The concentration of the HCl solution is 0.816 M (or 816 mM).
To determine the concentration of the HCl solution, we can use the balanced equation for the neutralization reaction between HCl and NaOH:
HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)
This reaction is a neutralization reaction, which means that the number of moles of H+ ions (from the HCl) is equal to the number of moles of OH- ions (from the NaOH).
Given that 20.4 mL of a 1 M NaOH solution was needed to completely react with 25 ml of HCl, we can use the volume and molarity of the NaOH solution to determine the number of moles of OH- ions:
Molarity = moles of solute/litres of solution
Moles of OH- = (20.4 mL x 1 M) / 1000 mL/L = 0.0204 moles
Since the number of moles of H+ ions is equal to the number of moles of OH- ions, we can use the number of moles of OH- to determine the number of moles of H+ ions:
moles of H+ = moles of OH- = 0.0204 moles
We can then use the number of moles of H+ ions and the volume of the HCl solution to determine the concentration of the HCl solution:
Molarity = moles of solute/litres of solution
concentration of HCl = moles of H+ / (25 mL / 1000 mL/L) = 0.0204 moles / 0.025 L = 0.816 M (or 816 mM)
Therefore, the concentration of the HCl solution is 0.816 M (or 816 mM).
Learn more about Neutralization Reaction here: https://brainly.com/question/28970253
#SPJ4
3) Which of the following is a true statement?
A: Ice cannot float on water.
B: Carbon is a part of the compound of water.
C: Water is a universal solvent.
D: Hard water is good for making soap lather.
PLS HELP ME PLS
Water is called a ‘universal solvent' because water can dissolve much more substances than any other liquid found in nature but water cannot dissolve every substance.
Is water called universal solvent?Water is referred to as a "universal solvent" because it has a considerably wider range of natural solvent properties than any other liquid. However, water is not capable of dissolving all compounds.
For instance, water cannot dissolve hydroxides, fats, or waxes because oppositely charged particles are not very soluble in water. Hydrogen and oxygen atoms are arranged polarly in water molecules.
The oxygen atom has a negative charge, while the hydrogen atom on one side has a positive charge.The water molecule can more easily attach to various compounds thanks to these charges.
To learn more about universal solvent refer to:
https://brainly.com/question/1834245
#SPJ1
Because it can dissolve a greater variety of chemicals than any other natural liquid, water is referred to as a "universal solvent," though it does not dissolve all substances. The option C is true.
The term "universal solvent" refers to water.In comparison to other liquids, water has a much larger spectrum of natural solvent qualities, earning it the moniker "universal solvent". Nevertheless, not all substances can be dissolved by water.
Because water is not highly soluble in oppositely charged particles, it cannot dissolve hydroxides, fats, or waxes, for example. Water molecules have polar arrangements of the hydrogen and oxygen atoms.
In contrast to the hydrogen atom on one side, which has a positive charge, the oxygen atom has a negative charge.
These charges allow the water molecule to more readily bind to different substances.
For more information about universal solvent kindly visit to brainly.com/question/1834245
#SPJ1
Hypothesize as to why Seaborg removed the actinide and lanthanide series elements and placed them into their own block!
Which argument supports the claim that dissolving calcium chloride (CaCl2) in water is a chemical change
The argument that supports the claim that dissolving solid calcium chloride (CaCl2) in water is a chemical change is A. The ionic bond among calcium and chloride ions has been broken..
When solid calcium chloride is added to water, the ionic bonds between the calcium ions (Ca2+) and chloride ions (Cl-) are broken apart by the polar water molecules. The calcium ions and chloride ions are then surrounded by the water molecules, forming a new chemical compound called calcium chloride hydrate (CaCl2*xH2O) which is different from the original solid calcium chloride. This process is a chemical change because it creates new substances and the original chemical bonds are broken and new bonds are formed.
Learn more about chemical compound here:
https://brainly.com/question/11527546
#SPJ4
the complete question is:
Which of the following arguments supports the claim that dissolving calcium chloride (CaCl2) in water results in a chemical change?
A. The ionic bond among calcium and chloride ions has been broken.
B. By evaporating the water, the solid calcium chloride can be recovered.
C. The ions found in the solid remain in the solution and have not changed.
D. Ions are attracted by the polar water molecules.
Which term refers to a substance that changes color when there is a certain concentration of hydrogen ions in a solution
Chemical Indicator refers to a substance that changes color when there is a certain concentration of hydrogen ions in a solution.
Chemical indicators are any substances that provide a clear indication—typically a change in color—of the presence or absence of a certain chemical species, like an acid or an alkali, in a solution. One such chemical is methyl yellow, which gives an alkaline solution a yellow color. When introduced to acidic or alkaline solutions, substances are considered indicators when their color changes. There are several indicators that are frequently used in laboratories, including litmus, phenolphthalein, and methyl orange. Litmus paper: It turns red in acidic solutions and blue in basic ones. Methyl orange: This chemical exhibits a red color in an acidic solution and a yellow color in a basic solution.
Learn more about Chemical indicators
brainly.com/question/13748767
#SPJ4
What is the relationship between the enthalpy (AH) and entropy (AS) of a
reaction that is never spontaneous?
OA. +AH,-AS
OB. -AH, +AS
OC. -AH-AS
OD. +AH, +AS
SUBMIT
The relationship between the enthalpy (ΔH) and entropy (ΔS) of a reaction that is never spontaneous is -ΔH, +ΔS option - B is correct answer.
A spontaneous reaction is what?When a reaction occurs spontaneously, the system doesn't require any additional energy input because the change in free energy is negative.
When the enthalpy change is negative and the entropy change is positive, the reaction is always spontaneous.
The free energy change is always positive and the reaction is never spontaneous if the reaction is endothermic (H positive) and the entropy change S is negative (less disorder).
Although a spontaneous reaction may result in an increase or decrease in entropy or enthalpy, it will always result in a decrease in free energy, which is a negative G.
To know more about enthalpy visit:
https://brainly.com/question/13996238
#SPJ1
The following data was collected when a reaction was performed experimentally in the laboratory.
Reaction Data:
Reactants:
Fe2O3 (3 moles)
Al (5 moles)
Products:
Al2O3 (?)
Fe (?)
Determine the maximum amount of Fe that was produced during the experiment. Explain how you determined this amount.
Please be thorough. I am in agony at this question and I need the most help I can get. Thanks
According to the data collected during the experimental reaction in the laboratory, and the balanced equation of the reaction, 5 moles of iron (Fe) and 2.5 moles of aluminum oxide (Fe2O3) were produced.
Determination of the maximum amount of Fe that was produced during the experiment.Balanced equation of the reactionFe2O3 + 2Al → 2Fe + Al2O3
Limit reagent determinationIf 1 mole of Fe2O3 is combined with 2 moles of Al
So 3 moles of Fe2O3 combine with x moles of Al
X moles of Al = 3 moles Fe2O3 x 2 moles Al / 1 mole Fe2O3 = 6 moles
Limiting reagent: Al, because there are only 5 moles available
Determination of the amount of iron producedIf 2 moles of Al produce 2 moles of Fe
So 5 moles of Al produce x moles of Fe
X moles of Fe = 5 moles of Al x 2 moles of Fe / 2 moles of Al = 5 moles
Determination of the amount of aluminum oxide producedIf 2 moles of Al produce 1 mole of Fe2O3
So 5 moles of Al produce x moles of Fe2O3
X moles of Fe = 5 moles of Al x 1 mole of Fe2O3 / 2 moles of Al = 2.5 moles
Explanation about the procedures used to determine the amount of ironBy establishing the balanced equation of the reaction and the stoichiometric relationships, the amount of limit reagent is first determined and with this data, the moles of products are later determined.
Learn more about data was collected when a reaction was performed experimentally in the laboratory at https://brainly.com/question/29100434
#SPJ4
Using the table of average bond energies, estimate the energy needed to break the bonds of the reactants and the energy released when the products from for the reaction N2 + O2 –> 2NO. Note N2 has a triple bond and O2 and NO have double bonds.
The energy that is released for the breaking of bonds is 229 kJ/mol.
What is the energy released?We should be able to recall that the enthalpy of the reaction taken to be the energy that is evolved or absorbed in the reaction that is ongoing. We have to note that in the course of the reaction there would be the breaking and the making of bonds.
Now we know that;
The bond energy can be given as;
Sum energy of the broken bonds of reactants - Sum of the energy of the formed bonds
Hence;
(945 + 498) - 2(607)
1443 - 1214
= 229 kJ/mol
Learn more about enthalpy:https://brainly.com/question/13996238
#SPJ1
It takes a water wave 5.2 seconds to travel between two docks there are 19 m apart. An observer notices that 20 crests pass the first dock in 17 seconds.
find the wavelength of the water waves.
Answer:
152.12
Explanation:
hope it helps
Kong Mali po sorry
The amount of ascorbic acid, C6H8O6. in orange juice was determined by oxidizing the ascorbic acid to dehydroascorbic acid, C6H6O6. with a known excess of l2, and back titrating the excess I2 with Na2S203. A 5.00-mL sample of filtered orange juice was treated with 50.00 mL of excess 0.01023 M l2. After the oxidation was complete, 13.82 mL of 0.07203 M Na2S203 was needed to reach the starch indicator endpoint. Report the concentration of ascorbic acid in milligrams per 100
mL
There is 2.43 mg of ascorbic acid in the 5.00-mL sample, or 48.6 mg/100 mL of orange juice.
Explanation:
For i2+na2s2o3 titration,
I2 + 2 S2O3^-2 <--> 2 I^-1 + S4O6^-2
13.82 mL of 0.07203 M Na2S2O3 was needed to reach the starch indicator end point.
Number of moles of Na2S2O3 = 13.82*0.07203= 0.9954546 millimoles.
So, number of moles of excess I2 = 0.9954546/2 = 0.4977273 millimoles.
For oxidizing the ascorbic acid to dehydroascorbic acid
C6H8O6 + I2 --> C6H6O6 + 2 H+ + 2 I-
SO 1mole of I2 read for 1 mole of C6H8O6.
Initial I2 used = 50*0.01023 = 0.5115 millimoles.
Number of moles of I2 used = 0.5115 - 0.4977273 = 0.0137727 millimoles.
Number of moles of C6H8O6 in5 ml of orange juice = 0.0137727 millimoles.
Weight of C6H8O6 in5 ml of orange juice = number of moles * molecular weight = 0.0137727 * 176 = 2.4239952 mg
In 100 ml of orange juice = 2.4239952/5) *100 = 48.479904 milligrams per 100 mL. is the answer.
To learn more about ascorbic acid visit;
https://brainly.com/question/14793819
#SPJ4
The photoelectron spectrum for the element nitrogen is represented above. Which of the following best explains how the spectrum is consistent with the electron shell model of the ato
f the atom?
A. The leftmost peak represents the valence electrons.
B. The two peaks at the right represent a total of three electrons.
C. The electrons in the ls sublevel have the smallest binding energy
D. The electrons in the 2p sublevel have the smallest binding energy
The electrons in the 2p sub level have the smallest binding energies, which is the best explanation for how the spectrum is consistent with the electron shell model of the atom. Option D is correct as a result.
Photoemission spectroscopy, often referred to as photoelectron spectroscopy, measures the amount of energy emitted by electrons from solids, gases, or liquids via the photoelectric effect. This procedure involves getting the energy for the electrons from an outside source, such as sunlight.
The photoelectric effect is a process in which electrons receive energy from an external source, such as sunlight, become excited, and transition from the ground state to the excited state. As a result of this process, there is a constant flow of electrons, which in turn causes a flow of energy.
Learn more about spectrum here:
https://brainly.com/question/11837978
#SPJ4
Which of the following ions has the largest radius?
a. Na+
b. K+
c. CS+
d. Li+
The size of an ion is determined by its atomic radius, which is a measure of the size of the atom from which the ion is formed. The atomic radius of an atom is generally determined by the size of its electron cloud. The size of the electron cloud is influenced by the number of electrons and the energy levels they occupy.
Of the ions given, Li+ has the smallest atomic radius because it has the smallest number of electrons and the highest effective nuclear charge, which means that its electrons are held more closely to the nucleus. Na+, K+, and CS+ have larger atomic radii than Li+ because they have more electrons and lower effective nuclear charges, which means that their electrons are held more weakly by the nucleus.
Therefore, the answer is CS+ has the largest radius.
Which element has a violent reaction when combined with cold water ?____
Base your answers to the following questions on the electron configurations below:
(A)2s1
(B)[Ar] 3d104s24p1
(C)[Kr] 4d105s25p3
(D)[Ne] 3s2
(E)[Kr]4d105s25p6
The element with electronic configuration 2s1, which is lithium, has a violent reaction with cold water.
The most reactive metals in the periodic table are the alkali metals (Li, Na, K, Rb, Cs, and Fr); they all react with cold water violently or even explosively, displacing hydrogen. In the reduction of water to hydrogen gas (H2) and the metal ion hydroxide (OH), Group 1 Metal (M) is oxidised to its metal ions.
The second most reactive metals in the periodic table are the alkaline earth metals (Be, Mg, Ca, Sr, Ba, and Ra), which also exhibit increased reactivity in higher periods like the Group 1 metals. The only alkaline earth metal that does not react with water or steam, even when heated to a high temperature, is beryllium (Be). Furthermore, beryllium has an exterior oxide layer that is robust, which reduces its reactivity at lower temperatures.
To know more about periodic table from the link
brainly.com/question/15987580
#SPJ4
does calcium oxide reacts with carbon monoxide
Yes, calcium oxide (CaO) reacts with carbon monoxide (CO) to form calcium carbonate (CaCO3) and oxygen gas (O2). The reaction can be represented by the following equation:
CaO + CO -> CaCO3 + O2
This reaction is an example of a chemical change, as it results in the formation of a new substance with different chemical properties. The reaction is also exothermic, meaning that it releases heat.
Calcium oxide is a white solid that is used in a variety of applications, including cement production and the purification of flue gases. Carbon monoxide is a colorless, odorless gas that is toxic to humans when inhaled. It is produced as a byproduct of the incomplete combustion of fossil fuels.
Hope This Helps You!
write the reaction equation for the reversible chemical reaction that occurs when the indicator bromcresol
Reactions that are reversible have the ability to move both forward and backward. Reactants change into products in a reversible reaction, but products can also change back into reactants.
In actuality, the opposing reaction as well as the forward reaction will occur simultaneously. In some chemical reactions, the reaction's products might combine to form the reactants' original form. Reversible reactions are what they are referred to as. To illustrate them, use the formula: A + B C + D. Only in one direction can irreversible chemical reactions take place. Reactants can transform into products, while products cannot transform back into reactants. Chemical reactions that can be reversed can happen both ways. The products can change back into the reactants, and the reactants can change back into the products.
Learn more about chemical :
brainly.com/question/70429
#SPJ4
What determines the carrying capacity in an ecosystem?
To solve this we must be knowing each and every concept related to ecosystem. Therefore, the maximum number of species that a system can safely support determines the carrying capacity in an ecosystem.
What is ecosystem?An ecosystem is the fundamental fundamental unit of such an environment where living and nonliving creatures interact with one another, both of which are essential for the continuation of life on Earth.
The maximum number of species that a system can safely support is known as carrying capacity. The ability of an ecosystem to replenish the food, water, environment, or other essentials that populations have to thrive are just a few examples of the numerous variables that may affect an ecosystem's carrying capacity of a specific species.
Therefore, the maximum number of species that a system can safely support determines the carrying capacity in an ecosystem.
To learn more about ecosystem, here:
https://brainly.com/question/29775110
#SPJ1
Give the ΔH value for the combustion of ethanol as shown in the reaction C2H5OH(g)+3O2(g)⟶Δ2CO2(g)+3H2O(g)+1278 kJ .
Express your answer using four significant figures. If the value is positive, do not include the + sign in your answer.
The value of the ΔH for the reaction is obtained as 1278 kJ .
What is the value of ΔH?We have to note that the enthalpy change of the reaction has to do with the heat that ahs been evolved or absorbed in a reaction. In this case we have to obtain the enthalpy change by looking at the combustion reaction that has been shown here.
It is clear that from the thermochemical reaction equation, there is the evolution of about 1278 kJ of heat in the process of the reaction as shown in the question that we have above.
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
What actions do you take immediately after a burn occurs?
Cool in cold or lukewarm water for 20 minutes.
This should be done as soon as possible after an injury. Never use ice, ice water, cream, or greasy substances like butter on the burn. Be careful to keep the airways open when treating burn victims. Associated smoke inhalation injuries are very common, especially when the patient is burned in an enclosed space such as a room or building. Even people who have been burned outdoors can inhale smoke. Stop the burning process as soon as possible. Remove all clothing and jewelry near the burned area.
Learn more about inhalation injuries visit:
brainly.com/question/28271345
#SPJ4
Draw the stracture of 2-bromo-4-chloro-3, 3-dimethylhex-1-ene
answer :
this is the structure if you want it
Among the following radioactive parent isotopes, which has the shortest half-life?A) uranium-238B) potassium-40C) rubidium-87D) carbon-14
The half-life of a radioactive isotope is the time it takes for half of the original number of atoms in a sample to decay.
The isotope with the shortest half-life among the given options is:
D) carbon-14
The half-life of carbon-14 is 5,730 years which is shorter than the other isotopes. Uranium-238 has a half-life of 4.5 billion years, potassium-40 has a half-life of 1.25 billion years and rubidium-87 has a half-life of 49.8 billion years, all are greater than the half-life of carbon-14.
So, carbon-14 is the isotope with the shortest half-life among the given options.
It is important to note that the half-life of an isotope is a constant property of the isotope. For example, the half-life of carbon-14 is always 5,730 years and does not change with the amount of carbon-14 present or any other factors.
Learn more about Half-life reactions here: https://brainly.com/question/29604077
#SPJ4
A sample of a gas has a mass of 14.2g and occupies a volume of 0.678 liters at 25 C and a pressure of 0.80 atm. what is the density of a gas under these conditions
The density of gas can change, in contrast to the density of solids or liquids. This is due to the fact that gas is not compact and that temperature and pressure have an impact on its molecules.
The formula is d = MP/RT, where d is the gas's density in kilograms per liter, M is its molar mass in grams per mole, P is its pressure in atmospheric pressure units, and R is the gas law constant. The equation demonstrates that the molar mass increases as gas density increases. The pressure and temperature parameters for the gas determine the gas's density. Gas can dramatically alter its volume with a change in pressure due to its strong compressibility. Therefore, changes in density (at low pressure) can be substantial.
Learn more about molar here-
https://brainly.com/question/12127540
#SPJ4
Phosphoric acid, H3PO4, is produced through the reaction between tetraphosphorus decoxide and water. Write an unbalanced formula equation including physical states for the reaction.
P4O10(s) + H2O(l) --> H3PO4(aq)
Phosphoric acid, also known as orthophosphoric acid, is a triprotic acid.It is commonly used in food and beverage production, as well as in fertilizers, detergents, and rust removers.It is produced through a chemical reaction between tetraphosphorus decaoxide and water.The reactants are tetraphosphorus decaoxide (white powder) and water (clear liquid).The resulting product is Phosphoric acid (clear, colorless liquid) which is commonly found in an aqueous state (aq).The chemical equation for the reaction is P4O10(s) + H2O(l) --> H3PO4(aq) (unbalanced)The equation indicates the physical states of reactants and products which is important in performing the reaction.Learn more about Phosphoric acid here:
https://brainly.com/question/15867951
#SPJ4
A gas mixture containing oxygen, nitrogen, and He has a total pressure of 189.9 kPa. If PO2 = 104.6 kPa and PN2 = 13.0 kPa, what is PHe ?
A gas mixture containing oxygen, nitrogen, and He has a total pressure of 189.9 kPa. If PO2 = 104.6 kPa and PN2 = 13.0 kPa, PHe is 72.3 kPa.
What is total pressure ?Static pressure and velocity pressure are added to create total pressure. There is static pressure in a fluid that is not flowing. The pressure required to accelerate air from a zero velocity to a specific velocity that is proportional to the kinetic energy of the air stream is known as velocity pressure.
Consider the friction that exists between a fluid and the interior surface of a pipe. The fluid's density and velocity are used to compute the dynamic pressure: the total pressure in a mixture of ideal gases is the total of the partial pressures of the individual gases.
Total pressure = PO2 + PN2 + PHe
189.9 kPa = 104.6 kPa + 13.0 kPa + PHe
PHe = 72.3 kPa
Thus, A gas mixture containing oxygen, nitrogen, and He has a total pressure of 189.9 kPa. If PO2 = 104.6 kPa and PN2 = 13.0 kPa,PHe is 72.3 kPa.
To learn more about total pressure, follow the link;
https://brainly.com/question/15060031
#SPJ1
Convert the following numbers into the standard form of scientific notation 0. 010x 10e5
The standard form of scientific notation for 0. 010x 10e5 is 1.0 × 10^3.
Scientific notation is a form of presenting large numbers or very small numbers in a simpler form.
There are some rules to write scientific notation:
The base should be always 10. The exponent must be a non-zero integer.
Absolute value of the coefficient should be greater than or equal to 1 but it should be less than 10.The mantissa carries the rest of the significant digits of the number.
The power of 10 will be positive, if the given number is multiples of 10 then the decimal point has to move to the left. The power of 10 will be negative If the given number is smaller than 1 and then the decimal point has to move to the right.
If you need to learn more about scientific notation, click here
https://brainly.com/question/18073768?referrer=searchResults
#SPJ4
Draw two isomers of this, and name each one: C4H6
Two isomers are Butadiene Bicyclobutane.
What is isomers?Isomers are substances that contain precisely the same number of atoms, i.e., they have the exact same empirical formula, but they differ from one another by the arrangement of the atoms. Ethylbenzene, m-xylene, p-xylene, and o-xylene are a few isomers with the formula C8H10.The term "isomer" refers to molecules or polyatomic ions that have different configurations of atoms in space but the same number of atoms in their molecular formulas, or the number of atoms in each element. Isomerism is the presence or potential for isomers. Isomers may or may not have comparable chemical or physical properties.Isomerism results from the ability of atoms in a molecular formula to be organized in different ways, resulting in compounds with diverse physical and chemical properties. They number two.To learn more about isomers refers to:
brainly.com/question/26298707
#SPJ1
Dry ice is solid carbon dioxide that is used in the transport of food and medicine. dry ice becomes a gas at –78.5°c without becoming a liquid first. what change of state is being described?
The surface temperature of a block of solid carbon dioxide (dry ice) is -78.5 degrees Celsius (-109.8 degrees F). Once it reaches this temperature, carbon dioxide completely bypasses the liquid state and transforms into a gas. One pound of dry ice produces 250 liters of carbon dioxide gas!
Carbon dioxide in the form of dry ice is employed. Sublimation is the process by which CO2 transforms from a solid to a gas without first undergoing a liquid phase, and it takes place at pressures lower than 5.13 atm and temperatures higher than 56.4 °C (216.8 K; 69.5 °F) (the triple point).
When a substance changes immediately from a solid to a gas without melting beforehand. The carbon dioxide is still present; it simply passes.
Learn more about dry ice
brainly.com/question/13972158
#SPJ4
Answer:
Sublimation
Explanation:
C
How can you tell which metal is more reactive?
The reactivity of metals depends upon their position in the periodic table and their nature of undergoing chemical reactions.
The primary difference between metals is the ease with which they undergo chemical reactions. The elements toward the bottom left corner of the periodic table are the metals that are the most active in the sense of being the most reactive. Such as alkali metals like Lithium, sodium, and potassium all react with water, thus they are reactive in nature than the metals belonging to alkaline earth metals. The nature of more reactivity of alkali metals is due to larger atomic radius and low ionization energies and they have only one valence electron in its outermost shell.
Thus, the reactivity of metals depends upon their position in the periodic table and their nature of undergoing chemical reactions.
To learn more about metals check the link below:
https://brainly.com/question/4701542
#SPJ4
nitric acid, hno3, is classified as a strong acid in water. this means that it produces
nitric acid (HNO3) is classified as a strong acid in water, which means that it dissociates completely in water to produce hydrogen ions (H+) and nitrate ions (NO3-).
This is in contrast to weak acids, which only partially dissociate in water. Strong acids have a very low pH (typically less than 1) and are highly corrosive, making them useful for many industrial applications such as making fertilizers, explosives, and dyes. However, they can also be dangerous and must be handled with care. A strong acid is an acid that fully dissociates or ionizes in water, meaning it releases all of its hydrogen ions (H+) into solution. This makes the acid highly acidic and gives it a low pH (typically less than 1). Some examples of strong acids include hydrochloric acid (HCl), sulfuric acid (H2SO4), nitric acid (HNO3), and perchloric acid (HClO4). Strong acids are highly reactive and can cause chemical burns and other damage if not handled properly. \
Learn more about strong acid here:
https://brainly.com/question/12811944
#SPJ4
A 325 0 g piece of gold at 427 degree C is dropped into 200.OmL of water at 22 0 degree C. Calculate the final temperature of the mixture. Specific Heat of gold
The final temperature of the mixture is 218.1°C.
The Specific Heat of gold 0.0123 J.
What is specific heat ?Specific heat is known to be the amount of energy required to raise the temperature of a unit mass of a substance by 1 degree. It is a physical property of matter, usually expressed in units of Joules/Kilograms/Kelvin (J/kgK).
Mass of gold = 325 g
Heat absorbed by water = mass of gold x specific heat x temperature change
325 x 0.128 x 405
Heat absorbed by water = 154,400 J
Heat capacity of water = mass of water x specific heat
200 x 4.184
Heat capacity of water = 836.8 J/degree Celsius
Final temperature = (heat absorbed by water ÷ heat capacity of water) + Initial temperature
Final temperature = (154400 ÷ 836.8) + 22
Final temperature = 218.1°C
Q = mcΔT
836.8 J/°C = 325 × c × (427°C - 218.1°C)
836.8 J/°C = 325 × c × 208.9
c = 836.8/(325 × 208.9)
c = 836.8/67,892.5
c = 0.0123 J
To learn more specific heat
https://brainly.com/question/21041726
#SPJ4
1. An organ which receive the waste product carried by the blood.
4. It is a gas that the body needs.
6. It is a combination of hemoglobin and oxygen that enters the body.
7. The respiratory and digestive work as it absorbed
that being
distributed through the body.
10. The system responsible for digestion of food
Down:
2. The ability to maintain a relatively stable internal state that persist despite
changes in the world outside,
3. The respiratory and circulatory work together by exchanging of
5. The signal that circulatory system carries that control the speed of digestion.
8. The system responsible of exchange of gases
9. The system carries nutrients to the entire body cells.
1. Kidney receive the waste product carried by the blood.
2. Homeostasis is the ability to maintain a relatively stable internal state that persist despite changes in the world outside.
3. The respiratory system and circulatory system work together by exchanging of oxygen and carbon dioxide.
4. Oxygen is a gas that the body needs.
5. Chemical signals are carried out by circulatory system that control the speed of digestion.
6. Oxyhemoglobin is a combination of hemoglobin and oxygen that enters in the body.
7. The respiratory system and digestive system work as it absorbed oxygen that being distributed through the body.
8. The respiratory system is responsible for exchange of gases.
9. The circulatory system carries nutrients to the entire body cells.
10. The digestive system is responsible for food digestion.
Learn more about circulatory system visit:
brainly.com/question/29773718
#SPJ4
1. How much energy (in calories and in Joules) will it take to raise the temperature of 75.0 g
of water from 20.0 to 55.0 °C? ( Specific Heat = 1 cal / ( g °C) and 4.184 J /(g°C) )
A. 2630 cal and 630. J
B. 2630 cal and 1.1 x 104 J
C. 1.1 x 10 + cal and 2630 J
D. 630. cal and 2630 J
E. None of these are correct.
I need help pls