Answer:
i don't now
Explanation:
B-)o:-)(^^)(^^)❌❌✴️
Question 7 of 10
A scientist needs to study blood cells for medical research. Why might a
computer model benefit the scientist?
A. Using the model will give more accurate study results.
B. The model would enable the scientist to see what the flow of
blood cells would look like when slowed down.
C. The model can be adjusted until the scientist gets the desired
results.
D. The blood cell is too large to study, and the model is smaller.
SUBMIT
A computer model will benefit a scientist while studying the blood cells for medical research because that would enable the scientist to see how the flow of the blood cells will look like when it is slowed down.
What are blood cells?Our blood contains a number of blood cells which are suspended in a liquid which is known as plasma. Blood cells are the constituents of blood and are of different types like Red blood cells (RBCs), white blood cells (WBCs), Platelets etc. Plasma contains about 92% water and the most abundant solutes present in it are the plasma proteins and they include globulins, albumins etc.
Computer models help us to observe blood and its components and can provide us more insights and observation into the blood flow as we are able to slow it down as per our convenience.
Hence, option B is the correct answer.
To learn more about blood cells here
https://brainly.com/question/24468744
#SPJ2
calculate the speed of a train that is traveling west distances of 100 miles in 2 hours
a. 200m/h
b. 200m/h west
c. 50m/h
d. 50 m/h west
Answer:
d
Explanation:
The train will travel for 2 hours to travel a distance of 100 miles with a speed of 50m/h. Therefore, option (C) is correct.
What is the speed?The speed of a body is defined as the rate of change in the position of a body w.r.t. time.
Speed is a scalar parameter with both magnitude and no direction. A simple mathematical formula common way to determine speed.
S = d / t
where S is the speed, d is the distance moved by a body and t is the time.
Although the SI unit for speed is the same as velocity is m/s and can also be expressed in miles per hour (mph), and kilometers per hour (kph).
Given, the distance traveled by train, d = 100 miles
The time taken by train = 2 hrs
The speed of the train = distance/ time = 100/2 = 50m/h
Learn more about speed, here:
brainly.com/question/6280317
#SPJ2
How much force is needed to accelerate a 66 kg skier at 2 m/sec2
Answer:
132N
Explanation:
F=ma
F=66×2
F=132N
The answer is 132 N
The parameters given in the question are;
mass= 66 kg
acceleration= 2m/s
Therefore the force can be calculated as follows;
F= mass × acceleration
= 66 × 2
= 132
Hence the force needed is 132 N
Please see the link below for more information;
https://brainly.com/question/19847722?referrer=searchResults
The proton has a mass of?
what’s the name of the compound AgNO3
Answer:
Silver nitrate
Explanation:
A model of an atom shows eight electrons in rings that represent different energy levels. How many electrons are in each energy level? A.four in the first energy level, four in the second energy level. B.zero in the first energy level, eight in the second energy level C.two in the first energy level, six in the second energy level D.eight in the first energy level, zero in the second energy level
Answer:
The correct option is;
C. Two in the first energy level, six in the second energy level
Explanation:
The electrons in an atom are arrange in orbital shells which are situated at different levels within the structure of the, depending on the energy of the electron. Electrons with the least amount of energy are found in the shell closest to the nucleus of the atom which is the first energy level
The maximum number of electrons that can be found in a given an energy level is obtained with the following formula;
The number of electron = 2 × n²
Where;
n = The number of the different energy level
Therefore;
The maximum number of electrons in the first energy where n = 1 is given as follows;
The number of electron = 2 × 1² = 2 electrons
The maximum number of electrons in the second energy level where n = 2 is given as follows;
The number of electron = 2 × 2² = 8 electrons
Given that there are only 8 electrons in the atom, we therefore have, 2 electrons in the first energy level and the remaining 8 - 2 = 6 electrons in the second energy level.
importance of hydrocarbons
Answer:
The most important use of hydrocarbons is for fuel. Gasoline, natural gas, fuel oil, diesel fuel, jet fuel, coal, kerosene, and propane are just some of the commonly used hydrocarbon fuels. Hydrocarbons are also used to make things, including plastics and synthetic fabrics such as polyester.
Anyone else getting this
Answer:
yeeehhhhhh
Explanation:
basically my charger doesnt work
Which has more kinds of specialized cells, a tissue or an organ?
Answer:
An organ would have more kinds of specialized cells because it is made up of different tissues.
Materials expand when heated. Consider a metal rod of length L0 at temperature T0. If the temperature is changed by an amount ΔT, then the rod’s length changes by ΔL=αL0ΔT, where α is the thermal expansion coefficient.
For steel, α=1.24×10−5∘C−1.(a) A steel rod has length L0=40cm at T0=40∘C. What is its length at T=180∘C?
(Use decimal notation. Give your answer to three decimal places.)
L≈cm
(b) Find its length at T=90∘C if its length at T0=120∘C is 65 in.
(Use decimal notation. Give your answer to three decimal places.)
L≈ in.
(c) Express length L as a function of T and α if L0=60in. at T0=150∘C.
(Use symbolic notation and fractions where needed.) L(T,α)=
Answer:
(a) The length at temperature 180°C is 40.070 cm
(b) The length at temperature 90°C is 64.976 inches
(c) L(T, α) = 60·α·T - 9000·α + 60
Explanation:
(a) The given parameters are
The thermal expansion coefficient, α for steel = 1.24 × 10⁻⁵/°C
The initial length of the steel L₀ = 40 cm
The initial temperature, t₀ = 40°C
The length at temperature 180°C = L
Therefore, from the given relation, for change in length, ΔL, we have;
ΔL = α × L₀ × ΔT
The amount the temperature changed ΔT = 180°C - 40°C = 140°C
Therefore, the change in length, ΔL, is found as follows;
ΔL = α × L₀ × ΔT = 1.24 × 10⁻⁵/°C × 40 × 140°C = 0.07 cm
Therefore, L = L₀ + ΔL = 40 + 0.07 = 40.07 cm
The length at temperature 180°C = 40.07 cm
(b) Given that the length at T = 120°C is 65 in., we have;
The temperature at which the new length is sought = 90°C
The amount the temperature changed ΔT = 90°C - 120°C = -30°C
ΔL = α × L₀ × ΔT = 1.24 × 10⁻⁵/°C × 65 × -30°C = -0.024375 inches
The length, L at 90°C is therefore, L = L₀ + ΔL = 65 - 0.024375 = 64.976 in.
The length at temperature 90°C = 64.976 inches
(c) L = L₀ + ΔL = L₀ + α × L₀ × ΔT = L₀ + α × L₀ × (T - T₀)
Therefore;
L = 60 + α × 60 × (T - 150°C)
L = 60 + α × 60 × T - 9000 × α
L(T, α) = 60·α·T - 9000·α + 60
when an electric kettle containing cold water is switched on, the water in it starts boiling after a few minutes. what is the source of the heat energy of the boiling water?
What is the volume in cubic centimeters of a 500 mL beaker?
cm3
Answer:
500 cubic centimeters of water (cm3 - cc)
Explanation:
1 milliliter of water (ml) = 1.00 cubic centimeters of water (cm3 - cc)
The volume in cubic centimeters of a 500 mL beaker is 500 cubic centimeters of water (cm3 - cc)
What are measurement units?The two major units used to measure liquid volume are the liter and the milliliter. When measuring huge amounts of liquid, literal is utilized. Furthermore, ml is used to measure very small amounts of liquid.
Measurement units are the units I use to determine the size, number, or quantity of any object.
7 universally accepted basic units of measurement are utilized in daily life. These meters are the units of measurement used to measure distance. Second, used as a unit of measurement of time.
1 milliliter of water (ml) = 1.00 cubic centimeters of water (cm3 - cc).
Therefore, 500 cubic centimeters of water (cm3 - cc).
To learn more about measurement units, refer to the below link:
https://brainly.com/question/12629581
#SPJ2
Round each of the following measurements to the number of significant figures
indicated.
67,029 to three significant figures
0.15 to one significant figure
52.8005 to five significant figures
3.17497 to three significant figures
Answer:
a) 67000 b) 0.20 c) 52.8010 d) 3.17000
Explanation:
your welcome :)
a) 67000 b) 0.20 c) 52.8010 d) 3.17000 are the answers respectively.
What is measurement?Distance is a physical quantity which is measured in meter. If a man travel then it is measured in meters that defines that how much he travel from one point to another point for all these type of things we use to measure distance.
Centimeter is also a physical quantity which is use to measure distance. 1 centimeter is equal to 0.01 meter and 1 centimeter is equal to 0.00001 kilometer.the kilometer is large quantity to measure distance while centimeter is smaller quantity to measure distance.
Kilometer is also a physical quantity which use to measure the distance 1 kilometer is equal to 1000 mtr and 1 kilometer is equal to 100000 centimeter.
For above conclusion, we easily states that the kilometer is large quantity to measure distance while centimeter is smaller quantity to measure distance. Centimeter is also a physical quantity which is use to measure distance. 1 centimeter is equal to 0.01 meter and 1 centimeter is equal to 0.00001 kilometer.
Therefore, a) 67000 b) 0.20 c) 52.8010 d) 3.17000 are the answers respectively.
Learn more about measurement here:
https://brainly.com/question/2107310
#SPJ2
Use the periodic table to select the element that best fits each of the following descriptions.
Alkali metal:
aluminum
calcium
lithium
Answer:
Lithium
Explanation:
Using the periodic table, the selection of the element that best fits the following descriptions is lithium. The correct option is D.
What is a periodic table?A periodic table is a table that contains chemical elements in it. It is a tabular structure that displays elements according to their characteristics. It is used in chemistry and physics.
Lithium is an element that is present in the first row of the periodic table. The first row is called the alkali metals. Its atomic number is 3, and it is white and silvery.
Alkali metals are called alkali because they form alkalies reacting with water. Like lithium hydroxide. They are very strong bases. They are very reactive.
Thus, the correct option is D. lithium.
To learn more about the periodic table, refer to the link:
https://brainly.com/question/17061774
#SPJ6
Control group
Matching
Match the word to the definition Write the letter on the line
6. Scientific inquiry
А. This group shows the effect of the verable beng tested
7 Hypothesis
В. This is the one veriable thet is changed
8
C A welltested expleretion for expermental results
9 Expermertel group
D The many ways in which scientists study the natural world
10
Independent verable E A possible answer to a scientfic question
11
Dependent veriable
F This describes en observedpettern in nature
12 Scientific theory G This group is left alone end not experimented on
12 Scertfic low
H This is the veriable that gets messured
Identithin
Answer:
i also have to do this lol
Explanation:
I need help with these questions ASAP!!!
Answer:
a.) figure A.
b.) figure B.
Explanation:
in the physical change the mater stays in the two color groups there is still balance
in chemical change they seperate and break of into matching pairs
2-11 Ozone molecules are constantly formed and destroyed in the atmosphere. A
picture (cartoon) showing how ozone
molecules are formed is shown below.
0-0
2
A family member of yours who has never studied about this tries to understand
the cartoon pictures but is unable to understand it. He knows that there are no
such living forms in atmosphere but he is not able to understand names like 0,02
and O, and also the
process explained.
How would you explain it to that family member? State in your own words.
Answer:
The diagram shows oxygen, O₂, which consists of two atoms of oxygen in the stratosphere, which are the two beings holding hands, forming a couple being broken up by the intense ultraviolet radiation of the Sun, such that the couple closest to the Sun are the ones that were broken into two O, atoms.
After being broken, the two beings (oxygen atoms), become free to move as they please, making them able to move faster than when they were still a couple. However, due to the likeness for their fellow beings, each of the single O beings rushed to meet the other two still coupled O₂ beings, whereby one O being rushing to meet one O₂ couple each, to form O₃ which is a new group consisting of three beings holding hands known as Ozone
Note, that O stands for atomic oxygen gas
O₂ stands for oxygen gas
O₃ stands for ozone gas
Explanation:
The specific heat capacity of aluminum is 0.22 cal/g°C. How much energy needs to flow into 20.0 grams of aluminum to change its temperature by 15°C?
a) 0.017 cal
b) 0.29 cal
c) 66 cal
d) 1363 cal
*I NEED EXPLANATION, PLEASE*
Answer:
C) 66 calories
Explanation:
The Heat energy required to flow into a unit mass object to raise its temperature by 1 degree is known as specific heat capacity.
specific heat capacity of aluminum, c = 0.22 cal/g°C
mass of aluminium, m = 20.0 g
Put 6.93 x 10^5 into standard notation.
Answer:
693000
Explanation:
Multiplying anything by 10 must follow the base 10 system rules.
That means we can simply move the decimal 5 places to the right.
6.93 x 10⁵ = 693000
My answer to the question is 693000.
you have an object with mass of 86 g and volume of 10 cm^3 (cubed). calculate density, show your work, and identify which material you have from the list.
Answer:
8.6g/cm³ (BRASS)
Explanation:
Given the following :
Mass of object = 86g
Volume of object = 10cm³
The density of an object is calculated using the formula :
Density(g/cm³) = mass(g) / volume(cm³)
Inputting our values :
Density = 86g / 10cm³
Density = 8.6g/cm³
According to the table provided, the object which corresponds to having a density of 8.6g/cm³ is BRASS
1. The density of the material is 8.6 g/cm³.
2. The material is brass
Density is simply defined as the mass per unit volume of a substance i.e
Density = mass / volume 1. Determination of the density of the materialThe density of the material can be obtained as shown below
Mass = 86 g
Volume = 10 cm³
Density =?Density = mass / volume
Density = 86 / 10
Density = 8.6 g/cm³Therefore, the density of the material is 8.6 g/cm³
2. Determination of the material.From the calculation made above, the density of the material is 8.6 g/cm³.
Comparing the density of the material (i.e 8.6 g/cm³) with those
given in the table from the question, we can conclude that the
material is brass.
Learn more: https://brainly.com/question/24659113
Question 3
25 pts
If a can of soup contains 22.0 oz (ounces) of soup, how many grams of soup is that? (1 lb
= 16 oz, 1 lb = 454 g)
330 g
624 g
O 0.0485 g
Answer:
D
Explanation:
D
22/16*454≈624g
624g grams of soup is that, If a can of soup contains 22.0 oz (ounces) of soup. Hence, option C is correct.
What are ounces?1 ounce is equal to 437.5 grains or 28.349 grams.
Given :
A can of soup contains 22.0 oz (ounces) of soup.
16 oz = 1 lb
So, 22.0 oz is equal to [tex]\frac{1 X \;22.0}{16}[/tex]
=1.375 lb
And given that:
1 lb = 454 g
so, 1.375 lb = 1.375 X 454
624.25 =624g
Hence, 624g grams of soup is that, If a can of soup contains 22.0 oz (ounces) of soup.
Learn more about ounces here:
https://brainly.com/question/2284300
#SPJ2
The new element "Leo (L)" has three stable isotopes: L-82 (exact mass: 81.8735), L-85 (exact mass: 84.8322), and L-86
(exact mass: 85.6299). The relative abundances are 64.8%, 18.5%, and 16.7%, respectively. What is the average atomic
mass of element L?
Answer:
83.637562
Explanation:
What are some real life examples of revolution
Answer:
pick any example
Explanation:
the revolution of the Earth around the Sun
The period of revolution of the Earth around the Sun is equal to one year.
The Earth makes one revolution on its axis in about 24 hours.
This motor operates at a speed of 5,000 revolutions per minute.
Which statement correctly describes hydrogen bonds? Which statement correctly describes hydrogen bonds? They hold together adjacent water molecules. They form when opposite charges repel each other. They happen only between water molecules. They form between the hydrogen atoms of different water molecules.
Answer:
They form between the hydrogen atoms of different water molecules.
Explanation:
A hydrogen bond is always a dipole-dipole bond. It is an attraction between a slightly positive atom of a molecule with the negative atom of the another molecule containing hydrogen. Thus, in a water molecule, oxygen atom will attract the electrons in the O–H bonds. Its interaction always involves a hydrogen atom.
They form between the hydrogen atoms of different water molecules is the correct statement about hydrogen bonds.
A hydrogen bond refers to a kind of bond that occurs from the attraction between a hydrogen atom and a negatively charged oxygen, fluorine, or nitrogen atom.
This attraction, for its part, is known as a dipole-dipole interaction and links the positive pole of one molecule with the negative pole of another.
Oxygen is very electronegative, that is, it attracts electrons from the bond much more strongly than hydrogen.This dipole-dipole interaction between water molecules is known as hydrogen bond.Water molecules can form hydrogen bonds with other molecules.Therefore, we can conclude that they form between the hydrogen atoms of different water molecules is the correct statement about hydrogen bonds.
Learn more here: https://brainly.com/question/20813810
3) What is the weight of the ethyl alcohol that exactly fills a
200.0 mL container? The density of ethyl alcohol is 0.789
g/mL.
Answer:
158g
Explanation:
To calculate the "weight" (mass) of ethyl alcohol, we have to use this formula:
- Density will have units of gmL when dealing with a liquid or units of gcm3 when dealing with a solid.
The mass has units of grams, g.
The volume will have units of mL or cm3
We are given the density and volume, both of which have good units so all we have to do is rearrange the equation to solve for the mass:
density×volume=massvolume×volume
Density×Volume = Mass
0.789gmL×200.0mL
Thus, ethyl alcohol weighs 158g.
When setting up a conversion, where does the initial unit go in the conversion factor?
Answer:
All these conversion factors are equal to 1. If it doesn't seem obvious at first, think about it for a second. Realize that 1 minute is equivalent to 60 seconds. Simply replace 1 minute in the fraction with its equivalent 60 seconds and it becomes clear that 60 seconds / 60 seconds = 1. Numerator and denominator are equivalent; they are just expressed differently.
Explanation:
The initial unit cancels out and goes into the new unit
In science, we often need to convert from one unit to another to ensure accuracy of our calculations.
Let's say i want to convert 500 minutes to seconds.
The conversion factor is as follows;
60 seconds make 1 minute
x seconds make 500 minutes
x = 60 seconds * 500 minutes/1 minute
x = 30,000 seconds
Hence the initial unit which is "minutes" is canceled out and the new unit "seconds" remains.
https://brainly.com/question/8512113
What is true of neutrons?
Plz help me out ASAP!!
Conversion : J ➝ Cal
[tex]\bigstar\:\boxed{\bf{\purple{4.2\:Joule=1\:Cal}}}[/tex]
[tex]:\implies\sf\:3.5\times 10^6\:J[/tex]
[tex]:\implies\sf\:3.5\times 10^6\:J\times \dfrac{1\:Cal}{4.2\:J}[/tex]
[tex]:\implies\sf\:0.833\times 10^6\:Cal[/tex]
[tex]:\implies\bf\:8.33\times 10^5\:Cal[/tex]
What is the most important property of Group 0 gases? Elaborate.
Answer:
the group 0 elements, the noble glass. are all unreactive ,non-metal gases . they show trends in their physical properties.
Explanation:
their uses depend on their inertness.
Which is a good example of a contact force? A. protons in the nucleus of an atom B. a ball falling down after it's thrown up into the air C. a satellite orbiting Earth D. a bat hitting a ball
Answer:
B
Explanation:
Because a ball falling down is a good strong force
Correct Answer:
A ball hitting a bat