What is the difference between dynamic and active stretching?

Dynamic flexibility tests are not used as often as static flexibility tests because dynamic flexibility tests involve movement, while static flexibility tests are stationary.

Dynamic flexibility tests are more difficult to perform and require more coordination, and they can be less reliable than static flexibility tests. Additionally, dynamic flexibility tests require more time and equipment to administer, making them less practical for most fitness assessment settings.

Also, dynamic flexibility tests are more specific and measure the ability to perform a specific movement, rather than measuring the general range of motion of a joint. This makes them more suitable for testing athletes and those who need to measure their ability to perform specific movements.

Learn more about Dynamic flexibility :

https://brainly.com/question/1234108

#SPJ4

Answer:

F = G M m / R^2               or g = F/ m = G M / R^2

(A) A small high mass planet obviously fits the first description.

The magnitude of the torque will increase as the angle between the force and the line of action of the torque approaches 90 degrees.

Torque is a measure of the rotational force acting on an object and is defined as the product of the force and the distance from the axis of rotation to the point where the force is applied. The torque is also proportional to the sine of the angle between the force and the line of action of the torque.

When the angle between the force and the line of action of the torque is 0 degrees, the torque is zero, as the force is acting in the same direction as the line of action of the torque. As the angle increases, the torque increases and reaches its maximum value when the angle is 90 degrees, at this point the sine of the angle is 1, so the torque is at its maximum value.

In practical terms, if you imagine a door knob, when you push or pull the door knob closer to 90 degree angle with the door, it will be harder to open or close the door, than when you push or pull the door knob at a small angle.

To know more about Torque click below:

brainly.com/question/6855614#

#SPJ4

A human lifetime of 80 years is equal to 29,200,000 seconds.

The average human lifetime is typically 79 years, although this can vary greatly depending on various factors such as lifestyle, genetics, and environment. Generally, most people can expect to live anywhere from their late 60s to their mid-80s. However, some people live much longer, and some much shorter. Even within the same family, the range of lifespans can be quite varied.

This can be calculated by multiplying the number of seconds in a day (86,400) by the number of days in a year (365) by the number of years in a human lifetime (80).
86,400 x 365 x 80 = 29,200,000 seconds

To learn about more human lifetime.
https://brainly.com/question/11105393
#SPJ4

The cross-sectional area of a conductor is defined as the diameter of the conductor in mils, squared.

What is  conductor?

A conductor is a material or object that allows the flow of electric current. It is a material that has a large number of free electrons which can move freely between atoms, allowing for the current to flow through the material. Conductors can be either solid or liquid, and can be used to create electrical circuits and systems. Common conductors used in electrical systems include copper, aluminum, silver, and gold. These materials have high electrical conductivity, meaning they have low resistance and allow for large amounts of electric current to pass through them. Conductors are essential in many electronics and electrical devices, as they are responsible for carrying the electric current from one component to another.

To learn more about conductor

https://brainly.com/question/492289

#SPJ4

The momentum of the billiard balls after the collision is 3 Kgm/s.

Simply multiplying the mass of an object by its velocity results in momentum. Additionally, because momentum has both magnitude and direction, it qualifies as a vector quantity.

The formula provides momentum in mathematics;

The other pool balls' velocities would be zero (0) m/s because they were at rest (not experiencing any motion). If we substitute the values, we get: Total forward motion is 3 kg/s.

As a result, the billiard balls' post-collision momentum is 3 Kgm/s.

Therefore, The momentum of the billiard balls after the collision is 3 Kgm/s.

To learn more about Momentum, refer to the link:

https://brainly.com/question/24030570

#SPJ1

Answer:

The maximum amplitude of the resultant pulse would be 30 cm.

Explanation:

The maximum amplitude of the resultant pulse would be 30 cm.

The maximum amplitude of the resultant pulse would be the sum of the amplitudes of pulse A and pulse B, which is

20 cm + 10 cm = 30 cm.

This is because the maximum amplitude of the resultant pulse would occur when the two pulses are in phase, meaning they are both at their highest point at the same time.

When the two pulses are out of phase, their amplitudes will cancel each other out to some degree, resulting in a lower overall amplitude.

To learn more about Pulse:-

https://brainly.com/question/27205915?referrer=searchResults

https://brainly.com/question/16001036?referrer=searchResults

If the amplitude of pulse A is 20cm and that of pulse B is 10 cm, the maximum of the resultant pulse is 30 cm.

A sound wave's amplitude measures the height of the wave. When a sound is made, the maximum displacement of the medium's vibrating particles from their mean position determines the amplitude of the sound wave. It is the separation between the wave's crest or trough and its mean location.

The phenomenon of constructive interference occurs when two waves superimpose on each other in the same phase, with the resultant wave's amplitude being equal to the sum of the separate waves' amplitudes and producing the maximum amount of light.

The amplitude of pulse A is 20cm.

The amplitude of pulse B is 10cm.

Hence,  the maximum of the resultant pulse is = (20 cm + 10 cm) = 30 cm.

Learn more about amplitude here:

https://brainly.com/question/8662436

#SPJ2

Answer: The battery casing will explode

Explanation: Hydrogen gas will be released because of the heat which may cause an explosion.

Nonsense mutations are those point mutations in the DNA where stop codons will appear before the time they should appear.

At the time of transcribing from DNA to RNA, the template needs to have both start and stop codons for the transcription to occur correctly, but sometimes mutations can occur that do not allow the protein to be produced correctly. This mutation can be permanent which causes damage to the formation of proteins.Sometimes mutations can be beneficial, allowing evolution and helping organisms to be better formed for a new environment.

It is the type of mutation in which a termination codon occurs before the time it should be, instead of giving a codon with a certain amino acid. Which gives a much shorter protein than it should be, giving a non-functional protein.

To learn more about mutation visit: https://brainly.com/question/17130462

#SPJ1

The value of T when a particle is at rest is 0. The velocity of the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.

Velocity is the rate of change of velocity. At any point on a trajectory, the magnitude of the velocity is given by the rate of change of velocity in both magnitude and direction. Velocity of the body that we can consider is the increasing value of the velocity of any object at a constant rate and that of we can calculate. Hence by the primary information that we have we can formerly consider that the velocity which is acting on the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point and the value of T when a particle is at rest is zero.

Learn more about Velocity:

brainly.com/question/18084516

#SPJ4

The car's acceleration can be calculated as: a = v2/R = (18.0 m/s) 2/(12.0 m) = 27.0 m/s2. The conventional method can be used to determine net force: 13500 N is equal to Fnet = m•a = (500 kg)•(27.0 m/s2).

It may slow down or decelerate when traveling uphill or straight ahead. Roller coasters accelerate as they travel down hills due to the force of gravity dragging them downward.

Calculus and other fundamental mathematical concepts are used to calculate the maximum speed, the angles of ascent and descent, and the height necessary for the automobile to climb the next hill. The roller coaster's safety is further ensured by these calculations.

to know more about  velocity here:

brainly.com/question/18084516

#SPJ1

In ∑ F = m v^2r , both m and r are unknown but remain constant

Any force, or set of forces, can accelerate an object radially or centripetally. A few examples include the tension in a tether ball's rope, the gravitational pull of the Earth on the Moon, the friction between roller skates and a rink's floor, the force of a banked road on a car, and the forces on a centrifuge's tube.

A centripetal force is any net force that produces uniform circular motion. The centripetal force and centripetal acceleration both point in the direction of the centre of curvature. Newton's second equation of motion states that net force equals mass times acceleration, or net F = m a.

The centripetal acceleration—a = a c—determines the rate of acceleration for uniform circular motion.

Consequently, the size of

To be learn more about produces refer to:

https://brainly.com/question/30141735?referrer=searchResults

#SPJ1

The correct answer of the following statement is:

E) The uncertainty principle of quantum mechanics dictates that energy fields anywhere at location in space must be constantly fluctuating.

Quantum Mechanics is the branch of physics that deals with the behavior of matter and energy at the subatomic level. It explains the behavior of particles such as electrons, protons, and neutrons and how they interact with each other and with electromagnetic radiation. It also describes the behavior of matter on a macroscopic scale, such as the behavior of solids, liquids, and gases. Quantum Mechanics provides an understanding of the behavior of matter on the smallest scales, allowing us to understand the structure of the universe and its evolution over time.

To learn more about Quantum mechanics visit:

brainly.com/question/26095165

#SPJ1

The greater the mass of an object, the more particles there are in the sample and the more thermal energy it possesses at the same temperature. Assume you have some boiling hot water at 100 degrees Celsius to demonstrate this concept.

The energy contained inside a thermodynamic system is quantified as the quantity of energy required to get the system from its standard internal state to its current internal state of interest, accounting for energy gains and losses owing to changes in its internal state, including magnetization.  

It eliminates the kinetic energy of motion and the potential energy of the system's overall location in relation to its surroundings and external force fields.

Learn more about internal energy  to visit this link

https://brainly.com/question/11278589

#SPJ4

When the outer wall moves at a speed of 3.0 m/s, and an 83-kg person feels a 545-N force pressing against his back then the radius of a chamber is 8.5 meters.

The radius of the chamber can be calculated using the equation

F = mv²/r, where F is the force felt by the person, m is the mass of the person, v is the velocity of the chamber and r is the radius of the chamber. In this case, F is 545 N, m is 83 kg, and v is 3.0 m/s.

Plugging in these values, we get

r= mv²/F

r= 83×3²/545

r = 8.5 m.

Therefore, the radius of the chamber is 8.5 m.

Learn more about force:

https://brainly.com/question/25239010

#SPJ4

C. heat from radioactive decay.

Jupiter is a large gas giant and does not have a solid surface so the source of its heat is not from contraction or tidal heating.

Heat is generated from the radioactive decay of elements, such as uranium and thorium, in the interior of Jupiter which is the most likely explanation for the release of heat.

The heat released from the interior of Jupiter is believed to be generated from the radioactive decay of elements, such as uranium and thorium. These elements are naturally occurring, and their decay releases energy in the form of particles and radiation. This process produces the heat that is released from Jupiter's interior, which is why it is much hotter than the surrounding environment. The heat is also responsible for the hot spot that can be seen in Jupiter's atmosphere. It is estimated that the interior of Jupiter releases up to two and a half times more heat than it receives from the Sun. This process of radioactive decay is the most likely explanation for the release of such a large amount of heat from Jupiter's interior.

learn more about heat here

https://brainly.com/question/14515276

#SPJ4

The process of breaking of ice from the edge of the glaciers and then carried out to sea is known as calving.

Calving of glaciers is usually accompanied by a loud cracking sound or booming sound.

A huge glacier or polar ice that has broken off and floated into the sea is what creates an iceberg. The iceberg is composed of fresh water, just like the glaciers or ice in the North Pole. Since freshwater is less thick than salty seawater, icebergs float in the water.

When a rift develops in a glacier's margin as a result of ice melting, wind or water erosion, or other factors that make the glacier unstable, the calving process begins. A block eventually separates from the land, forming an iceberg that crashes into the water.

To know more about icebergs:

https://brainly.com/question/11430987

#SPJ4

Seasonal changes impact the environment. is There are only two factors that affect your environment.

Seasonal affective disorder, a clinically diagnosed syndrome, is believed to represent the morbid extreme of a spectrum of seasonality. Two types of seasonality have been clinically described: one characterized by a winter pattern and a second by a summer pattern of depressive mood disturbance.

Seasonality is a characteristic of a time series in which the data experiences regular and predictable changes that recur every calendar year. Any predictable fluctuation or pattern that recurs or repeats over a one-year period is said to be seasonal.

To know more about spectrum visit

https://brainly.com/question/6836691

#SPJ1

The magnitude of the net acceleration of the pillow is 3.333 m/s^2 .

To determine the magnitude of the net acceleration of the pillow, we can use Newton's Second Law of Motion, which states that the net force acting on an object is equal to the mass of the object multiplied by its acceleration:

Fnet = ma

where

Fnet = net force acting on the pillow

m = mass of the pillow (0.30 kg)

a = acceleration of the pillow

Fnet = FStephanie - FEileen = 10 N - 11 N = -1 N

So, the net force acting on the pillow is -1N

Now, we can use Newton's Second law to find the acceleration of the pillow

a = Fnet/m = -1 N / 0.3 kg = -3.333 m/s^2

Therefore, the magnitude of the net acceleration of the pillow is 3.333 m/s^2 .

To know more about Acceleration visit :

brainly.com/question/12550364

#SPJ4

The energy of the molecules in the ground increases in the given case when the temperature increases.

Convection and conduction are two ways that the Earth's heat is released.

Conduction takes place when the transferring of heat takes place from something hot to something cold.

On the other hand, convection takes place when the transferring of heat takes place by the movement of hot gases or liquids like water, air, or magma to a cooler region.  

Near the surface of the ground, the convection of heat water results in the hot springs and geysers to shoot up into the air through a hole in the ground.

To know more about temperature:

https://brainly.com/question/18271013

#SPJ4

Answer:

With an increase in temperature, the electrical conductivity of a pure metal decreases. This implies that the thermal conductivity of the pure metal shows little variance with an increase in temperature. However, a sharp decrease is observed when temperatures approach 0K

The efficiency of energy transfer from the arm to the baseball would be lower than the actual efficiency, as there was a higher initial velocity at release.

In order to answer this question, we must look at the experimental design and assess how air resistance would affect the scientists' computations. The ball's velocity would be reduced as it moved from the mound to home plate, where the velocity was measured, due to air resistance.

Therefore, the measured velocity ought to be lower than the release velocity. As a result of the baseball's predicted energy being lower due to the lowered velocity, the efficiency of the energy transfer from the arm to the ball will also be lower.

To know more about baseball:

https://brainly.com/question/9562240

#SPJ4

Divide the radius by the shear stress and the polar moment of inertia to find the shaft torque.

A device that measures shaft torque records the degree to which a shaft will twist in the presence of a specific amount of force. A shaft will twist less than one with a torque of 3 degrees than one with a torque of 5 degrees, and so on.

The rotating equivalent of force is torque. So an object will rotate with an angular acceleration in response to a net torque. A torque must be described about the rotational axis since every rotational motion has an axis of rotation. A torque is an applied force that rotates an object about its axis.

To know more about shaft torque visit:-

https://brainly.com/question/12873980

#SPJ4

"A notch is a distortion in a voltage waveform where the voltage quickly drops toward zero and then returns to the correct value."

In general, the primary overcurrent device is not considered to safeguard transformer secondary wires. Transformers with two windings are all isolation transformers.

A voltage waveform distortion known as notching is brought on by intense current bursts of very short duration. These distortions generally show up graphically as a notch in the waveform's time domain representation.

When current commutates from one phase to another during normal operation of power electronic devices, a sort of periodic waveform distortion called voltage notching is created. The most significant instance of voltage notching occurs in three-phase converters. The transition of the current from one phase to another causes the notches.

To know more about waveforms:

https://brainly.com/question/12274974

#SPJ4

You are standing on a moving bus, facing forward. You suddenly fall backward. You can imply from this that the bus's acceleration or speed has increased suddenly.

When the bus accelerates or speeds up suddenly, the inertia of your body causes you to fall backward. Inertia is the tendency of a body to resist changes in its state of motion. It is a basic principle of physics that states that an object in motion will remain in motion with the same speed and the same direction unless acted upon by an outside force. When the bus accelerates suddenly, the inertia of your body causes you to remain in the same position, while the bus moves forward. This results in you falling backward.

To know  more about acceleration  refer to the  link brainly.com/question/2303856

#SPJ4

Glands that excrete salt in the mangroves are examples of adaptions.

To learn more about population refer to:

https://brainly.com/question/25630111

#SPJ1

The minimum-size copper equipment grounding conductor required for the circuit is 1/0 kcmil.

Learn more about conductors here:

https://brainly.com/question/492289

#SPJ4

On prevent the puppies from tearing down the board, Ginger must apply 32 N of force to the opposite side.

The total force acting on the system is equal to the acceleration of the center of mass times the system's total mass. When applied to an extended object, Newton's second law, F = ma, predicts the motion of a specific reference point for this object.

The vector sum of all forces acting on an object is known as the net force. In other words, the net force is the sum of all the forces, taking into mind that a force is a vector and that two forces that have the same magnitude but facing the opposite direction will cancel each other out.

To learn more about force visit:

brainly.com/question/13191643

#SPJ4

Answer:

Explanation:

period is 2pi / B which is 2pi/8 which is 1/4 pi

amplitude is a which is 10