Answer:
f-block
Explanation:
what is neutralisation reaction? why is it named so? give one example.
Answer:
In chemistry, neutralization or neutralisation is a chemical reaction in which acid and a base react quantitatively with each other. In a reaction in water, neutralization results in there being no excess of hydrogen or hydroxide ions present in the solution.Neutralization reactions are the reaction between acid and base. The products formed are water and salt. It is called so because the acid and base neutralize each other to form water and salt.Hint: The neutralization reaction is the one in which an acid reacts with an equimolar amount of base to give salt and water. The example could be a reaction between any strong acid and a base. The sodium chloride formed is a result of neutralization reaction.
Trust me mark me as brainliest trust me
¿Qué tipos de contaminantes identificamos?¿cuál de ellos tiene mayor concentración de los gases?¿Qué sucedió con la calidad del aire en el inicio de la pandemia? Y como va en la esta última semana de la pandemia?
Answer:
Bueno al principio pero empeorando con el paso del tiempo.
Explicación:
La calidad del aire es buena al inicio de la pandemia y hay menos infección en el aire pero con el paso del tiempo la infección se propaga a un ritmo más rápido y la calidad del aire se contamina con la infección que infecta a más personas. La pandemia reduce su intensidad cuando la gente sigue las reglas saludables que previenen la propagación de la pandemia en esa localidad por lo que podemos decir que la última semana de pandemia tiene menor número de pacientes.
2P(s) + X(g) ↔ P2X(g) at 20°C, Keq= 4.0 Initially, 2.0 moles of P(s) and 1.0 mole of X(g) are put into a 1.0L flask and allowed to react until they reach equilibrium. The molarity of P2X (g) present at equilibrium is: a. 1.0 M b. 0.8 M c. 0.4 M d. 0.1 M
Answer:
b. 0.8 M
Explanation:
Based on the reaction, Keq is defined as:
Keq = 4.0 = [P2X] / [X]
As P is a pure solid, its concentration is not taken into account
The initial concentration of X is 1.0mol/L = 1M, the equilibrium concentrations are:
[X] = 1M - X
[P2X] = X
Where X is the reaction coordinate
Replacing:
4.0 = X / 1-X
4.0 - 4.0X = X
4.0 = 5.0X
0.8M = X = [P2X]
Right answer is:
b. 0.8 MCells can regulate different processes in two ways. They can turn on and off the genes that make enzymes, or they can
A)
increase the activation energy of a reaction.
B)
increase the amount of energy needed to carry out the preferred process.
C)
regulate the enzymes that are already made.
D)
decrease the amount of energy needed to carry out the preferred process.
which method would be best for separating the compounds of a mixture that is made from two diffrent liquids
Answer:
fractional distillation since ot depends on the different liquids to have different boiling points
What is the [H+] if the pH of a
solution is 1.65?
a
[H+] = [ ? ] x 10!?)
Coefficient (green)
Exponent (yellow)
Enter
[tex][\text{H}^{+}] = 10^{-\text{pH}}[/tex]
[tex][\text{H}^{+}] = 10^{-1.65}[/tex]
[tex]\boxed{[\text{H}^{+}] = 2.2 × 10^{-2} \: M}[/tex]
#ILoveChemistry
#ILoveYouShaina
Atoms are attracted to each other because____
A) electrons are attracted to protons because they have opposite charges
B) magnets pull them together
C) the protons are attracted to each other because they have the same charge
D) they have some energy
SOMEONE PLEASE HELP:/!
Answer:
A
Explanation:
Opposite charges attract therefore the electrons of one atom would be attracted by the nucleus (which contains protons). This heavily relies on a property called electronegativity. Which deals with the level of attraction a nucleus (the protons in the nucleus) have for electrons of other atoms.
Cholesterol has a formula of C27H46O. What is the mass in grams of one molecule of cholesterol?
The molar mass of cholesterol = 386.654 g/mol = 387 g/mole
3.2 mg cholesterol x 1 g/1000 mg x 1 mole/387 g x 6.02x1023 molecules/mole = 5.0x1018 molecules.
The mass in grams of one molecule of cholesterol, C27H46O is 6.43×10⁻²² g
Avogadro's hypothesis6.02×10²³ molecules = 1 mole of Cholesterol
But,
1 mole of Cholesterol = 387 g
Thus,
6.02×10²³ molecules = 387 g mole of Cholesterol
How to determine the mass of one molecule6.02×10²³ molecules = 387 g mole of Cholesterol
1 molecule = 387 / 6.02×10²³
1 molecule = 6.43×10⁻²² g of Cholesterol
Thus, the mass of 1 molecule of cholesterol is 6.43×10⁻²² g
Learn more about Avogadro's number:
https://brainly.com/question/26141731
#SPJ2
can u pls answer 22, 23, 24
Answer:
I'm terribly sorry but the download is not working for me! All it says is Download pdf, and when I click it, It does nothing except for refreshing the page!
Explanation:
HELP ME PLEASE ILL MARK U THE BRAINLIEST
Answer:
pentene-alkanes-C5H10
octane-alkanes-C 8H 18
butene-alkene-c4h8
decane-alkane-c10h22
SE LES DARA EL NUMERO ATOMICO DEBERAN REALIZAR LA CONFIGURACION ELECTRONICA ESCRIBE SU NOMBRE SIMBOLO Y UBICACION EN LA TABLA PERIODICA Z- 30,58,81,17,36
Answer:
Zinc, Cerio, Talio, Cloro y Criptón.
Explicación:
El zinc es el elemento que tiene el número atómico 30 y su símbolo es Zn. Se encuentra en el grupo 2B de la tabla periódica. El cerio es el elemento que tiene el número atómico 58 y su símbolo es Ce. Se encuentra en el grupo de lantánidos de la tabla periódica. El talio es el elemento que tiene el número atómico 81 y su símbolo es Tl. Se encuentra en el tercer grupo de la tabla periódica. El cloro es el elemento que tiene el número atómico 17 y su símbolo es Cl. Se encuentra en el séptimo grupo de la tabla periódica. El criptón es el elemento que tiene el número atómico 36 y su símbolo es Kr. Se encuentra en el grupo de gases nobles, es decir, en la tabla periódica del octavo grupo.
why metals should not be disposed in landfills
Answer:
Because metal can not decompose!
The expression for the equilibrium constant for the reaction:
Ba3N2 (aq) + 6 H2O(1)-
3 Ba(OH)2 (aq) + 2 NH3 (9)
Answer:
[tex]Kc\frac{(Ba3N2)(H2O)^6}{(Ba(OH)2)^3(NH3)^2}[/tex]
Explanation:
Because kc equals products/reactants hope this helps :)
PLEASE ANSWER! WILL GIVE A LOT OF POINTS! NEEDS EXPLANATION! NO LINKS OR I'LL REPORT!! PLEASE
distilling ethanol from a wine to determine the percentage of alcohol in a wine uses what type of property
physical property
bonding property
homeowner's property
Answer:
Bonding property
Explanation:
Distillation deals with boiling solutions. Therefore the boiling point has a major part to play. Boiling point of a substance deals with the type of bonds present. For example water has hydrogen bonding which is a weak intermolecular force therefore the boiling point of water isn't that high. If we were to focus on an ionic compounds the boiling point would be higher because ionic compounds have ionic bonding which are stronger bonds which therefore requires more energy to break those bonds therefore a higher boiling point.
In this case for the ethanol to distill the property it's focusses on is the bonds. The strength of the bonds really.
Help quick, please!
which two terms are related to the energy you get by eating an apple?
chemical
kinetic
gravitational
potential
Please pick two of these!
Answer:
potential and chemical
Explanation:
How do you find the number of moles of copper in copper gluconate? In my experiment I used 1.4 g of copper gluconate, and ended up with 0.1 g of copper.
Answer: 0.0016 moles of copper are present in copper gluconate
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass.
The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Given mass of copper = 0.1 g
Molar mass of copper = 63.55 g/mol
Plugging values in equation 1:
[tex]\text{Moles of copper}=\frac{0.1g}{63.55g/mol}=0.0016 mol[/tex]
Hence, 0.0016 moles of copper are present in copper gluconate
sodium reacts with chlorine gas to form sodium chloride. if you have 60 L of chlorine gas at STP and 30 g of sodium, how many grams of salt would be formed? i know the answer is 75 grams but i need to show my work and i don't know what to write for the equation
Answer:
75.9 grams of salt
Explanation:
The reaction is the following:
2Na(s) + Cl₂(g) → 2NaCl(s) (1)
We have:
m(Na): the mass of sodium = 30 g
V(Cl₂): the volume of the chlorine gas at STP = 60 L
So, to find the mass of NaCl we need to calculate the number of moles of Na and Cl₂.
[tex] n_{Na} = \frac{m}{A_{r}} = \frac{30 g}{22.99 g/mol} = 1.30 moles [/tex]
The number of moles of Cl₂ can be found by the Ideal gas law equation:
[tex] PV = n_{Cl_{2}}RT [/tex]
Where:
P: is the pressure = 1 atm (at STP)
R: is the gas constant = 0.082 L*atm/(K*mol)
T: is the temperature = 273 K (at STP)
[tex] n_{Cl_{2}} = \frac{PV}{RT} = \frac{1 atm*60 L}{0.082 L*atm/(K*mol)*273 K} = 2.68 moles [/tex]
Now we need to find the limiting reactant. From the stoichiometric relation between Na and Cl₂ (equation 1), we have that 2 moles of Na react with 1 mol of Cl₂, so:
[tex] n_{Na} = \frac{2 moles Na}{1 mol Cl_{2}}*2.68 moles Cl_{2} = 5.36 moles [/tex]
Since we have 1.30 moles of Na, the limiting reactant is Na.
Finally, we can find the number of moles of NaCl and its mass.
[tex] n_{NaCl} = n_{Na} = 1.30 moles [/tex]
[tex] m_{NaCl} = n_{NaCl}*M = 1.30 moles*58.44 g/mol = 75.9 g [/tex]
Therefore, would be formed 75.9 grams of salt.
I hope it helps you!
Which equation represents natural transmutation?
A)238920 +23490Th + 42He
490Th
B)UFO + 6 Na →6 NaF + U
C) 2713A1 + 42He3015P+ lon
D) H2O + H+ + OH-
Answer:
answer is a
Explanation:
i hope this helps you
How many formula units are in 3.25 moles of silver nitrate
Answer:
AgNO 3 = 3.25 mol AgNO × 6.02 × 10 23 f.
Answer:
1.96 x 1024
Explanation:
Use the reaction N2(g) + 3H2(g) 2NH3(g) to answer the following questions
a. 1 pt: What does Le Châtelier's principle predict would happen to the equilibrium conditions if N2(g) + 3H2(g) were added to the system?
b. 1 pt: What would happen to the equilibrium if the pressure were decreased?
c. 2 pts: Write the equation for calculating Keq
d. 3 pts: Calculate the value for Keq given the following concentrations
[NH3] = 6 M
[H2] = 4 M
[N2] = 3 M
Answer:
cvbn
Explanation:
Question 1 of 30
Why does atomic size increase as you go down a group on the periodic table?
A. Because the number of electron shells increases
B. Because there is more total attraction between electrons in the
shells and protons in the nucleus
C. Because the number of electron shells decreases
D. Because there is less total attraction between electrons in the
shells and protons in the nucleus
SUBMI
Answer:
Explanation:
Down a group, the number of energy levels (n) increases, so there is a greater distance between the nucleus and the outermost orbital. This results in a larger atomic radius.
write the application of thermodynamic
Answer:
One of the most important things we can do with heat is to use it to do work for us. A heat engine does exactly this—it makes use of the properties of thermodynamics to transform heat into work. Gasoline and diesel engines, jet engines, and steam turbines that generate electricity are all examples of heat engines.
Total number of elements present in the 3rd period is;
How many atoms are there in total in a molecule of sulfur trioxide SO3??
Answer:
I got 1.14 mol So3 as the answer
hopefully if this could help
1. BaBr2(aq) + H2SO4(aq) →?
please balance the equation and predict the products
Answer:
BaBr2 (aq) + H2SO4 (aq) → BaSO4 (s) + 2 HBr (aq)
Explanation:
This is a precipitation reaction: BaSO4 is the formed precipitate.
What happens to the freezing point of a solution when more solute is added?
The chemical reaction
2 KBr + Cl2 → 2 KCI + Br2 is a:
a. synthesis reaction
b. decomposition reaction
C. single displacement reaction
d. double displacement reaction
e. combustion reaction
Answer:
synthesis reaction
Explanation:
the mixture of the chemical are not correct
PLSSSS HELP WILL GIVE BRAINLIEST!!!!!!!!!
Answer:
72.2 moles of water is spilled
Explanation:
as moles=mass/mr
so mr of water is 16+2=18
13000/18=72.2
for the second one you can work out the moles of o2
by using moles= number of particles /6.02*10^23
so 4.65*10^26/6.02*10^23
so i got 772.4 on my calculator to work out the amount of mass
u use the equation mass=moles*mr
so 777.2*16=12435g of oxygen gas
hope it helps :)
Answer:
ask someone else I will help later
On a graph showing distance versus time, a horizontal line represents an object that is
moving at a constant speed.
increasing its speed.
decreasing its speed.
not moving at all.
Answer:
the anwser is; B: increasing its speed
Which atom attracts electrons most strongly? br F Rb
Fluorine has the highest electronegativity in comparison to other elements therefore, the F atom attracts electrons most strongly.
What is electronegativity?The electronegativity of an atom measures the tendency of an element to attract the bonded electrons pairs towards itself. The electronegativity of an atom is determined with respect to another bonded atom.
Electronegativity can be described as a chemical property of an atom or a functional group to attract electrons toward itself. The electronegativity of an atom depends on the atomic number and the distance of valence electrons from the charged nuclei.
When two different atoms are bonded through a bond. More electronegative will attract the electron density of the bond towards itself.
As we know, the electronegativity decreases as we move down the group in the periodic table. Fluorine is the most electronegative element in the periodic table therefore, Fluorine (F) will attract the electrons toward it most strongly.
Learn more about electronegativity, here:
brainly.com/question/17762711
#SPJ6