Answers
Answer:
It will become a red giant
Explanation:
When the sun runs out of its hydrogen fuel and the hydrogen atoms are combined together to make helium atoms, it expands into a red giant, which is made up of helium atoms and gases.
Related Questions
In osmosis: a. Knowing the osmotic pressure can help determine the molar mass of a solute dissolved in a solvent. b. The semipermeable membrane is used to change the freezing and melting points of a solution. c. Solutions cannot have identical osmotic pressures. d. Temperature does not affect the osmotic pressure of a solution. e. At least two of the above statements are correct.
Answers
Answer:
a)
Explanation:
Osmosis is a process in which there is movement of solvent molecules through a semipermeable membrane to wards the higher concentration of solute or lower concentration of solvent from a lower concentration of solute molecule. Osmosis can occur in different liquids and even in gases.
Also, in osmosis knowing the osmotic pressure can help determine the molar mass of a solute dissolved in a solvent.
When a liquid is cooled kinetic energy of the particles remain the same, increase or decrease
Answers
Answer:
Decreases.............
Answer:
kinetic energy of the particles decreases
Explanation:
just remember, cold = decrease and hot = increase
Iron ore exists as Fe2O3. In order to remove the oxygen and generate pure iron, the oxygen must be transferred to another molecule. Carbon monoxide can be mixed with iron ore and carbon dioxide is generated. Carbon monoxide is produced in the combustion of carbon with limited oxygen. Calculate the value of ΔS° for the oxidation of carbon to carbon monoxide,
2C (s, graphite) + O2 (g) --> 2CO (g)
A. +179.4 J/mol K
B. +408.6 J/mol K
C. -408.6 J/mol K
D. +395.8 J/mol K
Answers
All of the following are examples of human organs EXCEPT the
1.heart
2.eyelashes.
3.skin
4. brain
It for science
Answers
Answer:
eyelashes are not a part of the the human organs
Measure the volume of the gas in the syringe.
Estimate it to the nearest 0.5 mL. mL
30.5
Intro
32.5
37.5
40.0
Answers
Answer: 47.5
Explanation:
Answer: 47.5 is your answer
Explanation:
good luck on the rest XoXo
How many valance electrons does He need to get to 8
Answers
Answer:
Any element in group 18 has eight valence electrons (except for helium, which has a total of just two electrons
A substance has a pH of 4. Is it an acid or a base?
Answers
If a balloon expands to occupy a volume of 5.25 Liters going from 15 atm to 25 atm, what was the initial volume?
03.15L
O 7.75L
Answers
Answer:
V₁ = 8.75L
Explanation:
P₁ × V₁ = P₂ × V₂
15atm × V₁ = 25atm × 5.25L
V₁ = 8.75L
What is a natural resource?
Answers
Answer:
materials or substances such as minerals, forests, water, and fertile land that occur in nature and can be used for economic gain.
Explanation:
Calculate the freezing point of a solution made by dissolving 13 g potassium sulfide in 150 g H2O Kf for water = 1.86 C/m
Answers
Answer:
[tex]T_F=-4.4\°C[/tex]
Explanation:
Hello there!
In this case, according to the given information, it is possible for us to calculate the freezing point of an aqueous solution of potassium sulfide by using the following equation:
[tex]T_F=T_{solv}-i*m*Kf[/tex]
In such a way, we firstly calculate the molality of this solution according to:
[tex]m=\frac{\frac{13g}{110.262 g/mol} }{0.150kg} =0.79m[/tex]
Finally, since the Van't Hoff's factor for K2S is 3, the freezing point of the solution turns out to be:
[tex]T_F=0\°C-3*0.79m*1.86\°C/m\\\\T_F=-4.4\°C[/tex]
Regards!
14. Simply, explain the role of both the nucleus and the ribosome in protein synthesis.
Answers
Answer:
Eukaryotic cells have a true nucleus, which means the cell's DNA is surrounded by a membrane. Therefore, the nucleus houses the cell's DNA and directs the synthesis of proteins and ribosomes, the cellular organelles responsible for protein synthesis.
Ribosomes are the sites in a cell in which protein synthesis takes place. ... Within the ribosome, the rRNA molecules direct the catalytic steps of protein synthesis — the stitching together of amino acids to make a protein molecule.
Determine la temperatura Kelvin de 2.49 moles de gas contenido en un
recipiente de 1.0 L a una presión de 143 kPa. *
Answers
Explicación:
Para encontrar la unidad de grados en Celsius (° C) en este caso, se usa la ecuación de la ley de los gases ideales.
PV = nRT
Donde P es la presión, V es el volumen, T es la temperatura, n es el número de moles y R es la constante universal de los gases.
P = 143 kPa = 1,4113 atmósferas
V = 2,00 L
n = 2,49 mol
R = 0.08205746 atm * L / mol * K
Resolver para T sería: PV / nR
T = (1.4113 atm * 2.00 L) / (2.49 mol * 0.08205746 atm * L / mol * K)
T = 2,8226 / 0,2043
T = 13,8 K = -259,35 ° C
How many grams of gas are present at 221 mL of Ar and 253 torr at -27 degree Celsius
Answers
Answer:
immma send you the link friend me on hereExplanation:
PLZ HELP ON TIMER WILL GIVE BRAINLIEST
How does technology limit the future of space exploration?
There are too many devices in space interfering with taking correct measurements.
Scientists cannot make contact with older satellites in outer space.
Scientists are able to work both with current and future technology.
Scientists must first develop certain technologies before missions can be completed.
Answers
Answer:
I would put the final answer choice: "Scientists must first develop certain technologies before missions can be completed"
Explanation:
The first option is partially true, but we have ways around it.
The second option is straight-up false.
The third option doesn't make much sense, how can one work with technology that will be developed in the future and doesn't yet exist?
Therefore, the fourth option is the best.
Hope this helps
-cyber
Helpppooo give answer thanks
Answers
Answer:
625 mL
Explanation:
From the question given above, the following data were obtained:
Volume of stock solution (V₁) = 250 mL
Molarity of stock solution (M₁) = 5 M
Molarity of diluted solution (M₂) = 2 M
Volume of diluted solution (V₂) =?
The volume of the diluted solution can be obtained by using the dilution formula as illustrated below:
M₁V₁ = M₂V₂
5 × 250 = 2 × V₂
1250 = 2 × V₂
Divide both side by 2
V₂ = 1250 / 2
V₂ = 625 mL
Therefore, the volume of the diluted solution is 625 mL.
which property of metal is used for making utensils??
Answers
Answer:
Metals are good conductors of heat. Due to this property metals are used in the preparation of kitchen utensils. Aluminium is good conductor of heat and more over it is corrosion resistent. Due to these properties aluminium is used in making kitchen utensils.
Explanation:
choose me physics subject
Answers
Explaining: i don’t know
Define, triple covalent bond
Answers
Answer:
it's a covalent linkage in which two atoms share three pairs of electrons as in nitrogen molecule or acetylene
The main biochemical components of living things are ___
Answers
Answer:
Amines ketones aldehydes and aromatic
Explanation:
my opinion but thats my answer
write one other example (other than the one in your note) of ore of the following metals
a) Aluminium
b) Lead
c) Iron
Answers
Which represents the greatest number of phosphorous
atoms?
Answers
Answer:
Helium has the most number of mol out of all the options and will thus have the highest number of atoms.
Explanation:
what is the most well known supercontinent?
Answers
Answer:
Pangaea
FILLER FILLER FILLER
how many moles of CO2 are in 35.0 liters of CO2 at STP?
Answers
Answer:
75300g ..........................
how long did it take for the moon to go around earth
Answers
Answer: about one month
Explanation:
Hi, can someone plz help me with how to answer this: The conservation of energy?
Thank You :)
Answers
Describe the differences between a geocentric model and heliocentric model. What model is the current Sun-Earth-Moon System based on?
Answers
Answer:
Geocentric is a description that says all objects, including the moon, sun and stars orbit around the Earth.
Heliocentric is a description that says all objects including the moon, Earth and stars revolve around the sun.
Most textbooks would tell you that the current system is heliocentric.
Draw the major organic product(s) of the reaction of p-bromoaniline with HNO2, HCl.
Answers
Answer:
The major product from this reaction is 4-bromobenzene diazonium chloride.
Explanation:
The reaction of p-bromoaniline with HNO2 and HCl produces diazonium salt. When primary aromatic amines are nitrosated with nitrous acid in the presence of a strong acid such as HCl, diazonium salts are frequently formed. The diazonium salts are a crucial step in the production of halides and azo compounds. The necessary reaction mechanism is depicted in the illustration in the diagram below.
PLEASE HELP, DUE AT 12:00
Answers
Answer:
5.C6.DExplanation:
YONG ISA PO ETO HINDI KO PO ALAM TOH
Which of the following statements explains how concentration of a solution affects the rate of a reaction? (5 points)
O a
When concentration decreases, kinetic energy increases.
Ob
When concentration increases, particles collide less often.
When concentration increases, particles collide more often.
Oc
Od
When concentration decreases, collision of particles increases.
Answers
Answer:
when concentration increases, particles colide more often
The statement "When concentration increases, particles collide more often" is correct.
What is concentration?A constituent's abundance divided by the entire volume of a combination is known as concentration. Mass concentration, molar concentration, number concentration, and volume concentration are all examples of mathematical descriptions.
There are much more reactant particles travelling together as the concentration of reacting species increases. Because there would be more collisions, the reaction rate will be faster. The rate of a reaction increases as the concentration of reactants increases.
To know more about concentration click here.
https://brainly.com/question/10725862.
#SPJ2
how to make 100 ml of 0.001 mM solution with 0.0405mM solution?
Answers
Answer:
Measure 2.47 mL of the stock solution (i.e 0.0405 mM) and dilute it to the 100 mL mark with water
Explanation:
To make 100 mL of 0.001 mM solution from 0.0405mM solution, we need to determine the volume of 0.0405mM solution needed. This can be obtained as follow:
Molarity of stock (M₁) = 0.0405 mM
Volume of diluted (V₂) = 100 mL
Molarity of diluted solution (M₂) = 0.001 mM
Volume of stock solution needed (V₁) =?
M₁V₁ = M₂V₂
0.0405 × V₁ = 0.001 × 100
0.0405 × V₁ = 0.1
Divide both side by 0.0405
V₁ = 0.1 / 0.0405
V₁ = 2.47 mL
Therefore, to make 100 mL of 0.001 mM solution from 0.0405mM solution, measure 2.47 mL of the stock solution (i.e 0.0405 mM) and dilute it to the 100 mL mark with water.