What kind of software is available for assessing the carbon footprint?

Answers

Answer 1

There are several types of software available for assessing the carbon footprint of a company, organization, or individual. These tools can help users track their GHG emissions and set reduction targets.

Carbon footprint calculators: These tools allow users to estimate their GHG emissions by entering information about their energy use, transportation, waste, and other relevant factors. Some calculators are specific to a particular sector or industry, while others are more general.

Carbon accounting software: This type of software helps users track their GHG emissions over time and set reduction targets. It may include features such as data management, reporting, and verification.

Life cycle assessment (LCA) software: LCA software is used to assess the environmental impacts of a product or service from raw material extraction to disposal. It can be used to quantify GHG emissions at different stages of a product's life cycle.

Supply chain software: This type of software is used to track the environmental impacts of a company's supply chain, including GHG emissions. It may include features such as data management, reporting, and supplier assessment.

Learn more about carbon footprint here:

https://brainly.com/question/282900

#SPJ4


Related Questions

If you observe a Full Moon on January 12th, on what date would you observe the next New Moon?

Answers

January 19

Explanation:

every first 7 days of a month the moon roughly starts its full moon phase

What is the mass of 5.6 moles of Iron (III) Oxide?

Answers

Answer:

312.731

Explanation:

it had a long answer but im sure ur teacher wanted u to round it

hope this helps!

~goldfishareswag/brianna

:)

Iron (III) oxide= Fe2O3
1) Find the gfm (gram formula mass, the gfm is the grams per mole. So, you’re pretty much finding one mole of Fe2O3) of Fe2O3
2 Fe: 2(55.845)
3 O: 3(15.9994)
=160 gfm
2) multiply gfm by mole number
160(1 mole of Fe2O3 is 160. What are 5.6 moles?)
160 x 5.6
= 896g

how do particles differ after a physical change?

Answers

Answer:

They are still the same particals just. packed together diffrently depending on what stae of matter it's in.

Explanation:

An organ system is formed by..

A) two or more cells working together.

B) two or more tissues working together.

C) two or more organs working together.

D) two or more organisms working together

Answers

I think it is b because it's made up out of two or more tissues

Please help with these two (last question is nwse)

Answers

Answer:

your answer gonna be 20 miles

Those microscopic organisms perform what 2 processes that help pave the way for lichen by creating organic material.

Answers

Answer:

Decomposition pf residues and weathering of rock.

Explanation:

Microorganisms performs two processes such as decomposition and weathering of rock materials. These two processes make the medium suitable for the growth and development of the lichens because these processes increases nutrient and organic matter on the rock surface that is used by the lichens for its growth. In decomposition process, larger compounds are broken down into simpler substances while on the other hand, the weather of rocks causes breakdown of rock material into simpler minerals that also used by the lichens.

How many grams of glycerine, C3H8O3, are needed to make 100. mL of 2.60 M solution?

Answers

Answer:

the mass of the glycerine needed in the given solution is  23.92 g

Explanation:

Given;

molarity of the solution (C₃H₈O₃), C = 2.60 M

Volume of the solution, V = 100 mL = 100 x 10⁻³ L = 0.1 M

The molarity of a solution is given as follows;

[tex]Molarity = \frac{amount \ of \ solute \ (moles)}{volume \ of \ solution \ (L)} \\\\amount \ of \ solute \ (moles) = Molarity \ \times volume \ of \ solution \ (L)\\\\amount \ of \ solute \ (moles) = 2.6 \times 0.1 \\\\amount \ of \ solute \ (moles) = 0.26 \ mole[/tex]

The molecular mass of the given solution;

molecular mass = (12 x 3) + (8 x 1) + (16 x 3)

molecular mass = 92 g/mol

The mass of the glycerine needed in the given solution is calculated as follows;

reacting mass = amount of solute (moles)   x   molecular mass (g/mol)

reacting mass = 0.26 x 92

reacting mass = 23.92 g

Therefore, the mass of the glycerine needed in the given solution is  23.92 g

How many grams of KCl are made when 5.02 moles of
ZnCl2 react in the reaction below?
2KMnO4 + ZnCl2 → 2KCl + Zn(MnO4)2
lol pls help me

Answers

Answer: 747.98 grams of KCl are made when 5.02 moles of  [tex]ZnCl_2[/tex] react in the reaction.

Explanation:

The balanced chemical equation is:

[tex]2KMnO_4+ZnCl_2\rightarrow 2KCl+Zn(MnO_4)_2[/tex]

According to stoichiometry:

1 mole of [tex]ZnCl_2[/tex] produce = 2 moles of [tex]KCl[/tex]

Thus 5.02 moles [tex]ZnCl_2[/tex] will produce =[tex]\frac{2}{1}\times 5.02=10.04[/tex] moles of [tex]KCl[/tex]

Mass of [tex]KCl=moles\times {\text {molar mass}}=10.04mol\times 74.5g/mol=747.98g[/tex]

Thus 747.98 grams of KCl are made when 5.02 moles of  [tex]ZnCl_2[/tex] react in the reaction.

How many grams are in 4.5 x 10^22 molecules of water? please show dimensional analysis

Answers

Answer:

1.1grams

Explanation:

Find moles of water:

4.5x10^22/(6.02x10^23)=0.07mol

Find molar mass of the water

O=16.00g/mol

0.07x 16.00=1.1 grams

A study was conducted to see if increasing the substrate concentration has an appreciable effect on the velocity of a chemical reaction. With a substrate concentration of 1.5 moles per liter, the reaction was run 15 times, with an average velocity of 7.5 micromoles per 30 minutes and a standard deviation of 1.5. With a substrate concentration of 2.0 moles per liter, 12 runs were made, yielding an average velocity of 8.8 micromoles per 30 minutes and a sample standard deviation of 1.2. Is there any reason to believe that this increase in substrate concentration causes an increase in the mean velocity of the reaction of more than 0.5 micromole per 30 minutes

Answers

Answer:

There is not enough evidence

Explanation:

For  1.5 moles substrate concentration per liter

Reaction ( n2 ) = 15 runs

average velocity ( x2 ) = 7.5 micromoles per 30 minutes

standard deviation ( s2 ) = 1.5

For 2.0 moles substrate concentration per liter

Reaction( n1 ) = 12 runs

average velocity ( x1 ) = 8.8 micromoles per 30 minutes

standard deviation ( s1 )  = 1.2

Show Reason to believe that this increase in substrate conc causes an increase in mean velocity

Hypothesis test

H0 : μ1 - μ2 = 0.5

H1 : μ1 - μ2  > 0.5

level of significance ( ∝ ) = 0.01

attached below is a detailed solution to the problem

P-value ( 0.073 ) > level of significance ( 0.01 ) hence we fail to reject the null hypothesis

hence there in not enough evidence to believe that this increase causes an increase in the mean velocity of the reaction of more than 0.5 micromole per 30 minutes


Light is a type of energy produced by the vibration of electrically charged particles.
True or false?

Answers

Answer:

big brain

Explanation:

A book is pushed and released and it slides across a table for a short distance. The book quickly comes to a stop. The book originally
has kinetic energy. To what form of energy is the kinetic energy transformed?
A)
The kinetic energy is transformed into heat.
B)
The kinetic energy is transformed into chemical energy.
C)
The kinetic energy is not transformed into any other type of energy.
Eliminate
D)
The kinetic energy is transformed into electrical energy.
Law of Conservation of Energy
(58P2.c) Energy Transformation
D 149628
Regular Cals
Scientific Cals
My

Answers

Answer:

A

Explanation:

The book encountered friction which turned some of the energy into heat.

which shows how much electron is in the outer layer

Answers

Answer:

is there a picture or is it multiple choice?

What is the new pressure if the temperature outside is 296k and his weight causes the tire's volume to drop to 2.0 liters

Answers

Question:

At standard temperature and pressure, the volume of a tire is 3.5L. What is the new pressure if the temperature outside is 296k and its weight causes the volume of the gas is 2.0 L?

Answer:

The new pressure is: 1.896 atm

Explanation:

At standard temperature and pressure, we have:

[tex]P_1 = 1atm[/tex]

[tex]T_1 = 273.15k[/tex]

[tex]V_1 = 3.5L[/tex]

Outside, we have:

[tex]T_2 = 296k[/tex]

[tex]V_2 = 2.0L[/tex]

Required

Determine the new pressure

Using combined gas law, we have:

[tex]\frac{P_1V_1}{T_1} =\frac{P_2V_2}{T_2}[/tex]

This gives:

[tex]\frac{1 * 3.5}{273.15} =\frac{P_2*2.0}{296}[/tex]

Solve for [tex]P_2[/tex]

[tex]P_2 = \frac{296 * 1 * 3.5}{273.15*2.0}[/tex]

[tex]P_2 = \frac{1036}{546.30}[/tex]

[tex]P_2 \approx 1.896 atm[/tex]

Convert 18.6 L of neon gas at STP to atoms.

1.What is the coefficient of the scientific notation answer? 2.What is the exponent of the scientific notation answer? 3.How many significant figures are there in the answer?
4.What is the right most significant figure in the answer ?

Answers

Answer:

See explanation

Explanation:

1 mole of Ne occupies 22.4 L

x moles of Ne occupies 18.6 L

x = 1 mole *  18.6 L/22.4 L

x = 0.83 moles

1 mole contains 6.02 * 10^23 atoms

0.83 moles occupies  0.83 moles *  6.02 * 10^23 atoms/1 mole

= 4.9966 * 10^23 atoms = 5.0  * 10^23 atoms

the coefficient of the scientific notation answer =5.0

the exponent of the scientific notation answer = 23

significant figures are there in the answer = 5

the right most significant figure in the answer = 1

Acid HX has a very large Ka. How will the relative amounts of H+ and HX
compare at equilibrium?
A)The concentration of H+ will be larger than HX
B)The concentration of HX will be larger than H+
C)The concentration of HX will be equal to H+

Answers

The right answer is A

I am doing a break-out room and it won't let me pass I think I have all the other questions correct so this is the only one I'm not sure about.

Answers

1. figure one

2. figure two

3. figure three

4. figure two

5. figure one

Answer:

it goes A,C,B,C,A

Explanation:

Why the colloid can't be filitred?Write it's 4 examples.​

Answers

Answer:

Constituent substances of a colloid cannot be separated by ordinary filtration because the size of the particles in a colloid (or colloidal solution) is bigger than those in a true solution but smaller than those in suspension. It is between 1 nm to 100 nm in diameter.

ex- cheese, milk, aerosol spray, mayonnaise

Why must the mass of reactants in a chemical reaction
always equal the mass of products?

Answers

Answer:

law of conservation

Explanation:

matter cannot be destroyed nor made

An ball with a weight of 0.5 kg is sitting on a shelf that is 3 meters high. Help me! This is 8th grade sci btw.

Answers

Complete question:

A ball with a weight of 0.5 kg is sitting on a shelf that is 3 meters high. What is the gravitational potential energy of the ball ?

Help me! This is 8th grade sci btw

Answer:

the gravitational potential energy of the ball is is 14.7 J.

Explanation:

mass of the ball, m = 0.5 kg

height above the ground on which the ball is sitting, h = 3 m

The gravitational potential energy of the ball is calculated as follows;

P.E = mgh

P.E = 0.5 x 9.8 x 3

P.E = 14.7 J

Therefore, the gravitational potential energy of the ball is is 14.7 J.

There are moles of carbon present in 100 g of a
compound with the following percentage composition:
C= 40.0%, H = 6.72%, O = 53.29%.

Answers

Answer: 3.33

Explanation:

The molecular formula of the given composition is C₃H₆O₃.

What is molecular formula?

Molecular formula is defined as a compound's chemical formula, which counts the total number of each element present in a molecule of the compound as discrete molecules. The arrangement of atoms in a molecule in three dimensions is known as molecular geometry, commonly referred to as the molecular structure.

The percentage composition is

C = 40.00 %

H = 6.72 %

O = 53.29 %

Mole = 100 g

Mass of C = 40 / 100 x 100 = 40 g

mass of H = 6.72 / 100 x 100 = 6.72 g

Mass of O = 53.29 / 100 x 100 = 53.29 g

Dividing the mass with moles

C = 40 / 12 = 3.3

H = 6.72 / 1 = 6.72

O = 53.29 / 16 = 3.3

Formula = C₃H₆O₃

Thus, the molecular formula of the given composition is C₃H₆O₃.  

To learn more about molecular formula, refer to the link below:

https://brainly.com/question/28647690

#SPJ2

neeeeeeeed help with science

Answers

Answer: should be 28 degrees

Explanation:

NO FILES OR LINKS PLEASE HELPPPP IVE ASKED THIS 3 TIMES AND ALL I GET IS SCAM FILES ILL GIVE YOU BRAINLIEST PLEASE



What is the skeleton equation for
CuSO4 + 2NaOH → Cu(OH)2 + Na2SO Copper sulfate + Sodium hydroxide --> copper hydroxide + sodium sulfate ​

Answers

Answer:

*Inserting real answer*

Explanation:

I think CuSO4 + 2NaOH → Cu(OH)2 + Na2SO4 is the skeleton equation.

If I am wrong I am so sorry!!!

Have a nice day! :)

Also sorry for all the fake answers you have been getting that happened to me too TnT

1. what is an ethical concern about biotechnology

2. list 2 examples of transgenic organism

3. write a 3-sentences summary on how biotechnology affects individual, society, and environment

Answers

Answer:

1. There are so many ethical concerns about biotechnology, some Ethical issues that arise from the application of modern biotechnologies include:

Discrimination of individuals because of their health or health history as a result of knowing their genetic information,  minimizing harms while maximizing benefits, Interference with nature, privacy.

2. a. Plants (maize, rice)

   b. Fish (GloFish)

3. For individuals, biotechnology has helped in the prevention and treatment of a wide range of diseases. For society, biotechnology saves time, improves the health and quality of food through a reduction in the use of pesticides and it can create new viruses and bacteria that cause diseases. Biotechnology could address global change since more genetically modified plants are grown.

Phenolphthalein indicator is??

Answers

Answer:

Hey mate.....

Explanation:

This is ur answer.....

Phenolphthalein is often used as an indicator in acid–base titrations. For this application, it turns colorless in acidic solutions and pink in basic solutions. It belongs to the class of dyes known as phthalein dyes.

Hope it helps!

mark me brainliest pls....

Follow me! :)

An atom of a certain element has 19 protons, 19 electrons, and a mass number of 39. This element is very reactive. How many neutrons are in this atom?



Record your answer and fill in the bubbles on your answer document. Be sure to use the correct place value.

Answers

Answer:

There are 20 neutrons in this atom.  

Explanation:

If 335 g water at 35.5C loses 5750 J of heat, what is the final temperature of the water?

Answers

Answer:

The final temperature is  39.58 degree Celsius

Explanation:

As we know

Q = m * c * change in temperature

Specific heat of water (c) = 4.2 joules per gram per Celsius degree

Substituting the given values we get  -

5750 = 335 * 4.2 * (X - 35.5)

X = 39.58 degree Celsius

I NEED THIS LESS THAN 7 MINUTES IYS 15 POINTS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! What is the difference between a balanced equation and an unbalanced equation?
All of the answers are correct.
A balanced equation obeys the law of conservation of mass, an unbalanced equation does not. An unbalanced equation shows the conservation of mass.
Balanced equations do not show equal numbers of atoms on each side of the equation.

Answers

Answer:

Balanced equation have equal number of atoms of different elements in the side of reactants and products.

Answer:

- A balanced chemical equation has an equal numbers of atoms of different elements in the side of reactants and products.

- An unbalanced chemical equation has an unequal number of atoms of one or more elements in the reaction.

Explanation:

Can you help me please..

Answers

Answer:

Using Charles law of Gas

Explanation:

Can someone please help

Answers

Answer:

5.

A. Period

B. Group

6. C

Explanation:

Other Questions
Cual es el verbo regular de tener en ingls True or False The Athenian navy defeated the weak Spartan navy. Water vapor is produced by the process of:evaporationcondensationcloud formationrain if 5 miles= 8 km, convert 40 mules to kilometers A consultant wants to ask workers at a factory about the workers' job satisfaction. Which of the following best describes a stratified sample of workers?a. The consultant forms groups of workers based on the workers' shifts. Then, he selects workers at random from each group.b. All of the workers on the second floor of the factory building are easily accessible. So, the consultant selects the first workers from the second floor to arrive at work on a particular day.c. The consultant forms groups of workers based on the lengths of time the workers have worked at the factory. Then, he randomly chooses groups and selects all of the workers in these groups. If an object is projected upward into the air from ground level, then the height h(t) of the objectin feet at time t in seconds is given by:h(t) = -16t^2+ 344tHow long does it take for the object to hit the ground? SHOW ALL WORK clearly and neatly - do not skipsteps. The show all work part cannot be stressed enough. i dont understand any of this please help :( Event A: Rolling a number less than 4 on a number cube Event B: Flipping heads on a coin toss What is the probability of A, the probability of B, and the probability of both A and B? P(A) =P(B) = P(A and B) = Which of the following could be the perimeter of the three squares below? FREE BRAINLIEST TO WHOEVER ANSWERS CORRECT FIRST! A movie company conducts a survey using a representative sample of customers to determine their favorite type of movie. The results are shown below. Based on the survey results, how many customers are expected to prefer drama movies out of 2,500 customers? Favorite Movie Types. In PQR, sin P = 0.3, sin R = 0.8 and r = 16. Find the length of p. Please show your work. China is one of the main birthplaces of . Blank 1: Blank 2: Blank 3: Which regions population decreased the most between 1850 and 1900? please answer the following quickly!!!! One diagonal of square EFGH is shown on the coordinate grid.G04 5 6Which of the following statements is correct?A . The location of point F could be (1,6) because diagonals of a square are congruent and perpendicular.B. The location of point F could be (-1, 6) because diagonals of a square are similar and perpendicular.C. The location of point F could be (-1,6) because diagonals of a square are congruent and perpendicular.The location of point F could be (1,6) because diagonals of a square are similar and perpendicular.D. A roller coaster is only pulled to the first big hill, after that, it runs on its own. There is no motor or hitch to pull you. Its the conversion of ___________ to ________ that makes you go.a.kinetic, potential energyc.gasoline, electricityb.potential, kinetic energyd.electricity, gasoline please help me asap please ill give brainilist please Let the graph of g be a reflection in the y-axis, followed by a translation 5 units down of the graph of f(x)=3x4. Write a rule for g. Whats the volume of the cone?use the frmula V=1/3r^2h. Determine whether the figure has line, point, and/or rotational symmetry. How many Zn atoms are there in 4.65 moles of Zn?atomsSubmit AnswerRetry Entire Group9 more gra