Answers
Answer:
I assume that you mix the 25 mL alcohol with 45 mL water.
The answer depends on a big IF : IF the volumes are additive. Very often volumes of liquids are not additive
Total volume = 70 mL
isopropyl alcohol %(v/v) = 25mL/ 70 mL * 100 % = 35.7% v/v
The answer should have only 2 significant digits: 36%v/v
Explanation:
Hope it helps
The percent by volume of a solution formed by mixing 25 ml of isopropanol with 45 ml of water is 35.71% which is rounded off to 36%.
What is meant by percent by volume of a solution?Percent volume is defined as the concentration of a particular solute which is measured in terms of volume present in a solution. The volume of the solution is present in the denominator which indicates the total volume of all components .
It is expressed as,
percent volume= volume of solute/volume of solution×100
It is used for solutions which are made by mixing two components . It is one of the ways of expressing concentrations of mixture with a dimensionless quantity.
Percent volume of the given solution is calculated by substituting the given values in the formula like, 25/70×100=35.71%
Thus, the percent by volume concentration of the solution is 35.71%≈36%.
Learn more about percent by volume ,here:
https://brainly.com/question/14710169
#SPJ2
Related Questions
What is potential energy
Answers
s
Part B
Refer to the observations of the test tubes from part A. Determine which metal (or hydrogen) in each test tube is
more reactive. Remember that the less reactive metal (or hydrogen) will typically end up in pure form as an
element, so no reaction will occur if the less reactive metal (or hydrogen) is the one that begins in pure form
Answers
Answer:
More Reactive:
iron
hydrogen
zinc
magnesium
zinc
iron
Explanation:
The reactivity of metals can be determined based on their ability to displace other metals from their compounds or to displace hydrogen from acids. Generally, metals that are higher in the reactivity series can displace metals lower in the series.
1. **Iron & Copper:** Iron is more reactive than copper. If iron is present in its pure form, it would displace copper from its compound.
2. **Copper & Hydrogen:** Hydrogen is less reactive than copper. No reaction will occur if hydrogen is the element in pure form.
3. **Zinc & Iron:** Zinc is more reactive than iron. If zinc is present in its pure form, it would displace iron from its compound.
4. **Iron & Magnesium:** Magnesium is more reactive than iron. If magnesium is present in its pure form, it would displace iron from its compound.
5. **Zinc & Hydrogen:** Hydrogen is less reactive than zinc. No reaction will occur if hydrogen is the element in pure form.
6. **Iron & Hydrogen:** Hydrogen is less reactive than iron. No reaction will occur if hydrogen is the element in pure form.
Remember, the reactivity series is a ranking of metals based on their tendency to lose electrons and form positive ions. Elements higher in the series can displace elements lower in the series from their compounds in certain reactions.
To know more about reactivity of metal:
https://brainly.com/question/20570629
#SPJ3
What caused the channel on Mars? water or lava? give reasoning and evidence
Answers
Answer:
A channel in an ancient Martian "riverbed" wasn't carved by liquid water but was built by molten lava, according to a new study of surface features on Mars. ... On Earth, lava tubes form during sustained volcanic eruptions, when lava flowing through previously solidified masses leaves behind empty channels in the rock
Explanation:
The lava, itself (when liquid) is very much above the boiling point of water, so it is not wet with liquid water, so it's a no in that sense,' he writes. ... Lava does contain a lot of water, especially prior to eruption (when it's called magma), but also as it flows across the ground,' he explained.
Answer:
it was both both if you ask me it's water
Explanation:
il explain answer if you brainly me
0
10
o
20
30
40
90
60
80
50
g
70
0
1
2
3
4
6
9
7
8
5
g
.1
.2
.3
.4
.6
.7
.8
.9
.5
9
Can this balance be read to the nearest milligram?
O no
O yes
Answers
Answer:
30
Explanation:
yes of courseeee i cant balance with the nearest milligram
Please help me with all ASAP I’ll mark brainly
Answers
Answer:
Explanation:
1.c
2.j
3.h
4.b
5.f
6.d
7.a
8.i
9.e
10.g
detailed description of how group 1 atoms bond with group 7 atoms
Answers
Answer:
group 7 atoms react
Explanation:
When a group 7 element takes part in a reaction, its atoms each gain one electron. These atoms form negatively charged ions . The ions have a stable arrangement of electrons, with a complete outer shell.
what city building could represent the cytoplasm
Answers
Answer:
the ground of the building or supports
Explanation:
because that's what holds the building in place
Write a balanced chemical equation based on the following description:
the reaction of gaseous tricarbon octahydride with oxygen gas produces gaseous carbon dioxide and water vapor
Answers
Answer:
C3H8(g) + 5O2(g) = 3CO2(g) + 4H2O(g)
Explanation:
The two boron atoms listed in the table are isotopes of the boron. The two carbon atoms and the two oxygen atoms are also called isotopes. Based on the patterns in the particle compositions of these atoms, write a definition for “isotopes”
Answers
Answer:
A type of an atom which has a different number of neutrons but the same atomic number, therefore making it the same element. This atom would still have the same properties as well. (Ex: Vanadium-51 is an isotope of Vanadium that has 51 neutrons but still has 23 protons, as its atomic number is 23.)
Isotopes are variants of an element that have the same number of protons in their atomic nucleus, identifying them as the same chemical element, but differ in the number of neutrons.
The variations in neutron numbers among isotopes lead to differences in their atomic masses, resulting in isotopes having slightly different physical properties while retaining similar chemical behavior.
For example, in the case of boron, the two isotopes listed may have the same number of protons (5), but one has 6 neutrons, and the other has 7 neutrons, leading to slightly different atomic masses.
Similarly, for carbon and oxygen, the isotopes exhibit variations in neutron numbers while maintaining the same number of protons, defining them as isotopes of the respective elements. Isotopes play a crucial role in various scientific fields, including radiometric dating, nuclear energy, and medical imaging.
To know more about Isotopes here
https://brainly.com/question/27475737
#SPJ3
What is the CATHODE half-reaction for the cell
Cu(s)—> Cu2+ (aq)||Ag+ (aq)|Ag(s)?
Answers
Answer:
Ag/Ag+ electrode is cathode and Cu/Cu+ electrode is anode.
~im not sure it its correct i found it~
Explanation:
What are the products of the chemical reaction shown?
CH4+2O2 --> CO2 + 2H2O
Question 10 options:
CH4 and O2
O2 and H2O
CO2 and H2O
CH4 and CO2
Answers
Answer:
CO2 AND H20 I THINK IM 99 PERCENT SURE
Calculate the average kinetic energies of CH4g and N2 g molecules at 273 K and 546K
Answers
Answer:
Average kinetic energy of gases, which is derived from the RMS (root mean square speed) and KE equation, can be solved as:
It appears that the average KE of gases is dependent on the temperature which means that all gases will have the same KE as long the temperature is the same
The Russian Mir space station used a chemical oxygen generator system to make oxygen for the crew. The system ignited a tube of solid lithium perchlorate (LiClO4) to make oxygen and lithium chloride (LiCl): LiClO4 (s) 2O2 (g) + LiCl (s) If you have 300 g of LiClO4, then… (a) How many moles of oxygen gas will be generated?
(b) The station’s standard operating conditions are a pressure of 101.5 kPa and a temperature of 21°C. Based on this information and your answer to part (a), how many liters of oxygen gas will be generated? (Show your work.)
Answers
300 g of LiClO₄ produce 5.64 moles of O₂, which is equivalent to 136 L of O₂ at 101.5 kPa and 21 °C.
Let's consider the following balanced equation.
LiClO₄(s) ⇒ 2 O₂(g) + LiCl(s)
We can calculate the moles of O₂ produced from 300 g of LiClO₄ using the following relationships.
The molar mass of LiClO₄ is 106.39 g/mol.The molar ratio of LiClO₄ to O₂ is 1:2.[tex]300 g LiClO_4 \times \frac{1molLiClO_4}{106.39gLiClO_4} \times \frac{2molO_2}{1molLiClO_4} = 5.64molO_2[/tex]
Then, we will convert 101.5 kPa to atm using the conversion factor 1 atm = 101.325 kPa.
[tex]101.5 kPa \times \frac{1 atm}{101.325kPa} = 1.002atm[/tex]
Next, we will convert 21 °C to Kelvin using the following expression.
[tex]K = \° C + 273.15 = 21\° C + 273.15 = 294 K[/tex]
Finally, we will calculate the volume occupied by 5.64 moles of oxygen using the ideal gas equation.
[tex]P \times V = n \times R \times T\\\\V = \frac{n \times R \times T}{P} = \frac{5.64 mol \times (\frac{0.082atm.L}{mol.K} ) \times 294K}{1.002atm} = 136 L[/tex]
300 g of LiClO₄ produce 5.64 moles of O₂, which is equivalent to 136 L of O₂ at 101.5 kPa and 21 °C.
Learn more: https://brainly.com/question/18518493
What is the mass % of acetone in a 1.85 M solution of acetone (MM = 58.08 g/mol) in water? The density of the solution is 0.971 g/mL.
Answers
A 1.85 M acetone solution (MM = 58.08 g/mol) with a density of 0.971 g/mL has a mass percent of acetone of 11.0%.
What is the mass percent?It refers to the mass of solute in 100 grams of solution.
Let's suppose we have 1 L of the solution.
Step 1: Calculate the mass of solute (acetone).We have a 1.85 M solution of acetone (MM = 58.08 g/mol). We will calculate the mass of acetone using the following expression for molarity.
M = mass acetone / MM acetone × liters solution
mass acetone = M × MM acetone × liters solution
mass acetone = 1.85 mol/L × 58.08 g/mol × 1 L = 107 g
Step 2: Calculate the mass of the solution.We have 1 L (1000 mL) of the solution with a density of 0.971 g/mL.
1000 mL × 0.971 g/mL = 971 g
Step 3: Calculate the mass percent of acetone.%acetone = (107 g/971 g) × 100% = 11.0 %
A 1.85 M acetone solution (MM = 58.08 g/mol) with a density of 0.971 g/mL has a mass percent of acetone of 11.0%.
Learn more about mass percent here: https://brainly.com/question/4336659
#SPJ1
Is oxygen a necessary reactant for an oxidation reaction? Explain
Answers
Answer:
So oxidation reactions need not involve oxygen. This redox reaction is actually the sum of two separate half-reactions (a reduction half-reaction and an oxidation half-reaction).
The oxidation reaction does not require oxygen as a reactant. An atom, molecule, or ion loses one or more electrons during the chemical process of oxidation, increasing its positive charge.
What is oxidation ?When electrons are lost or the oxidation state increases, it is called oxidation; when they are gained or the oxidation state decreases, it is called reduction.
A molecule is said to be oxidized when oxygen is added to it or when hydrogen is taken out of it. Reduction is the process of introducing hydrogen or removing oxygen from a molecule.
An element is oxidized if it loses electrons, which is another definition of oxidation. Any electron acceptor can oxidize an element by taking in the lost electrons, hence oxygen is not a necessary component in oxidation.
The process of converting glucose into ATP requires oxygen. For each glucose, the first step only releases two molecules of ATP.
Thus, The oxidation reaction does not require oxygen as a reactant.
To learn more about an oxidation, follow the link;
https://brainly.com/question/13182308
#SPJ6
Magnesium reacts with a certain element to form a compound with the general formula MgX. What would the most likely formula be for the compound formed between Lithium and element X?
Answers
Answer:K2X
Explanation: Valency can be defined as the combining power of an element. It is the valency that dictates the value an element will have when writing a chemical formula for its compound.
MgX is a compound of magnesium and an element X. The valency of magnesium in most of its compound is +2. Now for the 2 to have been absent in the chemical formula, this shows that the element X itself have a valency if -2 for the valencies of both to have canceled out.
Now considering the element potassium, it is an alkaline metal belonging to group 1 of the periodic table. Hence, it is expected that it has a valency of +1
Forming a compound with element X means there would be an exchange of valencies between the two. We have established that x has a valency of -2. The formula of the compound thus formed by exchanging the valencies of both element would be K2X
The chemical formula for the compound formed between Lithium and element X is Li₂X.
What is valency?Valency can be described as the combining power of a chemical element. It is the valency that describes the value an element will have in the chemical formula for that compound.
MgX compound is a compound of magnesium and an element X. The valency of magnesium is +2. The chemical formula shows that the element X itself has a valency of -2 which gave a neutral compound.
Now given element is Lithium, it is an alkali metal of group 1 of the periodic table. It has a valency of +1 as it has one electron in its valence shell.
Forming a compound with element X, there will be an exchange of valencies between the two. As element X has a valency of -2. The formula of the formed compound by exchanging the valencies of Lithium and element X would be Li₂X
Learn more about Valency, here:
https://brainly.com/question/12744547
#SPJ6
need help :( number 5 and 6
Answers
The genesis of a poem for me is usually a cluster of words. The only good metaphor I can think of is a scientific one: dipping a thread into a supersaturated solution to induce crystal formation. I don't think I solve problems in my poetry; I think I uncover the problems.
Number 6.
Unsaturated solutions: found in the vast majority of solutions. eg. blood, soda, alcoholic drinks, cell sap, battery acid.
Supersaturated solutions: invert sugar (a mixture of glucose and fructose), gasses dissolved in crude oil when it is still untapped, some clouds (those that cause cloudbursts).
saturated solution: the carbon dioxide dissolved in sodas (unopened), nitrogen in the air in the earth.
how many atoms of vanadium are in 1.28 grams of vanadium
Answers
The number of atoms in 1.28 grams of vanadium is 1.51×10²² atoms
Avogadro's hypothesisFrom Avogadro's hypothesis,
1 mole of Vanadium = 6.02×10²³ atoms
But
1 mole of Vanadium = 51 g
Thus,
51 g of Vanadium = 6.02×10²³ atoms
How to determine the atoms in 1.28 g of Vanadium51 g of Vanadium = 6.02×10²³ atoms
Therefore,
1.28 g of Vanadium = (1.28 × 6.02×10²³) / 51
1.28 g of Vanadium = 1.51×10²² atoms
Thus, 1.51×10²² atoms is present in 1.28 g of Vanadium
Learn more about Avogadro's number:
https://brainly.com/question/26141731
What is the source of the magma that erupts from a volcano?
outer core
inner core
mantle
Earth's oceans
Answers
Answer:
the magma comes from the mantle
State TRUE or FALSE : Nutrients are not necessary for the functioning of our body
Answers
Answer:
False
Explanation:
Nutrients are so important to our health.Nutrients are compounds in foods essential to life and health, providing us with energy, the building blocks for repair and growth and substances necessary to regulate chemical processes.
Is this equation balanced and in the lowest form?
4NH3 → 2N2 + 6H2
Answers
Answer:
It's balanced but not in the lowest form
Explanation:
The actual equation is given by
[tex]\\ \sf\longmapsto 2NH_3\longrightarrow N_2+3H_2[/tex]
Can someone please help me answer this
Answers
Answer:
yiur mom
Explanation:
d
what happens to a circuits resistance (R), voltage (V), and current (I) when you increase the diameter of the wire in the circuit?
a. R increases, V is constant, I increases
b. R decreases, V is constant, I increases
c. R decreases, V increases, I increases
d. R increases, V decreases, I decreases
Answers
Answer:
b. R decreases, V is constant, I increases
Explanation:
when we increase the diameter of wire increases ,resistance decreases and current increases.Therefore, the option is b.
Resistance is an electrical quantity which opposes the electric current in the circuit. Resistance is directly proportional to the length of the wire and inversely proportional to the diameter of the wire. If length of wire increases resistance will increases and if the diameter of the wire increase resistance will decreases.
R = ρ L/A
Here ρ is the resistivity
L is the length of the wire
A is the cross-sectional area of wire/diameter of the wire
Voltage is the potential difference between two terminals of voltage source. Current is the flow of electrons in the circuit. Voltage is the product of current and resistance.
V=IR
Rewrite the above equation interms of current
I=V/R
From the above equation we can say that current is inversly proportional to the resistance.Therefore,the correct option is b.
Learn more about,resistance
https://brainly.com/question/4289257
Explain why the nucleus of an atom is positively charged but the overall charge of an atom is neutral
Answers
Answer:
The nucleus is positively charged because it contains all of the protons however the charge of an atom is neutral because there is an equal amount of protons (positive) and electrons (negative) meaning the opposite charges cancel each other out therefore making the atoms overall charge neutral.
Explanation:
what is the formula for tetraaquaoxalatoiron(III)sulphate
Answers
Answer:
Fe2(SO4)3(H2O)n
Explanation:
Answer:
sorry I couldn't understand the question
What is the angle between adjacent sp hybrid orbitals?
Answers
Answer:
180 degrees
Explanation:
sp hybridization generates orbitals that overlap linearly, generating a straight line. This leads to an angle measurement of 180 degrees.
What is the Ideal level for chlorine in a spa?
Answers
Answer:
at least 3 ppm in hot tubs/spas
Explanation:
Please help me with this I’ll give you extra credit it’s due in 10 minutes thank youuu!!! :))
Answers
Answer:
Okay ask away. . . You haven't asked anything that we would be able to answer
Nguyên tử khối của đồng
Answers
Answer:
huwattt
Explanation:
i can't understand
How many molecules are present in 40g of c02
Answers
Answer:
2.258x 10 above 24 molecules
Explanation:
We use Avogadro's number of 6.022×1023 molecules per mole to calculate the number of molecules from the number of moles represented by 165 g of carbon dioxide.
The gram-molecular weight of carbon dioxide can be calculated from the atomic weights for carbon and oxygen (two of them in CO2) given in a Periodic Table of the Elements.
165 g CO244.01 g/mol×6.022×1023moleculesmol
=2.258×1024molecules