velocity and acceleration quick check 2 of 52 of 5 items question use the data table to answer the question. it shows the acceleration of a body when a net force is applied to it. net force (n) mass (kg) acceleration (m/s2) 5.0 5.0 1.0 10.0 5.0 2.0 20.0 5.0 which value would complete the last cell?

The old kettle with a power rating of 1.4kw, and the one with a power rating of 2.0kw. With this condition, this will affect the time it takes to boil a fixed volume of water quicker than before.

In electrical engineering and mechanical engineering, the power rating of equipment is the highest power input allowed to flow through particular equipment. According to the particular discipline, the term power may refer to electrical or mechanical power.

How does power rating affect the time it takes to boil a fixed volume of water?

Since, the power rating is higher, logically it has higher power than before. Since it is a fixed volume of water, so the only difference is power rating. With greater power, it will take shorter amount of time to boil the same water by volume.

Learn more about power rating https://brainly.com/question/24191483

#SPJ4

The reaction which occurs between water and pyridine is

C5H5H + H2O → C5H5NH+ + OH-

pyridine is a basic heterocyclic organic compound with a structure like  benzene with one methine group replaced by a  nitrogen

pyridine reacts with water where it may oxidizes  water

The following reaction occurs when water is reacted with pyridine is

C5H5H + H2O → C5H5NH+ + OH-

C5H5N + H+ → C5H5NH+

pyridine is a hydrogen ion acceptor as new bonds are formed between nitrogen to form a new compound

Bronsted-Lowry acids, on the other hand, are solutions that act as a proton or hydrogen ion donors

pyridine is the proton acceptor and water is the proton donor as it donates its proton to pyridine.                                                                                                                  To learn more about bronsted-lowry acids see more https://brainly.com/question/14407412?referrer=searchResults

#SJP4

93.6 joule is the energy if source emit in one hour and its power output remains constant

I= 0.026 W/m^2

t= 3600 sec

power= energy/time

energy=power×time

energy= 0.026×3600

energy=93.6 joule

Energy is the ability to perform work in physics. Different shapes, such as potential, kinetic, thermal, electrical, chemical, radioactive, etc., may be assumed by it. Other instances of energy being transmitted from one body to another include heat and work. Energy is always distributed after it has been transferred in accordance with its type. Thus, heat transfer could result in thermal energy, whereas work could result in mechanical energy.

Motion is a trait shared by all forms of energy. For instance, if a body is moving, it possesses kinetic energy. Due to the object's design, which integrates potential energy, a tensioned object, such a spring or bow, has the ability to move even when at rest.

To know more about  energy visit : brainly.com/question/1932868

#SPJ4

Electromagnetic radiation consists of electromagnetic field waves that propagate through space and carry electromagnetic radiation energy. These include X-rays, gamma rays, microwaves, infrared rays, light, and radio waves. In the electromagnetic spectrum, all of these waves are included.

For the wavelength:

Wave A has four crests, thus its wavelength can be calculated as follows:

λ = L/4

Where, λ = wavelength of a wave

L = total length of wave (1.6 × 10⁻³ m)

λ = 1.6 × 10⁻³ /4

λ = 4.1 × 10⁻⁴ m

Wave B has eight crests, thus its wavelength can be calculated as:

λ = L/8

Where, λ = wavelength of the wave

L = total length of wave (1.6 × 10⁻³ m)

λ = 1.6 × 10⁻³/8

λ = 2.0 × 10⁻⁴ m

This, explains that wave A has a higher wavelength.

Also, the wavelength in the range of 10⁻⁴m corresponds to the infrared region.

For the frequency:

ν = c/λ

Where, ν = frequency

c = speed of light (2.99 × 10⁸ m/s)

λ = wavelength

Wave A has a wavelength of 4.1 × 10⁻⁴ m, so the frequency of the photon will be:

ν = 2.99 × 10⁸/4.1 × 10⁻⁴

ν = 7.49 × 10¹¹ s⁻¹

Wave B has a wavelength of 2.0 × 10⁻⁴ m, so the frequency of photon will be:

ν = 2.99 × 10⁸/2.0 × 10⁻⁴

ν = 1.49 × 10¹² s⁻¹

Hence, wave B has a higher frequency.

For photon energy:

E = hν

Where, E = photon energy

h = plank's constant (6.626 × 10⁻³⁴ Js)

ν = frequency

Wave A has a frequency of 7.49 × 10¹¹ s⁻¹:

E = (6.626 × 10⁻³⁴)(7.49 × 10¹¹)

E = 4.96 × 10⁻²³ J

Wave A has a frequency of 1.49 × 10¹² s⁻¹:

E = (6.626 × 10⁻³⁴)(1.49 × 10¹²)

E = 49.93 × 10⁻²² J

Hence, wave B has greater energy.

To know more about electromagnetic radiation, visit:

https://brainly.com/question/10759891

#SPJ4

Radiation dosage is usually measured in rads.

When ionizing radiation enters a human body or object, it stores energy. The energy absorbed by exposure to radiation is called dose. Radiation dose size is expressed in three ways: absorbed, equivalent and effective.

The energy absorbed by the human body after being exposed to radiation is called the absorbed dose. Absorbed dose is measured in units called Grays (Gy). A dose of 1 Gray corresponds to 1 Joule of energy stored in 1 kilogram of matter. Radiation has always been around us. In fact, life evolved in a world containing significant amounts of ionizing radiation. It comes from space, earth, and even from within our own bodies. Natural background radiation doses vary by location and habits.

To know more about radiation dosage visit:

https://brainly.com/question/29375503

#SPJ4

The ratio of output power for the two turbines is:

P₁/P₂ = 8.87³/ 8.34³

P₁ = 1.203 P₂

Power, the amount of energy transferred or converted per unit time. In the International System of Units, the unit of power is the watt, which is equivalent to 1 joule per second. Power is a scalar quantity.

Now let's discuss about the mentioned case:

For flat agricultural land:

Given,

Height (h₁) = 100 m

Wind velocity = 10 m/s

Height of wind turbines (h₂) = 40 m

For flat agricultural land let's consider the roughness to be of class 1.

So, f₀ = 0.03 ( coefficient of friction)

∴ v₂ = v₁ × ln (h₂/f₀) / ln (h₁/f₀)

= 10 × ln(40/0.03) / ln(100/0.03)

= 10 × 7.195/8.112

= 8.87 m/s

For forest land:

Given,

Height (h₁) = 100 m

Wind velocity = 10 m/s

Height of wind turbines (h₂) = 40 m

For forest and let's consider the roughness to be of class 3.

So, f₀' = 0.4 ( coefficient of friction)

∴ v₂' = v₁ × ln (h₂/f₀') / ln (h₁/f₀')

= 10 × ln(40/0.4) / ln(100/0.4)

= 10 × 4.605/5.521

= 8.34 m/s

Now, power output (P): ¹/₂ ρAv³C

Where, P = power

ρ = density of air

A = swept area

C = power coefficient

v = wind speed

P₁/P₂ =  ¹/₂ ρAv₂'³C / ¹/₂ ρAv₂'³C

P₁/P₂ = 8.87³/ 8.34³

P₁ = 1.203 P₂

P₁ = Power of wind turbine in flat agricultural land

P₂ = Power of wind turbine in forest

Using above explanation we can conclude that the wind turbine in flat agricultural land produces more power than the wind turbine in forest.

To know more about power, visit:

https://brainly.com/question/17614839

#SPJ4

Star b will have better fusion rate as compared to star a.

What is nuclear fusion reaction?

It is the reaction which powers the sun and other stars. In this reaction, two small nuclei fuse together to form one single heavier nucleus. During this process, large amount of heat is being liberated out.

The rate of fusion reaction increases rapidly with temperature until it reaches a point where it maximizes and then falls. Hence, it depends upon the numeric value of temperature taken. The star with temperature 3t will have a good fusion rate as compared to the star a with t temperature. There are many other things as well, which has to be kept in mind and it comes later on in the reaction.

To know more about nuclear fusion reaction, click on the following link

https://brainly.com/question/17870368

#SPJ4

The time taken for the projectile to hit the the ground from a ramp of height 1.5 m is 0.55 seconds.

Time can be defined as an ongoing and continuous sequence of events that occur in succession, from past through the present, and to the future.

To calculate the time it takes the projectile to hit the ground, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1 and solve for t.

Hence, the time taken is 0.55 seconds.

Learn more about time here: https://brainly.com/question/26046491

#SPJ1

This statement is FALSE, the visible surface of the sun is composed of solid matter.

The sun is made totally out of plasma, the fourth nation of depending after gasoline, liquid, and strong, and the most energetic. As you could consider, the sun is tremendously hot. It varies among nine,900-27,000,000°F in temperature among the “surface” (the outer limb of its environment where it becomes obvious to light as opposed to opaque), and the middle.  

Unlike the gasoline massive planets, which probably have a strong middle, the sun is made nearly out of hydrogen and helium, the lightest of all the elements, and at no point, internal should either of those exist as a solid at the one’s temperatures, despite the awesome pressures that exist in the solar. It’s plasma all the way down, even at the center where the density is ten instances that of gold.

To learn more about the sun visit here:

brainly.com/question/13353299

#SPJ4

Forces can be divided into primarily into two types of forces: Contact Forces. Non-contact Forces.

In physics, pressure is an influence that can trade the motion of an item. A force can reason an item with mass to exchange its velocity (e.g. transferring from a country of rest), i.e., to boost up. force can also be described intuitively as a push or a pull. A pressure has each importance and route, making it a vector quantity. it's far measured in the SI unit of newton (N). force is represented by way of the image F (previously P).

The unique form of Newton's 2d law states that the internet force appearing upon an object is equal to the fee at which its momentum changes with time. If the mass of the item is constant, this law means that the acceleration of an item is at once proportional to the net force performing on the item, is in the path of the net force, and is inversely proportional to the mass of the object.

To learn more about Force visit here:

brainly.com/question/13191643

#SPJ4

The observed frequency increases and ear hears a higher pitch.

The Doppler Effect is the change in wave frequency caused by the relative motion of a wave source and its observer. Christian Johann Doppler discovered it and described it as the process of increasing or decreasing starlight based on the relative movement of the star.

The Doppler effect, also known as the Doppler shift, is a phenomenon that occurs when the source of waves moves in relation to an observer. A common physical demonstration of the Doppler Effect is an ambulance crossing you with its siren blaring. The Doppler effect is important in astronomy because it allows us to calculate the velocity of light-emitting objects in space, such as stars or galaxies.

To learn more about Doppler Effect, here

https://brainly.com/question/15318474

#SPJ4

It can be concluded that at one time in the past, South America and Africa were once one. Beside of the same type of plant foil on the eastern coast of South America and western coat of Africa, we can identify other similar reason that the coastlines of South America and Africa on opposite sides of the Atlantic Ocean seem to fit together.

Yes, is it. Let's back to 1915, a German scientist named Alfred Wegener, proposed that continents could move around on the earth’s surface. He said that in the past there is a supercontinent in the earth named Pangea Continent. Not only South America and Africa, but also all of the continents were all together in the past.

Learn more about Pangea Supercontinents https://brainly.com/question/1867605

#SPJ4

Answer:

Example for 1. Law of Inertia

Falling forward while getting down from a moving bus:

When a passenger gets down from a moving bus, their upper body is still in motion, and when it comes in contact with the ground which is at rest, their body topples forward due to the inertia of motion.

Example for 2. Law of Acceleration

Hitting a Ball:

A ball develops a certain amount of acceleration after being hit. The acceleration with which the ball moves is directly proportional to the force applied to it. This means that the harder you hit the ball, the faster it will move

Example for 3. Law of Interaction

Walking:

Whenever people walk, their foot exerts a force on the ground. The ground then exerts an equal force which points in the opposite direction. It is this force (force due to friction) that allows the person to move forward.

Example for 4. Work and Power

As P=F.v

Cycling:

A person riding a bicycle possesses some amount of energy. This energy is utilized by the cyclist to do work on the paddles of the bicycle by applying some force and enabling the bicycle to move forward.

Example for 5. PE to KE

An apple hanging on a tree:

It has the potential energy due to its raised position. When the apple falls from the tree. The falling apple has the kinetic energy. Thus the potential energy stored in the apple in its raised position changes into the kinetic energy when the apple is falling. This kinetic energy does work on stone as the apple strikes the stone, and it makes the stone to move into the ground.

Example for 6. Sound and Light

TV:

We see TV takes electrical energy as input and produces. light energy, sound energy.

Example for 7. Heat and Electricity

The electric heaters:

An electric heater is an electrical device that converts an electric current into heat.

There have 3 forces acting on the helicopter.

There have 2 forces acting on the load.

Magnitude of net force = 200 N.

Magnitude of acceleration of the system = 0.0833  m/s².

The speed of the system is increasing.

Given parameters:

Mass of the helicopter, M = 2000 kg

Mass of the load; m = 400 kg

Thrust force; F =  26000 N.

Hence, there have 3 forces acting on the helicopter:  weight of the helicopter, weight of the load, and thrust.

There have 2 forces acting on the load: weight of the load and thrust.

Total mass of the system = M +m = 2000 kg + 400 kg = 2400 kg.

Magnitude of net force = Thrust - weight of the system

= F - (M + m)g

= 26000 - (2000 + 400) × 10

= 200 N.

Magnitude of acceleration of the system = Magnitude of net force / Total mass of the system

= 200/2400 m/s².

= 0.0833  m/s².

Hence, the speed of the system is increasing.

Learn more about speed here:

https://brainly.com/question/28224010

#SPJ1

The work energy of speed is 1304.2.

What is work energy?
Work energy is the most fundamental quantity of physics. Work is said to be done when a force applied to an object cause a displacement of a object.

Solution -
As per the given-
Mass of runner m = 74kg
Initial velocity of runner u=4.8 m/s
Final velocity of runner v =0
Coefficient of friction ¥=0.7
Let's d be the distance moved by runner till the stop.
a- mechanical energy lost due to friction
As friction does negetive work causing the runner to stop.
As we know,
Mechanical energy lost= Kinetic energy of runner
Mechanical energy lost = 1/2 mv^2 = 1/2 ×74×4.8^2=852.2

Distance move by runner- Work done by friction = mechanical energy lost
-¥×mg×d =852.2 j
-0.7×74×9.8×d = -491.2
Solving the equation we get
1304.2.

To know more about work energy click-

https://brainly.com/question/10063455

#SPJ9

The energy emitted by a photon is equal to 7,72 × 10⁻¹⁰ J.

To answer this sola we use the photon energy formula:

E = h(c/λ)

Where:

Once the values ​​are known, enter them into the formula:

E = h(c/λ)

[tex]E = 6,6 * 10^{-34} \frac{6*10^{14} }{5,1 *10^{-10}}[/tex]

[tex]E = 6,6 * 10^{-34}(1,17 *10^{24})[/tex]

[tex]E = 7,72*10^{-10} J[/tex]

So, we can conclude that the approximate energy of one photon of this light is 7,72 × 10⁻¹⁰ J.

Learn more about photon energy at https://brainly.com/question/13886090

#SPJ4

Based on the data table, the acceleration of this model car at 3. 5 seconds is equal to: D. 10 m/s/s.

By critically observing the data provided in the data table, we can logically deduce that there exist a proportional relationship between the velocity of this model car (in m/s) and the time taken (in seconds).

Mathematically, a proportional relationship can be represented with the following mathematical expression:

v = kt

Where:

Next, we would determine the constant of proportionality (k) as follows:

Constant of proportionality (k) = v/t

Constant of proportionality (k) = 10/1

Constant of proportionality (k) = 10.

For the velocity at time, t = 3.5 seconds, we have the following:

Velocity, v = kt

Velocity, v = 10 × 3.5

Velocity, v = 35 m/s.

Mathematically, the acceleration of a physical object can be calculated by using this formula:

Acceleration = change in velocity/change in time

Substituting the given parameters into the formula, we have;

Acceleration = (35 - 15)/(3.5 - 1.5)

Acceleration = 20/2.0

Acceleration = 10 m/s/s.

Read more on acceleration here: brainly.com/question/24728358

#SPJ1

Answer:

10 m/s

Explanation:

The crushing can experiment shows the relationship between the gases in a can and the air pressure.

Before we can understand the crushing can experiment, we need to bear at the back of our minds that in the kinetic molecular theory of gases, we are told that gas molecules are in constant random motion and that they collide with the walls of the container.

Now, in the crushing can experiment, we have steam that is held at a high temperature so that the molecules are moving rapidly and exerting pressure on the walls of the container. This pressure that is exerted by the gases in the can counterbalances the air pressure.

If the can is cooled such that the gases are less mobile and exert less pressure, then the air pressure on the can would exceed the pressure exerted by the gases inside the can and the can would squeeze.

Learn more about crushing can experiment:https://brainly.com/question/15006049

#SPJ1

The weight of the block is F₀ × g/(g + 3a)

Mass of an object is the same everywhere in the universe. Weight, on the other hand, varies by location. Mass is measured in kilograms. We usually say kilograms for weight, but strictly speaking, it must be measured in Newtons, which is a unit of force. Weight equals mass multiplied by applied gravity. i.e. W = mg

For the given case:

Mass of block = m

Acceleration = 3a

Force = F₀

So, F₀ - mg = m × 3a

F₀ = mg + m3a

F₀ = m(g + 3a)

m = F₀/(g + 3a)

Now, weight = mg

Where, g = 9.8 m/s²

W = F₀/(g + 3a) × g

W = F₀ × g/(g + 3a)

To know more about weight and mass visit:

https://brainly.com/question/13040516

#SPJ4

Explanation:

Select the type or types of energy the ball has at the top of the hill.

gravitational potential energy

Select the type or types of energy the ball has halfway down the hill.

gravitational potential energy

rotational kinetic energy

kinetic energy

Select the type or types of energy the ball has on the level ground.

kinetic energy

Cotivational Kinitics Energy

Explanation:

-20 mph is the the relative velocity of  vba

Va=30 mph

Vb=10 mph

Vab= Vb - Va = 20 mph

Vba=Va - Vb= -20 mph

An object's relative velocity is the speed at which it moves in relation to another object. It serves as a method of determining how swiftly two objects are traveling with respect to one another. Relative velocity is essential to comprehending physics because it helps us grasp how objects move and interact with one another. Relative velocity can be estimated for a variety of interactions. An object's relative velocity is the speed at which it moves in relation to another object. It serves as a method of determining how swiftly two objects are traveling with respect to one another. Relative velocity is essential to comprehending physics because it helps us grasp how objects move and interact with one another.

To know more about relative velocity visit : brainly.com/question/12924624

#SPJ4

(a) The time taken for the ball to reach the maximum height is 1 second.

(b) The maximum height reached by the ball is 25 m.

The time taken for the ball to reach the maximum height is calculated as follows;

h = -16t²  +  32t  +  9

dh/dt = -32t + 32

dh/dt = v

where;

at maximum height, the final velocity, v = 0

0 = -32t   +  32

32t = 32

t = 32/32

t = 1 s

The maximum height reached by the ball is calculated as follows;

h = -16t²  +  32t  +  9

h = -16(1)²  +  32(1)  +  9

h = 25 m

Learn more about maximum height here: https://brainly.com/question/12446886

#SPJ1

The astronomer on duty going to have a bit of a problem satisfying her request after a white dwarf cools off it turns too bloodless and darkish to emit visible light.

According to astronomers, The fate of the left-over center relies upon its mass. If the left-over middle is about 1. four to 5 instances the mass of our solar, it'll crumble right into a neutron big name. If the middle is bigger, it's going to crumble right into a black hollow.

The growth and contraction of pulsating variables may be measured with the aid of using the Doppler effect. The traces inside the spectrum shift in the direction of the blue because the floor of the megastar moves in the direction of us after which shifts to pink as the floor shrinks again. Gold is uncommon in the course of the Universe as it's a tremendously hefty atom, such as seventy-nine protons and 118 neutrons.

Learn more about astronomers here:-https://brainly.com/question/1003405

#SPJ4

In general, collapse causes central heating, which ultimately causes temperatures conducive to hydrogen ignition. Particularly, material from the molecular cloud's outer reaches transforms gravitational potential energy into kinetic energy as it falls inward toward the cloud's core when gravity outweighs pressure.

The material is either added to the central protostar or spun out into the protoplanetary disc when it reaches the centre of the cloud, converting its kinetic energy into thermal energy. As more material is added, the protostar gets hotter and brighter.

When the centre of the object reaches temperatures of 10-15 million K and nuclear fusion starts, its central pressure and temperature likewise rise. Other angular momentum-related processes shape the material surrounding the collapsing core in the interim and regulate the volume of material engaged in the collapse.

what is kinetic energy?

Kinetic energy is a type of energy that is present in every object or particle that is moving. When work, which entails the exchange of electrons, is done on an object by applying a net force, that object acquires kinetic energy.

To learn more about kinetic energy

Here: https://brainly.com/question/8101588

#SPJ4

A dense core of material in a molecular cloud begins to collapse due to gravity.

What is gravity?
Gravity is indeed a fundamental interaction in physics that causes all objects with mass or energy to attract one another. The electromagnetic force, the weak interaction, and the strong interaction are all significantly stronger than gravity, which is by far the weakest of a four fundamental interactions. As a result, this has no appreciable impact on subatomic particle level phenomena. However, at the macroscopic level, gravity is the most important interaction between objects and governs the movement of planets, stars, galaxies, or even light. The Moon's gravity causes sublunar tides in the oceans, just as gravity on Earth gives weight to physical objects.

As it collapses, it heats up and the central regions become hotter than the surrounding material. This causes the central regions to become more dense and the surrounding material to be expelled. The star continues to collapse and heat up until it reaches the main sequence, where it stabilizes and begins to produce energy through nuclear fusion.

To learn more about gravity
https://brainly.com/question/557206
#SPJ4

a) there is a proportional relationship between the amount of time and distance from a lightning strike.

b)The distance from the lightning strike is 4,116 meter.

The speed of sound in air = 343 meters per second

Time to see lightning  = 12 second.

a)Time and distance are directly proportional to each other.

as we know:

distance = speed  x time

distance ∝ speed

distance ∝ time

b)The distance can be calculated as :

Distance = Speed x Time

Distance = 343 x 12

Distance = 4,116 meter.

a) there is a proportional relationship between the amount of time and distance from a lightning strike.

b)The distance from the lightning strike is 4,116 meter.

To know more about distance:

brainly.com/question/71956

#SPJ4

Desktop risers or toppers, commonly referred to as standing desk converters, are movable devices that you install on top of your current workstation.

You can choose to stand instead of removing or shifting your current desk thanks to them.They come in a variety of sizes, designs, and price ranges and often have a desktop surface with a separate keyboard tray.

Because they are frequently the least expensive and most straightforward way to start standing, standing desk converters are something you should think about if you want to keep your current workstation.

The appropriate standing desk converter for you will depend on your height, computing setup, available space, and spending limit.

Learn more about table height:

https://brainly.com/question/28290230

#SPJ4

The magnitude of the induced voltage in the coil is 0.25 V. The induced emf will be strong enough to counteract the underlying voltage shift.

Lentz's Law states that a coil will create or induce a back emf of V if a voltage of V is applied to it when it is not carrying any current. The same holds true if a coil is already carrying current; the back emf will then adapt to any applicable change in voltage (V) for the same reason. The voltage in inductors can be discontinuous, but the current is always a continuous function of time.

Learn more about voltage here-

https://brainly.com/question/13521443

#SPJ4

The magnitude of the centripetal force acting on an object traveling in a horizontal, circular path is  increases mass, velocity and radius of the path.

centripetal force:

It is a type of force which acting on a object on circular path that keeps the object moving on that path.

Centripetal force is calculated as:

F = 1/2(mv²)

where,

F = centripetal force

m = mass of the object

v = velocity of the object.

From the above relation centripetal force is directly proportional to the mass and velocity and inversely proportional to the radius.

The given question is incomplete. The complete question is

Which of the following would increase the magnitude of the centripetal force acting on an object traveling in a horizontal, circular path?

The magnitude of the centripetal force acting on an object traveling in a horizontal, circular path is  increases mass, velocity and radius of the path.

To know more about centripetal force :

https://brainly.com/question/11324711

#SPJ4

A 750kg car with an acceleration of 7.8m/s^2 will be as fast as 54.6m/s when it travels for 7 seconds.

It is a rate at which velocity changes with time, in terms of both speed and direction. A point or an object moving in a straight line is accelerated if it speeds up or slows down.

How to calculate the speed of 750kg car when traveling in 7 seconds?
Vf = Vo + a*t

Vo = initial speed = 0 (the car is at rest at a red light)

Vf = final speed

a = acceleration = 7.8m/s^2

t =time = 7s

Vf = Vo + a*t

Vf = 0 + 7.8 * 7
Vf = 54.6m/s

Learn more about acceleration https://brainly.com/question/13154163

#SPJ4