what is the energy, in j, of light that must be absorbed by a hydrogen atom to transition an electron from n

The egg would be found to float on the sea water which is denser but would tend to sink in the fresh water which is less dense.

The term salinity has to do with the amount of salt that is present. A solution is very saline if there is a high concentration of salt in the solution. We know that sea water has a greater density than water. The reason why the density of the sea water is greater than the density of the pure water is that the sea water contains dissolved salts.

Now, we know that given the fact that the sea water is denser than the fresh water, it is easier for an object to sink in the fresh water than it does in the sea water which is denser. This is even observed in ships as there is a greater tendency to remain afloat in sea water than in salt water.

Learn more about density:https://brainly.com/question/15164682

#SPJ1

The volume of 5.0 grams of gasoline which has a density of 0.70 g/ml is 7.14m3

Petroleum-derived clear flammable liquid known as gasoline or petrol is the main fuel for the majority of spark-ignited internal combustion engines. It mostly comprises of organic compounds made from petroleum fractional distillation that have been improved with various additions.

Density is the measurement of how tightly a material is packed together. It is defined as the mass per unit volume.

Acc. to the given data

mass of gasoline = 5.0 g

density of gasoline=0.70g/ml

now to find the volume we use the following formula

V=m/p

V= 5.0/0.70

V=7.14m3

Hence, the volume of 5.0 grams of gasoline which has a density of 0.70 g/ml is 7.14m3

To know more about Gasoline visit

https://brainly.com/question/28762820

#SPJ1

Maximum mass of water produced from the chemical reaction is calculated to be 58.46 gram.

Chemical reaction is a process where one or more substances that is the reactants are converted to one or more different substances that is the products.

2C₆H₁₄  + 19O₂ --> 12CO₂ + 14H₂O

Stoichiometry of hexane to oxygen--> 2:19

number of moles hexane = 40 g / 86.2 g/mol = 0.464 mol

number of moles of oxygen =88.6 g / 32 g/mol = 2.76 mol

If we consider hexane is limiting reactant,

As, 2 moles of hexane reacts with 19 mol of oxygen

therefore, 19/2 x 0.464 = 4.408 mol

As 4.408mol of oxygen is present, which implies O₂ is in excess and therefore hexane is the limiting reactant.

stoichiometry of hexane to water --> 2:14

2 mol of hexane will give 14 mol of water

therefore, 14/2 x 0.464 = 3.248mol

mass of water formed is 3.248 mol x 18.0 g/mol

= 58.46 gram

To know more about chemical reaction, refer

https://brainly.com/question/11231920

#SPJ4

The molecular formula of the compound is C2br2.

Ideal gas law , PV=nRT

      Here, p= 1.10 atm

                v= 10.0ml

                R=8.31m3pa/kmol

                 t=292.0k

                 n=0.08439g

Now, the atomic weight of C = 13.068/12.010= 1.08802

         The atomic weight of Br= 86.932/79.904= 1.0879

Atomic weight is the mass of one atom of an element.

The ratio of c and Br is 1.08802/1.0879= 1/1.This is close to a 1:1 ratio.

Molar mass of the compound is the mass of the sample of the compound  divided by the amount of the substance.

The molar mass of CBr is 91.9147.

So, using  all the expressions we knew that the molecular formula of compound is C2Br2.

Molecular formula is the number of atoms in one molecule of a compound.ideal gas law relates the macroscopic properties of ideal gases.it describe the behaviour and properties of the gas.

To learn more about ideal gas law please visit:

https://brainly.com/question/15132707

#SPJ4

2.67 L volume is occupied by 0.105 mol of helium gas at a pressure of 0.95 atm and a temperature of 295 k

Volume is defined as the space occupied within the boundaries of an object in three-dimensional space

Here given data is

Pressure = 0.95 atm

Temprature =  295 k

Number of mole of He gas =  0.105 mol

R = 0.0821 L.atm.K⁻¹mol⁻¹ = gas constant

We have to calculate volume = ?

So according to the ideal gas equation

PV = nRT

V = nRT/P

V = 0.105 mol × 0.0821 L.atm.K⁻¹mol⁻¹ × 295 k/0.95 atm

V = 2.67 L

Know more about helium gas

https://brainly.com/question/11616846

#SPJ4

The activity coefficient of the given solution would be 0.85

What is activity coefficient in thermodynamics?

Activity coefficient is a major factor in the area of thermodynamics, it can be used to account for any deviations such as in the case of substances or chemical mixture.

If the solution is ideal then activity coefficient of  glucose can be calculated in the following manner :

a = 0.66 k / Kf = 0.355 mol/kg

The molality of the solution is

m = 73 gm X  1mol / 180.16 g / 966 X 10-3kg = 0.419 mol/kg

The activity coefficient is y = a / n

                                         y = 0.3555 mol/kg / 0.419 mol/kg = 0.85

This is how we can determine the activity coefficient.

To know more about Activity Coefficient from the given link

https://brainly.com/question/16416932

#SPJ4

The electrostatic interactions between salt water molecules are stronger than those between salt water molecules because the boiling point of salt water is higher than that of fresh water.

The electrostatic force is made up of electrically charged particles that exhibit both an attractive and a repulsive behavior. It is additionally called Columb's force. Charles-Augustin de Coulomb, a French scientist, would be honored by having the Columb attraction bear his name. However, electrostatic force is one of the four fundamental forces of nature. Electrostatics is the analysis of electric charges when they are at rest.

Examples of electrostatic forces include running a piece of paper through our hair while using a comb to create an electrostatic field. When one balloon is brushed with hair, the other balloon becomes drawn to it.

In general, the intensity of the electrostatic interactions between the molecules in either type of water can be gauged from the boiling temperatures of various substances. We will quickly discover that salt water has a boiling point that is significantly higher than those of fresh water, showing that the electrostatic interactions between salt water molecules are stronger than those between fresh water molecules.

To know more about Electrostatic Force visit:

https://brainly.com/question/9836161

#SPJ1

Because there is so much empty space between the gas particles, most of a gas' volume is made up of compressible gas molecules, Hence option c is correct. i.e, Its particles are spread far apart.

The greater compressible nature of gases compared to liquids or solids is explained by the kinetic-molecular hypothesis. The average distance between the gas molecules at standard pressure and room temperature is roughly 10 times the diameter of the molecules.  Gas particles are pushed closer together when a gas is compressed, such as when the diving tank is then being filled.

There are various uses for compressed gases. Patients with damaged lungs are frequently given oxygen in hospitals to help them breathe better. When a patient is having a major procedure, a compressed gas is usually used to give anesthetic. 

To know more about compressibility of a gas, please refer:

https://brainly.com/question/1307771

#SPJ1

The energy of the metal d orbitals distributing a charge of −6 due to an increase in electrostatic repulsion.

What is crystal field theory?

The ability of transition metals to form complexes is a key property. A complex is made up of a core metal atom or ion surrounded by a number of ligands. Crystal field theory governs the interaction of these ligands with the core metal atom or ion.

Crystal field theory was developed in 1929 and treats the interaction between metal ion and ligand as a purely electrostatic phenomena, with the ligands seen as point charges in the region of the central atom's atomic orbitals. Crystal field theory was developed and extended to account for the partly covalent character of bonding between ligands and metal atoms, primarily through the application of molecular orbital theory.

To accurately grasp the crystal field interactions in transition metal complexes, knowledge of the geometrical or spatial distribution of d orbitals is required. In a free gaseous metal ion, the d-orbitals are fivefold degenerate. If a spherically symmetric field of negative ligand filled charge is imposed on a central metal ion, the d-orbitals remain degenerate but the energy of the free ion changes.

Learn more about crystal field theory from given link

https://brainly.com/question/29389010

#SPJ4

Water dissolves crystalline table salt (nacl). because there are more particles, entropy —-select—-. (Choice A).

When a neutral atmosphere is required, argon is frequently employed. In this manner, titanium as well as other reactive elements are produced. Additionally, it is used in incandescent bulbs to prevent oxygen from disintegrating the filament and by welders can protect the weld region.

Higher concentrations might result in nausea, vomiting, disorientation, coma, and even death. For argon, no occupational exposure levels have been set. But there might be a health risk involved. Always adhere to safe work procedures.

To know more about Argon visit:

https://brainly.com/question/133359

#SPJ4

If a reaction occurs between K₂2CO₃ and Cu(NO₃)₂ and the equation is properly balanced with the smallest whole-number coefficients, the sum of the coefficients of the reactants and products will be 5.

The reaction between K₂2CO₃ and Cu(NO₃)₂ is represented by the following chemical equation:

K₂2CO₃ and Cu(NO₃)₂ = CuCO₃ + KNO₃

However, the above equation is yet to be balanced. A balanced equation will have the same number of atoms of different elements in the reactants and in the products. The balanced version of the equation is written as:

Cu(NO₃)₂ + K₂CO₃ = --- CuCO₃ + 2KNO₃

The reactants/products with their respective coefficients are as follows:[Cu(NO₃)₂ - 1K₂CO₃ - 1[CuCO₃] - 1[KNO₃ - 2

Thus, the sum of all the coefficients for reactants and products will be:

1 + 1 + 1 + 2 = 5

In other words, if a reaction occurs between K₂CO₃ and Cu(NO₃)₂ and the equation is properly balanced with the smallest whole-number coefficients, the sum of the coefficients of the reactants and products is 5.

More on balancing chemical equations on:

https://brainly.com/question/28294176

#SPJ1

A series of nuclear events that transform four protons into the helium nucleus, two positrons, and two neutrinos result in the fusion of hydrogen into helium.

Transformation of one element into another, typically with the emission of additional particles and energy.

There are four types decay as follows;

Beta Decay 2 neutrons and 2 protons were lost. Atomic mass decreases by 4, atomic number decreases by 2.

Alpha Decay A proton is created from one neutron. Atomic number increased by 1.

Particle Emission One proton transforms into a neutron.

Beta Decay A nucleus with a high energy output emits energy and stabilizes.

When two nuclei join together to form one atom, fusion processes take place. Two hydrogen atoms are fused together to create helium in the sun's reaction.

Thus, a series of nuclear events that transform four protons into the helium nucleus, two positrons, and two neutrinos result in the fusion of hydrogen into helium.

To learn more about decay follow the link below;

https://brainly.com/question/1528332

#SPJ1

Answer: Li3N + 3 NH4NO3 → 3 LiNO3 + (NH4)3N

Explanation:

This is a type of double displacement reaction.

Here, on the reactant side, we have 3 Li, 1 N, 1 NH4, and 1 NO3.

On the product side, we have 1 Li, 1 N, 3 NH4, and 1 NO3.

To balance the two sides, we have to equal the number of atoms of Li and NO4. Thus, we get:

⇒ Li3N + 3 NH4NO3 → 3 LiNO3 + (NH4)3N

The principle quantum number, n indicates the principal energy level.

The angular quantum number, l indicates the shape of orbital in space

The magnetic quantum number, m indicates the sublevel of the orbital

The relative size of the orbital is related to the value of quantum number n

The shape of orbital is related to the value of so the quantum magnetic number l.

To know more about quantum numbers

brainly.com/question/16977590

#SPJ4

The octet rule refers to the tendency of atoms to prefer to have eight electrons in the valence shell.

There are three violations to the octet rule are odd-electron molecules, electron-deficient molecules, and expanded valence shell molecules.

The octet rule refers to the tendency of atoms to favor to have eight electrons within the valence shell. while atoms have fewer than eight electrons, they tend to react and form greater solid compounds.

The octet rule refers to an crucial precept that the atoms which have bonded percentage eight outer electrons. This honestly method that the atom's valence shell has a resemblance with a noble gas. The octet rule states that the atoms like to have 8 electrons most effective of their complete outer shells.

Learn more about octet rule here:- https://brainly.com/question/865531

#SPJ4

Disclaimer:- Your question is incomplete,please see below for the complete question.

H : Cl

A. This structure is correct due to the total number of bonds and electrons.

B. this structure is incorrect due to the total number of electrons for the involved atoms.

C. this structure is correct due to allowed exceptions to the octet rule for the involved atoms.

D. this structure is incorrect because the octet rule is not fulfilled for all the atoms.

66 infrared photons of frequency 3.38 x 1013 hz would need to be absorbed simultaneously by a tightly bound molecule to break it apart.

What is binding energy?

Binding energy is a required amount of energy that disperses the other particles of the reaction system. It measures the energy needed to free an electron or a subatomic particle.

Binding energy is the ionization energy that depicts how much energy will be needed if an electron has to be removed from an atom for a reaction to occur.

It can be said that the energy required to free an electron from the orbit of the atom is measured in electron volt (eV). It is a little different from ionization energy as binding energy can remove any subatomic particle and not just an electron.

Energy of a photon of frequency v is given by the relation

E = hv

where h has the value 6.63 x 10-34

from this relation the energy of our photon of frequency 3.66 × 1013 Hz is E = 6.63 x 10-34 x 3.66 x 1013 2.42658 × 10-20

Binding energy is the minimum energy required to break the bond which in our case is 10 x 1.6 x 10-19 1.6 x 10-187

so the total number of photons that are required to break the bond are

1.6 x 10-18 2.42658 x 10-20

n = 65.9364

n= 66

Learn more about binding energy from given link

https://brainly.com/question/23020604

#SPJ4

Currently, it is being treated with hcl, and 18.5 ml of SCL will be required to treat the tribulation. Additionally, 0.1 Molar is provided to us as the Excel solution's modularity. We must now ascertain the energy concentration that was ingested into the beaker.

Therefore, we shall use the following formula: concentration times volume equals the concentration of HCL times volume. In order to get the answer, we will now substitute all the values. This applies to any that mentions "sparks at cl" Therefore, the quantity to be determined is 100 ml, which is equivalent to 18.5 times 0.1 molar. then from here Any initially present substance has a concentration of 0.0185. Thus, this is the solution.

Subtract the solute's mass from the solution's overall volume. C = m/V, where m is the solute's mass and V is the entire volume of the solution, should be written down. Input the mass and volume data you discovered and divide them to determine the concentration of your solution.

The amount of solute that has been dissolved in a specific volume of solvent or solution is measured by the solution's concentration. A solution that contains a significant amount of dissolved solute is said to be concentrated. A solution is said to be dilute if it only contains a little amount of dissolved solute.

To know more about Concentration please click here :  https://brainly.com/question/17206790

#SPJ4

rank the members of each compound in order of increasing ionic character of their bonds: SeF₄ , TeF₄, BrF₃. arrange compounds as low ionic character < high ionic character are :  BrF₃ <  SeF₄ < TeF₄.

The polarity between the atoms depends on the electronegativity difference. The more the difference in the electronegativity of atoms more the polarity of the atoms. the greater the polarity or the electronegativity between the atoms more will be the ionic character.

Thus, rank the members of each compound in order of increasing ionic character of their bonds: SeF₄ , TeF₄, BrF₃. arrange compounds as low ionic character < high ionic character are :  BrF₃ <  SeF₄ < TeF₄.

To learn more about ionic character here

https://brainly.com/question/14346523

#SPJ4

Energy is used to increase the kinetic energy of the molecules. So its temperature will not rise, since kinetic energy of molecules remains the same.

Because the energy involved in a phase changes is used to interrupt bonds, there is no growth in the kinetic energies of the particles, and therefore no rise in temperature. Similarly, electricity is needed to vaporize a liquid to overcome the attractive forces among debris within the liquid.

During segment trade, the energy supplied is used simplest to split the molecules ; no part of it's far used to boom the kinetic strength of the molecules. So its temperature will now not upward thrust, for the reason that kinetic energy of molecules remains the identical.

Materials can change phase often due to a temperature change. At low temperatures, maximum substances are solid; as the temperature increases, they grow to be liquid; at higher temperatures nevertheless, they end up gaseous.

Learn more about kinetic energy here:- https://brainly.com/question/23342716

#SPJ4

Bi3+(aq) + 3H2O(l) --> BiO​​​​3-(aq) + 6H+(aq) + 2e is balanced half-reaction for the oxidation of bismuth ion to bismuth oxide ion in acidic aqueous solution.

What is balanced half reaction?

Half-reactions are another way for balancing redox reactions. Remember that a half-reaction is the oxidation or reduction that occurs and is treated individually. When the chemicals in the reaction are in aqueous solution, the half-reaction approach performs better than the oxidation-number method. Because the aqueous solution is usually acidic or basic, hydrogen ions or hydroxide ions are present.

In general, the half-reactions are first balanced separately by atoms. The half-reactions contain electrons. The amount of electrons lost is then balanced to equal the number of electrons acquired. Finally, the two half-reactions are combined. The oxidation of Fe2+ ions to Fe3+ ions in acidic solution by dichromate (Cr2O27) is an example. The dichromate ions are converted to Cr3.

i3+ --> BiO3-

First balance O with H2O and H with H+ ion.

Bi3+ + 3H2O --> BiO3- + 6H+

Now balance charge with e- and after this you will get balanced half equation in acidic medium is--

Bi3+(aq) + 3H2O(l) --> BiO​​​​3-(aq) + 6H+(aq) + 2e

Lean more about half oxidation reaction from given link

https://brainly.com/question/23029816

#SPJ4

The mass of 2.1 × 10²³ molecules of H₂O₂ have 11.86 g.

given that :

mass of the molecules : 2.1 × 10²³  molecules

mass of the H₂O₂ = (number of molecules / Avogadro's number) × molar

                                                                                                                 mass

molar mass of H₂O₂ = 34.015 g/mol

Avogadro's number = 6.022 × 10²³

mass of the H₂O₂ = (number of molecules / Avogadro's number) × molar

                                                                                                                 mass

                               =  ( 2.1 × 10²³ / 6.022 × 10²³ ) × 34.015

                              = 11.86 g

so the mass of H₂O₂ is 11.86 g.

Thus, The mass of 2.1 × 10²³ molecules of H₂O₂ have 11.86 g.

To learn more about  Avogadro's number here

https://brainly.com/question/28812626

#SPJ1

The following statements that are true about electron dot structures and valence electron include the following below:

This is referred to as a subatomic particle which has a negative charge and is involved in chemical reactions.

Atoms can gain and lose electrons so as to attain a stable octet configuration which is therefore the reason why stable atoms will always have eight valence electron and a full outer shell.

Read more about Electron here https://brainly.com/question/26084288

#SPJ1

Bond order refers to how many electron pairs there are in a bond between two atoms. A single bond, a double bond, a triple bond, a quadruple bond, and so on have a bond order of one in a covalent bond between two atoms.

Bond order is determined by the ratio of bonding to antibonding electrons, so for NO+, the bond order is (8 - 2)/2 = 6/2 = 3, or a triple bond.

Bond order for NO⁺ is (8-3)/2 = 5 / 2 = 2.5, which is a partial double bond. Bond order for NO⁻ is (8-4)/2 = 4/2 = 2, which is a double bond.

The quantity of electron pairs between two atoms is the bond order itself. The bond order between the two nitrogen atoms in diatomic nitrogen, for instance, is 3.

For NO⁻ and NO+, determine the bond order.

To know more about bond order, click on the link below:

https://brainly.com/question/9713842

#SPJ4

The components of a solution are solute and solvent, such as solute is the substance that is being dissolved, whereas the solvent is the dissolving medium.

Polar solvents dissolve polar solutes and similarly non-polar solvents dissolve non-polar solutes. Water is a polar solvent and it dissolves salts and other polar molecules but not non-polar molecules such as oil.

a) Ethanol is soluble in both water and hexane.

b) benzene, carbon dioxide, and tetrachloromethane will be soluble in octane since these compounds are nonpolar.

c)Solubility of potassium chloride is maximum in water. Potassium chloride is an ionic solid and water is a polar solvent.

d)Hydrogen peroxide is soluble in water which is a polar.

To know more about polar and non polar solvents, refer

https://brainly.com/question/3184550

#SPJ4

Nitrogen has five valence electrons, among the following electron configurations (image attached) option (a) represents the ground state for nitrogen.

The atomic number of nitrogen is seven, so the electronic configuration of nitrogen is as:

    1s² 2s² 2p³

Electrons present in 2s and 2p are valence electrons, so the total number of valence electrons is 5. In the outer orbitals, 2s accommodates 2 electrons in the ground state. As we can see that only options (a) (d) and (e) have 2 electrons in 2s, so we consider these as the correct option. Option (d) is also wrong because it consists of outer electrons but the nitrogen has 5 outer electrons. Option (e) is also wrong because it has 6 outer electrons. So the only correct option is (a) having 5 outer electrons 2 in 2s and 3 in 2p.

You can also learn about electronic configurations from the following question:

https://brainly.com/question/14283892

#SPJ4

The three primary constraints that project managers should be familiar with are time, scope, and cost.

What are some examples of constraints?

What are the 4 common types of constraints facing services?

What types of situational restrictions are there?

What are some instances of societal restrictions?

To know more about constraints, checkout this link:

https://brainly.com/question/26441667

#SPJ1

When two objects collide, a force is exerted on each object. the two forces are exerted in opposite directions, but they are in different strength.

Force is defined as the physical strength.

By Newton's first law of motion,

A body moving or in rest remains in motion or in rest until or unless no external force exertes on the body.

By newton second law of motion,

the force is directly proportional to the rate of change of momentum.

Mathematically,

F = ma

When a body collide and move backward or change it's path by exerting some amount of force. The force which is exerted on the body is always opposite due to which they move backward.

Thus, we concluded that when two objects collide, a force is exerted on each object. the two forces are exerted in opposite directions, but they are in different strength.

Learn more about force:

https://brainly.com/question/13014979

#SPJ1

False

According to Newton's Second Law of Motion, the net force on an object is equal to the product of its mass

(M) and acceleration (A)

.

That is: F(net)= M×A

If the net force on the object is zero, the acceleration of the object is also zero.

However, this does not mean that the object is in rest. It means that the object will continue to maintain its state of rest or uniform motion, according to Newton's first law of motion. If the object was moving, it will continue to move with a constant velocity.

Hence, the statement is false.

Answer:Chemical reactions that release energy are called exothermic. In exothermic reactions, more energy is released when the bonds are formed in the products than is used to break the bonds in the reactants. Chemical reactions that absorb (or use) energy are called endothermic.

Explanation:

10) In the given reaction,

4NH₃+5O₂→4NO+6H₂O

The mol to mol ratio of O₂ to NO is 5 mole O₂/4 mole NO.

A mol to mol ratio is defined as the ratio between the amounts in moles of any two compounds, which is involved in a balanced chemical reaction. For example in the given reaction

NaOH+HCl→NaCl+H₂O

The mol to mol ratio between NaOH and HCl is 1:1, as we consider the coefficients present in the reaction for mol to mol ratio.

To calculate the mol to mol ratio, we need to balance the given chemical reaction. The reaction 4NH3 +50₂→4NO+6H₂O is balanced, and coefficient for O₂ is 5. The coefficient for NO is 4. Hence mol to mol ratio of O₂ to NO is 5:4.

Therefore, the mol to mol ratio of O₂ to NO is 5 mole O₂/4 mole NO.

To know more about mol to mol ratio

https://brainly.com/question/19553297

#SPJ1