Answer:
logic gate
Explanation:
took the test lol
What is a segmentation?
Answer:
Segmentation means to divide the marketplace into parts, or segments, which are definable, accessible, actionable, and profitable
Give short introduction of profession and make a list of its types.
Write a program that can add, Subtract, multiply and divide entered numbers.
In Python:
def add(x, y):
return x + y
def subtract(x, y):
return x - y
def multiply(x, y):
return x * y
def divide(x, y):
return x / y
Please answer the following question in Verilog.
To test our functions we will generate a 3-bit vector that counts up by one every cycle which we will use as the inputs to the decoder. The decoder output will then be fed into the inputs of the encoder to produce an inverted version of the original 3-bit test vector. For every input vector you should toggle the enable signal to both the encoder and decoder function which can be easily done by using the clock waveform used to determine when to increment the input vector as the enable signal as well.
Answer:
345678909 my number
Explanation:
In order to get the maximum functionality out of a device that is plugged in, a user should download the specific ___ for that device.
What kind of loop repeats until something else (determined by the program) happens?
iterative number loop
condition-controlled loop
count-controlled loop
forever loop
Answer:
The Condition-controlled loop
Explanation: Because its called a Condition and it does not stop untill something happens thats why its called "condition".
Answer: It's Condition-controlled loop
Explanation: The meaning of condition-controlled loop is Blocks will keep repeating until a condition is satisfed, Also beacuse I already did the quiz.
Hey all! How would you write write this code?
Write a C++ program using variables and loops in order to implement the Hi-Low strategy of card counting and keep a running count. The Hi-Low strategy of card counting assigns one of three values to a card, based on its face value. The table below breaks down these values. FACE VALUE ASSIGNEDVALUE 2, 3, 4, 5, 6 +1 7, 8, 9 0 10, J, Q, K, A -1 In a typical game of Blackjack, a card counter will start with a fresh deck and a count of 0. Each time a card is played, its assigned value is added (or subtracted) from what is known as the running count. The running count rolls over from hand to hand. For instance, if the first 7 cards of a game were: Queen, Jack, 4, 6, 7, Jack, 9, then the running count would be (0) -1 -1 + 1 + 1 + 0 –1 + 0 =-1
The program is an illustration of loops.
Loops are used to perform repetitive actions.
The program in C++ where comments are used to explain each line, is as follows:
#include <string>
#include <iostream>
using namespace std;
int main(){
//This declares all variables
int n, count = 0; string k;
//This gets input for the number of cards
cin>>n;
//The following is repeated n-times
for(int i = 0;i <n;i++){
//This gets input for the current card value
cin>>k;
//If the card is a digit
if(isdigit(k[0])){
//This checks if the card number is between 2 and 6 (inclusive)
if(stoi(k) >= 2 && stoi(k) <= 6){
//If yes the face value is increased by 1
count+=1;
}
//This checks if the card number is 10
else if(stoi(k) == 10){
//If yes the face value is decreased by 1
count-=1;
}
}
//This checks if the card number is J, Q, K or A
else if (k == "J" || k == "Q" || k == "K" || k == "A") {
//If yes the face value is decreased by 1
count-=1;
}
}
//This prints the face value
cout<<count;
return 0;
}
At the end of the program, the face value is printed.
Read more about similar programs at:
https://brainly.com/question/24578223
Which of the following expressions in Java is equal to 4?
3% 7
7 % 3
17 % 7
11 % 7
28 % 7
Answer:
3% 7
Explanation:
because 7 because seven ate nine and three was lonely so seven decided to also eat three and became a lesser number somehow because three apparently was not as big as the number 9 so maybe eating three caused him to go down to 4
The expression "11 % 7" in Java is equal to 4.
The "%" operator calculates the remainder of a division operation.
In Java, the "%" operator is used to calculate the remainder of a division operation.
So, let's evaluate each expression and see which ones equal 4:
3 % 7 = 3 (remainder of dividing 3 by 7)
7 % 3 = 1 (remainder of dividing 7 by 3)
17 % 7 = 3 (remainder of dividing 17 by 7)
11 % 7 = 4 (remainder of dividing 11 by 7)
28 % 7 = 0 (remainder of dividing 28 by 7)
Based on these evaluations, the expression "11 % 7" is equal to 4.
To learn more about programming visit:
https://brainly.com/question/14368396
#SPJ3
A field name can be up to 64 characters long
Answer:
Explanation:
cool ..........................,...............................
IT professionals ensure servers connected to the network operate properly. (2 points) True False
Answer:
True
Explanation:
Thats one of their most important jobs
ctivity 2: irections: Convert the given value to unit asked. 1. 1 tb 2. 500 mb 3. 200 kb 4. 1,000,000 bytes 5. 500 gb mb gb byte gb mb
help please
Answer:elab
Explanation:
1. The jargon for navigating on the Internet is called: A. surfing B. selecting C. clicking D. analyzing
Answer:
A. surfing
Explanation:
Browsing the internet is known as surfing the internet.
What are the data type(s) will be used to declare the variable(s) needed to
create the algorithm?*
1.. integer only
2.. real only
3..integer and real
4..real and string
In which of these images would lines become an evaluating factor?
Answer: The fish?
Explanation:
Answer:
birds in flight and railroad tracks
Explanation:
i got it right
ACTIVITY NI MATCHING TYPE Directions: Match Column A with Column B. Write the letter of the correct answer on the space provided before the number a. Trion your nails b. visits the dentist c. scrub your hands with soap and water d. wear deodorant taking a bath 18111411 hely wear suitable clothes at work g. avoidis open wounds while working with food h. Regularly out your hair. 1. Use a seperate towel or cloth wiping hands. . keep sanitizer. 10.
Answer:
Mark me a brainless plss i need that i am blink plss
List the steps you would take to create folders/directories in different operating system environments.
In Linux we use the terminal to create files and folders.
To create a folder:
1. Open a terminal
2. Go to a directory where you want to create the folder
3. Use the change directory command to go to the directory.
4. Use the mkdir command to make a folder
To create a file:
1. Open a terminal
2. Go to a directory where you want to create a file.
3. use the touch command followed by the filename.
Example to create a directory:
mkdir foldername
Example to create a file:
touch file.txt
Answer:
Various operating systems have different ways of creating folders or directories. Here are steps to create folders or directories in some of the most common operating systems.
Windows
You can create a new folder in Windows by following the two different ways stated below.
These are the steps for creating a new folder through using the File menu.
Open the location where you want to create the new folder.
Then, select the File menu and click New.
Finally, select the Folder option.
These are the steps to create a folder using the right-click method.
Open any location where you want to save your new folder.
Right-click on any blank area of the screen.
This opens a menu. Select New from the menu.
Lastly, from the menu that opens after you select New, and click Folder.
MS-DOS
These are the steps to create directories in MS-DOS.
Click the Start menu.
Click All Programs and then select on Accessories.
Then, select Command Prompt.
Navigate to the location you want to save your new folder. For example, if you want to open the C drive, the command will be: C:
To create a new directory, type mkdir followed by the folder name of your choice. For example, if I want a folder named projects, I will enter the command, “mkdir projects”.
To create multiple new directories in the newly created directed directory, you can use the md MS-DOS command. For example, if you want to make sub-directories named project1, project2, and project three, your command will be md project1 project2 project3.
Mac OS X
There are three ways to create a new folder in the MAC OS X
These are the steps for creating a new folder through using the File menu.
Open any location where you want to save your new folder.
Afterwards, select the File menu and click New Folder
These are the steps to create a folder using the right-click method.
Open any location where you want to save your new folder.
Right-click on any blank area of the screen.
This option opens the folder menu. Select New Folder from the menu.
These are the steps to create directories in Terminal.
Open the Utilities folder. Start the Terminal program.
Navigate to the location where you want to save your new folder.
To create a new directory, type mkdir followed by the folder name of your choice. For example, if I want a folder named projects, I will enter the command, “mkdir projects”.
To create multiple new directories in the newly created directed directory, you can use the -p Terminal command. For example, if you want to make sub-directories named project1, project2, and project three, your command will be -p project1/project2/project3.
Linux
There two ways of creating a new folder in Linux.
These are the steps for creating a new folder using the right-click method.
First, open the file manager.
Then, proceed to the location where you want to save your new folder.
Next, right-click on a blank spot.
Finally, select Create New Folder from the drop down menu.
These are the steps for creating a new folder using Terminal.
Open Terminal by using the Ctrl+Alt+T combination of keys.
To create a new directory, type mkdir followed by the folder name of your choice. For example, if I want a folder named projects, I will enter the command, “mkdir projects”.
To create multiple new directories in the newly created directed directory, you can use the -p Terminal command. For example, if you want to make sub-directories named project1, project2, and project three, your command will be -p project1/project2/project3.
Explanation:
for plato
You should move around and take a rest for 30 minutes every 5 minutes.
True Or False
Answer:
obviously true.........
Question
What protocol is used to discover the hardware address of a node with a certain IP address?
Answer:
ARP is a simple query–response packet protocol used to match workstations hardware addresses to IP addresses. In other words, ARP is the protocol used to identify nodes in a LAN. ARP is described in RFC 826
Complete the following sentences by either filling in the blank or writing out the rest of the sentence (when there is a … ):
The internet is made up of _________ networks that all connect together to make a ____________ network.
The job of a router on the internet is to…
Clients allow people to…
Servers store _____________________ and send those to _____________ over the internet.
The internet is physically connected across the world using _______________
Computers break up information, like photos and emails, into ________________
The ___________ protocol tells computers how to break up the information and orders it.
The ________________ protocol tells the packets where they are going and where they are coming from.
The packets get to their destination by…
When the packets get to their destination, the __________ protocol…
Computers get the _______________ of servers by asking the ______________
Computers use the _____________ protocol to display a webpage.
Answer
hundreds, massive, connect to the internet gigabytes, people, computers,
bytes, TCP/IP, TCP, internet, TCP, answers, questions, HTTP
Explanation:
explain how communication in fuses management efficiency
Explanation:
Effective communication is pivotal in increasing productivity because it directly influences the behavior of the staff and the way they perform. ... That is why it is essential that you practice communicating with your staff. It will improve understanding and, in the result, will elevate productivity and efficiency.
phân tích cạnh tranh của cocacola và pepsi
Which of the following factors is most likely to result in low shipping and handling costs? A higher than average hourly pay rate for material handlers A rare but high-in-demand packaging material A promotion for free shipping on orders over a predetermined order total All of the above
Answer: A higher than average hourly pay rate for material handlers
Explanation:
Shipping and handling cost describes costs related to the total cost of an ordered item which are included in the fees used to deliver the item to the buyer. Hence, the correct option is C
Shipping and handling cost usually depend on the size of the item, the buyer's location and fragility of the item purchased.
From the options given, handling and shipping fee may be reduced as a result of free promotional shipping on orders.
Handler and drivers who are paid above average will result in increased shipping fee and rare in-demand items won't come cheap either.
Hence, low shipping fee will most likely be as a result of promotion for free shipping on orders over a predetermined order total.
Learn more : https://brainly.com/question/20533392
does industry-recognized certifications (microsoft office suite) boost your resume and
increase your earning potential?
Answer:Having Microsoft Office training can make you more productive, confident, and satisfied with your job. ... Productivity is crucial to success in the administrative assisting field, and your employers will thank you for it. 3. Industry-recognized certification will boost your resume and increase your earning potential.
Explanation: i no it
When you use a library in your code, how do you give attribution?
When you use a library in your code, you give attribution: by writing the source, title, author and license in your code.
Attribution can be defined as a process which typically involves the citation (reference) of an original source of information such as a library, quote, paraphrase or summary, especially by using the author's full name, source, and job title (position) as the case may be.
In software development, you give attribution when you use a library in your code by writing the following:
The source in your code.The title in your code.The author in your code.The license in your code.Read more: https://brainly.com/question/21172316
A reference is _____.
Answer:
a written or spoken comment that mentions somebody/something
Identify the following verb by number and person by checking on the appropriate boxes.
SHE WANTS!!
second person
singular
plural
same form for both singular and plural
third person
first person PLEASE HELP!!!!!! LAUNGUAGE ARTS
Answer:
Singular and third person
Explanation:
Second person: this answer is not correct as second person refers to pronouns such as “you, yourself” like in a recipe.
Singular: this is correct as a singular verb is when there is only one subject. You can also tell it’s a singular verb as the present tense ends with a “s”.
Plural: this is not plural because there is only one subject. Plus the present tense of the verb ends with an s so it’s not a plural verb. Plural verb’s present tense never ends with an s.
Third person: this is correct because the subject of the sentence is someone else. Third person pronouns include: “her, she, he, him, they, then” basically, third person is when you talk about someone else.
First person: this answer is not correct because first person refers to one’s self. So first person pronouns are: “I, me, myself”
What is printed when the following code has been executed?
int x = 15;
int y = 4;
System.out.println((2 * x + y) % x);
15
4
34
2
19
CPU is also called RAM.
True or false.
Answer:
False
Explanation:
RAM works in conjunction with the central processing unit (CPU). If RAM is the temporary memory, you can think of the CPU as the brain of the computer. The CPU chip retrieves data from the RAM
FALSE ...
BECAUSE RAM IS A MEMORY AND CPU IS A UNIT OF COMPUTER THAT'S WHY IT IS FALSE
Language is Python
9.9 LAB: Count input length without spaces, periods, exclamation points, or commas
Given a line of text as input, output the number of characters excluding spaces, periods, exclamation points, or commas.
Ex: If the input is:
Listen, Mr. Jones, calm down.
the output is:
21
Answer:
text = input('Please enter a line of text')
text = text.replace(" ", "")
text = text.replace(".", "")
text = text.replace("!", "")
text = text.replace(",", "")
print(len(text))
Explanation:
i answered this same exact question the other day.
line by line, the first line asks for input with a prompt.
the second line replaces spaces, the next one replaces periods, the next exclamation marks, the next commas. then the last line prints the total number of characters
In this exercise we have to use the computer language knowledge in python to write the code as:
the code is in the attached image.
In a more easy way we have that the code will be:
text = input('Please enter a line of text')
text = text.replace(" ", "")
text = text.replace(".", "")
text = text.replace("!", "")
text = text.replace(",", "")
print(len(text))
See more about python at brainly.com/question/26104476
what are the components of computer system??
Answer:
1. A motherboard.
2. A Central Processing Unit (CPU)
3. A Graphics Processing Unit (GPU), also known as a video card.
4. Random Access Memory (RAM), also known as volatile memory.
5. Storage: Solid State Drive (SSD) or Hard Disk Drive (HDD)
(Please give me brainliest)