What does Newton's first law describes​

Answer:

The energy used for the 30-day period is 4878000 kilojoules.

Explanation:

According to the power bill, 1355 kilowatt-hours was used over a 30-day period. A kilowatt-hour is equal to 3600 kilojoules. Then, we calculate the energy used, measured in kilojoules, is determined by simple rule of three:

[tex]E = 1355\,kWh\times \frac{3600\,kJ}{1\,kWh}[/tex]

[tex]E = 4878000\,kJ[/tex]

The energy used for the 30-day period is 4878000 kilojoules.

Answer:

10000N

Explanation:

Given parameters:

Mass of the car  = 1000kg

Acceleration = 3m/s²

g  = 10m/s²

Unknown:

Weight of the car  = ?

Solution:

To solve this problem we must understand that weight is the vertical gravitational force that acts on a body.

 Weight  = mass x acceleration due to gravity

So;

    Weight  = 1000 x 10  = 10000N

Answer: pointing back

Explanation:

Answer:

85.77 m

Explanation:

From the question given above, the following data were obtained:

Initial velocity (u) = 41 m/s

Final velocity (v) = 0 m/s (at maximum height)

Acceleration due to gravity (g) = 9.8 m/s²

Maximum height (h) =?

The maximum height reached by the ball can be obtained as follow:

v² = u² – 2gh (since the ball is going against gravity)

0² = 41² – (2 × 9.8 × h)

0 = 1681 – 19.6h

Collect like terms

0 – 1681 = –19.6h

–1681 = –19.6h

Divide both side by –19.6

h = –1681 / –19.6

h = 85.77 m

Thus, the maximum height reached by the ball is 85.77 m

Answer:

This question appear incomplete

Explanation:

This question appear incomplete. However, the density of water is generally known to be 997 kg/m³. The formula used to determine density is mass ÷ volume. In the case of the density of water, the mass is measured in kilograms (kg) while the volume is measured in cubic meter (m³).

Explanation:

Given that,

Number of turns in the coil, N = 100

Area of the coil, A = 100 cm² = 0.01 m²

It is placed at an angle of 70°.

Magnetic field, B = 0.1 Wb/m²

We need to find the magnetic flux through the coil and the emf is induced in the coil after 10⁻³ s.

Magnetic flux is given by :

[tex]\phi =BA\cos\theta\\\\\text{For N turns},\\\phi =NBA\cos\theta \\\\\phi=100\times 0.1\times 0.01\times \cos(70)\\\\=0.034\ Wb[/tex]

So, the magnetic flux through the coil is 0.1 Wb.

Emf induced in the coil is :

[tex]\epsilon=\dfrac{-d\phi}{dt}\\\\=\dfrac{0.034}{10^{-3}}\\\\=34\ V[/tex]

So, 34V of emf is induced in the coil.

Answer:

a) 37.70 m/s

b)710.6 m/s²

Explanation:

Given that ;

Mass of object = 2 kg

Radius of the motion = 2m

Frequency of motion = 3 rev/s

The formula to apply is;

v= 2πrf   where v is linear speed

v = 2×π×2×3 =12π = 37.70 m/s

Centripetal acceleration is given as;

a= 4×π²×r×f²  

a= 4×π²×2×3²

a=710.6 m/s²

Answer:

On the way to the Moon the Apollo astronauts reached a point where the. Moon's gravitational pull became stronger, than the Earth's. (a) Determine the distance of ...

Explanation:

Complete question :

How much power is generated if a person applies 220 N of force to move a bicycle 5m in 10 s?

Answer:

Explanation:

Given that :

Force = 220N

Time = 10 seconds

Distance = 5 m

Power = Workdone / time

Answer:

7.5N

Explanation:

Given parameters:

Mass of the ball  = 0.5kg

Acceleration  = 15m/s²

Unknown:

Force exerted by the kicker = ?

Solution:

To know the force exerted by the kicker, we use the mathematical expression below:

 Force  = mass x acceleration

This is based on Newton's second law of motion;

Now insert the parameters and solve;

  Force  = 0.5 x 15  = 7.5N

Answer:

Kinetic energy is energy of motion

Explanation:

Of potential energy which is energy that is stored

Answer:

A. 1600 kilojoules

Explanation:

Looking at the graph, at 4 meters, we can guess the energy transferred would be around 1500 kilojoules. 1600 kilojoules is the closest to that value, so A would be the best choice.

Answer:

8000Ns

Explanation:

Given parameters:

Mass of the truck  = 1000kg

Initial velocity  = 9m/s

Final velocity  = 17m/s

Unknown:

Impulse  = ?

Solution:

The impulse experienced by the truck is the the change in momentum of the body.

  Impulse  = Ft

        Momentum  = m(v  - u)

        Ft  = m( v - u )

 F is the force

 t is the time

 m is the mass

  v is the final velocity

 u is the initial velocity

     Impulse  = 1000(17 - 9) = 8000Ns

Answer:

548.8 J

Explanation:

Answer:

B. Yes, because they glow more brightly as they increase in

temperature

Explanation:

Did the test !!

The coils in an electric heater blackbody are not radiators. Because, they absorb no energy and emit no light. Thus, the correct option is C.

Electric heating is a process in which the electrical energy is converted directly into the heat energy at around about 100% efficiency, using rather the cheap devices. Common applications which are included are space heating, cooking, water heating and industrial processes.

A radiator is the key component of the engine's cooling system. Radiator has the main role to disperse a mix of antifreeze and water molecules throughout the fins, which releases some of the engine's heat energy while taking in the cool air before continuing to pass the rest of the electric engine.

Therefore, the correct option is C.

Learn more about Electric heater here:

https://brainly.com/question/15629252

#SPJ2

Answer:

Noise does not affect the digital signal, making it more reliable.                               This information is transmitted digitally, making it more reliable

Explanation:

Just did it on Ape.x

This information is transmitted digitally, making it more reliable. Noise does not affect the digital signal, making it more reliable. The correct options are B and D.

The transfer and reception of data in the form of a digital bitstream or a digitized analogue signal transmitted through a point-to-point or point-to-multipoint communication channel is known as data transmission and reception, or, more broadly, data communication or digital communications.

Because digital switching systems are substantially less expensive than analogue switching systems, digital transmission is used to achieve high reliability.

However, the analogue signals that make up the majority of speech, radio, and television must be used for digital transmission.

This information is more dependable because it is conveyed digitally. The digital signal is unaffected by noise, increasing its dependability.

Thus, B and D are the correct options.

For more details regarding digital transmission, visit:

https://brainly.com/question/29393615

#SPJ5

Answer:Total Inductive reactance XL =538.63 Ω

Explanation:

Parallel combination for Effective inductance is calculated as

L total =  [tex]\frac{1}{1/L1 + 1/L2 + ... 1/Ln}[/tex]

=[tex]\frac{1}{1/5 + 1/2}[/tex]

[tex]\frac{1}{0.2 + 0.5 \\}[/tex]

=[tex]\frac{1}{0.7}[/tex]

=1.42857H

Inductive reactance XL = 2 πFL

where f= frequency= 60Hz

L=  Effective inductance=1.42857H

Inductive reactance , XL = 2 X 3.142 X 60 X 1.42857

=538.63Ω

Answer:

See the answer below

Explanation:

To solve this problem we must use the definition of power and work in physics.

a)

The function of the conveyor belt is to carry the boxes from an initial point that is at low altitude to an end point that is at high altitude. In this way the conveyor belt prints a speed to the box to be able to raise it to the required vertical distance.

Since we have a velocity at the beginning and then we place the box at a high position, where then the box remains at rest, we can say that it converts kinetic energy to potential energy.

b)

Power is defined as the relationship of work over time. Therefore we have:

[tex]P=W/t[/tex]

where:

P = power = 3.8 [kW] = 3800 [W]

W = work [J]

t = time = 14 [s]

[tex]W=P*t\\W=3800*14\\W= 53200[J] = 53.2[kJ][/tex]

c)

Since the given time is equal to the given time at Point b, we can use the same work calculated.

We know that work is defined as the product of force by the distance traveled.

[tex]W =F*d[/tex]

So, the force is equal to:

[tex]F=W/d\\F=53200/5.3\\F=10037.73[N][/tex]

Now we know that force is defined as the product of mass by gravitation acceleration.

[tex]F =m*g[/tex]

where:

F = force or weight = 10037.73 [N]

g = gravity acceleration = 9.81 [m/s²]

m = mass [kg]

[tex]m=F/g\\m = 10037.73/9.81\\m = 1023.2 [kg][/tex]

d)

This part can be solved by means of the energy conservation theorem, where the potential energy is transformed into kinetic energy or vice versa.

[tex]E_{pot}=m*g*h = E_{kin}=0.5*m*v^{2}[/tex]

where:

h = elevation = 4.7 [m]

v = velocity [m/s]

[tex]m*g*h=0.5*m*v^{2}\\g*h=0.5*v^{2} \\v=\sqrt{\frac{g*h}{0.5} } \\v=\sqrt{\frac{9.81*4.7}{0.5} } \\v = 9.6 [m/s][/tex]

Answer:

F = G  \frac{2 m^{2} }{r^{2} }

action and reaction forces with the same magnitude, but in the opposite direction, one applied to each body.

Explanation:

The force between the asteroids is given by the law of universal gravitation

           F = G m₁ m₂ / r²

in this case they give us the mass of each asteroid

           m₁ = m

           m₂ = 2m

we substitute

           F = G m 2m / r²

           F = G 2 m² / r²

            [tex]F = G \frac{2 m^{2} }{r^{2} }[/tex]

Let's analyze this expression, this is the force that one asteroid exerts on the other, therefore there are two forces, one applied to each asteroid, as the order of the products does not affect the result, the magnitude of the force is the same on each asteroid.

These are action and reaction forces with the same magnitude, but in the opposite direction, one applied to each body.

Consequently the two asteroid experiences the same magnitude of force

Answer:

The original analog sound waves are perfect but the copy is not because most analog waves have wavelengths that are too long to reproduce in copies

The original digital waves and the copy are perfect because with digital waves no information gets lost in the transfer of data, and there is no additional noise added to the copy.

Analog refers to audio recorded using methods that replicate the original sound waves. Digital audio is recorded by taking samples of the original sound wave at a specified rate.

Explanation:

i dont need $5

i wrote this using information from go ogle and some from brai nly. I hope it helps.

Answer:

0.63 m/s²

Explanation:

Given that

Distance of meteor from earth's surface, r = 2.98R,

where R = radius of the Earth.

The force of the meteor due to the Earth is usually given by

F = GMM(a)/(R + r)² where

F = force exerted

G = gravitational constant

M = Mass of the earth

M(a) = mass of meteor

Remember that F = Ma, so applying that here, we have

acceleration of meteor = GM/(R + r)²

where r = 2.98R so that

acceleration of meteor = GM/(R + 2.98R)²

acceleration of meteor = GM/(3.98R)²

acceleration of meteor = GM / 15.84R²

It should be noted that GM/R² = 10, so

acceleration of meteor = 10/15.84

acceleration of meteor = 0.63 m/s²

Therefore as calculated, the acceleration of the meteor is 0.63 m/s²

This question is incomplete, the complete question is;

Super fine 40-gauge copper wire has a diameter of only 0.080 mm and weighs only 44.5 g/km. Suppose a spool of 40-gauge wire weighs 205 g less after some wire is pulled off to wind a magnet. How could you calculate how much wire was used ?

Answer: length of wire to be used is 4.6067 km

Explanation:

Circular diameter = d mm

Linear mass density of wire = μ g/km

let m be the mass of wire un-winded from spool to wind a magnet.

If M is mass of wire initially

then

Δm = M - m  { which represents decrease of mass }

Also if L rep the length of wire pulled off,

then

Δm = μ × L grams

⇒ L = Δm/μ km

now given that weight Δm = 205 g and length per unit weight μ = 44.5 g/km

we substitute

L = 205 g  / 44.5 g/km

L =  4.6067 km

Therefore length of wire to be used is 4.6067 km

In order to find the formula for net force, multiply both sides by mass.

Newton's second law of motion states that the rate of change of momentum is directly proportional to the force applied.

Given is the acceleration as the ratio of net force and mass.

We can write acceleration as -

a = F[net]/m

If we have to find the formula for net force, we will multiply both sides by mass (m). Therefore -

a x m = (F[net]/m) x m

am = F[net]

or

F[net] = ma

Therefore, in order to find the formula for net force, multiply both sides by mass.

To solve more questions on Force, visit the link below-

https://brainly.com/question/17069586

#SPJ2

Answer:

The car is considered to be speeding

Explanation:

The following data were obtained from the question:

Constant acceleration (a) = 7.4 m/s²

Time (t) = 2.4 s

Speed limit = 15.64 m/s

To know if the car speeding at any point, we shall determine the velocity of the car.

This can be obtained as follow:

Constant acceleration (a) = 7.4 m/s²

Time (t) = 2.4 s

Constant velocity (v) =?

a = v/t

7.4 = v / 2.4

Cross multiply

v = 7.4 × 2.4

v = 17.76 m/s

Thus, the velocity of the car is 17.76 m/s.

Comparing the velocity of the car (i.e 17.76 m/s) with the speed limit (i.e 15.64 m/s), we can see that the velocity of the car is higher than the speed limit. Therefore, the car is considered to be speeding.

Answer:

Ball moves up and down repeatedly on surface because waves consist of successive crests and troughs moving across surface, each crest pushes ball up and each trough allows it to move down.

Explanation:

[tex]\displaystyle v = 5.7735 \ m/s[/tex]

Math

Pre-Algebra

Order of Operations: BPEMDAS

Equality Properties

Physics

SI Units

Energy

Kinetic Energy Formula: [tex]\displaystyle KE = \frac{1}{2} mv^2[/tex]

Step 1: Define

Mass m = 30 kg

Kinetic Energy KE = 500 J

Step 2: Solve for v