What type of plate boundary (divergent, convergent, or transform) is typically
associated with sliding or shear forces?
convergent
transform
divergent
Answers
Answer:
transform
Explanation:
The type of plate boundary associated with sliding or shear forces is a transform plate boundary.
Two or more plates slides laterally past one another due to presence of shear forces acting on them.
In this margin, there is often an occurrence of earthquake. For a divergent margin, plates move apart and away from one another. This leads to the creation or formation of new crusts. At a convergent margin, two plates collides, a plate can subduct under another or both can become uplifted. Tectonic margins are known for their various activities.Answer:
convergent
Explanation:
Related Questions
Describe the brightness and temperature of the stars classified as giants.
Answers
Answer:
A hotter star should be brighter than a cooler star. ... Although they are cool [red], they are very luminous, and therefore bright. In the Main Sequence, stars that are cool are not as luminous. Because the energy is spread across a larger area, surface temperatures are actually cooler, reaching only 2,200 to 3,200 degrees Celsius (4,000 to 5,800 degrees Fahrenheit), a little over half as hot as the sun
Explanation:
True or false When heat flows to an object, it can change states.
Answers
Answer: True
Explanation:
The matter exists as solid, liquid or gas. These are called the states of matter. The change of matter from one state to another can be achieved by heating or cooling.
The solid state can be converted into liquid state by providing heat to solid. The heat will make the particles move farther, resulting into liquid state.
Similarly when liquid state is provided heat, it changes to gaseous state. The heat will make the particles move much more faster.
Thus the statement that when heat flows to an object, it can change states is True.
How many total ions are in 2.95 g of magnesium sulfite?
Answers
Answer:
Approximately [tex]5.65 \times 10^{-2}\; \rm mol[/tex], which is approximately [tex]3.41 \times 10^{22}[/tex] particles.
Explanation:
Formula of magnesium sulfite: [tex]\rm MgSO_3[/tex].
Look up the relative atomic mass of [tex]\rm Mg[/tex]. [tex]\rm S[/tex], and [tex]\rm O[/tex] on a modern periodic table:
[tex]\rm Mg[/tex]: [tex]24.305[/tex].[tex]\rm S[/tex]: [tex]32.06[/tex].[tex]\rm O[/tex]: [tex]15.999[/tex].The ionic compound [tex]\rm MgSO_3[/tex] consist of magnesium ions [tex]\rm {Mg}^{2+}[/tex] and sulfite ions [tex]\rm {SO_3}^{2-}[/tex].
Notice that [tex]\rm {Mg}^{2+}\![/tex] and [tex]\rm {SO_3}^{2-}\![/tex] combine at a one-to-one ratio to form the neural compound [tex]\rm MgSO_3[/tex]. Therefore, each [tex]\rm MgSO_3\![/tex] formula unit would include one [tex]\rm {Mg}^{2+}[/tex] ion and one [tex]\rm {SO_3}^{2-}[/tex] ion (that would be two ions in total).
Calculate the formula mass of one such formula unit:
[tex]\begin{aligned}&\; M(\mathrm{MgSO_3}) \\ = & \; 24.305 + 32.06 + 3 \times 15.999 \\ = & \; 104.362\; \rm g \cdot mol^{-1}\end{aligned}[/tex].
In other words, the mass of one mole of [tex]\rm MgSO_3[/tex] formula units (which includes one mole of [tex]\rm {Mg}^{2+}[/tex] ions and one mole of [tex]\rm {SO_3}^{2-}[/tex] ions) would be [tex]104.362\; \rm g[/tex].
Calculate the number of moles of such formula units in that [tex]2.95\; \rm g[/tex] of [tex]\rm MgSO_3[/tex]:
[tex]\begin{aligned}n&= \frac{m}{M}\\ &=\frac{2.95\; \rm g}{104.362\; \rm g \cdot mol^{-1}} \approx 2.82670 \times 10^{-2}\; \rm mol\end{aligned}[/tex].
There are two moles of ions in each mole of [tex]\rm MgSO_3[/tex] formula units. Therefore, that [tex]2.82670 \times 10^{-2}\; \rm mol[/tex] of [tex]\rm MgSO_3\![/tex] formula units would include approximately [tex]2 \times 2.82670 \times 10^{-2}\; \rm mol \approx 5.65\times 10^{-2}\; \rm mol[/tex] of ions.
How many hydrogen atoms Is needed for C5H8 to become saturated
Answers
Answer:
4 hydrogen atoms are needed to C5H8 to saturate it
Explanation: because C5H8 is an alkyne that contains a triple bond or alkene with 2 double bonds.
2 hydrogen atoms are needed to saturate one double bond and 4 hydrogen atoms are needed to fully Saturate a triple bond or two double bonds.
How many neutrons are in neon?
Answers
Answer:
10
Explanation:
Air has
A. a definite volume but not a definite shape
B. a definite shape but not a definite volume.
C. no definite volume or shape.
D. both a definite shape and a definite volume.
Answers
Answer would be neither!
The reason being that it can take the shape and volume of anything.
Answer:
Neither
Explanation:
hi...need help....thank you..
Answers
Answer:
36 oxygen atoms
Explanation:
From the question given above, the following data were obtained:
Compound => 4Al₂(CO₃)₃
Number of Oxygen atom in the compound =?
The number of oxygen atom in the above compound can be obtained as follow:
4Al₂(CO₃)₃
Al = 4 × 2 = 8 atoms
C = 4 × 3 × 1 = 12 atoms
O = 4 × 3 × 3 = 36 atoms
From the simple illustration made above, there are 36 oxygen atoms in the compound.
1. How many molecules of H,O are in 4.32 moles?
Answers
Answer:
dont know
Explanation:
Which of the 3 particles can never change without changing the identity of the atom?
Answers
Answer:
Neutrons,Electrons and Protons I think.
Hotter objects have _______________________ particles, while cooler objects have _______________________ particles.
Answers
Hope this helps
Hotter objects have faster particles, and cooler objects have slower particles.
Automobile catalytic converters use a platinum catalyst to reduce air pollution by changing emissions such as carbon monoxide, CO(g), into carbon dioxide, CO2(g). The uncatalyzed reaction is represented by the balanced equation below.2CO(g) O2(g) 2CO2(g) +heat. determine the mass of O2(g) required to completely react with 784g moles of CO(g) during this reaction.
Answers
Answer: 448 g of [tex]O_2[/tex] will be required to completely react with 784g moles of CO(g) during this reaction.
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} CO=\frac{784g}{28g/mol}=28moles[/tex]
The balanced chemical equation is:
[tex]2CO(g)+O_2(g)\rightarrow 2CO_2(g)[/tex]
According to stoichiometry :
2 moles of [tex]CO[/tex] require = 1 mole of [tex]O_2[/tex]
Thus 28 moles of [tex]CO[/tex] will require=[tex]\frac{1}{2}\times 28=14moles[/tex] of [tex]O_2[/tex]
Mass of [tex]O_2=moles\times {\text {Molar mass}}=14moles\times 32g/mol=448g[/tex]
Thus 448g of [tex]O_2[/tex] will be required to completely react with 784g moles of CO(g) during this reaction.
Answer:
Boy I'm really boutta get to yo pickle chin ahh boy, egg head like collard greens head a//ss boy, oh hell nah boy yo dirt ahh boy stank ahh boy afro head ahh, lip gloss chin ahh boy ugly ahh boi
Explanation:
Read the reaction and the statement.
2X(g) + Y2(g) ⇌ 2XY(s)
The equilibrium constant for the chemical reaction is found to be 20 at 150 K.
If the concentration of X is 4.0 × 10-2 M, what is the concentration of the Y2 gas?
5.50 M
8.0 M
31.25 M
40.0 M
Answers
Answer:
[Y₂] = 31.25M
Explanation:
Based on the chemical reaction:
2X(g) + Y2(g) ⇌ 2XY(s)
We must define the equilibrium constant, K as:
K = 20 = 1 / [X]²[Y₂]
Where [X] and [Y₂] are the equilibrium concentrations of each gas.
If [X] = 4.0x10⁻²M:
20 = 1 / [4.0x10⁻²M]²[Y₂]
0.032 = 1 / [Y₂]
[Y₂] = 31.25MExplain the process of ionic bond formation between K
(potassium, a metal) and Br (bromine, a nonmetal).
I
Answers
Answer:
Metals transfers electrons to nonmetals. So K transfers one electron to Br because K is located at 1A in the periodic table. Br has seven electrons, now both K and Br are stable by gaining and losing one electron. The transfer of electrons makes metals to become positive ions and nonmetal to become negative ions. When an ionic bond is formed, the charges attract each other.
Answer: Metals transfers electrons to nonmetals. Potassium -K transfers one electron to bromine- Br because K is located in group 1A on periodic table. Br has seven electrons and located group 7A. Both K and Br stable by gaining and losing one electron. The transfer of electrons makes metals to become + positive ions and nonmetal to become - negative ions. An ionic bond is formed, the charges attract each other.
Explanation: Metals donate, or transfer, electrons to the nonmetal.
The transfer of electrons creates a positive ion and a negative ion.
An ionic bond is formed when the charges attract each other.
(60 points + brain list) The correct electron configuration of the O2-ion is
A)
2-4
B)
2-5
C)
2-7
D)
2-8
Answers
A crystal of quartz may be part of granite, sandstone, and the
metamorphic rock quartzite. Identify how that same crystal could be
found in all three rocks at different times.
HELP ME WITH THIS QUESTION
Answers
Helpp
Me pls. I need help
Answers
Answer:
P = momentum
m = mass
v = velocity
Answer:
P = Momentum
M = Mass
V = Velocity
Explanation:
P = Momentum : The quantity of motion of a moving body, measured as a product of its mass and velocity.
M = Mass : A coherent, typically large body of matter with no definite shape.
V = Velocity : The speed of something in a given direction.
The sun is located in the center of our solar system. Where is the sun located in our disc-shaped
galaxy?
Answers
*Answer:-*
The sun is about 1/3 the distance from the center of the Milky Way galaxy to its outer edges. It's located in a smaller spiral arm, between two large arms, called the Orion Arm.
Can you please help me ASAP
Answers
Answer:
The Milky Way is a large barred spiral galaxy
Explanation: that has more than etc
Moles /Number of Particles Con
A) Convert the following to Moles
(1) 2.03X1022 atoms of lithium, Li
Answers
(2.03x10^22)/(6.02x10^23) = .033721 mol Li
I hope this helps, if not, i am sorry
Photosynthesis requires light, water, and CO2 to work. When one of these factors is in short supply, it is called a limiting factor. Temperature can also be a limiting factor when it is too hot or too cold for photosynthesis to work well. If you are trying to grow plants in a greenhouse, why is it important to know the limiting factor?
Answers
A farmer can be more successful in understanding which plant produces and how to grow plants with a higher degree of photosynthesis with less material and time exhaustion, by recognizing what the limiting factor is.
Hope this helps! Please correct me if I'm wrong :)
Can someone answer all 3 questions plz?
Answers
Question one should be obvious..
Mass can't be created not destroyed no matter what, so even in a chemical reaction, the answer will remain. The first answer is correct.
Question two
No, because even when water is broken down, there should only be one molecule of oxygen. The fact there is two means it's incorrect.
Question three
Yes. The equation is perfectly balanced on both sides, so it's safe to say the value of mass remains constant.
Why are summer days longer than winter days on Earth?
A. During the summer, Earth's rotational axis is parallel to the Sun's rotational axis.
B. During the summer, Earth is at the point in its orbit when it is closest to the Sun.
C. The region of Earth experiencing summer rotates past the Sun more slowly than the region experiencing winter.
D. The region of Earth experiencing summer is tilted toward the Sun while the region experiencing winter is tilted away from the Sun.
PLEASE HELP ITS A TEST
Answers
Answer:
A. During the summer, Earth's rotational axis is parallel to the Sun's rotational axis.
Explanation:
Actually, though, the Earth is tilted 23.4 degrees! (A circle is 360 degrees.) This tilt is the reason that days are longer in the summer and shorter in the winter. The hemisphere that's tilted closest to the Sun has the longest, brightest days because it gets more direct light from the Sun's rays.
Plz mark me brainliest if correct :)
During summer days, north pole of earth is exposed to sun because ofthe tilt of earth's rotational axis. Thus, The region of Earth experiencing summer is tilted toward the Sun while the region experiencing winter is tilted away from the Sun.
What is summer?Summer is a season in earth. There are different seasons in earth namely, summer, winter, spring, autumn etc. These season are arising due the revolution of earth around sun.
The distance of different regions of earth from sun changes due to the revolution of earth. Thus heat gained by these regions will be different in different seasons.
The north pole in summer gains more heat and light energy because of tilt in the axis of earth is towards the sun. Hence, the day time will be longer in summer than the winter. In winter, the earth is relatively apart from sun and thus tilt is and gains less light and heat .
To find more on seasons, refer here:
https://brainly.com/question/19009677
#SPJ6
Please help! Which Zeros are significant in the measurement .0506010 kg?
a b c d
.0506010 kg
b,c
a, b, c
b, c, d
a, b,c,d
Answers
Which feature does an iron metal have?
O electrons that transfer between atoms to make cations and anions
O a sea of electrons
O firmly bonded electrons
O electrons shared between single pairs of atoms
Answers
Answer:
a sea of electrons
Iron metal has a sea of electrons.
Iron metal is an element which possesses a sea of electrons as a result of it
containing cations which are usually surrounded by electrons which move at
a very fast pace .
This property makes Iron metal to be reactive when exposed to air( oxygen)
and it then forms various compounds such as Iron(II) oxide, Iron(III) oxide and
rust.
Read more on https://brainly.com/question/20466452
The answer is not 53.4. Please help.
Answers
Answer:
it is 0.528 ATM.
Explanation:
A scientist took notes about the fossil in the picture.
Notes:
1. The body is shaped like a fish.
2. The body has a tail shaped like a fish's tail.
3. The body has a spine and ribs.
Where is the most likely place that this animal lived long ago?
O A. desert
O B. forest
Ос.
mountain
OD. Ocean
Answers
Answer:
b. forest ....
I think ansesters also lived in forest by wearing leaves like their clothes .... etc
an object moving with a speed of 5m/s has a kinetic energy of 100J what is the mass of the object
Answers
Answer:
k. e. = 1/2 mv^2
100 = 1/2 * m * 5^2
100 = 1/2 * m * 25
m = 100 *2/25
m = 8 kg
hope it helps you
If the gas tap to the Bunsen burner is turned on, the methane does not start burning until it is lit with a match. Why is heat from the match needed to start the methane burning?
Answers
Answer:
The reaction has a high activation energy
Explanation:
The burning of methane is a spontaneous reaction. Once the burning begins, the flame is able to sustain itself without any additional input of energy. It is an exothermic reaction in which energy is given out in the form of heat.
The reason why heat from the match is needed to start the burning of methane is that the activation energy of the combustion of methane is high. Activation energy is the energy that must be supplied in order for the collision of reactants to result in chemical reaction.
As long as the activation energy is high, the reaction can not occur without an external input of energy (e.g striking a match). Hence the answer.
Density can be calculated by dividing an object's mass by its volume. If the mass of an object is 10 grams and its volume is 2 milliliters, what is its density?
Answers
Explanation:
mass =10g. volume=2ml. density=mass/volume = 10/2=5kg/m^3Answer:
5 g/mL
Explanation:
So, if the mass is 10 g and the volume is 2 mL, the density equals...
10 g ÷ 2 mL = 5 g/mL
help me with cience for brainest:) its easy:)
Answers
Answer:
Stronger
And its science
Explanation:
Answer:
stronger for top.
weaker for bottom.
passed all sciences in freshman year :D