Answer:
The Bell Boeing V-22 Osprey is an American multi-mission, tiltrotor military aircraft ... However, the V-22 is generally not capable of hovering on one engine.
A rectangular pool is being constructed with a length that is four times the width. There will be a walkway constructed around the pool that is 6 feet wide all around. Write a factored expression for the area in square feet of the pool and the walkway combined.
Answer:
(4x²+36) feet²
Step-by-step explanation:
Area of the pool = L × W
Take width as x and Length as 4x
4x × x = (4x²)feet² {area of pool}
Area of walkway = L × W
6 × 6 = 36feet²
Total area = 4x² + 36 feet²
40 POINTS!!!
Two construction companies are building homes in a new neighborhood. Company A has built 18 homes and plans to build an additional 6 homes each month. Company B has built 41 homes and plans to build an additional 4 homes each month. if building goes according to their plans, in how many months will the total number of homes built by the companies be equal to each other?
Answer:
14 months until there equal
Answer:
14 months
Step-by-step explanation:
ted is twice his sister's age and three years younger than joe. ted's sister is half of a century plus ten. how old is ted how old is ted's sister
Answer:
120, 60
Step-by-step explanation:
half a century = 60 + 10 x 2 = ted.
she is 60.
The groundhog population of Punxsutawny, Pennsylvania is closely monitored each year. Two years ago the population decreased by 12%. Last year the number of groundhogs increased by 6%. This year the population also increased by 9%. What was the percentage increase/decrease of groundhogs over these three years? Round your answer to the nearest tenth of a percentage poin
Answer:
There was a increase of 1.7% over these three years
Step-by-step explanation:
Multipliers:
For a decrease of a%, we multiply by: [tex]\frac{100-a}{100}[/tex]
For a increase of a%, we multiply by: [tex]\frac{100+a}{100}[/tex]
What was the percentage increase/decrease of groundhogs over these three years?
Decrease of 12%(multiplication by 0.88).
Increase of 6%(multiplication by 1.06).
Increase of 9%(multiplication by 1.09).
After these three years:
0.88*1.06*1.09 = 1.017
1.017 - 1 = 0.017
0.017*100% = 1.7%
There was a increase of 1.7% over these three years
What is the area of the parallelogram?
Answer:
im not 100 percent sure but i think its
140 inches squared
Step-by-step explanation:
The dot plot below shows the number of movies rented last month by students in Ms. Underwood's class.
What is the median number of movies rented?
A.
4
B.
6
C.
3
D.
2
Answer:
the answer gonna be 3
Answer: I the answer is 3 100%
Step-by-step explanation: I took the test
Will give brainliest
Answer: Because the question uses the word “distinct” meaning obvious, and clear, I would select AB, AC, CB. (If it’s asking for all the possible line segments, I would select AB, AC, CB, BA, CA, BC).
4. Let's say we do an opinion poll and find that 56% of the people say the Green Bay Packers
are their favorite team, while 22% choose the Chicago bears, and 10% choose the Dallas
Cowboys. What percent of people must have a favorite team other than these three teams?
Please help me 7th grade math math
Answer: 1/8
Step-by-step explanation: hoped this helped:))
Answer:
i think its 1/3
Step-by-step explanation:
simplify 3 times x² times y times 4z times x times 2y times z
Answer:
3(x^2 x Y)(4z x X)(2y x Z)
Step-by-step explanation:
Answer:
[tex]3(x^{3} * 2y^2*4z^2)[/tex]
Step-by-step explanation:
x^2(x) = x^3
2y(y) = 2y^2
4z(z) = 4z^3
Multiple it all by 3
Find the Perimeter of this figure. I do y get it
Answer:
56m
Step-by-step explanation:
5+7+5+11+7+16+5
= 56
Evaluate the piecewise function when x = -1.
Step-by-step explanation:
-2<-1<1, so f(-1)=-1-2=-3
Solve for x:
2x + 9 = 3
Answer:
x = -3
Step-by-step explanation:
2x + 9 = 3
2x = 3 - 9
2x = -6
x = -3
Answer:
- 3
Step-by-step explanation:
given
2x + 9 = 3
2x = 3 - 9
2x = - 6
x = - 6/2
x = - 3
hope it helps :)
Use the remainder theorem to determine which of the following is not a factor of x^3-5x^2-x+5
Answer:
The answer is A
Step-by-step explanation:
x to the power of 1 is the lowest x and when you multiply -5 and -5 you get 5 so the answer is A.
What do those emojis mean in words?
If a•b=b, what must the value of a be?
A.1
B.0
C.2
D.b
Answer:
a
Step-by-step explanation:
an example
1x2=2
1 is a, 2 is b, see they equal the same 2 and 2.
Answer:
B. 0
Step-by-step explanation:
Any number multiplied by 0 equals zero.
Help pleaseeeeeeeeeeee
Answer:
3Step-by-step explanation:
When looking at a graph, the greatest speed will be the steepest part. Even though one line is further than another, does not mean it is faster.
Will give the brainliest answer and 20 points to anyone who can give a complete answer and not a scam link or a joke answer or begging for points (those 3 types of answers will be reported)
Courtney and Christy both leave the coffee shop at the same time, but in opposite directions. If Christy travels 9 mph faster than Courtney and after 7 hours they are 189 miles apart, how fast is each traveling?
Courtney is traveling ___________ mph.
Christy is traveling _____________ mph.
Answer:
Courtney is travelling at 9mph
Christy is travelling at 18mph
Step-by-step explanation:
Courtney's speed = x
Christy's speed = y
Christy travels 9 mph faster than Courtney: x+9=y
Distance = speed * time
Courtney's distance after 7 hours = 7x
Christy's distance after 7 hours = 7y
After 7 hours, they're 189 miles apart:
7x+7y=189
x+y=27
x+y=27
x+x+9=27
2x=18
x=9
y=x+9
y=9+9
y=18
Find mean & margin of error if 28.4 < µ < 38.8
Answer:
The mean is of 33.6
The margin of error is of 5.2.
Step-by-step explanation:
Confidence interval concepts:
A confidence interval has two bounds, a lower bound and an upper bound.
A confidence interval is symmetric, which means that the point estimate used is the mid point between these two bounds, that is, the mean of the two bounds.
In this question:
Lower bound: 28.4
Upper bound: 38.8
Mean
(28.4+38.8)/2 = 33.6.
The mean is of 33.6
Margin of error:
(38.8 - 28.4)/2 = 5.2
The margin of error is of 5.2.
A 1/17th scale model of a new hybrid car is tested in a wind tunnel at the same Reynolds number as that of the full-scale prototype. The drag coefficient of the model is the same as that of the prototype. Assuming the model and prototype are both tested in air, find the ratio of the drag on the scale model (Fm) to the drag on the prototype (Fp), i.e., Fm/Fp. Since the size of the model is 1/17th of the size of the prototype, the projected area of the model is (1/17)2 of the projected area of the prototype. Round your answer to the nearest tenth.
Answer:
The ratio of the drag coefficients [tex]\dfrac{F_m}{F_p}[/tex] is approximately 0.0002
Step-by-step explanation:
The given Reynolds number of the model = The Reynolds number of the prototype
The drag coefficient of the model, [tex]c_{m}[/tex] = The drag coefficient of the prototype, [tex]c_{p}[/tex]
The medium of the test for the model, [tex]\rho_m[/tex] = The medium of the test for the prototype, [tex]\rho_p[/tex]
The drag force is given as follows;
[tex]F_D = C_D \times A \times \dfrac{\rho \cdot V^2}{2}[/tex]
We have;
[tex]L_p = \dfrac{\rho _p}{\rho _m} \times \left(\dfrac{V_p}{V_m} \right)^2 \times \left(\dfrac{c_p}{c_m} \right)^2 \times L_m[/tex]
Therefore;
[tex]\dfrac{L_p}{L_m} = \dfrac{\rho _p}{\rho _m} \times \left(\dfrac{V_p}{V_m} \right)^2 \times \left(\dfrac{c_p}{c_m} \right)^2[/tex]
[tex]\dfrac{L_p}{L_m} =\dfrac{17}{1}[/tex]
[tex]\therefore \dfrac{L_p}{L_m} = \dfrac{17}{1} =\dfrac{\rho _p}{\rho _p} \times \left(\dfrac{V_p}{V_m} \right)^2 \times \left(\dfrac{c_p}{c_p} \right)^2 = \left(\dfrac{V_p}{V_m} \right)^2[/tex]
[tex]\dfrac{17}{1} = \left(\dfrac{V_p}{V_m} \right)^2[/tex]
[tex]\dfrac{F_p}{F_m} = \dfrac{c_p \times A_p \times \dfrac{\rho_p \cdot V_p^2}{2}}{c_m \times A_m \times \dfrac{\rho_m \cdot V_m^2}{2}} = \dfrac{A_p}{A_m} \times \dfrac{V_p^2}{V_m^2}[/tex]
[tex]\dfrac{A_m}{A_p} = \left( \dfrac{1}{17} \right)^2[/tex]
[tex]\dfrac{F_p}{F_m} = \dfrac{A_p}{A_m} \times \dfrac{V_p^2}{V_m^2}= \left (\dfrac{17}{1} \right)^2 \times \left( \left\dfrac{17}{1} \right) = 17^3[/tex]
[tex]\dfrac{F_m}{F_p} = \left( \left\dfrac{1}{17} \right)^3[/tex]= (1/17)^3 ≈ 0.0002
The ratio of the drag coefficients [tex]\dfrac{F_m}{F_p}[/tex] ≈ 0.0002.
A quarter has a diameter of 24 mm.
Which measurement is closest to the
circumference of the quarter in
millimeters?
A. 452.39 mm
B. 37.7 mm
C. 75.4 mm
D. 150.8 mm
Answer:
C or D
Step-by-step explanation:
Which function is continuous at x = –4?
Answer:
The correct answer is C. I tried B and got it wrong
Step-by-step explanation:
What is the equation of the following line?
Answer:
Answer is F. y = 6x
Step-by-step explanation:
Help please I’ll give extra points and brainlist
Answer:
Step-by-step explanation:
Probably D, he's measuring voltage across the wire.. and then across the light bulb, there would be very little across the wire and a lot across the light bulb
NASA is conducting an experiment to find out the fraction of people who black out at G forces greater than 6. In an earlier study, the population proportion was estimated to be 0.3 . How large a sample would be required in order to estimate the fraction of people who black out at 6 or more Gs at the 80% confidence level with an error of at most 0.03
Answer:
A sample of 383 would be required.
Step-by-step explanation:
In a sample with a number n of people surveyed with a probability of a success of [tex]\pi[/tex], and a confidence level of [tex]1-\alpha[/tex], we have the following confidence interval of proportions.
[tex]\pi \pm z\sqrt{\frac{\pi(1-\pi)}{n}}[/tex]
In which
z is the zscore that has a pvalue of [tex]1 - \frac{\alpha}{2}[/tex].
The margin of error is:
[tex]M = z\sqrt{\frac{\pi(1-\pi)}{n}}[/tex]
In an earlier study, the population proportion was estimated to be 0.3.
This means that [tex]\pi = 0.3[/tex]
80% confidence level
So [tex]\alpha = 0.2[/tex], z is the value of Z that has a pvalue of [tex]1 - \frac{0.2}{2} = 0.9[/tex], so [tex]Z = 1.28[/tex].
How large a sample would be required in order to estimate the fraction of people who black out at 6 or more Gs at the 80% confidence level with an error of at most 0.03?
A sample of n is needed.
n is found when M = 0.03. So
[tex]M = z\sqrt{\frac{\pi(1-\pi)}{n}}[/tex]
[tex]0.03 = 1.28\sqrt{\frac{0.3*0.7}{n}}[/tex]
[tex]0.03\sqrt{n} = 1.28\sqrt{0.3*0.7}[/tex]
[tex]\sqrt{n} = \frac{1.28\sqrt{0.3*0.7}}{0.03}[/tex]
[tex](\sqrt{n})^2 = (\frac{1.28\sqrt{0.3*0.7}}{0.03})^2[/tex]
[tex]n = 382.3[/tex]
Rounding up:
A sample of 383 would be required.
There are 2.54 centimeters in 1 inch. There are 100 centimeters in 1 meter.
To the nearest inch, how many inches are in 8 meters?
Answer:
314.96in
Step-by-step explanation:
Can someone help me with this problem please. ( I need it as fast as possible).
Answer:
D-B-A-C
Step-by-step explanation:
At 3:30 p.m., you have 15 megabytes of a movie. At 3:45 p.m., you have 75 megabytes. What is the download rate in megabytes per minute?
Please explain step by step I dont get it.
Answer: B
Step-by-step explanation:
108 divide by 54 = 2
That equation means she paid 2 dollars per ticket, not 1 dollar for 2 tickets
(There is no 1 in the equation also)
The net of a triangular prism is shown
below.
8.5 cm
10 cm
10 cm
10 cm
What is the total surface area of the prism?
A 470 cm?
C 390.5 cm?
B 385 cm
D 342.5 cm
Answer:
i think a.... sorry if im wrong
Step-by-step explanation: