using trigonometric identities in exercises 43, 44, 45, 46, 47, 48, 49, 50, 51, and 52, use trigonometric identities to transform the left side of the equation into the right side .

The probability of B from k is 0.655

The probability tree of the distribution is given as

A = 0.5k

B = 7k - 0.15

C  = 2.5k

By definition, we have

Sum of probabilities = 1

This means that

A + B  C = 1

substitute the known values in the above equation, so, we have the following representation

0.5k + 7k - 0.15 + 2.5k = 1

When evaluated, we have

10k - 0.15 = 1

So, we have

10k = 1.15

Divide

k = 0.115

Recall that

B = 7k - 0.15

So, we have

B = 7(0.115) - 0.15

Evaluate

B = 0.655

Hence, the probability of B is 0.655

Read more about probability at

https://brainly.com/question/24756209

#SPJ1

Next, you’re going to research the author. Write down notes that target specific facts about Cisneros in the box below. Your notes should be helpful in understanding her biases, experiences, and knowledge. List three well-developed ideas as opposed to three simple facts in the light blue area of the box (that will be four ideas including my sample for an “A” grade). Be sure you are not copying and pasting from a website and that your words are your own. Cite your sources by putting the author’s last name or the title of the website if there is not an author. I have an example as a model.

Sandra Cisneros was born 1954 in Chicago, USA making her 49 years old, thus she was writing about the 1960-90’s. She writes all different styles of pieces most of which are for pre-teens and teens, but she also writes for adults. She has won a lot of different writing awards throughout her life (Cisnero).

Step-by-step explanation:

The accurate answer is:

A. A=[0 0; -9 4], B=[0; 8], C=[1 0; 0 -3;], and D=[-9 0; 0 -3]

Explanation:

A matrix represents the coefficients of the state variables in the state-space equations. Based on the given state-variable models, we have x·1 = -9x1 + 4x2 and x·2 = -3x2 + 8u. Therefore, the matrix A would be [0 0; -9 4], representing the coefficients of x1 and x2 in the state equations.

B matrix represents the coefficients of the input variable (u) in the state-space equations. Based on the given state-variable models, we have x·1 = -9x1 + 4x2 and x·2 = -3x2 + 8u. Therefore, the matrix B would be [0; 8], representing the coefficient of u in the state equations.

C matrix represents the coefficients of the state variables in the output equation. Based on the given state-variable models, the outputs are x1 and x2. Therefore, the matrix C would be [1 0; 0 -3], representing the coefficients of x1 and x2 in the output equations.

D matrix represents the coefficients of the input variable (u) in the output equation. Based on the given state-variable models, the outputs are x1 and x2, and there is no direct dependence on the input u in the output equations. Therefore, the matrix D would be [0 0; 0 0], representing no direct dependence of u in the output equations.

Answer:

m=147°

Step-by-step explanation:

Sum of interior angles of an n-sided polygon = (n-2)×180°, where n is the number of sides.

Sum of interior angles = (5-2) × 180°

= 3 × 180°

= 540°

m = 540-132-84-101-76

= 147°

a) The position function is x = 0.05 *sin ( 10π*t + 3π/2 )

b) For t = 15 sec: V = 0 m/sec; a = 49.35 m/sec2 .

The position function as a function of time, velocity and acceleration are calculated by applying the simple harmonic motion formulas MAS , assuming that it is a point object and without friction, as follows:

a)  w = 2*π/T = 2*π/ 0.2 sec = 10π rad/sec

For t = 0 r = -A stretched spring:

    -A = A *sin ( 10π*0 + θo) -A/A = sinθo sinθo = -1

       θo= -3π/2

   x = 0.05 * sin ( 10π*t + 3π/2 ) position function

b)   V = 0.05*10π* cos ( 10π*t + 3π/2 ) m/sec

    a = -0.05* ( 10π )²*sin ( 10π*t + 3π/2 ) m/sec2

   For t = 15 sec

     V = 0.05 * 10π* cos ( 10π*15 + 3π/2 ) = 1.57*cos ( 150π+ 3π/2 )

      V = 1.57 m/sec * cos ( 3π/2 ) =

      V = 0m/sec  

     a = -0.05 *( 10π)²* sin ( 10π* 15 + 3π/2 )      

    a = -49.35 m/seg2* sin ( 3π/2 )= + 49.35 m/seg2          

Read more about speed here:

https://brainly.com/question/13943409

#SPJ1

The question in English is:

We stretch a spring with a radius of 5 cm and let it oscillate freely, resulting in it completing one oscillation every 0.2 seconds. Calculate:

a) its elongation at 4 seconds

b) its speed at 4 seconds

c) its speed at that time.

The unit vector with positive x-component that is orthogonal to both p(0) and p′(0) is [tex]v_u_n_i_t[/tex] = v / ||v|| = ⟨-1,0,0⟩.

First, we need to find the vector that represents the position of the curve at t=0, which is p(0) = ⟨-1,0,0⟩.

Then we need to find the vector that represents the velocity of the curve at t=0, which is p'(t) = ⟨2t,2,4t⟩, so p'(0) = ⟨0,2,0⟩.

To find a unit vector that is orthogonal to both p(0) and p'(0), we can use the cross product:

v = p(0) x p'(0)

where "x" denotes the cross product. This will give us a vector that is perpendicular to both p(0) and p'(0), but it may not be a unit vector. To make it a unit vector, we need to divide by its magnitude:

[tex]v_u_n_i_t[/tex] = v / ||v||

where "||v||" denotes the magnitude of v.

So let's calculate v:

v = p(0) x p'(0) = ⟨0,0,2⟩ x ⟨0,2,0⟩ = ⟨-4,0,0⟩

And the magnitude of v is:

||v|| = sqrt((-4)^2 + 0^2 + 0^2) = 4

So the unit vector that is orthogonal to both p(0) and p'(0) and has a positive x-component is:

[tex]v_u_n_i_t[/tex] = v / ||v|| = ⟨-1,0,0⟩

Know more about vector here:

https://brainly.com/question/25705666

#SPJ11

Answer: 4500

Step-by-step explanation:

Step-by-step explanation:

These are prime factorizations....pick out the highest common factors listed and then expand :

  they both have  3^4   and that is it   3^4 = 81  is the HCF

The probability that a randomly selected bill will be at least $39.10 is 0.0344.

To calculate the probability, we need to standardize the value $39.10 using the mean and standard deviation provided.

Let X be the random variable representing the daily dinner bill. Then, X ~ N(30, 5^2). We want to find P(X ≥ 39.10).

We can standardize X as follows:

Z = (X - μ) / σ

where μ = 30 and σ = 5.

Substituting the given values, we get:

Z = (39.10 - 30) / 5 = 1.82

Now, we need to find the probability that Z is greater than or equal to 1.82. We can use a standard normal distribution table or calculator to find this probability.

Using a standard normal distribution table, we find:

P(Z ≥ 1.82) = 0.0344

Therefore, the answer is D. The probability that a randomly selected bill will be at least $39.10 is 0.0344, or approximately 3.44%.

Learn more about probability

brainly.com/question/30034780

#SPJ11

The probability that a randomly selected bill will be at least $39.10 is 0.0344.

To calculate the probability, we need to standardize the value $39.10 using the mean and standard deviation provided.

Let X be the random variable representing the daily dinner bill. Then, X ~ N(30, 5^2). We want to find P(X ≥ 39.10).

We can standardize X as follows:

Z = (X - μ) / σ

where μ = 30 and σ = 5.

Substituting the given values, we get:

Z = (39.10 - 30) / 5 = 1.82

Now, we need to find the probability that Z is greater than or equal to 1.82. We can use a standard normal distribution table or calculator to find this probability.

Using a standard normal distribution table, we find:

P(Z ≥ 1.82) = 0.0344

Therefore, the answer is D. The probability that a randomly selected bill will be at least $39.10 is 0.0344, or approximately 3.44%.

Learn more about probability

brainly.com/question/30034780

#SPJ11

We need to multiply the numerator and denominator by 3-√5 to rationalize the denominator of the fraction. Therefore, the correct answer is option B

To rationalize the denominator of the fraction 6−2√3+√5, we need to eliminate any radicals present in the denominator. We can do this by multiplying both the numerator and denominator by an expression that will cancel out the radicals in the denominator.

In this case, we can observe that the denominator contains two terms with radicals: -2√3 and √5. To eliminate these radicals, we need to multiply both the numerator and denominator by an expression that contains the conjugate of the denominator.

The conjugate of the denominator is 6+2√3-√5, so we can multiply both the numerator and denominator by this expression, giving us:

(6−2√3+√5)(6+2√3-√5) / (6+2√3-√5)(6+2√3-√5)

Simplifying the numerator and denominator, we get:

(6 * 6) + (6 * 2√3) - (6 * √5) - (2√3 * 6) - (2√3 * 2√3) + (2√3 * √5) + (√5 * 6) - (√5 * 2√3) + (√5 * -√5) / ((6^2) - (2√3)^2 - (√5)^2)

This simplifies to:

24 + 3√3 - 7√5 / 20

Therefore, the correct answer is option B.

To learn more about numerator and denominator click on,

https://brainly.com/question/7067665

#SPJ1

Step-by-step explanation:

See image below:

(a) We obtained two solutions: y = 0 and [tex]y = [(a/c) - k^{(-b)}]^{(1/b)[/tex]. We showed that y = 0 is an equilibrium point and that lim A(y) = a as y approaches infinity. We also showed that A(k) = a/2.

(b) We found that y = 0 is a stable equilibrium point if abk < c, and an unstable equilibrium point if abk > c.

The differential equation model of the protein concentration dynamics is given by:

[tex]dy/dt = ay^b/(1+ky^b) - c^*y[/tex]

where y is the amount of protein in the cell, a is the maximal rate of protein production, k is the "half saturation" constant,

b corresponds to the number of protein molecules required to activate the gene, and c is the rate of protein degradation.

(a) To verify that lim A(y) = a and A(k) = a/2, we first find the steady state solution by setting the left-hand side of the differential equation to zero:

[tex]0 = ay^b/(1+ky^b) - c^*y[/tex]

Solving for y, we get:

y = 0 or [tex]y = [(a/c) - k^{(-b)}]^{(1/b)[/tex]

The first solution y = 0 represents an equilibrium point. To find the limit as y approaches infinity, we can use L'Hopital's rule:

lim y -> infinity A(y) = lim y -> infinity [tex]ay^b/(1+ky^b)[/tex] - cy

= lim y -> infinity [tex](abk\ y^{(b-1)})/(bk\ y^{(b-1)})[/tex] - c

= a - c

Therefore, lim A(y) = a.

To find A(k), we substitute k for y in the steady state solution:

[tex]A(k) = [(a/c) - k^{(-b)}]^{(1/b)}\\= [(a/c) - (1/k^b)]^{(1/b)}\\= [(a/c) - (1/(2^{(2b)}))^{(1/b)}\\= [(a/c) - (1/2^b)]^{(1/b)[/tex]

= a/2

Therefore, A(k) = a/2.

(b) To verify that y = 0 is an equilibrium for this model, we substitute y = 0 into the differential equation:

[tex]dy/dt = ay^b/(1+ky^b) - c^*y\\= a_0^b/(1+k_0^b) - c^*0[/tex]

= 0

This shows that y = 0 is an equilibrium point.

To determine under what conditions it is stable, we can take the derivative of the right-hand side of the differential equation with respect to y:

[tex]d/dy (ay^b/(1+ky^b) - c^*y)\\= (abk\ y^{(b-1)})/(1+ky^b)^2 - c[/tex]

At y = 0, this becomes:

[tex]d/dy (ay^b/(1+ky^b) - c^*y)|y=0\\= abk/(1+0)^2 - c\\= abk - c[/tex]

Therefore, y = 0 is a stable equilibrium point if abk < c. If abk > c, then y = 0 is an unstable equilibrium point.

Learn more about differential equation model of the protein concentration dynamics

brainly.com/question/30819836

#SPJ11

The equation of the plane in general form is: 2x - 16y - 16z + 16t + 416 = 0

How to find the equation of a plane?

To find the equation of a plane passing through a point and perpendicular to a vector, we can use the point-normal form of the equation of a plane:

Ax + By + Cz = D

where (A, B, C) is the normal vector to the plane, and (x, y, z) is any point on the plane.

In this case, the point given is (8t, 8 – t, 9 + 3t), and the vector perpendicular to the plane is (2, 0, 1).

First, we need to find the normal vector to the plane. We can do this by taking the cross product of the given vector and the vector formed by the line:

(2, 0, 1) x ((8, -1, 0) - (0, 8, 9)) = (2, -16, -16)

Now we can use the point-normal form with the given point and the normal vector we just found:

2x - 16y - 16z = D

To find the value of D, we can substitute in the coordinates of the given point:

2(8t) - 16(8 - t) - 16(9 + 3t) = D

16t - 128 + 16t - 288 - 48t = D

-16t - 416 = D

So the equation of the plane in general form is: 2x - 16y - 16z + 16t + 416 = 0

Learn more about equation of the plane

brainly.com/question/28456872

#SPJ11

A subspace of V containing all vectors that are parallel to the vector (1, 2) is { (k, 2k) | k ∈ R }. A subspace of V containing all vectors that are perpendicular to the vector (1, 1) is { (x, -x) | x ∈ R }.

(a) To construct a subspace of V containing all vectors parallel to the vector (1, 2), we need to find a scalar multiple of the given vector.

A vector is parallel to another vector if it is a scalar multiple of that vector.

Step 1: Let k be a scalar in R (real numbers).
Step 2: Multiply the given vector (1, 2) by k:

k(1, 2) = (k, 2k).
Step 3: The subspace of V containing all vectors parallel to (1, 2) is given by the set { (k, 2k) | k ∈ R }.

(b) To construct a subspace of V containing all vectors perpendicular to the vector (1, 1), we need to find vectors that have a dot product of 0 with the given vector.

Step 1: Let the vector we are looking for be (x, y).
Step 2: Calculate the dot product:

(1, 1) · (x, y) = 1*x + 1*y = x + y.
Step 3: To find the vectors perpendicular to (1, 1), set the dot product to 0:

x + y = 0.
Step 4: Rearrange the equation to isolate y:

y = -x.
Step 5: The subspace of V containing all vectors perpendicular to (1, 1) is given by the set { (x, -x) | x ∈ R }.

Learn more about subspace:

https://brainly.com/question/13045843

#SPJ11

A subspace of V containing all vectors that are parallel to the vector (1, 2) is { (k, 2k) | k ∈ R }. A subspace of V containing all vectors that are perpendicular to the vector (1, 1) is { (x, -x) | x ∈ R }.

(a) To construct a subspace of V containing all vectors parallel to the vector (1, 2), we need to find a scalar multiple of the given vector.

A vector is parallel to another vector if it is a scalar multiple of that vector.

Step 1: Let k be a scalar in R (real numbers).
Step 2: Multiply the given vector (1, 2) by k:

k(1, 2) = (k, 2k).
Step 3: The subspace of V containing all vectors parallel to (1, 2) is given by the set { (k, 2k) | k ∈ R }.

(b) To construct a subspace of V containing all vectors perpendicular to the vector (1, 1), we need to find vectors that have a dot product of 0 with the given vector.

Step 1: Let the vector we are looking for be (x, y).
Step 2: Calculate the dot product:

(1, 1) · (x, y) = 1*x + 1*y = x + y.
Step 3: To find the vectors perpendicular to (1, 1), set the dot product to 0:

x + y = 0.
Step 4: Rearrange the equation to isolate y:

y = -x.
Step 5: The subspace of V containing all vectors perpendicular to (1, 1) is given by the set { (x, -x) | x ∈ R }.

Learn more about subspace:

https://brainly.com/question/13045843

#SPJ11

To construct a 98% confidence interval, we need the t value with a degree of freedom 49 corresponding to an area of 2.02% upper tail.

In statistics, a confidence interval is a range of values that is likely to contain an unknown population parameter with a certain level of confidence. The level of confidence is represented by a percentage value, such as 90%, 95%, or 98%. To construct a confidence interval, we need to determine the appropriate critical value from the t-distribution table, based on the sample size and the desired level of confidence.

The critical value corresponds to the number of standard errors that need to be added or subtracted from the sample mean to obtain the confidence interval.

For a 98% confidence level with 49 degrees of freedom, the critical value is 2.68. The upper tail area corresponding to this value is 1% + 0.99% + 0.01% + 0.02% = 2.02% since the t-distribution is symmetric.

Therefore, to construct a 98% confidence interval, we need to multiply the standard error by 2.68 and add and subtract the resulting values from the sample mean.

To learn more about confidence interval, visit:

https://brainly.com/question/17034620

#SPJ11

To find the absolute minimum and maximum values of the function f(x) = x^4 - 72x^2 within the interval [-5, 13], we'll first identify critical points and then evaluate the function at the endpoints.

The absolute minimum value is equal to -93911 at x = 13, and the absolute maximum value is equal to 31104 at x = 6.

Step 1: Find the derivative of f(x) with respect to x:
f'(x) = 4x^3 - 144x

Step 2: Find the critical points by setting f'(x) equal to 0:
4x^3 - 144x = 0
x(4x^2 - 144) = 0
x(x^2 - 36) = 0

The critical points are x = -6, 0, and 6.

However, x = -6 is not in the given interval, so we'll only consider x = 0 and x = 6.

Step 3: Evaluate f(x) at the critical points and endpoints:
f(-5) = (-5)^4 - 72(-5)^2 = 3125 - 18000 = -14875
f(0) = 0^4 - 72(0)^2 = 0
f(6) = 6^4 - 72(6)^2 = 46656 - 15552 = 31104
f(13) = 13^4 - 72(13)^2 = 28561 - 122472 = -93911

Step 4: Determine the minimum and maximum values:
The absolute minimum value is equal to -93911 at x = 13, and the absolute maximum value is equal to 31104 at x = 6.

To know more about Absolute maximum values:

https://brainly.com/question/29449130

#SPJ11

Answer:

90 degrees counterclockwise

Step-by-step explanation:

The three factors that affect the size of the margin of error when constructing a confidence interval for the population proportion are Sample size, Confidence level, and Population proportion.

1. Sample size (n): Larger sample sizes generally result in smaller margins of error, as the estimates become more precise.

2. Confidence level: Higher confidence levels (e.g., 95% vs 90%) lead to wider confidence intervals and larger margins of error, as they cover a greater range of potential values for the population proportion.

3. Population proportion (p): The margin of error is affected by the population proportion itself. When the proportion is close to 0.5, the margin of error is largest, while it is smaller when the proportion is near 0 or 1.

These factors are important to consider when constructing confidence intervals to ensure accurate and reliable results.

Know more about Sample Size here: https://brainly.com/question/30885988

#SPJ11

answer. 804.25

the radius times two, times pie

Answer:

804.2496 square feet

Step-by-step explanation:

Just apply the formula for the area of a circle given the radius

A = π r²

where

A = area

r = radius

Given r = 16 ft

A = π x 16²

A= π x 256

Taking π as 3.1416 we get

A = 3.1416 x 256

A = 804.2496 square feet

Answer: q=1

Step-by-step explanation: Because it connects

Answer:300

Step-by-step explanation:

Mutipliy 20x15 and you'll get your answer

The score that he needs to acquire next time so that his average is 78 would be = 89.

The average of a set of values(scores) can be calculated by finding the total s of the values and dividing it by the number of the values.

That is ;

average = sum of the scores/number of scores

average = 78

sum of scores = 77+79+67+x

number of scores = 4

Therefore,X is solved as follows;

78 = 77+79+67+x/4

78×4 = 77+79+67+x

312 = 223+X

X = 312-223

= 89

Learn more about mean here:

https://brainly.com/question/26941429

#SPJ1

According to the question the there will be 3 stacks, with each stack containing 120 books.

Height is the measure of vertical distance or length. It is most commonly measured in units of meters, centimeters, or feet and inches. Height is an important factor in many sports and everyday activities, such as determining the size of a person's clothing or the size of a person's house.

The number of stacks will be determined by the number of books in the set with the most books. In this case, that would be 336 books in the English set. Each stack must have the same number of books, so the total number of stacks will be 336 divided by the number of books in the other sets: 240 in mathematics and 96 in science. Therefore, there will be 3 stacks, with each stack containing 120 books.

To learn more about height
https://brainly.com/question/28440955
#SPJ1

The particular solution to the differential equation is: y = 8t + [tex]16t^2/2[/tex] - 37.453125

To find a particular solution to this differential equation, we need to first integrate the left-hand side of the equation. Integrating 8' gives us 8, and integrating 16 gives us 16t (since we are integrating with respect to t). So the left-hand side of the equation becomes:
8 + 16t
Now we can set this equal to the right-hand side of the equation, which is -8.5 - 4:
8 + 16t = -8.5 - 4
Simplifying this equation, we get:
16t = -20.5
Dividing both sides by 16, we get:
t = -1.28125
So a particular solution to the differential equation is:
y = 8t + [tex]16t^2/2[/tex] + C
where C is a constant of integration. We can use the value of t we found above to solve for C:
-8.5 - 4 = 8(-1.28125) + [tex]16(-1.28125)^2/2[/tex] + C
Simplifying this equation, we get:
C = -37.453125
So the particular solution to the differential equation is:
y = 8t + [tex]16t^2/2[/tex]- 37.453125
This is the solution that satisfies the differential equation and the initial condition y(-1) = -8.5 - 4.

To learn more about the differential equation, refer:-

https://brainly.com/question/14620493

#SPJ11

There exists a function f such that f(x) > 0, f 0 (x) < 0, and f 00(x) > 0 for all x. - True.

There exists a function f(x) that satisfies these conditions. To see why, consider the function f(x) = x^3 - 3x + 1.
First, note that f(0) = 1, so f(x) is greater than 0 for some values of x.
Next, f'(x) = 3x^2 - 3, which is negative for x < -1 and positive for x > 1. Therefore, f(x) has a local minimum at x = 1 and a local maximum at x = -1. In particular, f'(0) = -3, so f'(x) is negative for some values of x.
Finally, f''(x) = 6x, which is positive for all x except x = 0. Therefore, f(x) has a concave up shape for all x, including x = 0, and in particular f''(x) is positive for all x.
So we have found a function f(x) that satisfies all three conditions.
a function f with the properties f(x) > 0, f'(x) < 0, and f''(x) > 0 for all x. This statement is true.
An example of such a function is f(x) = e^(-x), where e is the base of the natural logarithm. This function satisfies the conditions as follows:
1. f(x) > 0: The exponential function e^(-x) is always positive for all x.
2. f'(x) < 0: The derivative of e^(-x) is -e^(-x), which is always negative for all x.
3. f''(x) > 0: The second derivative of e^(-x) is e^(-x), which is always positive for all x.

To learn more about Function, click here:

brainly.com/question/12431044

#SPJ11

The required answer is lim(n→∞) (a_n/b_n) = lim (n→∞) ((2n + 2)/(n(n-1)(n-2))) / (1/n^2)

To use the Limit Comparison Test, we need to identify a series with known convergence properties that is similar to the given series. We can do this by finding bn in the following limit:

lim n→[infinity] (an/bn) = lim n→[infinity] (2n + 2)/(n(n − 1)(n − 2)) = L

To find bn, we need to look for a dominant term in the denominator that behaves similarly to n(n − 1)(n − 2). One such term is n^3, since it is the highest order term in the denominator. Therefore, we can set bn = n^3 and simplify the limit:

lim n→[infinity] (2n + 2)/(n(n − 1)(n − 2)) * (n^3)/(1) = lim n→[infinity] (2n + 2)/(n^4 - 3n^3 + 2n^2)

This limit can be evaluated using L'Hopital's Rule, which gives:

lim n→[infinity] (2n + 2)/(4n^3 - 9n^2 + 4n) = lim n→[infinity] (1/n^2)

Since the limit is a nonzero finite value, L = 1. By the Limit Comparison Test, the given series converges if and only if the series with general term bn = n^3 converges.

We know that the series with general term bn = n^3 is a p-series with p = 3, which converges since p > 1. Therefore, by the Limit Comparison Test, the given series also converges.

In summary, the given series is convergent.
To use the Limit Comparison Test, we first need to identify a simpler series b_n that we can compare the given series to. We are given the series an = (2n + 2)/(n(n-1)(n-2)). We can choose b_n = 1/n^2 since the highest degree in the numerator and denominator are the same.

Next, we'll calculate the limit L as n approaches infinity of the ratio a_n/b_n:
lim(n→∞) (a_n/b_n) = lim(n→∞) ((2n + 2)/(n(n-1)(n-2))) / (1/n^2)

To simplify the expression, we can multiply the numerator and denominator by n^2:
A divergent series is an infinite series that is not convergent, which means that the infinite sequence of the series partial sums has no finite limit.

lim (n→∞) ((2n + 2)n^2) / (n(n-1)(n-2))

Now, we'll divide each term by n^2 to simplify the limit expression:

lim (n→∞) (2 + 2/n) / ((1)(1-1/n)(1-2/n))

As n approaches infinity, the terms with n in the denominator approach 0:

lim (n→∞) (2) / (1) = 2

Since L = 2 is a finite positive number, the Limit Comparison Test tells us that the original series a_n converges or diverges based on the behavior of the series b_n. We know that the series b_n = 1/n^2 is a convergent p-series with p = 2, which is greater than 1. Therefore, the series b_n converges.
A series said to be convergent when  the limits of the series converges to the finite possible value for the series.
Since bn converges and L is a finite positive number, we can conclude that the original series a_n also converges according to the Limit Comparison Test.

To know more about converges or diverges. Click on the link.

https://brainly.com/question/31402157

#SPJ11

Step-by-step explanation:

The diagram is not included:

18 ft  x  10 ft  =  180 ft^2

180 ft^2  *  $ 3.19 / ft^2 = $  574.20     for a rectangular pool cover

If it is triangular    1/2 * 10 * 18   * $3.19 = $287.10

The dimension of the row space of matrix A is 2, the dimension of the column space of A is 4, and the dimension of the null space of A is 3.

To find the dimension of the row space of A, we can count the number of nonzero rows in the echelon form. Since there are two zero rows, the echelon form has 4 - 2 = 2 nonzero rows. Therefore, the dimension of the row space of A is 2.

To find the dimension of the column space of A, we can count the number of pivot columns in the echelon form. Since there are two zero rows, there are at most 5 pivot columns. However, since A is a 4 times 7 matrix, there must be exactly 4 pivot columns. Therefore, the dimension of the column space of A is 4.

To find the dimension of the null space of A, we can use the rank-nullity theorem. The rank of A is the dimension of the column space, which we found to be 4. The nullity of A is the dimension of the null space, which is given by nullity(A) = n - rank(A), where n is the number of columns of A. In this case, n = 7.

Therefore, nullity(A) = 7 - 4 = 3. Therefore, the dimension of the null space of A is 3.

Know more about matrix here:

https://brainly.com/question/27929071

#SPJ11

The value of double integral is: (1/2) (1 - e) (1 - e).

To solve this integral, we will use the method of iterated integration. Let's first integrate with respect to x, treating y as a constant:

∫ e to 1 ( x ⋅ ln ( y ) / √ y y ⋅ ln ( x ) / √ x ) dx

Using substitution, let u = ln(x), du = 1/x dx, we get:

= ∫ e to 1 ( u / √ y y ) du

= [ ∫ e to 1 ( u / √ y y ) du ]

Now we integrate with respect to u:

= [ [ (1/2) u² ] from e to 1 ]

= (1/2) (1 - e)

Now, we integrate the remaining expression with respect to y:

= ∫ e to 1 (1/2) (1 - e) dy

= (1/2) (1 - e) [ y ] from e to 1

= (1/2) (1 - e) (1 - e)

So the value of given double integral is (1/2) (1 - e) (1 - e).

Learn more about integral

brainly.com/question/18125359

#SPJ11

The numerical value of A2 = 10, A3 = 1, A4 = 10, A5 = 1, A6 = 10, A7 = 1, A8 = 10, and so on and the general form of An is 10.

The pattern is that A2, A4, A6, A8, etc. are all 10, while A3, A5, A7, A9, etc. are all 1. Therefore, the general formula for An is An = 10 if n is even, and An = 1 if n is odd. This pattern is a result of the alternating values of 1 and 10 in the original sequence.

By squaring any odd number (i.e., A2, A4, A6, etc.), we always get 100, and by squaring any even number (i.e., A3, A5, A7, etc.), we always get 1. This pattern continues indefinitely, and the general formula for An allows us to easily determine any term in the sequence without having to calculate all of the previous terms.

To know more about original sequence click on below link:

https://brainly.com/question/13265939#

#SPJ11

The degree of freedom for the t statistic, in this case, is 18.

Hi! To answer your question about testing the difference between the means of two normally distributed independent populations with sample sizes of n1 = 10 and n2 = 10, we will use the formula for degrees of freedom (df) in a two-sample t-test:

df = (n1 - 1) + (n2 - 1)

Plug in the sample sizes, n1 = 10 and n2 = 10:

df = (10 - 1) + (10 - 1)

df = 9 + 9

df = 18
The degrees of freedom for the t statistic in this case is 18.

Learn more about hypothesis testing

brainly.com/question/30588452

#SPJ11