857

#SPJ4

The complete question is :

large rectangle is divided into five equal parts. What is the quotient of 5 ÷ 1/4? The possible answers are A) 1/20, B) 5/4, C) 4/5, and D) 20 2/3.

( A )-  We use the inclusion-exclusion principle to find the total number of integers in the set that are divisible by at least one of 2, 3, 5, or 7. The result is 104.

( B-) There are 48 primes in the set of integers that are divisible by at least one of 2, 3, 5, or 7.

(C-) n must be greater than 120, which means that all composite numbers in the set 1, 2,..., 120 that were not counted in part (a) must be divisible by at least one of 2, 3, 5, or 7.

(a) The number of integers in the set 1, 2,..., 120 that are divisible by at least one of 2, 3, 5, and 7 can be found using the principle of inclusion-exclusion. We first find the number of integers that are divisible by each individual prime factor:

Number of integers divisible by 2: 60

Number of integers divisible by 3: 40

Number of integers divisible by 5: 24

Number of integers divisible by 7: 17

Next, we find the number of integers that are divisible by each pair of prime factors:

Number of integers divisible by 2 and 3: 20

Number of integers divisible by 2 and 5: 12

Number of integers divisible by 2 and 7: 8

Number of integers divisible by 3 and 5: 8

Number of integers divisible by 3 and 7: 5

Number of integers divisible by 5 and 7: 3

We continue in this way to find the number of integers that are divisible by three prime factors, four prime factors, and so on. Finally, we use the inclusion-exclusion principle to find the total number of integers in the set that are divisible by at least one of 2, 3, 5, or 7. The result is 104.

(b) To find the number of primes in the set of integers that are divisible by at least one of 2, 3, 5, or 7, we need to exclude all composite numbers. We can do this by subtracting the number of integers that are divisible by two or more of 2, 3, 5, and 7 from the total number of integers found in part (a):

Number of integers divisible by 2 and 3: 20

Number of integers divisible by 2 and 5: 12

Number of integers divisible by 2 and 7: 8

Number of integers divisible by 3 and 5: 8

Number of integers divisible by 3 and 7: 5

Number of integers divisible by 5 and 7: 3

Number of integers divisible by 2, 3, and 5: 4

Number of integers divisible by 2, 3, and 7: 2

Number of integers divisible by 2, 5, and 7: 2

Number of integers divisible by 3, 5, and 7: 1

Therefore, there are 48 primes in the set of integers that are divisible by at least one of 2, 3, 5, or 7.

(c) Of the integers in 1, 2,..., 120 that were not counted in part (a), the only one that is not prime is 1. To see why all of the others are primes, consider any composite number n that is not divisible by 2, 3, 5, or 7. By the fundamental theorem of arithmetic, n can be written as a product of primes, none of which are 2, 3, 5, or 7. But since n is composite, it must have at least one prime factor other than 2, 3, 5, or 7. Therefore, n must be greater than 120, which means that all composite numbers in the set 1, 2,..., 120 that were not counted in part (a) must be divisible by at least one of 2, 3, 5, or 7.

(d) Using the results from parts (b) and (c), we can find the total number

Learn more about “ fundamental theorem of arithmetic “ visit here;

https://brainly.com/question/15317294

#SPJ4

The code for Gaussnaive.m is given below:

(c) % I write the following math code for the above method in Matlab and running its came...I gave the file name as GaussNaive.m ..

Code from "Gauss elimination and Gauss Jordan methods using MATLAB"

a = [1 1 -1 -3

6 2 2 2

-3 4 1 1];

Here a=(AIb) augumented matrix

%Gauss elimination method [m,n)=size(a);

[m,n]=size(a);

for j=1:m-1

for z=2:m

if a(j,j)==0

t=a(j,:);a(j,:)=a(z,:);

a(z,:)=t;

end

end

for i=j+1:m

a(i,:)=a(i,:)-a(j,:)*(a(i,j)/a(j,j));

end

end

x=zeros(1,m);

for s=m:-1:1

c=0;

for k=2:m

c=c+a(s,k)*x(k);

end

x(s)=(a(s,n)-c)/a(s,s);

end

disp('Gauss elimination method:');

a

x' % solution in gauss jordan

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

% Gauss-Jordan method

[m,n]=size(a);

for j=1:m-1

for z=2:m

if a(j,j)==0

t=a(1,:);a(1,:)=a(z,:);

a(z,:)=t;

end

end

for i=j+1:m

a(i,:)=a(i,:)-a(j,:)*(a(i,j)/a(j,j));

end

end

for j=m:-1:2

for i=j-1:-1:1

a(i,:)=a(i,:)-a(j,:)*(a(i,j)/a(j,j));

end

end

for s=1:m

a(s,:)=a(s,:)/a(s,s);

x(s)=a(s,n);

end

disp('Gauss-Jordan method:');

a

x' % solution in Gauss elimination

The Gauss elimination is a popular numerical technique employed to solve linear equation systems. Its method includes applying row operations to an augmented matrix, bringing it to the row echelon form, and finally deriving the solution through back-substitution.

Read more about Gauss elimination here:

https://brainly.com/question/31298537

#SPJ1

The equation in standard form for the circle with diameter endpoints (1,17) and (1,-1) is (x - 1)^2 + (y - 8)^2 = 81.

To write the equation of a circle in standard form, we need to use the formula: (x - h)^2 + (y - k)^2 = r^2 Where (h,k) is the center of the circle and r is the radius.

We can use the midpoint formula to find the center of the circle, which is the midpoint of the diameter: Midpoint = ((x1 + x2)/2 , (y1 + y2)/2) Substituting the given endpoints, we get: Midpoint = ((1 + 1)/2 , (17 + (-1))/2) = (1, 8) So the center of the circle is (1,8).

Now we need to find the radius, which is half the length of the diameter: Length of diameter = sqrt((1-1)^2 + (17-(-1))^2) = sqrt(18^2) = 18 Radius = 18/2 = 9 Substituting the center and radius in the standard form equation, we get: (x - 1)^2 + (y - 8)^2 = 9^2 Simplifying, we get: (x - 1)^2 + (y - 8)^2 = 81

Visit here to learn more about Circle:

brainly.com/question/29788136

#SPJ11

Answer:

C

Step-by-step explanation:

the scale factor is the ratio of corresponding sides, image P to original N

scale factor = [tex]\frac{10}{4}[/tex] = [tex]\frac{5}{2}[/tex]

-Answer: The scale factor that takes polygon N to polygon P is 2.5.

As sample variance increases, the likelihood of rejecting the null hypothesis and the effect on measures of effect size such as r2 and Cohen's d can be described by the likelihood increases and measures of effect size increase. So, the correct option is A.

As sample variance increases, the data points are more spread out, making it more likely to detect a significant difference between groups, thus increasing the likelihood of rejecting the null hypothesis. Additionally, the larger variance may also lead to larger effect sizes, as r2 and Cohen's d both consider the magnitude of differences in the data. Hence Option A is the correct answer.

You can learn more about variance at: brainly.com/question/14116780

#SPJ11

(a) The statement "In a small county, there are 110 people on any given day who are eligible for jury duty. of the 110 eligible people, 90 are women This is an example of sampling without replacement " is true.

(b) The probability that all four potential jurors excused for medical reasons are women can be calculated using the hypergeometric probability distribution.

(a) True. Sampling without replacement means that once a person is selected for a sample, they cannot be selected again. In this case, once a person is selected for jury duty, they cannot be selected again for another jury duty, which is an example of sampling without replacement.

b) There are 90 women out of 110 eligible people, so the probability of selecting a woman for the first potential juror is 90/110.

Since the sample size is decreasing with each selection, the probability of selecting a woman for the second potential juror is 89/109, for the third potential juror is 88/108, and for the fourth potential juror is 87/107

Therefore, the probability that all four potential jurors excused for medical reasons are women is (90/110) x (89/109) x (88/108) x (87/107) = 0.4324 (rounded to four decimal places).

To know more about probability distribution click on below link:

https://brainly.com/question/14210034#

#SPJ11