A majority of the an organization's overall ghgs (GHG) emissions frequently come from scope 3 emissions, also known as value chain emissions.Although not every class will be applicable to all enterprises, the GHG Protocol lists 15 types of scope 3 emissions.
What makes Scope 3 crucial?In many industries (and more than 90% in many global corporations, according to CDP reporting), scope 3 emissions, also known as "Value Chain emissions," make up the bulk of total emissions. These emissions are regarded as essential to combating climate change.
What targets are in scope 3?Scope 3 emission are indirect emission of greenhouse gases that are produced in the larger economy in addition to scope 2 emissions.They result from a facility's operations, but they come from sources that the facility's operations do not own or control.
To know more about scope 3 visit:
https://brainly.com/question/29546969
#SPJ4
Copy and paste or type your submission right here. HTML Editor X BIVA -A- IX E EDO V E - Paragraph 12pt Predict what would happen if during an accident the periosteum and the muscle were removed from a side of a long bone that is broken. Describe the advantages and disadvantages of fusing vertebrae.
The removal of the periosteum causes shock, distress, tissue damage, and skin puncture. The fusing of vertebrae increases the stability, strength, and shape of the spine. But it will add stress and increase the rate of spine degradation.
The periosteum is the covering that surrounds the bones and supplies the bone with blood, nerves, and cells they require to develop and heal. The bone receives nutrients and sensations from this.
If the periosteum and the muscle are removed because of the accident, it will cause distress and severe shock. Because the nerve in this is helpful in the sensation of pain caused by tissue damage. So when this periosteum is removed, the lack of sensation will limit the regeneration of osteoblasts.
The muscle surrounding will also affect balance, and stability. Also, cause more damage or skin puncture.
Advantages:
Fusing vertebrae helps to eliminate and remove the segmentation in the vertebral column. It helps to restore, strengthen, and stabilize the shape of the spinal cord. It also corrects deformity and reduces pain.Disadvantages:
Extra stress will be placed on the vertebrae above and below the fused part. Additionally, it speeds up the degeneration of the spine. Regional segmental mobility is also altered.To know more about periosteum:
https://brainly.com/question/1408966
#SPJ4
Why is communication an important part of the scientific process
Answer:
Communication is a vital component to the scientific process. It helps the scientist, if he/she was making an invention, tell people or get advice about the project, which couldn't be done without communication. Scientists need to communicate to learn, get advice, and collaborate with one another.
The sensation of color is seen when light falls on the eye's
a) both of these
b) rods
c) cones
d) neither of these
The sensation of colour is seen when light falls on the eye's cones.
The retina, a component of the eye, is what detects light entering our eyes. The pupil is the black hole in the centre of the eye that lets the light into the eye.
Light-sensitive cells can be found in the retina of the eye. It contains two kinds of cells known as rods and cones. Cones are the cells of retina that produce colour sensation. These photoreceptor cells are responsible for colour vision.
Rod cells are photoreceptor cells in the retina that function in dim light better than the other type of visual photoreceptor, cone cells.
Rods are employed in peripheral vision and are often clustered at the borders of the retina.
To know more about eye:
https://brainly.com/question/1536544
#SPJ4
a worker drives a .500 kg spike into a rail tie with a 2.50 kg sledgehammer. the hammer hits the spike with a speed of 65 m/s. if one third of the hammers kinetic energy is converted to the internal energy of the hammer and spike how much does the total internal energy increase?
dang, someone help me and explain this pleasseeee!!
Answer:
Explanation:
To find the increase in total internal energy, we first need to find the kinetic energy of the sledgehammer before it hits the spike. We can use the formula:
KE = (1/2) * m * v^2
where KE is the kinetic energy, m is the mass, and v is the velocity.
Plugging in the values, we get:
KE = (1/2) * 2.50 kg * (65 m/s)^2
KE = (1/2) * 2.50 kg * 4225 m^2/s^2
KE = 5212.5 J
Next, we need to find the amount of energy that is converted to internal energy. Since one third of the kinetic energy is converted to internal energy, we can multiply the kinetic energy by 1/3 to find this value:
E = 1/3 * 5212.5 J
E = 1737.5 J
Finally, we need to find the total internal energy increase by adding the energy converted to internal energy to the initial internal energy of the hammer and spike. Since the initial internal energy is zero, the total internal energy increase is simply the energy converted to internal energy:
Total internal energy increase = 1737.5 J
Therefore, the total internal energy increases by 1737.5 J when the sledgehammer hits the spike.
1 Fig. 3.1 shows an oil tank that has a rectangular base of dimensions 2.4 m by 1.5m.
Fig. 3.1
The tank is filled with oil of density 850 kg/m³ to a depth of 1.5 m.
(a) Calculate
(i) the pressure exerted by the oil on the base of the tank,
(ii) the force exerted by the oil on the base of the tank.
i) The pressure exerted by the oil on the base of the tank is 12495 Pascal.
ii) The force exerted by the oil on the base of the tank is 44982 Newton.
What is pressure?
The force delivered perpendicularly to an object's surface per unit area across which that force is dispersed is known as pressure.
Density of the oil: ρ = 850 kg/m³
Depth of the tank: d = 1.5 m
dimensions of rectangular base = 2.4 m × 1.5m.
We know that: acceleration due to gravity: g = 9.8 m/s².
i) the pressure exerted by the oil on the base of the tank: P= dρg
= 1.5 m × 850 kg/m³ × 9.8 m/s²
= 12495 Pascal.
ii) the force exerted by the oil on the base of the tank:
F = pressure × area
= 12495 Pascal × 2.4 m × 1.5m.
= 44982 Newton.
To learn more about pressure, refer the link:
https://brainly.com/question/12971272
#SPJ1
How do ultrasound waves detect fish?
By sending ultrasonic waves into to the water and listening for the returned echoes, a sonar may find these items.
Does ultrasonography work to find fish?So order to determine which way fish schools are travelling, fish finders employ high frequencies of tightly focused ultrasound that is transmitted at high voltage.
What method is employed to find fish?When a sonar signal or sound wave hits an object, it bounces back into the water.The signal is partially reflected back to the vessel by the fish, while the remaining portion travels to the ocean floor before returning to the boat.
To know more about ultrasound waves visit:
https://brainly.com/question/14694921
#SPJ4
a suspension scaffold that uses a two point swing stage anchorage is preferably accessed from?
A suspension scaffold that uses a two point swing stage anchorage is preferably accessed from the ground or from a rooftop, and then either raised or lowered to its working location.
What is a two point adjustable suspension scaffold?A two point adjustable suspension scaffold is sometimes referred to as a swing-stage scaffold and it is considered as the most common type of suspended scaffold.
Additionally, a two point adjustable suspension scaffold is designed and developed to be hung by cables (ropes) that are connected to stirrups at each end of the swing-stage scaffold platform, in order to enable the access of high-rise constructions and buildings.
According to the occupational safety and health administration (OSHA), a two point adjustable suspension scaffold can be accessed through the use of a ladder. However, the most preferred method of access is from the ground or from a rooftop, and then the scaffold should be either raised or lowered to its working location.
Read more on OSHA here: https://brainly.com/question/1278624
#SPJ1
7
Radon-222 is radioactive. It can be represented as 222 Rn.
86
For a neutral atom of radon-222, state
1. the number of protons,
2. the number of neutrons,
3. the number of electrons.
For a neutral atom of radon-222, the number of protons is 86, the number of neutrons is 136, and the number of electrons is 86.
What is a neutral atom?A neutral atom can be described as one in which the amount of the positive charge is equal to the of amount the negative charge. Therefore, the net charge on the atom will be equal to zero. Therefore, such type of atom is said to be a neutral atom.
For a neutral atom, we usually say that the number of electrons in an atom is equal to the number of protons. All chemical elements which are arranged in the modern periodic table are in their neutral state.
Given, the atomic number of Radon-22 is 86.
Atomic number = the number of electrons = Number of protons
The number of electrons for the neutral atom of Rn = 86
The number of protons in Rn-222 = 86
The number of neutrons = 222 - 86 = 136
Learn more about the neutral atom, here:
brainly.com/question/5308494
#SPJ1
A diffraction pattern involving parallel rays is called ___________ diffraction.
Select one:
a.Einstein
b.Poisson
c.Fraunhofer
d.Fresnel
A diffraction pattern involving parallel rays is called (c) Fraunhofer diffraction.
Because of the far-field location of observation and the increasingly planar nature of the outgoing diffracted waves passing through the aperture, Fraunhofer diffraction is a type of wave diffraction that takes place when field waves are passed through an aperture or slit. This only results in a change in the size of the observed aperture image.
The parallel rays approximation can be used to view it at distances beyond the near-field distance of Fresnel diffraction, which modifies the size and form of the observed aperture image. This only happens when the Fresnel number at these distances.
Fraunhofer diffraction, which is typically explained through the use of observational experiments utilizing lenses to intentionally diffract light, is based on the notion that a wave is split into many outgoing waves when passing through an aperture, slit, or hole. When waves pass through, they are split into two diffracted waves that move at right angles to one another and the remaining incoming wave. These waves are frequently used in observational techniques by placing a screen in their path so that the image-pattern observed can be seen.
Fraunhofer's diffraction equation:
= (See Diffraction - Single-slit diffraction):
= I (θ) = I 0 (sin (d π λ sin θ) d π λ sin θ) 2
where,
d is the slit width, λ is the wavelength, and θ is the observed angle.
To know more about Fraunhofer Diffraction:
https://brainly.com/question/30115938
#SPJ4
A ladybug is crawling up a wall at constant speed, as shown above. Which of the following are correct justifications for how forces help the ladybug move up the wall? Select two answers
A constant nonzero net force acts on the ladybug as it moves up the wall.
The ladybug exerts a downward force on the wall to move itself up the wall.
The upward force of the wall on the ladybug moves the ladybug up the wall.
The ladybug exerts an upward force on itself to move it up the wall.
A downward force is applied by the ladybug to the wall in order to advance up the wall, and a vertical force is applied by the wall to the ladybug.
What are the different kinds of force?The definition of force is the power or fuel applied to an item during any positive exercise or movement. A pressure or pull that results from two objects interacting is called a force. External force doesn't actually exist until two objects interact.
Why is force such a big deal?Forces are important because they produce changes to motion, as we learned in a prior lesson. Isaac Newton actually cites this in his first law. This inertia concept describes the phases of stillness and motion that occur in the absence of an external, opposing force.
To know more about force visit:
https://brainly.com/question/13191643
#SPJ4
which statement regarding respiration is correct?
a)respiration in autotrophic organisms occurs only during the day
b)fungi and monerans carry out aerobic respiration only
c)all living organisms carry out some form of respiration
d)all autotrophs and heterotrophs require glucose and oxygen for respiration
Aerobic respiration occurs in the mitochondria's cytoplasm. Anaerobic respiration results in the production of two ATP molecules. Prokaryotes, which are human muscle cells, engage in anaerobic respiration. Thus, option C is correct.
What living organisms carry out some form of respiration?All species' cells engage in cellular respiration. Utilizing oxygen, the cell converts the food (glucose) into carbon dioxide and water. The process of breaking down glucose while using oxygen is referred to as aerobic respiration.
Therefore, all living organisms carry out some form of respiration.
Learn more about respiration here:
https://brainly.com/question/19490229
#SPJ1
What does the 2 in mgcl2 indicate?
The 2 in MgCl2 indicates that in the given compound there are 2 ions of Chlorine used.
As we know,
The valency of Magnesium is 2, while the valency of Chlorine is 1.
So, for forming a compound we need 2 ions of Chlorine with 1 ion of Magnesium.
MgCl2 is commonly known as Magnesium bromide which is formed by the combination of magnesium and bromine.
In chemistry for representing a diatomic molecule, or simply the molecules which have 2 atoms, we often use the symbol of the element and include 2 in the subscript for indicating that two atoms of that element are joined together.
For more questions on Magnesium bromide
brainly.com/question/25947089
#SPJ4
a swimmer swims 100m through the water with a force of 200 Newtons.
How much work did the swimmer do?
A. 20000 Nm
B. 2 Nm
C. 0.5 Nm
Answer: A. 20000 Nm
Explanation:
The Work formula is:
Work = Force x Displacement
For this question:
Force is 200N
Displacement is 100m
So 200N x 100m = 20000Nm
Hope this helps!
ANSWER SO U DONT HAVE TO( I GOT A 100 TRUST ME)
Would you personally get better results and be more motivated by participating in physical activities that are competitive or recreational? Explain your choice and choose at least five physical activities that you would be interested in participating in that fall under the category you have chosen.
ANSWER:
i would be more motivated by participating in physical activities that are recreational. Competitive activities may be a big responsibility because you have to aim for a win. If you will be exercising regularly, it will make you happy without any aim of winning in a contest. Just like playing sports such as badminton, basketball, volleyball, baseball, and soccer which need a team. These recreational activities will be advisable because you are with others who love the sport also but not treating it as a competition.
Yes i would personally get better results and be more motivated by participating in physical activities that are competitive or recreational.
My motivation would increase if I engaged in leisure physical activity. Because you must aspire for victory, competitive hobbies may come with a lot of responsibilities. Regular exercise will make you happy regardless of whether you're doing it to compete or just for the sake of it. similar to team sports like baseball, soccer, basketball, badminton, and volleyball. Because you'll be with people who share your passion for the sport but aren't competing with you, these leisure activities are a good idea.
To know more about force, visit:
https://brainly.com/question/13191643
#SPJ1
the fourth band of a resistor color code is gold. the fourth letter on a capacitor's code is j. calculate the propagated percent error in the time constant of a circuit using these two circuit elements in series with a d. c. power supply. enter a single digit (
The propagated percent error in the time constant of a circuit is ±10% using these two circuit elements in series with a d. c. power supply.
What is error?The discrepancy between the measured and actual values might be used to define an error.
The fourth band of a resistor color code is gold means ± 5% tolerance in measurement of resistor.
The fourth letter on a capacitor's code is j means ± 5% tolerance in measurement of capacitor.
Now, the time constant of a RC circuit = CR.
Hence, the propagated percent error in the time constant of a circuit using these resistor and capacitor = ± 5% + (± 5%)
= ±10%.
Find more about error, refer the link:
https://brainly.com/question/13089857
#SPJ1
a wire that is 0.50 m long and carrying a current of 8.0 a is at right angles to a uniform magnetic field. the force on the wire is 0.40 n. what is the strength of the magnetic field? question 24 options: 0.010 t 0.10 t 1.0 t 10 t
The force divided by the product of the wire length and current through the wire gives the strength of magnetic field. The magnetic field here is 0.1 Tesla.
What is magnetic field strength?A magnetic field can be produced from the deflecting coil or wire carrying current. The magnetic field lines produced will be perpendicular to the field lines from the electric field.
The force acting on the combined field is the product of the magnetic field strength B, length of the wire L, and the current passing through the wire I as written below:
F = B I L
Given that the length L = 0.50 m
current I = 8 A
and force f = 0.40 N.
Thus, magnetic field strength B = F/I L
= 0.40 / ( 0.50 m× 8 A)
= 0.1 T.
Therefore, the field strength is 0.1 T.
To find more on magnetic field, refer here:
https://brainly.com/question/14848188
#SPJ1
What is cutoff frequency formula?
The cutoff frequency formula is 1 / (2 * pi * R * C).
What do you mean by cutoff frequency of a device?
The cutoff frequency of a device or system is the frequency at which its response starts to fall off sharply. It is the frequency above which the device or system does not pass or amplify signals effectively.
The cutoff frequency of a device or system can be calculated using the following formula:
cutoff frequency = 1 / (2 * pi * R * C)
where R is the resistance of the device or system, and C is the capacitance of the device or system.
The cutoff frequency is often used to describe the performance of electronic filters, such as low-pass filters, high-pass filters, and band-pass filters. It is also used to describe the performance of other types of systems, such as microphones and speakers.
Therefore, the cutoff frequency is formula is 1 / (2 * pi * R * C).
To learn more about cutoff frequency from given link:
https://brainly.com/question/27986610
#SPJ4
A great strength of correlational research is the
O cause-effect sequencing of events.
O ambiguity of the results.
O ability to extract the influence of confounded variables.
O fact that it occurs in real-world settings.
Option D; A great strength of correlational research is the fact that it occurs in real-world settings.
When doing correlational research, which is a type of nonexperimental study, the researcher examines two variables and assesses their statistical relationship (i.e., the correlation) with little to no effort made to account for unrelated variables. Since it helps us to ascertain the magnitude and direction of correlations between two variables, correlational research is helpful. Contrarily, correlation is limited since it only provides evidence of a link and provides little information about its underlying mechanisms. Through the correlational method, relationships between variables are sought. For instance, a researcher would be interested to know if a user's privacy preferences in a social networking software are influenced by their personality, IQ, level of education, employment status, age, gender, income, and other factors
Learn more about correlational research here:
https://brainly.com/question/29783805
#SPJ4
9. An astronaut weighs 500 Newtons on Earth and 25
newtons on asteroid X. The acceleration due to
gravity on asteroid X is approximately
A) 1 m/s²
C) 0.2 m/s²
B) 2 m/s²
D) 0.5 m/s²
The acceleration due to gravity on asteroid X is approximately 0.5 m/s². The acceleration an object experiences as a result of gravitational force is known as acceleration due to gravity.
What is acceleration due to gravity ?To calculate the acceleration due to gravity on asteroid X, you need to first determine the mass of the astronaut. Since weight is a measure of the force of gravity on an object, and the force of gravity is directly proportional to the mass of the object, the mass of the astronaut can be calculated by dividing the weight on Earth by the acceleration due to gravity on Earth.The acceleration due to gravity on Earth = 9.8 meters per secondThe mass of the astronaut = 500 Newtons / 9.8 m/s^2, 50 Kg
The equation for gravitational force is F = Gm1m2/r^2,
where F is the force of gravity, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between them. Solving for r, you can calculate that the distance between the astronaut and the center of asteroid X is approximately 5 meters. Since the acceleration due to gravity is defined as the force of gravity divided by the mass of the object, you can use this distance to calculate the acceleration due to gravity on asteroid X. Dividing the force of gravity on the astronaut (25 Newtons) by the mass of the astronaut (51 kilograms).Calculate that the acceleration due to gravity on asteroid X = 0.49 meters per second squared.
That is 0.5 m/s²
To learn more about acceleration due to gravity refer :
https://brainly.com/question/88039
#SPJ1
How are the two forces that make up electromagnetic forces related?
a. both are static
b. both gravity and light are caused by the motion of charged particles such as electrons
c. both the electric and magnetic forces are caused by the motion of charged particles such as electrons
d. both can be positive, negative, or neutral
Two forces that make up electromagnetic forces related both the electric and magnetic forces are caused by the motion of charged particles such as electrons and is therefore denoted as option C.
What is Electromagnetic force?This is referred to as the type of force which explains how both moving and stationary charged particles interact due to it occurs between electrically charged particles such as a
The electric and magnetic forces which are present are usually caused by the motion of charged particles such as electrons which is therefore the reason why option C was chosen as the correct choice.
Read more about Electromagnetic here https://brainly.com/question/19042165
#SPJ1
What is the equation that shows the inverse relationship between energy of light and its frequency?
A inverse relationship in between photon's energy (E) and the light's wavelength is described by the formula E=hcE=hc, where h has so far been Planck's constant and c is actually the speed of light.
What connection exists between light frequency and energy?Energy --> Frequency The energy of light increases with its frequency.
Higher frequencies result in shorter wavelengths, as the challenges mentioned above demonstrate.E is also equal to h c / λ.Short wavelengths & high energies characterize high frequency light.
Does the energy of light and its frequency have an inverse relationship?Energy is inversely correlated with wavelength because it is directly related to a electromagnetic frequency of the photon.The energy of a photon increases with its frequency.
To know more about frequency visit:
https://brainly.com/question/5102661
#SPJ4
How do you calculate energy emitted by electrons?
The link between the work function, W, and maximum electron energy, E m an x, for a given wavelength, can be determined using the formula = h max, where h is the Planck constant and c is the speed of light.
What name is given to the release of electron energy in science?The electron moves to a state with higher energy after receiving the energy. The electron absorbs the extra energy and releases it by the opposite process known as emission to return to its ground state. To be in the lowest energy level, an electron requires precisely -13.6 eV of energy.
A material experiences the photoelectric effect when it is subjected to electromagnetic radiation, such as light when electrons are released. They are referred to as photoelectrons.
To learn more about energy emitted by electrons from given link
brainly.com/question/30011257
#SPJ4
Question 5 Planet X Planet Y Planet Z Mo 9Mo Ro 2Ro At one point in their individual orbits, three planets, X; Y, & Z, are along the same horizontal line. The gravitational force on Planet X from Planet Z is Fo. The distance from the center of mass of each planet to an adjacent planet is given in terms of Ro, and their respective masses are given in terms of Mo, as shown above. What is the net force on Planet Y, and what reasoning supports this claim? AMo
The net force on Planet Y because the gravitational force between planet XY and planet YZ is 5F₀.
Full question is in the attachment. Formula to calculate the gravitational force between two objects
F = G × (m₁ × m₂ ÷ r²)
m = the mass of the object (kg)The direction of the gravitational force between two objects on the first object is from the first object to the second object. The gravitational on planets X and Z
F₀ = G × (m₁ × m₃ ÷ r₃²)
F₀ = G × (M₀ × 9M₀ ÷ (3R₀)²)
F₀ = G × (9M₀² ÷ 9R₀²)
F₀ = G × (M₀²/R₀²)
On planet Y there are two forces
The gravitational force with planet XThe net force on planet Y
F = F₂ - F₁
F = 9F₀ - 4F₀
F = 5F₀
Learn more about the gravitational force here: https://brainly.com/question/28654549
#SPJ4
please can any one answer for this question
Answer:
S = 1/2 g t^2 time for stone to fall distance S
S = V0 (t - 2) * 1/2 g (t -2)^2 time for stone to fall distance S with an initial speed of 30 m/s, 2 seconds later
1/2 g t^2 = V0 t - 2 V0 + 1/2 g t^2 - 2 g t + 2 g equating distance fallen
t = 3.88 sec
Check:
S = 1/2 * 9.8 * 3.88^2 = 73.8 m
S = 30 * 1.88 + 1/2 * 9.8 * 1.88^2 = 73.7 m
You are going to invent a new device that people can use instead of a microwave to warm up leftovers. Which type of electromagnetic wave would be most useful to investigate?.
If we are going to invent a new device that people can use instead of a microwave oven to warm up leftovers, the type of electromagnetic wave that would be most useful to investigate would probably be infrared waves.
Electromagnetic waves or EM waves are waves that are created as a result of vibrations between an electric field and a magnetic field.
Since electromagnetic waves are of different energy range and different electromagnetic waves are used for different works.
Higher energy range electromagnetic waves cannot be used to expose for human because they can cause damage to them. So, we can not use them for warming purpose as they are dangerous. So X rays and Gamma rays can not be used
And least energy waves can also not be used. So, radio waves which are least energy cannot be used for the purpose of warming.
So correct answer for the replacement of microwaves is infrared waves because they have sufficient energy that can be used to warm up.
learn more about electromagnetic waves:
https://brainly.com/question/3101711
#SPJ4
Can someone explain how an avalanche occurs.
Answer:
Explanation:
Thousands of avalanches occur in Canada each year. They happen in all regions of Canada, but are more frequent in the mountains of British Columbia, Yukon and Alberta. Avalanches can be triggered by wind, rain, warming temperatures, snow and earthquakes. They can also be triggered by skiers, snowmobiles, hikers, vibrations from machinery or construction. Avalanche facts:
An avalanche occurs when a layer of snow collapses and slides downhill.
Avalanches are caused by four factors: a steep slope, snow cover, a weak layer in the snow cover and a trigger.
Roads and railway tracks may be rerouted to reduce risks.
Safe avalanches may be triggered in dangerous snow packs.
Avalanches can travel up to 90 km/h.
After one hour, only one in three victims buried in an avalanche is found alive. The most common causes of death are suffocation, wounds and hypothermia.
Why does carbon dioxide get the most attention?
Out of all the human-influenced climate factors examined by the IPCC, CO2 has the highest positive RF overall. Other gases are capable of trapping heat more effectively than CO2 does, molecule for molecule.
Why is CO2 regarded as the primary cause of climate change?When coal, oil, natural gas, and other carbon-rich fossil fuels are burned, carbon dioxide is released into the atmosphere. Despite not being the most potent greenhouse gas, carbon dioxide.
Why is carbon dioxide such a significant deal?What's so significant about CO2 is this: A greenhouse gas, that is. The atmosphere's CO2 hence helps to confine heat near to Earth. It is beneficial for Earth to retain some of the energy it receives from the Sun so that it does not entirely escape back into space.
To know more about carbon dioxide visit:-
https://brainly.com/question/21943405
#SPJ4
part h part complete an l - r - c series circuit has inductance 42.0 mh , capacitance c , and resistance r . without the resistor, the angular frequency of oscillation is 624 rad/s . with the resistor, the angular frequency is 208 rad/s . find the value of c . express your answer with the appropriate units. c
Inductance is 42.0 mh, capacitance is c, and resistance is r in the part h a l - r - c series circuit. The angular frequency of oscillation without the resistor is 624 rad/s. The angular frequency with the resistor is 208 rad/s.
Angular frequency: what is it?The difference between frequency and angular frequency (measured in radians per second) is twofold (measured in cycles per second, commonly known as Hz). Instead of the letter f, the sign stands in for frequency. a sphere with an axis around which it spins. The points farther from the axis are fulfilling and moving more quickly = v / r.
Calculation:inductance (L) = 42 mH
= 42 × 10⁻³ H
Angular frequency (ω) = 620 rad/sec
without the resistor, the angular frequency of oscillation is,
ω = 1/ √LC
or, 1/√LC = 620 rad/sec
or, 1/LC = (620)²
or, C = 1 / (620)²× (42 × 10⁻³)
or, C = 6.19 × 10⁻⁵ F
With resistor, ω = 208 rad/sec
or, ω = R/L
or, R = ωL
or, R = (42 × 10⁻³) × (208)
or, R = 8.736 Ω.
To know more about Angular frequency visit:-
https://brainly.com/question/29107224
#SPJ4
Question:
An L-R-C series circuit has inductance 42.0 mH, capacitance C, and resistance R. Without the resistor, the angular frequency of oscillation is 624 rad/s. With the resistor, the angular frequency is 208 rad/s.
Find the value of C.
Find the value of R.
the figure(figure 1) is a graph of ex. the potential at the origin is -100 v .
This graph shows the potential at the origin as -100 V. The x-axis represents distance from the origin and the y-axis represents the potential.
Potential is the ability to become real or actual. It is the capacity to do something, to become something, or to produce something. Potential is not something that is tangible or visible, but instead is an idea or concept. Potential is the potential to become something greater than what it is currently.
The graph shows that the potential decreases linearly with distance from the origin, indicating that the field has a uniform strength. The graph also shows that the potential at any given distance is equal to the potential at the origin (the y-intercept) minus the product of the distance and the field strength.
To know more about Potential:
https://brainly.com/question/30114261
#SPJ4
your electric utility company sends you a monthly bill informing you of the number of kilowatt- hours you have used that month. a. is the utility charging you for energy or power? explain.
Your electric utility company sends you a monthly bill informing you of the number of kilowatt- hours you have used that month therefore the utility is charging you for energy.
What is a Utility?This is referred to as a type of service such as light, power etc which are provided by a public utility.
Electricity utility send us a monthly bill of the number of unit consumed by our appliance per month and the amount you owe is derived by multiplying your utility's rate per kWh by the total kWhs you used that month. It is also how much energy is used over a certain time period which is therefore the reason why energy was chosen as the correct choice.
Read more about Utility here https://brainly.com/question/5374399
#SPJ1