The genetic and chemical variety of plant populations is influenced by environmental factors such as soil nutrients, temperature, water availability, and light intensity.
How may the environment impact genetic diversity?Sometimes a gene's DNA sequence or degree of activity is altered by the environment. Both of these effects have the capacity to change the proteins that a gene generates, which then affects traits. Some harmful environmental factors can change the nucleotide sequence of a gene. UV rays, for example, can harm DNA strands.
How is natural selection impacted by environmental factors?Successful competitors have a higher chance of surviving. Individual creatures with specific qualities are more likely to survive under specific environmental conditions than those without these traits.
To know more about natural selection visit:-
https://brainly.com/question/9830102
#SPJ4
Why is torque greatest at 90 degrees?
Torque is defined as the cross product of the force and the distance from the center to the point of application (force = r * F * sin) (theta)
Where is the maximum torque?Keep in mind that at 90 degrees, the torque is at its highest level. Finding the lever arm and multiplying it by the applied force is a useful method for calculating the amount of torque. The distance that separates the force's line of action from its rotational axis is known as the lever arm.
Why does a 90-degree angle matter?Perpendicular describes two straight lines that meet at a 90-degree angle. When it comes to geometric proofs and examining various vertices and angles, perpendicular lines can be used in a variety of ways. They are helpful for making sure things are straight and aligned properly when painting or building.
to know more about torque here:
brainly.com/question/25708791
#SPJ4
draw the standing wave if the tension is quadrupled while the frequency is held constant
The diagram for the standing wave after the tension is quadrupled while the frequency is held constant has been attached and explained below.
We already know that the frequency of a standing wave is given by,
= f = nv/2l
and
= v = [tex]\sqrt{\frac{T}{m} }[/tex]
In the given problem, the frequency of the wave after the tension is quadrupled will be -
= f2 = 2v/2l
= f2 = v/l
= f2 = 1/l [tex]\sqrt{\frac{T}{m} }[/tex]
Now, since we have quadrupled the tension, we have -
= f = 1/l [tex]\sqrt{\frac{4T}{m} }[/tex]
= f = 2(f2)
So, now we know that the final frequency will be of this form(the image has been attached here) and it would look like this if the tension is quadrupled while the frequency is held constant.
Learn more about standing waves on
https://brainly.com/question/1121886?referrer=searchResults
#SPJ4
A ball is thrown upward from the ground with an initial velocity of 2.13 m s-1. How long does the ball take (in millisecond, ms) to reach the maximum height
The time it takes for the ball to reach its maximum height is 745 milliseconds.
What is time?
Time is defined as a scalar quantity that describes the progression of events in the universe. It is often considered to be the fourth dimension of spacetime, along with the three dimensions of space. Time is closely related to the concepts of causality, or the relationship between cause and effect, and is considered to be a fundamental aspect of the physical universe.
To find the time it takes for the ball to reach its maximum height, we need to use the equation:
1/2 * a * t^2 + v * t + d = 0
where a is the acceleration due to gravity (-9.8 m/s^2), t is the time, v is the initial velocity (2.13 m/s), and d is the initial displacement (0 m, since the ball is thrown upward from the ground).
We know that the ball is thrown upward and reaches its maximum height, so it is subject to a constant acceleration due to gravity in the downward direction. Therefore, the acceleration is -9.8 m/s^2.
The time to reach the maximum height can be found by solving the above equation for t.
t = sqrt(-2*d/(a+v))
t = sqrt(-2*0/(-9.8+2.13))
t = sqrt(2*2.13/(9.8-2.13))
t = sqrt(4.26/7.67)
t = sqrt(0.555)
t = 0.745s
To get the time in milliseconds:
t = 0.745s * 1000ms/s = 745 ms
Therefore, the time it takes for the ball to reach its maximum height is 745 milliseconds.
To learn more about time from the given link:
https://brainly.com/question/26046491
#SPJ4
Select the correct answer. Imagine a Carnot engine has a hot reservoir of 680 K and a cold reservoir of 220 K. What is the efficiency of the engine
According to the given statement 67.7% is the efficiency of the engine.
What is efficiency ?A comparison of the energy output and input in a particular system is called efficiency in physics (and frequently in chemistry). Its definition is the proportion of output energy to input energy, which is provided by the equation: To describe energy in the form of heat or power, this equation is frequently utilized.
n = 1 - (QC/QH)
n = efficiency
QC = Cold Reservoir = 220 K
QH = Hot Reservoir = 680 K
n = 1 - (220 ÷ 680)(÷10)
n = 1 - (22 - 68) (2)
n = 1 - (11 ÷ 34 )
n = (34 - 11) ÷ 34
n = 23 ÷ 34
n = 0.676 * 100
n = 67.6
Therefore, 67.6% is the efficiency of the engine.
Learn more about efficiency from the given link.
brainly.com/question/13222283
#SPJ4
Why would a parcel of air rise relative to other air in the atmosphere?
a. A parcel of air will rise if it has a lower density than the surrounding air.
b. A parcel of air will rise if the air in the parcel has a lower mass than the surrounding air.
c. A parcel of air will rise if it has a higher density than the surrounding air.
d. A parcel of air will rise if the air in the parcel has a higher mass than the surrounding air.
A) A parcel of air will rise if it has a lower density than the surrounding air. is the relative order of air in the atmosphere.
In the atmosphere, air moves from high pressure to low pressure areas. When a parcel of air is heated, it expands and becomes less dense than the surrounding air. As a result, the parcel of air rises because it is less dense than the surrounding air, which creates a lower pressure area.
This process is known as convection and is responsible for many weather phenomena such as thunderstorms and cloud formation. In contrast, if a parcel of air cools and becomes more dense, it sinks because it creates a higher pressure area than the surrounding air.
To know more about convection click below:
https://brainly.com/question/4138428#
#SPJ4
which of the following causes low lung compliance as a result of last of electrical lung tissue destruction
Interstitial lung disease is low lung compliance as a result, last of electrical lung tissue destruction.
Interstitial lung disorders brought on by breathing in particles like silicon and asbestos (asbestosis) can cause low lung compliance (silicosis).
Lungs and the pleural cavity have the capacity to expand and contract in response to variations in pressure. Lung compliance, which is a key determinant of lung health and function, is defined as the volume change per unit of pressure change across the lung. Lung compliance varies between inhalation and expiration because measurements of lung volumes vary between the two at the same pressure. Depending on whether only volume and pressure are measured (static) or whether their variations over time are also recorded, lung compliance can be classified as either static or dynamic.
know more about lungs here
https://brainly.com/question/13210870#
#SPJ4
An air puck of mass 0.304 kg is tied to a string and allowed to revolve in a circle of radius 0.44 m on a horizontal, frictionless table. The other end of the string passes through a hole in the center of the table and a mass of 1.15 kg is tied to it. The suspended mass remains in equilibrium while the puck revolves. 0.44 m v 1.15 kg 0.304 kg What is the tension in the string
The tension in the string can be found by using the equation for centripetal force. which is equal to 150.
This equation states that the centripetal force (Fc) is equal to the mass of the object (m) multiplied by the square of the velocity (v) and divided by the radius (r). Therefore,
Fc = m x v²/r.
In this case, the centripetal force is equal to the tension in the string, so the tension in the string (T) can be found by rearranging the centripetal force equation to
T = m x v²/r.
Substituting in the given values for mass (m) and radius (r) gives
T = 0.304 kg x (2.83 m/s)²/0.44 m
T= 150N
Therefore the tension of the string is 150N
Learn more about tension:
https://brainly.com/question/24994188
#SPJ4
figure 2 shows a 7520kg lorry. the driver spots a hazard ahead and applies the brakes. the lorry decelerates uniformly and comes to a stop 50m after the brakes are applied. Estimate the braking force needed to stop the lorry in newtons
Answer:
25 m/s
Explanation:
v^2-u^2=2as
a= (v^2-u^2)
Describe the properties of waves and explain how they can be measured.
Why is a sound wave considered a mechanical wave?
The properties of waves are: wavelength, time period.
Sound wave is considered a mechanical wave because it requires medium to travel.
What is mechanical wave?A mechanical wave is one whose energy cannot be transmitted via a vacuum. To transfer their energy from one place to another, mechanical waves need a medium.
A mechanical wave is something like a sound wave. A vacuum can not be traversed by sound waves.
Units of time and space can be used to measure the fundamental characteristics of waves. The length between wave crests, or wavelength (L), and the time it takes a wave to pass a fixed point, or period (T), are two characteristics that can be measured directly.
Learn more about mechanical wave here:
https://brainly.com/question/3101711
#SPJ1
Which of the following graphs best illustrates how the intensity of sound varies as a detector is moved further and further from a stationary source projecting sound in all directions
The graph that best illustrates how the intensity of sound varies as a detector is moved further and further from a stationary source projecting sound in all directions would be an inverse square law graph. This graph would show that the intensity of sound decreases as the distance from the source increases. The intensity of sound is inversely proportional to the square of the distance from the source.
This means that if the distance from the source is doubled, the intensity of sound is decreased by a factor of four. This relationship is commonly observed in physics and engineering and is known as the inverse square law of sound propagation. This law states that the intensity of sound decreases as the distance from the source increases in a manner that is inversely proportional to the square of the distance.
Read more about wave propagation:
https://brainly.com/question/9349349
#SPJ4
1. What is the
momentum of a 1.5 × 103-kilogram car
as it travels at 30. meters per second due east for 60.
seconds?
A) 4.5 x 104 kg m/s, east
B) 4.5 x 104 kg.m/s, west
C) 4.5 x 106 kg•m, east
D) 4.5 x 106 kg•m, west
A 1.5 x 103 kg car's momentum is equal to 4.5 x 104 kg m/s east if it moves at a speed of 30 m/s for 60 seconds while traveling straight east.
What is momentum ?Momentum is a property of an object or system that describes its tendency to move or stay in motion. It is equal to the product of the mass of the object and its velocity. Momentum is conserved, meaning that the total momentum of an isolated system remains constant, regardless of any changes or interactions within the system. Momentum is an important concept in classical mechanics, and is directly related to forces, energy, and angular momentum. Momentum is an essential factor for describing the behavior of objects in motion.
To learn more momentum
https://brainly.com/question/1042017
#SPJ1
What additional kind of energy makes Cv larger for a diatomic gas than for a monatomic one?
O Charismatic energy
O Translational energy
O Heat energy
O Rotational energy
O Solar energy
Answer:
translational energy
Explanation:
because is diatomic
Answer the questions based on the information given. The Amur plate, a small plate, has moved away from the Eurasian plate. It has moved125,000 meters in 25 million years. It is moving eastward. What is the rate of motion of the Amur plate
The solutions are: The movement is 5 mm per year. The plate is 5,000 meters to the east. The Amur and Eurasian plates would collide, creating an ocean floor.
The rate of motion is in mm per year so you need to convert the distance it has moved to millimeters.
1 meter = 1,000 meters
125,000 will therefore be:
= 125,000 * 1,000
= 125,000,000 millimetersRate of motion = 125,000,000 / 25,000,000 years
= 5 mm/year
The plate is moving east and in 1 million years it would be:
= 1,000,000 * 5 mm/year
= 5,000,000 mm
n meters this is:
= 5,000,000 / 1,000
5,000 meters east
ecause the Amur and the Eurasian plates are moving apart, the ocean would have to fill up the space left which would lead to the development of a new oceanfloor.
Learn more about motion here-
https://brainly.com/question/22810476
#SPJ4
Answer: 5 mm/year, 5000 meters east, new ocean floor
Explanation:
A truck travels due east for a distance of 1.4 km, turns around and goes due west for 7.7 km, and finally turns around again and travels 2.6 km due east. (a) What is the total distance that the truck travels
The total distance that the truck travels is 11.7 km
Part (a)
The algebraic sum of the various distances results in the total distance covered by the trucks.
DT = d1 + d2 + d3
So, total distance that the truck travels = 1.4 + 7.7 + 2.6 = 11.7 km
Part (b) Question is missing :
(b) What are the magnitude (in km) and direction of the truck's displacement? (Enter a number.)
magnitude #? km
direction? east, west or neither.
The quickest route taken by the object to get from one spot to another is called displacement.
As the truck travels in three directions, from east to west to east, it begins out from the east. Think of the east as being good and the west as being negative. As a result, the displacement can be calculated as shown below.
D =d1 - d2 + d3 = 1.4 - 7.7 + 2.6 = 1.4 - 5.1 = -3.7 km
Here, the negative sign shows that the truck has displaced in the west direction.
Learn more about displacement here :
brainly.com/question/11934397
#SPJ4
What did Galileo discover when he dropped two cannon balls into f different weights from the leaning tower of pisa
Answer: The time it took for them to fall ere the same.
Explanation:
The only difference was because of resistance, weight doesn't affect the speed of gravity, the speed of gravity stays the same (9.801 meters per second)
8) An object is attached to a hanging unstretched ideal and massless spring and slowly lowered to its equilibrium position, a distance of 6.4 cm below the starting point. The mass is then pulled so the spring is stretched to a length of 9.6 cm. How fast will the mass be moving when it reaches the equilibrium position?
Work is accomplished by stretching or compressing a spring. Elastic potential energy is stored in the spring. It is recommended to expand the spring up to 12.8 cm.
What happens to the elastic potential energy that is stored in a spring when work is done to extend it?Elastic potential energy is stored in the spring as a result of the work required to stretch or compress it. A spring's elastic potential energy is equal to one-half the sum of its spring constant times its deformation squared.
When a spring is stretched or compressed from its initial resting position, where is the elastic potential energy stored?We'll talk about elastic potential energy as the second type of potential energy. The energy that is trapped in elastic materials as a result of their stretching or compression is known as elastic potential energy.
To know more about spring stretched here:
brainly.com/question/14203117
#SPJ1
Twice each lunar month, all year long, these tides occur. Whenever the moon, earth, and sun are aligned, the gravitational pull of the sun ___ to that of the moon causing ___ tides.
A. Adds ; neap
B. Adds ; maximum
C. Interferes ; neap
D. Interferes ; minimum
i need the answer now so just the answer and not a long explanation would be great ! thanks !
These tides occur twice each lunar month throughout the entire year. When the earth, moon, and sun are all in alignment, neap tides are produced by the sun's gravitational pull amplifying that of the moon.
When the sun and moon are both on the same side of the Earth, what tides occur twice a month?Instead, the phrase refers to the idea of the tide "springing forth." Regardless of the season, spring tides happen twice each lunar month. Neap tides happen when the sun and moon are at right angles to one another, which also happens twice a month.
What are the names of moon tides?The sun, the form of the ocean, and the moon all have an impact on how much or little the tide rises or falls on Earth. Moon tides are the results of the moon's influence on the Earth's tides. The major subject of this article is moon tides.
To learn more about tides visit:
brainly.com/question/9493666
#SPJ4
A mass on the end of a spring undergoes simple harmonic motion. At the instant when the mass is at its equilibrium position, what is its instantaneous velocity?
A.Instantaneous velocity cannot be determined without additional information
B.At equilibrium, its instantaneous velocity is less than its maximum but not zero.
C.At equilibrium, its instantaneous velocity is at maximum
D.At equilibrium, its instantaneous velocity is zero.
At the instant when a mass is at its equilibrium position when undergoing simple harmonic motion, its instantaneous velocity is its maximum.
Therefore the answer is C. At equilibrium, its instantaneous velocity is at maximum
The simple harmonic motion is periodic motion that oscillates around an equilibrium position. At the equilibrium position, the net force on the mass is zero. Therefore, the mass is not accelerating, so its instantaneous acceleration is zero.
The motion is periodic, meaning it repeats itself at regular intervals of time. In the case of a mass on the end of a spring, the spring exerts a force on the mass that acts to bring it back to its equilibrium position. When the mass is at the equilibrium position, the spring force is zero, and the mass is not accelerating. Therefore, the acceleration is maximum at it ends and decreases to zero at equilibrium position.
The instantaneous velocity is zero at the end as it changes direction of motion, though the acceleration is decreasing from end position to equilibrium, velocity is increasing. The instant after equilibrium position, the acceleration is in opposite direction decreasing the velocity till it is zero at the end position.
To know more on SHM
https://brainly.com/question/29183311
#SPJ4
A crate is carried in a pickup truck traveling horizontally at 15.0 m/s. The truck applies the brakes for a distance of 28.7 m while stopping with uniform acceleration. What is the coefficient of static friction between the crate and the truck bed if the crate does not slide
The truck bed and the crate's static coefficient of friction, assuming the crate doesn't slide, is 0.400.
In the event that the container does not slide, what is the coefficient of static friction between the crate and the truck bed?Between the truck bed and the crate, there is 0.64 coefficient of static friction. When the bed is in the position depicted, the truck must move quickly to the right in order to make the crate slide.
The coefficient of static friction can be calculated in what way?The resistive friction force (Fr) divided by the normal or perpendicular pushing force (N) yields the coefficient of friction, which is a numerical value. The formula fr = Fr/N is used to represent it.
To know more about static friction visit:-
https://brainly.com/question/13000653
#SPJ4
During their discussion, Jolon makes several statements about energy. Which statement is correct? O "Energy in a system changes depending on what kind of energy is in the system." O "Energy in a system always switches between kinetic " and potential forms O "Energy in a system can be increased if work is inserted into the system from outside." O "Energy in a system is always constant."
Answer: yes
Explanation:
not to sure
What is the importance of audio or sound in media forms such as film and television?
Sound is important because it engages audiences: it helps deliver information, it increases the production value, it evokes emotional responses.
Why is sound so important in film?In films, sound can have a significant impact. It can help communicate the tale and advance the plot by enveloping the spectator in a strange environment. Sound can also elicit feelings and establish the mood of a movie. The audio of a movie is just as vital as the on-screen images. Audio aids in memory retrieval, improves brain function, and stimulates the brain (Molyneux, 2007). Students can improve their listening abilities by using audio media (especially for language learning). Distance learning is supported by audio media. Audio content facilitates memorising (music, mnemonics, etc). The purpose of sound in film and television is to further the plot of a narrative, documentary, or commercial movie or television show.To learn more about sound refer to:
https://brainly.com/question/30106395
#SPJ4
What is momentum Mcq?
L=rp Angular Momentum the linear momentum p. Moment of momentum is another name for angular momentum.
How do you gain traction?List the object's mass and speed in step one. Convert any values into SI units in step two (kg, m, s). Step 3: To calculate an object's momentum, multiply the object's mass and velocity.
Can there be negative momentum?Momentum can go wrong. As a vector quantity with both magnitude and direction, momentum has both. The sign, positive or negative, in physics serves as a cue as to the direction. Positive amounts normally signify a forward or upward motion, whereas negative quantities typically indicate a backward or downward motion.
to know more about momentum here:
brainly.com/question/24030570
#SPJ4
What is momentum?
Describe a method that can be used to open a tight lid of bottle without damaging it
Answer:
But the safest way to loosen a tight cap may be to run hot water on it so that it expands slightly.
Explanation:
What is Accenture doing for sustainability?
By calculating carbon emissions reduction and sustainability index improvement, the Accenture MyNav Green Cloud Advisor incorporates sustainability when moving client data centers to the cloud.
The availability of computer system resources without the user having to manage them directly is referred to as cloud computing. The network of remote servers located on the internet in this instance aids in the management and storage of the data.
Mynav Green Cloud Advisor is essential since it aids businesses in creating cloud solutions that may be utilized to lower carbon emissions.
As cloud solutions are essential to businesses, Accenture MyNav Green Cloud Advisor integrates sustainability.
reduces the expense of transportationcreates a design that is appropriate and aids the customer in becoming more sustainable.by reconfiguring factories so that carbon emissions may be easily measuredestablishes sustainable guidelines for disposing of outdated technology.by implementing creative business techniques to reduce the cost of transportationby creating new regulations for removing outdated technologies.To learn more about Accenture and sustainability from given link
https://brainly.com/question/24918185
#SPJ4
A system that has a total change in entropy of 675 J/K and has received 243 J of heat energy will be at what temperature?
The required temperature of the system which has a certain entropy change and receives heat energy is 273.36 °C.
Given that,
The change in entropy of the system = 675 J/K
Heat energy = 243 J
Temperature of the system = ?
The temperature of the system is calculated below.
ΔS = ΔH/T
where,
ΔH is the heat energy
ΔS is the change in entropy of the system
T = ΔH/ΔS = 243/675 = 0.36 K
By converting temperature in kelvin to temperature in degrees centigrade, we get,
T = 273 + 0.36 = 273.36 °C
Thus, temperature of the system which has a certain entropy change and receives heat energy is 273.36 °C.
To know more about temperature:
https://brainly.com/question/20940838
#SPJ4
What is the acceleration of a 56 kg object pushed with a force of 800 newtons?
Answer:
The acceleration of an object can be calculated using Newton's second law of motion, which states that the force acting on an object is equal to the mass of the object multiplied by its acceleration. The equation is:
F = ma
where F is the force, m is the mass, and a is the acceleration.
So, if we know the mass of the object (m = 56 kg) and the force acting on it (F = 800 N), we can calculate the acceleration (a) by dividing the force by the mass:
a = F / m
a = 800 N / 56 kg
a = 14.28 m/s^2
So the acceleration is 14.28 m/s^2
is the electron's speed at f greater than, less than, or equal to its speed at i?
O The electron's speed at f is less than its speed at i. O The electron's speed at f is equal to its speed at i. O The electron's speed at f is greater than its speed at i. O There is not enough data to determine the correct answer.
The correct option is B, The electron's speed at f is equal to its speed at i.
Electrons are subatomic particles that are found in atoms. They are the negatively charged particles that orbit the nucleus of the atom, and they have an extremely small mass. Electrons travel at different speeds depending on their energy level. At their lowest energy level, electrons move at an extremely slow speed, about one thousandth of the speed of light. As the electrons gain energy, their speed increases.
In a vacuum, when electrons have the highest energy level, they can travel at a speed of nearly the speed of light, which is around 186,000 miles per second. In a vacuum, the electrons would have the same speed regardless of their mass. Electrons also move slower inside a material, such as a metal, due to the presence of other atoms. Electrons in metals usually move at a speed of about 1/10th the speed of light. This slower speed is due to the electrons having to pass through energy barriers created by the other atoms in the metal. In general, electrons are very fast particles that can travel at speeds up to nearly the speed of light.
To learn more about Electron's speed visit here:
brainly.com/question/14827627
#SPJ4
30 points!
Which statement accurately describes a similarity all planets share?
They lack enough gravity to clear their orbit of debris.
They orbit the satellites of other planets.
They are very close in comparative densities.
They have sufficient gravity to make themselves round.
Statement D. They have sufficient gravity to make themselves round accurately describes a similarity between all planets in terms of this movement and the presence of mass to form such a celestial body.
Why do all planets have gravity and orbit around major celestial bodies?All planets need to have gravity in order to orbit around major celestial bodies, i.e., stars such as in the case of the earth planet or Mars, they orbit around the Sun which is the star of the solar system. The presence of the attractive force of gravity allows planets to move in a cycle across their stars.
Therefore, with this data, we can see that all planets have gravity and orbit around major celestial bodies and thus they can be considered to share the particularity to have a well defined orbit due to the presence of mass.
Learn more about planets and gravity here:
https://brainly.com/question/1286910
#SPJ1
If a ball is rolling with 5 pounds of force, how much force will be needed to stop the ball from rolling and why?
A
It would take 25 pounds of force to stop the ball from rolling because it takes five times as much force to stop as object.
B
It would take 2. 5 pounds of force to stop the ball from rolling because it takes half of the amount of force to stop an object.
C
It would take 10 pounds of force to stop the ball from rolling because it takes double the amount of force to stop an object.
D
It would take 5 pounds of force to stop the ball from rolling because the same amount of force must be used to stop the object
It would take 5 pounds of force, that is equal force, to stop the ball from rolling because the same amount of force must be used to stop the object.
According to Newton's third law of motion, every action which is occurring in nature has an equal as well as an opposite reaction. For instance, if a particular object A happens to exert a force on another object B, then object B will also be exerting an equal as well as an opposite force on object A.
If a particular ball is rolling with 5 pounds of force then the same amount of reaction will be required to bring it to rest. That is, equal force of 5 pounds will be required to stop the ball.
Hence, option D is the correct option.
To know more about force here
https://brainly.com/question/14898506
#SPJ4
How many pennies fit in 40cm diameter circle and how many nickels fit in a 20cm diameter circle?
And I can carry my nickels far more easily than you can your bucket of pen-nies. I would prefer to keep every pen-ny. A 40 inch circle would contain about 2507 pen-nies. About 493 nickels would be in a 20 inch circle.
A circle is a shape made up of all points in a plane that are at a specific distance from the center point.The diameter is the distance along the circle's center that must travel in order to touch two points on its periphery.The size of a circle essentially divides it in two.In can also be said that in order to go around a curve while maintaining a distance from another point then there is a moving point in a plane must follow a specific path.While the radius encircles the circle from edge to edge, the diameter of a circle cuts through the center.To know more about Diameter here
https://brainly.com/question/23220731
#SPJ4