Factors that affect the strength of electromagnets are the nature of the core material, strength of the current passing through the core, the number of turns of wire on the core and the shape and size of the core.
Answer:
an effect could be that the battery could be running out of juice or that there isnt enough wire on a nail on the electromagnet.
Explanation:
What is the enrgy change when the temperature of 14.4 grams of solid alumnum is decreased from 39.5°C to 23.0°C?
Answer:
[tex]Q=-213.84J[/tex]
Explanation:
Hello!
In this case, since energy involved when a substance undergoes a temperature change due to heat addition or removal is computed as shown below:
[tex]Q=mC\Delta T[/tex]
As the aluminum has a specific heat of 0.900 J/g°C and 14.4 g underwent such temperature decrease, the energy change is:
[tex]Q=14.4g*0.900\frac{J}{g\°C}(23.0\°C-39.5\°C)\\\\Q=-213.84J[/tex]
Which is an outlet energy flow.
Best regards!
The compound F20 has two lone pairs on the central oxygen atom. What's the structure of an F2O molecule? Is this compound polar or non-polar?
A. Trigonal planar, polar
B. Bent or angular non-polar
C. Bent or angular polar
D. Trigonal planar non-polar
Answer:
Bent or Angular, Polar
Explanation:
I just took the test!
Answer:
C. Bent or angular polar
Explanation:
According to the atomic model for matter when atoms are heated they move faster. This causes the rate of reaction to change because the atoms
become larger.
have a better chance of colliding with other atoms.
multiply.
stop moving.
B.) have a better chance of colliding with other atoms.
Of the following compounds, which has the strongest dipole?
Select one:
O a. CCl4
O b. SiO2
OC. PC13
O d. H₂O
O e. Brci
Answer: D.) H₂O
Explanation:
It can't be A because the molecular geometry is tetrahedral and all the bonding atoms are the same and evenly dispersed, cancels out all dipoles.Can't be B because the molecular geometry is linear and bonding atoms are the same. Therefore the bond dipole cancel out.Can't be C because the molecular geometry is trigonal planar and all the bonding atoms are the same. Therefore all the bond dipoles cancel out.Can't be E because while there is a dipole, it is not as large as the dipole created by an Oxygen Hydrogen bond like the one found in H₂O.what is the correct equation for water gas
Answer:
Water-gas A mixture of carbon monoxide (CO) and hydrogen (H2) produced by passing steam over red-hot coke using the endothermic reaction C + H2O # CO + H2.
Explanation:
A solution is made by adding 5.01 g of iron sulfate to 75.3 g of water. What is the mass percentage of iron sulfate in this solution?
Answer:
6.24 % of FeSO₄
Explanation:
Solute mass: 5.01 g of FeSO₄
Solvent mass: 75.3 g of water
Solution mass = solute mass + solvent mass
5.01 g + 75.3 g = 80.31 g
We can apply a rule of three. Mass percentage means the mass of solute which is contained in 100 g of solution. Then,
In 80.31 g of solution we have 5.01 g of solute
In 100 g solution, we may have (5.01 . 100)/ 80.31 = 6.24 g of solute.
This is the mass percentage: 6.24%
what is the potentual energy of 7 kg object, 12 m off the ground?
Answer:
823.2 J
Explanation:
PE = mgh
= (7 kg) (9.8 m/s^2) (12 m)
= 823.2 J
Answer:
Required Answer:-Mass=m=7kg
Height=h=12m
Gravitational force=g=10m/s^2
As we know that[tex]{\boxed{\sf Potential\:energy{}_{(P.E)}=mgh}}[/tex]
Substitute the values[tex]{:}\longmapsto [/tex][tex]\sf P.E=7×12×10 [/tex]
[tex]{:}\longmapsto [/tex][tex]\sf P.E=84×10[/tex]
[tex]{:}\longmapsto [/tex][tex]\sf Potential\:energy=840Joule [/tex]
Calcium is an element. What is the smallest particle of calcium that has the same chemical properties of calcium?
A. an atom of calcium
B. a proton from a calcium atom
C. an electron from a calcium atom
D. a molecule that contains calcium
Answer:
A. An Atom
Explanation:
An atom is the smallest particle of an element, having the same chemical properties as the bulk element.
An atom of calcium is the smallest particle of calcium that has the same chemical properties of calcium.
What is an atom ?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/13654549
#SPJ2
What type of reaction is Cl2+2NaBr=NaCl+Br2
Answer:
Displacement reaction
A yellow line occurs at 572.8 nm in the emission spectrum of phosphorus. What amount of energy, in joules, must be released by an electron in a phosphorus atom to produce a photon of this light?
Answer:
3.47 × 10⁻¹⁹ J
Explanation:
A yellow line occurs at 572.8 nm in the emission spectrum of phosphorus. When an electron undergoes this process, it requires an amount of energy to produce a photon of this light. We can calculate the energy (E) using the following expression.
E = h × c/λ
where,
h: Planck's constant (6.63 × 10⁻³⁴ J.s)c: speed of light (3.00 × 10⁸ m/s)λ: wavelength (572.8 nm = 5.728 × 10⁻⁷ m)E = 6.63 × 10⁻³⁴ J.s × 3.00 × 10⁸ m/s/5.728 × 10⁻⁷ m
E = 3.47 × 10⁻¹⁹ J
Calculate the mass in grams of 0.0035 mol of NaNO3
Answer:
The Mass in Grams= 0.5145
Explanation:
The atomic mass of Na=23
The atomic mass of No3= 62
we multiply 0.0035×((23×1)+(62×2)) = 0.5145 grams
Which of the following is composed of elements combined in a specific ratio?
Answer:
compound
Explanation:
The equation 2NaNO3 + CaCl2 - 2NaCl + Ca(NO3)2 is balanced. How many atoms
of sodium (Na) are there on either side of the equation?
one
two
four
six
Answer:3
Explanation:
I took the test
the correct answer is two
A scientist is measuring how quickly different liquids flow
down a ramp. She notices that water flows more easily
than dish soap.
Which property of water is the scientist observing?
A. Viscosity
B. Compression
C. Crystalline structure
D. Surface tension

Answer:
I think its A
Explanation:
Hope this helps ;)
10. For each of the following pairs of ionic compounds, state which would be expected to have the higher (more negative) lattice energy.
a. LiF or KBr
b. NaCl or MgS
c. MgO or RbI
Answer:
C I belive
Explanation:
The higher lattice energy in option a is for LiF. Similarly, MgS have higher lattice energy that NaCl and MgO have higher lattice energy than RbI.
What is lattice energy?Lattice energy of a compound is the energy required to convert one mole of that compound into its constituent gaseous ions. Lattice energy increases as the size of the ion decreases. As well as, higher the charge of the ions higher will be the lattice energy.
In LiF and KBr, Li and F are the smaller ions and is having higher lattice energy. In the case of NaCl and MgS, Mg and S are having +2 charge and are smaller causes MgO higher in lattice energy.
Similarly in the case of MgO and RbI the same concept can be applied. Rb⁺ and I⁻ are bigger ions where as Mg²⁺ and O²⁻ are comparatively smaller and have higher charge result in higher lattice energy.
Thus compound which have higher lattice energy in option a is LiF, in option b is MgS and in option C is MgO.
To learn more about lattice energy, refer the link below:
https://brainly.com/question/17011733
#SPJ2
Titration of a strong acid with a strong base. The pH curve for titration of 50.0 mL of a 0.100 M solution of hydrochloric acid with a 0.100 M solution of NaOH(aq). What volume of NaOH(aq) would be needed to reach the equivalence point if the concentration of the added base were 0.240 M?
Answer:
Explanation:
we know that M1V1=M2V2
M1=0.100 M
V1=50.0*10^-3 L
M2=0.100 M
V2=M1V1/M2
V2=0.100*50.0*10^-3/0.100
V2=0.05
To know the end point we use phenolphthalein as indicator. End point is a point where completion of reaction happen. The volume of NaOH needed to reach the equivalence point if the concentration of the added base were 0.240 M is 20.8ml.
What is titration?Titration is a technique by which we know the concentration of unknown solution using titration of this solution with solution whose concentration is known.
The balanced equation is
HCl+NaOH[tex]\rightarrow[/tex]NaCl+H₂O
Using following equation
M₁×V₁=M₂×V₂
Where,
M₁=molarity of HCl= 0.100 M
V₁=volume of HCl=50.0 mL
M₂=molarity of NaOH=0.240 M
V₂=volume of NaOH=?
Substituting the given values
0.100 M ×50.0 mL=0.240 M×V₂
V₂=20.8ml
Therefore, the volume of NaOH needed to reach the equivalence point if the concentration of the added base were 0.240 M is 20.8ml.
To know more about titration, here:
https://brainly.com/question/13307013
#SPJ5
In chemical reaction atoms are what?
Answer:
In chemical reaction atoms are reactants11. Which branch of chemistry is concerned with the behavior of substances?
Biochemistry
Physical
Inorganic
O Organic
Answer:
Physical
Explanation:
A) A solution of c6h2o4 in c2h5oh has a boiling point of 80.38 Celsius. what is the molality of the solution ?
B) what is the approximation of concentration of dissolved solution in blood, if the osmotic pressure is 7.65 atm at 37Celsius.
a. molality-m=1.623
b. molarity-M=0.3
Further explanationa. Boiling point
[tex]\tt \Delta Tb=Kb\times m[/tex]
Kb for ethanol=1.22 °C/m
Boiling point for ethanol = 78.4 °C
ΔTb=80.38-78.4=1.98
[tex]\tt 1.98=1.22\times m\\\\m=\dfrac{1.98}{1.22}=1.623[/tex]
b. osmotic pressure
[tex]\tt \pi =MRT[/tex]
π = 7.65 atm
R = 0.08205 L/atm K
T = 37 + 273 = 310 K
[tex]\tt M=\dfrac{\pi}{RT}=\dfrac{7.65}{0.08205\times 310}=0.3~M[/tex]
The diagram illustrates the water cycle.
Parts of the water cycle labeled U through Z. U: Water moving from a lake into the clouds. V: Clouds. W: Water falling from clouds as rain and snow. X: Water moving from ground to the clouds. Y: Water flowing down the mountainside into a lake. Z: Underground water going into lake.
Which process occurs at location W?
precipitation
evaporation
condensation
transpiration
Answer:
Precipitation
Explanation:
In the water cycle, water experiences different phase changes from one state to another in nature.
The cycling affords water to in solid, liquid and the vapor form.
From the cycle show, W represents precipitation.
During precipitation, water in the atmosphere begins to fall. U is evaporationX is transpiration. V is the condensation.Answer:
precipitation
Explanation:
What is the new concentration of 25.0mL added to 125.0mL of 0.150M
Answer:
The new concentration is 0.125 M.
Explanation:
Given data:
Initial volume V₁ = 125.0 mL
Initial molarity M₁ = 0.150 M
New volume V₂ = 25 mL +125 mL = 150 mL
New concentration M₂ = ?
Solution:
M₁V₁ = M₂V₂
0.150 M × 125 mL = M₂ × 150 mL
M₂ = 0.150 M × 125 mL / 150mL
M₂ = 18.75 M.mL/150 mL
M₂ = 0.125 M
The new concentration is 0.125 M.
what are atoms made up of
Answer:
They are made up of electrons, neutrons and protons
Explanation:
Convert the speed of light, 3.0 x 10^8 m/s, into mi/hr. (1610 m = 1 mi). Could you please explain step by step thank you!
Answer:
[tex]v=6.7\times 10^9\ mi/hr[/tex]
Explanation:
Given that,
The speed of light is 3×10⁸ m/s
We need to convert it into mi/hr.
Since, 1 mile = 1610 m
1 hour = 3600 s
So,
[tex]v=3\times 10^8\ \dfrac{m}{s}\\\\=3\times 10^8\ \dfrac{\dfrac{1}{1610}\ \text{miles}}{\dfrac{1}{3600}\ s}\\\\=6.7\times 10^9\ mi/hr[/tex]
So, the required speed of light is [tex]6.7\times 10^9\ mi/hr[/tex].
Which statement is true of an endothermic reaction? a) Weak bonds break and strong bonds form. b) Strong bonds break and weak bonds form. c) The bonds that break and those that form are of approximately the same strength.
Answer:
B
Explanation:
In an endothermic reaction, strong bonds break and weak bonds form.
The density of krypton gas at 1.35 atm and 54.1°C is ________ g/L.
a. 4.21
b. 0.304
c. 8.42
d. 0.0503
e. 0.237
a.
Explanation: I saw it on another website.
find the percent yield,if 6.0g of Licl are actually produced and the theoretical yield is 35.4g of Licl.
Answer:
Percent yield = 17%
Explanation:
Given data:
Actual yield of lithium chloride = 6.0 g
Theoretical yield of lithium chloride = 35.4 g
Percent yield = ?
Solution:
Formula:
Percent yield = (actual yield / theoretical yield )× 100
Now we will put the values in formula.
Percent yield = (6.0 g/ 35.4 g)× 100
Percent yield = 0.17 × 100
Percent yield = 17%
Which group of organisms is an example of a population?
Answer:Leopard Frogs all together in a stream
Explanation:
Vitamin C contains the elements C, H, and O. It is known to contain 40.9% C and 4.58% H by mass. The molar mass of vitamin C has been found to be about 180 g/mol. The molecular formula for vitamin C is _________
Answer:
C₆H₈O₆
Explanation:
First off, the percent of oxygen by mass of vitamin C is:
100 - (40.9+4.58) = 54.52 %Assume we have one mol of vitamin C. Then we would have 180 grams, of which:
180 * 40.9/100 = 73.62 grams are of Carbon180 * 4.58/100 = 8.224 grams are of Hydrogen180 * 54.52/100 = 98.136 grams are of OxygenNow we convert each of those masses to moles, using the elements' respective atomic mass:
C ⇒ 73.62 g ÷ 12 g/mol = 6.135 mol C ≅ 6 mol CH ⇒ 8.224 g ÷ 1 g/mol = 8.224 mol H ≅ 8 mol HO ⇒ 98.136 g ÷ 16 g/mol = 6.134 mol O ≅ 6 mol OSo the molecular formula for vitamin C is C₆H₈O₆
is the second one or the fourth one?
Answer:
D. Light waves travel fastest through a vaccumm
Explanation:
"In a vacuum , light waves move their fastest: 186,000 miles per second (300,000 kilometers per second). This is also the fastest that anything in the universe moves. But when light waves move through air, water or glass, they slow down."
Please mark me as brainliest! <3
Hopefully I could help! Good luck.
An observation that deals with numbers is a(n)
A. Prediction
B. Quantitive observation
C. Evaluation
D. Qualitative observation
Answer:
B (Quantitative)
Explanation:
a clever way to remember the difference between quantitative and qualitative is that there is a n in quantitative which is the first letter to the word number. So quantitative is an oberservation with numbers