Answer:
Hey there! The nuclear symbol for an ion with a charge of +220 protons and 24 neutrons would be written as follows:
220+ 24
The symbol consists of two parts: the atomic number (220+) and the atomic mass (24). The atomic number is the number of protons in the nucleus of an atom, and it is represented by a superscript on the left side of the symbol. The atomic mass is the total number of protons and neutrons in the nucleus, and it is represented by a subscript on the right side of the symbol.
In this case, the atomic number of the ion is 220, which indicates that it has 220 protons in its nucleus. The atomic mass is 24, which indicates that it has a total of 220 protons + 24 neutrons = 244 particles in its nucleus.
________________________________________________________
How do we represent the properties of atoms and ions using nuclear symbols?Nuclear symbols are a way of writing down the important information about atoms and ions in a short and easy-to-read format. They usually consist of two parts: the atomic number and the atomic mass. The atomic number tells us how many protons an atom has in its nucleus, and the atomic mass tells us the total number of protons and neutrons. For example, the nuclear symbol for carbon is 6 12C, which tells us that carbon has 6 protons and 12 particles (6 protons + 6 neutrons) in its nucleus.
How do we determine the number of protons, neutrons, and electrons in an atom or ion?To determine the number of protons in an atom or ion, we can look at its atomic number, which is usually written as a superscript on the left side of the nuclear symbol. For example, if the nuclear symbol for an atom or ion is written as 6 12C, we can tell that it has 6 protons. To determine the number of neutrons, we can subtract the atomic number from the atomic mass. For example, if the atomic mass is 12 and the atomic number is 6, then the number of neutrons is 12 - 6 = 6. To determine the number of electrons, we can just look at the overall charge of the atom or ion. If it is neutral, then it will have the same number of protons and electrons. If it is positive or negative, then it will have more or fewer electrons than protons, respectively.
What are the six physical properties associated with hazard recognition of hazardous materials/chemicals
The six physical properties associated with hazard recognition of hazardous materials/chemicals are Flammability, Reactivity, Toxicity, Corrosivity, Physical hazards, Health hazards are explained below with details.
1. Flammability: The ability of a material to catch fire and burn easily.
2. Reactivity: The ability of a material to chemically react with other materials, including the potential for explosions or release of toxic gases.
3. Toxicity: The ability of a material to cause harm or death when ingested, inhaled, or absorbed through the skin.
4. Corrosivity: The ability of a material to eat away at or damage other materials, including metals and human tissue.
5. Physical hazards: The potential of a material to cause harm through physical means, such as pressure, impact, or friction.
6. Health hazards: The potential of a material to cause harm to human health, including acute and chronic effects.
These are the six physical properties associated with hazard recognition of hazardous material.
To know more about physical properties please refer: https://brainly.com/question/1935242
#SPJ4
Organic compounds form the basis of?
Answer:
1. carbon
Explanation:
carbon atoms bound to one another and other atoms by covalent bonds and found in the cells of living organisms. Hydrogen, oxygen and nitrogen are typical elements which, in addition to carbon, make up organic compounds.
how to separate soluble,insoluble and insoluble mixture
By the process of evaporation
Which of the following molecules act as building blocks (monomers) of polypeptides?
A) 1, 4, and 6
B) 2, 7, and 8
C) 7, 8, and 13
D) 11, 12, and 13
E) 12, 13, and 15
B) 2, 7, and 8 of the following molecules act as building blocks (monomers) of polypeptides.
Are polypeptides' building components proteins?You may think of it as several flavors that come together to form lengthy chains that we refer to as polypeptides, which are the fundamental components of proteins.
What types of bonds do polypeptides contain?Peptide bonds bind the amino acids together in polypeptides. The interaction between the -carboxyl and -amino groups of two amino acids results in the formation of a dipeptide.
learn more about polypeptides
https://brainly.com/question/11136648
#SPJ4
Diatomic elements are important. what makes them different from other elemental substances?
Diatomic elements are molecules composed of two atoms of the same element covalently bonded together, as opposed to other elements which are composed of only one atom.
What is diatomic?Diatomic elements are those elements that exist in nature as molecules made up of two atoms. Examples of diatomic elements include oxygen (O2), hydrogen (H2), nitrogen (N2), fluorine (F2), chlorine (Cl2), and iodine (I2). These elements are the only elements that exist naturally as diatomic molecules.
This gives diatomic elements distinct properties compared to other elemental substances, such as having two different electron configurations, and having different spin states. Diatomic elements also have properties that are unique to them, such as having different boiling points, higher densities, and different reactivity. Additionally, diatomic elements are essential for life as many are used in crucial biochemical processes.
To know more about Diatomic elements click-
https://brainly.com/question/29078214
#SPJ4
name a solid that when burnt colourless gases are formed.One gas is strongly acidic while the other is slightly basic
Sulfur is a solid that when burnt produces two colourless gases: sulfur dioxide (SO2) and sulfur trioxide (SO3). The gas SO2 is strongly acidic, while the gas SO3 is slightly basic. When SO3 is dissolved in water, it forms a solution called sulfuric acid, which is a strong acid. SO2 is also a corrosive gas that can be harmful to humans and the environment. It is often produced as a byproduct of industrial processes, such as the burning of fossil fuels and the production of sulfuric acid.
Hope This Helps You!
What can help overcome a positive enthalpy of solution and allow a solid solute to dissolve in water
New ion-dipole or dipole-dipole attractions take effect if the solute is an ion or polar molecule on its own.
When things go well, they could release enough potential energy to partially offset the energy needed to integrate the solute into the structure. Ammonia dissolving in water is a striking illustration of this. Solution's enthalpy. A solution is a uniform combination of two or more components that can exist in the solid, liquid, or gas phases. The amount of heat that is emitted or absorbed during the dissolving process is known as the enthalpy change of solution (at constant pressure).The solvent molecules begin to dissociate as a result. This process' enthalpy is referred to as. Since energy is needed to break the contact between the B molecules, this reaction, like the first, is always endothermic (). Let's try to picture what has transpired up to this point.
To learn more about polar molecule please click on below link
https://brainly.com/question/15173422
#SPJ4
In the last minute rush to assemble the demonstration, your teacher spills the lead chloride all over their sandwich and is left with 57.2 grams in the bottle. How much potassium iodide should be weighed out to convert all of the lead chloride to product?
Answer: Magnesium is being oxidized, and the chloride ion is being reduced. ... solutions of the reactants lead(II) nitrate and potassium iodide.
Explanation:
Find Delta S for the formation of 1 mole of PCl5(g) from its elements.
____ J/K
Answer:
I don't know I am sorry
List all the possible types of bonding for oxygen
Two covalent bonds are formed by oxygen to complete their octet.
What are covalent bonds?An electron exchange that results in the formation of electron pairs between atoms is known as a covalent bond. Bonding pairs or sharing pairs are the names given to these electron pairs. Covalent bonding is the stable equilibrium of the attractive and repulsive forces between atoms when they share electrons.
What is an octet?In chemistry, an octet is an arrangement of eight electrons in the outer electron shell of a noble gas atom. The relative inertness of noble gases and the chemical behaviour of several other elements are attributed to this structure.
What is oxygen?The chemical element oxygen has an atomic number of 8. (it has eight protons in its nucleus). At normal temperatures and pressures, oxygen transforms into the chemical compound (O2) of two atoms, which is a colourless gas.
To know more about the covalent bond, check out:
https://brainly.com/question/3447218
#SPJ1
A 0.5 g of naphthalene (C10H8) is burned in a bomb calorimeter containing 650g of water at an initial temperature of 20oC. After the reaction, the final temperature of the water is 26.4oC. The heat capacity of the calorimeter is 420 J/oC. Using these data, calculate the heat of combustion of naphthalene in kJ/mol.
Here, naphthalene is being burned in a water-filled bomb calorimeter.
What is Combustion?
Combustion is a chemical reaction between a fuel and an oxidizer in which heat, light, and other products of combustion are released. The most common type of combustion is the burning of hydrocarbon fuels, such as natural gas or gasoline, to produce carbon dioxide and water vapor as the main products.
Heat of combustion = [mass of water x specific heat capacity x (final temperature - initial temperature)] / (mass of naphthalene)
Heat of combustion = (650 g x 4.185 J/g∙°C x 6.4°C) / (0.5 g)
Heat of combustion = 16,914 J/g
Heat of combustion = 16,914 J/g x (1 mol/128 g)
Heat of combustion = 131.5 kJ/mol
Hence, the heat of combustion is 131.5 kJ/mol.
To know more about combustion,
https://brainly.com/question/10458605
#SPJ4
Why does the water creep up the paper? Explain this. Draw the molecular interactions associated with the macroscopic observation.
( I only need the drawing to be honest and I would really appreciate it if you could explain it)
Capillary action involves the hydrogen bonding in water.
What is capillary action?We have to note that when we are talking about capillary action, what we mean is the movement of water up the paper. We know that this movement of water would have a lot to do with the kind of intermolecular interaction that is going on.
Note that the water is composed of polar O-H bonds that can be able to interact with the -OH bonds that can be seen in the cellulose that is water and this accounts for the capillary action in water.
Learn more about capillary action:https://brainly.com/question/13228277
#SPJ1
Identify the Lewis acid in the following reaction: Pt2+(aq) + 4NH3 (aq) ? Pt(NH3)4,2+(aq)
a) Pt2+
b) NH3
c) Pt(NH3)4,2+
The Lewis acid in the following reaction: Pt2+(aq) + 4NH3 (aq) ?Pt(NH3)4,2+(aq) is : a) Pt2+.
What do you understand by a Lewis acid?Platinum ion (Pt2+) ( P t 2 + ) is a Lewis acid in the given reaction because it accepts pair of electron from ammonia.
A Lewis acid is any substance, such as H+ ion, that can accept a pair of nonbonding electrons. In other words, Lewis acid is an electron-pair acceptor. Lewis acid is chemical species that has an empty orbital which is capable of accepting electron pair from Lewis base to form a Lewis adduct.
To know more about Lewis acid, refer
https://brainly.com/question/12326649
#SPJ4
Thiamine hydrochloride (vitamin B1 hydrochloride, HC12- H17ON4SCl2) is a weak acid with Ka 5 3. 4 3 1027. Sup- pose 3. 0 3 1025 g of thiamine hydrochloride is dissolved in 1. 00 L of water. Calculate the pH of the resulting solution. (Hint: This is a sufficiently dilute solution that the autoion- ization of water cannot be neglected. )
According to the given statement The pH of the resulting solution is 13.03.
How to calculate pH?To calculate the pH of the resulting solution, we need to know the concentration of the thiamine hydrochloride ions in the solution.
The Ka value of thiamine hydrochloride is 5.3 x 10^-27. Since thiamine hydrochloride is a weak acid, it dissociates in water according to the following equation:
HC12-H17ON4SCl2 (s) <-> H+ (aq) + C12-H17ON4SCl2- (aq)
The product of the acid and the base concentrations is equal to the acid dissociation constant (Ka)
H+(aq) * C12-H17ON4SCl2- (aq) = Ka
Molarity (M) = moles of solute/liters of solution
3.0 x 10^-25 g of thiamine hydrochloride is dissolved in 1.00 L of water. The molar mass of thiamine hydrochloride is 337.29 g/mol. So we can calculate the number of moles of thiamine hydrochloride in the solution.
moles = mass / molar mass
moles = 3.0 x 10^-25 / 337.29 = 8.94 x 10^-28
Molarity = moles / liters = 8.94 x 10^-28 / 1 = 8.94 x 10^-28 M
Now we can substitute the concentration of thiamine hydrochloride into the equation for the acid dissociation constant.
Ka = [H+] * [C12-H17ON4SCl2-]
Ka = (x)(x) = 8.94 x 10^-28
We know the Ka value and we know the concentration of thiamine hydrochloride ions. So we can use the Ka value and the thiamine hydrochloride concentration to calculate the concentration of H+ ions in the solution.
x^2 = 8.94 x 10^-28
x = √(8.94 x 10^-28)
x = 9.4 x 10^-14
[H+] = x = 9.4 x 10^-14 M
The pH of the solution is calculated by taking the negative log of the H+ concentration:
pH = -log(9.4 x 10^-14)
pH = 13.03
To know more about Thiamine hydrochloride visit: brainly.com/question/8928076
#SPJ4
How do you calculate grams per mole?
Use the grams to moles formula to calculate the number of moles, n, of a substance with a given mass, m, (in grams) accurately, where M denotes the substance's molar mass. Typically, g/mol is used as the unit.
n = m / M
The mole is the SI unit used to measure a substance's quantity. There are precisely 6.02214085774× 10²³ atoms, molecules, or other particles in one mole of matter. The Avogadro number is this enormous magnitude. A mole of a substance is defined as a mass of material that contains exactly 12,000 g of 12C's exact number of atoms as fundamental units. The International System of Units uses the mole (symbol: mol) as the unit of material quantity (SI).
Learn more about moles here:
https://brainly.com/question/24748125
#SPJ4
The reaction 2NO(g) + O2(g) → 2NO2(g)
has the following rate law: Rate = k[O2][NO]2.
the order of [NO] is
The order of [NO] is 2.
The rate law for a chemical reaction is an equation that describes how the rate of the reaction changes with respect to the concentrations of the reactants. In this case, the rate law for the reaction 2NO(g) + O2(g) → 2NO2(g) is Rate = k[O2][NO]^2.
The order of a reactant in a rate law is determined by the exponent to which its concentration is raised. In this case, the concentration of NO is raised to the power of 2, so the order of [NO] is 2. This means that the rate of the reaction is directly proportional to the square of the concentration of NO. Therefore, as the concentration of NO increases, the rate of the reaction will increase at a faster rate.
Learn more about the chemical reaction here:
https://brainly.com/question/25769000
#SPJ4
Determine the number of atoms of each element in the following: 4Al(OH)3
symbol
aluminium - Al 4
oxygen- o 12
hydrogen- H 12
What is Gay- Lussacs law? State the definition of law in your own words.
A flask contains a mixture of N2 and O2 at STP. If the partial pressure of N2 is 40 kPa, what's the mole fraction o
A flask contains a mixture of N₂ and O₂ at STP. If the partial pressure of N₂ is 40 kPa, the partial pressure of O₂ is 61.325 kPa.
STP is the abbreviation which is used for a Standard Temperature and Pressure. The standard temperature is 273 K as well as the standard pressure is 1 atm pressure.
1 atm = 101.325 kPa
According to Dalton's law, state's that the sum of the individual pressures exerted by the gases in a mixture is the total pressure.
[tex]P_{total}[/tex]= [tex]P_{A}[/tex] + [tex]P_{B}[/tex]
Therefore, [tex]P_{total}[/tex]= [tex]p_{n2}[/tex] + [tex]P_{O2}[/tex]
[tex]P_{N2}[/tex] = 40kPa
[tex]P_{total}[/tex] = 101.325kPa
101.325kPa = 40kpa + [tex]P_{O2}[/tex]
[tex]P_{O2}[/tex] = 61.325kpa
--The given question is incorrect, the correct question is
--"A flask contains a mixture of N₂ and O₂ at STP. If the partial pressure exerted by the N₂ is 40.0 kPa, the partial pressure of O₂ is?"--
To know more about temperature here
https://brainly.com/question/11464844
#SPJ4
Who first identified the element radium? charles richard drew enrico fermi jonas salk marie curie
Marie Curie is credited with the discovery of radium. In 1898, she and her husband Pierre Curie discovered the element while experimenting with pitchblende, an ore containing uranium. They isolated a new substance, which they named radium, after the Latin word for ray.
What is uranium?Uranium is a naturally occurring element that is found in rocks and soil. It is a dense, silvery-white metal that has the highest atomic weight of all elements. Uranium is slightly radioactive and produces energy when it undergoes nuclear fission. It is an important source of energy generation and is used in nuclear reactors to produce electricity. Uranium also has a variety of other uses, such as in military applications, medical imaging, and industrial processes. It is a nonrenewable resource, and its supply is limited. Due to its radioactive nature, uranium must be handled with caution and special safety precautions must be taken to protect against the radiation it
To learn more about uranium
https://brainly.com/question/29234132
#SPJ4
Answer: its D- Marie Curie
Explanation: I got it right on the test! hope this helps :)
What happens to the molecules in the room as they change from a liquid to a gas?
When a liquid changes to a gas, the molecules in the room gain enough energy to break the bonds that hold them together in the liquid state.
What are Molecules?
Molecules are the smallest unit of matter that still has the properties of a particular substance. They are made up of two or more atoms that are bonded together. Molecules can be covalent, meaning the atoms in the molecule share electrons, or ionic, meaning one atom has donated electrons to the other.
This energy comes from an increase in temperature, which causes the molecules to move faster and farther apart. As the molecules move around and expand, they fill the room with a vapor or gas.
To know more about molecules,
https://brainly.com/question/26044300
#SPJ4
The density of ________ is 0.900 g/L at STP? a) CO
b)CH4
c) NO
d) Ne
e) N2
Answer:ne
Explanation:
What is molecular magnet? Draw 1 diagrams to show the arrangement of molecular magnets in magnet and magnetic substances.
Write the equilibrium expression, Kc, for Reaction 4: H2 + I2 ⇌ 2HI (Hint: Because of the coefficient “2” in front of HI, you will have to square the concentration of HI to find Kc.)
The formula for the equilibrium constant is; [tex][HI]^{2} /[H_{2} ] [I_{2} ][/tex]
What is the equilibrium constant?We know that when we talk about the equilibrium constant that we are looking at the kind of constant that shows the extent to which there has been the conversion of the reactants to the products.
We can be able to obtain the equilibrium constant of the system by the application of the law of mass action and this would give the correct6 form of the expression for the equilibrium constant. This is how we know which of the species would have the square.
Learn more about equilibrium constant:https://brainly.com/question/10038290
#SPJ1
In the following pair, which species would you expect to be the stronger Lewis acid?
a Cu+
b Cu2+
from the given pair, Cu 2+ is the specie that would you expect to be the stronger Lewis acid- Cu 2+
A Lewis acid is a chemical species that can accept a pair of electrons to form a covalent bond. It is named after Gilbert N. Lewis, who first proposed the concept in 1923. In general, a Lewis acid can be any atom, ion or molecule that has an empty orbital that can accept an electron pair from a Lewis base. The Lewis base is a species that can donate a pair of electrons to form a covalent bond.Examples of Lewis acids include metal cations, such as Al3+ and Fe3+, and neutral molecules that have a vacant orbital, such as BF3 and AlCl3. Inorganic compounds like H+ and boron trifluoride (BF3) are also examples of Lewis acids. It is important to note that the Lewis acid-base theory is an extension of the Bronsted-Lowry acid-base theory. This theory only considers the transfer of protons, but Lewis theory consider electron pair transfer.
To learn more about Lewis acid here:
https://brainly.com/question/15570523
#SPJ4
A vessel is filled with a gas at a temperature of 30 degree celsius and operator of 67cm mercury calculate the final pressure of the volume of the gas is doubled it is heated to 80degree celcious
The final pressure is 6312.935 Pa.
The final pressure of the gas can be calculated using the Ideal Gas Law, PV = nRT.
In this situation, the volume of the gas is doubled and the temperature is increased from 30 degrees Celsius to 80 degrees Celsius, while the number of moles of gas and the ideal gas constant remains constant.
Therefore, the pressure of the gas will decrease as the volume doubles and the temperature increases. The final pressure can be calculated by multiplying the initial pressure by the ratio of the initial volume to the final volume and the ratio of the final temperature to the initial temperature.
Final pressure = (Initial pressure) x (Initial volume / Final volume) x (Final temperature / Initial temperature)
The initial pressure is 67cm mercury. 1cm mercury = 133.322 Pa so 67cm mercury = 67*133.322 =8933.294 Pa.
The final temperature is 80-degree celsius = 80+273 = 353K
The final pressure =8933.294 x (1/2) x (353/303) = 6312.935 Pa
Learn more about Ideal Gas Law here:
https://brainly.com/question/27870704
#SPJ4
Provided below are pictures of three different scnearios in which two different chemicals are mixed together. for each scenario, make a claim about whether or not a chemical reaction is occuring. Provide evidence and reasoning to support your claim. If a reaction cannot be determined based on the provided picture, explain why not and how you could determine if a reaction has occured. Use specific examples in your explanation.
Looking at the images that we have, we can see that there is a reaction in the images A and C.
What is a reaction?We would need to settle in our minds what is implied when we talk about a chemical reaction. You have to know that if we are talking about a chemical reaction then we are talking about the kiondfs of reaction that would lead to the following observations;
1) There is a change in the temperature of the system
2) There is an effervescence of gas in the system
3) There is a change in color
4) There is the appearance of a solid in the system
We would now have to look at all the setups that we have here and we have to look at it in such a way that we could know if there is a reaction that is going on in any of them as shown.
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
A chemist determined by measurements that moles of silver participated in a chemical reaction. Calculate the mass of silver that participated in the chemical reaction.
A chemist determined that moles of silver participated in a chemical reaction using measurements. The mass of silver involved in the chemical reaction is 1.08 grams.
Moles of silver participated = 0.01
Molar mass of silver = 108 gram/mole
Weight of silver participated= mole* molar mass
= 0.01*108 gram
= 1.08 gram
A chemist (from the Greek chm(a) alchemy; replacing chymist from Medieval Latin alchemist) is a scientist who studies chemistry. Chemists investigate the structure and properties of matter. Chemists meticulously describe the properties of molecules and their constituent atoms in terms of quantities. Chemists carefully measure the proportions of substances, the rates of chemical reactions, and other chemical properties. Pharmacists are commonly referred to as chemists in Commonwealth English.
Chemists apply their knowledge to learn the composition and properties of new substances, as well as to reproduce and synthesize large quantities of useful naturally occurring substances and to create new artificial substances and processes.
Learn more about chemist here:
https://brainly.com/question/30007736
#SPJ4
The solid has a mass of 180 g. What is the density of the solid? Show your work. Be sure to use correct units of measurement. HELP NEEDED ASAP!!!!
Answer:
I'm telling the teacher on u man stop cheatingWhich is true of an atom? A. The valence electrons make up the majority of the mass and volume of an atom. B. The electron cloud makes up the majority of the mass and volume of an atom. C. The valence electrons make up the majority of the mass of an atom but do not take up much volume. D. The electron cloud makes up the majority of the volume of an atom but does not have much mass
The statement that is true about an atom is D. The majority of volume of an atom is make up by the electron cloud which has no mass.
In an atom, there are three sub-atomic particles that are protons, electrons and neutrons. The protons and neutrons are present inside the nucleus while the electrons revolve around the orbits i.e., circular orbits. The majority of volume of an atom is make up by the electron cloud which has no mass. Electrons are negatively charged in nature while the positive species are protons and neutrons carry no charge in them. The circular path is termed as orbits in which electrons revolve.
Thus, option D is the correct choice.
To learn more about atom check the link below:
https://brainly.com/question/6258301
#SPJ4