HF and HI are in the same period, while H2S and HCl are in the same group. HF is the stronger acid in the first pair, while HCl is the stronger acid in the second pair.
i. Across a period, binary acid strength increases from left to right, as the electronegativity of the non-metal increases, resulting in a stronger bond with hydrogen. Down a group, binary acid strength increases from top to bottom, as the size of the non-metal increases, resulting in a weaker bond with hydrogen
ii. Two important factors in determining the strength of an oxy-acid are the electronegativity of the central atom and the number of oxygen atoms attached to it. As electronegativity increases, the acidity increases, as does the number of oxygen atoms attached to the central atom.
Based on the periodic trends in acid strength, the compounds can be ranked as follows:
a. H2O < H2S < HCl < HF
b. HBrO < HCIO < HCIO4
c. FCHCOH < FCHCOH2 < FCCOH
The reason for these trends is that electronegativity and size of the non-metal, as well as the electronegativity and number of oxygen atoms in oxy-acids, all contribute to the strength of the acid. If two compounds have similar structures, their acidity can be further compared based on other factors such as bond strength or resonance stabilization.
learn more about period here
https://brainly.com/question/11155928
SPJ11
A solution of 5.00 g oxalic acid (H2C2O4, M = 90.04) in 100.0 g H2O has a freezing point of –1.31 °C. What is the percent ionization of oxalic acid in this solution? The freezing point depression constant of water is Kf= 1.86 °C m²'. %3D (A) 13.5% (B) 26.8% (C) 70.4% (D) 100%
The freezing point depression of the solution can be used to determine the number of particles (ions and/or molecules) present in the solution. In this case, since oxalic acid does not completely dissociate in water,
we assume that it is a nonelectrolyte and will not dissociate into ions. Therefore, the expected depression of the freezing point would be equal to the product of the freezing point depression constant (Kf) and the molality (mol/kg) of the solute. By calculating the molality and comparing it with the expected depression, we can we assume that it is a nonelectrolyte and will not dissociate into ions. determine the percent dissociation/ionization of oxalic acid. The calculated percent ionization of oxalic acid in this solution is approximately 26.8%, which is option (B).
Learn more about acid here:
https://brainly.com/question/14072179
#SPJ11
When 6M sodium hydroxide is added to an unknown white solid, the solid dissolves. What is a possible identity for this solid? The options include: Mg(OH)2, Al2(SO4)3, BaCO3, and AgBr. Which one would the solid be and why?
To determine the possible identity of the unknown white solid when 6M sodium hydroxide is added, we can consider the following options: Mg(OH)2, Al2(SO4)3, BaCO3, and Ag-Br.
The unknown solid is likely to be Al2(SO4)3, and here's why:
1. Mg(OH)2: Sodium hydroxide (NaOH) is a strong base, and it will not dissolve an already existing hydroxide like Mg(OH)2.
2. Al2(SO4)3: When NaOH is added to Al2(SO4)3, a double displacement reaction occurs, producing Al(OH)3 and Na2SO4. Since Al(OH)3 is soluble in excess NaOH, the solid will dissolve. This is a possible identity for the solid.
3. BaCO3: Sodium hydroxide does not dissolve carbonates like BaCO3.
4. Ag-Br: Sodium hydroxide does not dissolve silver halides like Ag-Br.
Thus, based on the given options, the unknown white solid is likely to be Al2(SO4)3, as it dissolves when 6M sodium hydroxide is added.
To know more about double displacement reaction:
https://brainly.com/question/29307794
#SPJ11
THE WITTIG REACTION—PRELAB Prelab Report: Duc at the Beginning of the Lab Period Name Lab Section (Circle One): Mon Tues Wed Thur Fri AMUPM 1 What is an ylide? 2. What color do you expect your ylide to be?
Any ylide is a molecule that contains both a positively charged carbon atom and a negatively charged atom or group of atoms.
Specifically, in the context of the Wittig-reaction, the slide is a phosphorus slide, which has a phosphorus atom bonded to a positively charged carbon atom and a negatively charged oxygen or sulfur atom.
The color of the ylide is not a characteristic that can be predicted or expected based on the information given.
The color of a molecule is dependent on its electronic structure and the energy levels of its electrons, which are determined by a variety of factors including the types of atoms present and the molecular geometry.
Without more specific information about the structure of the ylide in question, it is not possible to predict its color.
To know more about Wittig-reaction, refer here:
https://brainly.com/question/30931612#
#SPJ11
calculate δg° and kp for the following equilibrium reaction at 25°c. 2h2o(g) ⥫⥬ 2h2(g) o2(g)
At 25°C, g° = 457.14 kJ/mol and Kp = 1.15 x 10⁻²⁴.
What is the reaction's Kp value at 25 C?For the reaction KP is 1103 atm1 at 25 °C (g). Nitric oxide is present in a flask at 0.02 atm and 25 °C. If 1% of the Nitric oxide is to be changed to Nitrosyl chloride at equilibrium, x105 moles of chlorine must be added. The reaction's equilibrium temperature at which it occurs.
ΔG° = ΣΔG°(products) - ΣΔG°(reactants)
The values for ΔG°(f) for each compound are:
ΔG°(f) H2O(g) = -228.57 kJ/mol
ΔG°(f) H2(g) = 0 kJ/mol
ΔG°(f) O2(g) = 0 kJ/mol
Using these values, we can calculate:
ΔG° = 2(0 kJ/mol) - 2(0 kJ/mol) - 2(-228.57 kJ/mol) = 457.14 kJ/mol
Next, we can use the relationship between ΔG° and Kp to calculate Kp:
ΔG° = -RT ln(Kp)
where R is the gas constant (8.314 J/(mol·K)), T is the temperature in kelvin (25°C = 298 K).
457.14 kJ/mol = -8.314 J/(mol·K) × 298 K × ln(Kp)
Solving for Kp:
ln(Kp) = -54.885
Kp = e(-54.885)
Kp = 1.15 x 10⁻²⁴
To know more about Nitric oxide visit:-
https://brainly.com/question/17092405
#SPJ1
4 NH3(g) + 5 O2(g) 4 NO(g) + 6 H2O(g)
How many moles of ammonia will react with 4.6 moles of oxygen?
Answer:
The balanced chemical equation shows that 4 moles of ammonia react with 5 moles of oxygen. You have 4.6 moles of oxygen, which is more than what is needed to react with 4 moles of ammonia. Therefore, the limiting reactant is ammonia. You can use stoichiometry to calculate the number of moles of ammonia needed to react with 4.6 moles of oxygen.
4 NH3(g) + 5 O2(g) → 4 NO(g) + 6 H2O(g)
4/5 moles of O2 reacts with 4 moles of NH3.
4.6 moles of O2 reacts with (4/5) x 4.6 moles of NH3.
Therefore, 3.68 moles of NH3 will react with 4.6 moles of O2.
Explanation:
an atmospheric chemist studying the pollutant SO2, places a mixture of SO2 and O2 in a 2.00 L container at 800k and 1.90 atm. when the reaction occurs, gaseous SO3 forms, and the pressure falls to 1.65 atm. How many moles of SO3 form? using PV=nRT why can't I directly find number of SO3 moles formed using Pressure 1.65 atm?
The creation of sulphur di-oxide and consumption of oxygen as well as the formation of Sulfur trioxideall contribute to the change in pressure. To calculate the moles of Sulfur trioxide produced, further data is therefore required.
What is the process through which SO2 and O2 react?Heat is produced when sulphur di-oxideis converted to Sulfur trioxide in an exothermic reaction. Vanadium pentoxide Vanadium Oxideserves as a catalyst for the reaction. Sulphur trioxide is then dissolved in a 94% solution of Sulfuric acid to produce oleum, commonly known as fuming sulfuric acid (Disulfuric acid ).
What happens when SO2 and SO3 react as a catalyst?A crucial stage in the synthesis of sulfuric acid is the catalytic oxidation of sulphur di-oxideto Sulfur trioxide. It generates the Sulfur trioxide needed to make Sulfuric acid(l) later. Oxidation of sulphur di-oxide+0.5oxygen to Sulfur trioxide is always carried out by circulating warm sulphur di-oxide-bearing gas across horizontal catalyst beds made of Vanadium, pottasium , sodium , cesium , sulphur , oxygen, and silicon di-oxide.
To know more about Sulfur visit:-
https://brainly.com/question/31142164
#SPJ1
calculate the ph after 0.048 mol hcl is added to 1.00 l of each of the following four solutions.
1. Calculate the concentration of HCl added: moles of HCl / volume of solution (in L). 2. Calculate the new concentration of H+ ions in each solution after adding HCl.. 3. Use the pH formula: pH = -log10[H+]
To calculate the pH after 0.048 mol HCl is added to 1.00 L of each of the following four solutions, we need to use the formula pH = -log[H+].
Solution 1: 0.10 M NaOH
Before adding HCl, this solution is a strong base with a pH of 13. Therefore, [H+] = 10^-13 M. When 0.048 mol of HCl is added, it reacts with all of the OH- ions to form H2O and Cl- ions. The new concentration of H+ ions is equal to the concentration of the NaOH before the HCl was added, which is 0.10 M. Therefore, the pH after adding HCl is:
pH = -log(0.10)
pH = 1.00
Solution 2: 0.20 M NH3
Before adding HCl, this solution is a weak base with a pH of 11.31. Therefore, we need to use the equilibrium expression for the reaction between NH3 and H2O to calculate the new concentration of H+ ions after adding HCl. The equilibrium constant for this reaction is Kb = 1.8 x 10^-5.
NH3 + H2O ⇌ NH4+ + OH-
At equilibrium, [NH4+] [OH-] / [NH3] = Kb
We know that [OH-] = 10^-pOH = 10^-2.69 = 0.001
Substituting into the equation gives:
[NH4+] (0.001) / (0.20 - [NH4+]) = 1.8 x 10^-5
Solving for [NH4+] gives:
[NH4+] = 4.9 x 10^-4 M
Therefore, [H+] = Kw / [OH-] = 1 x 10^-14 / 0.001 = 1 x 10^-11 M. When 0.048 mol of HCl is added, it reacts with all of the NH3 to form NH4+ and Cl- ions. The new concentration of H+ ions is equal to the concentration of NH4+ after the HCl was added, which is 4.9 x 10^-4 M. Therefore, the pH after adding HCl is:
pH = -log(4.9 x 10^-4)
pH = 3.31
Solution 3: 0.10 M HCl
Before adding HCl, this solution is a strong acid with a pH of 1. Therefore, [H+] = 10^-1 M. When 0.048 mol of HCl is added, the total concentration of H+ ions is doubled to 0.096 M. Therefore, the pH after adding HCl is:
pH = -log(0.096)
pH = 1.02
Solution 4: 0.10 M NH4Cl
Before adding HCl, this solution is an acidic salt with a pH of 5.39. Therefore, we need to use the equilibrium expression for the reaction between NH4+ and H2O to calculate the new concentration of H+ ions after adding HCl. The equilibrium constant for this reaction is Ka = 5.6 x 10^-10.
NH4+ + H2O ⇌ NH3 + H3O+
At equilibrium, [NH3] [H3O+] / [NH4+] = Ka
We know that [NH3] = [HCl] = 0.10 M
Substituting into the equation gives:
[H3O+]^2 / (0.10 - [H3O+]) = 5.6 x 10^-10
Solving for [H3O+] gives:
[H3O+] = 7.5 x 10^-6 M
Therefore, the pH before adding HCl is:
pH = -log(7.5 x 10^-6)
pH = 5.12
When 0.048 mol of HCl is added, it reacts with all of the NH4+ ions to form H2O and Cl- ions. The new concentration of H+ ions is equal to the concentration of H3O+ before the HCl was added, which is 7.5 x 10^-6 M. Therefore, the pH after adding HCl is:
pH = -log(7.5 x 10^-6)
pH = 5.12
Note that the pH did not change significantly because the original solution was already acidic due to the presence of NH4Cl.
Learn more about NaOH here: brainly.com/question/29854404
#SPJ11
The frequency of the n = 3 to n = 2 transition for an unknown hydrogen-like ion occurs at a frequency 16 times that of the hydrogen atom. What is the identity of the ion?
The identity of the ion is Be^3+.
Based on the given information, we know that the frequency of the n = 3 to n = 2 transition for the unknown hydrogen-like ion is 16 times greater than that of the hydrogen atom.
The frequency of this transition for hydrogen is known to be 6.56 x 10^14 Hz.
Using the formula for calculating the frequency of an electron transition in a hydrogen-like ion,
we can solve for the atomic number (Z) of the unknown ion: frequency = R * (Z^2 / n^2) * (1/n_final^2 - 1/n_initial^2)
where R is the Rydberg constant, n_initial = 3, and n_final = 2.
Substituting in the values we know: 6.56 x 10^14 Hz * 16 = R * (Z^2 / 3^2) * (1/2^2 - 1/3^2)
Solving for Z, we get: Z^2 = 16 * 6 * (1/4 - 1/9) = 56
Therefore, the atomic number of the unknown ion is Z = 7.
This corresponds to nitrogen, which has 7 protons in its nucleus.
Therefore, the identity of the ion is nitrogen ion (N+).
The frequency of the n = 3 to n = 2 transition for an unknown hydrogen-like ion is 16 times that of the hydrogen atom.
To find the identity of the ion, we can use the Rydberg formula for frequency: f = R_H * Z^2 * (1/n1^2 - 1/n2^2)
Where,
f is the frequency,
R_H is the Rydberg constant for hydrogen,
Z is the atomic number,
and n1 and n2 are the initial and final energy levels, respectively.
For the unknown ion, the frequency is 16 times the frequency for hydrogen: f_ion = 16 * f_H
We can now set up a proportion: f_ion / f_H = (R_H * Z_ion^2 * (1/3^2 - 1/2^2)) / (R_H * Z_H^2 * (1/3^2 - 1/2^2))
Since f_ion = 16 * f_H:
16 = Z_ion^2 / Z_H^2
For hydrogen, Z_H = 1. Therefore: 16 = Z_ion^2
Taking the square root of both sides: Z_ion = 4
The atomic number of the ion is 4, which corresponds to beryllium. Therefore, the identity of the ion is Be^3+.
To know more about ion: brainly.com/question/3110170
#SPJ11
which factors affect the crystallinity of a polymer (select all that apply)
a. isotactic polymers always form crystals b. atactic polymers never form crystals c. only linear polymers can form crystals d. syndiotactic polymers sometimes form crystals
e. slow cooling from the molten states promotes crystal formation f. plasticizers inhibit crystal formation g. stretching the polymer tends to promote crystallization
Slow cooling from molten counties promotes crystal formation; these are the factors that influence a polymer's crystallinity.
What does the word crystal mean?crystal word MINERAL any solid composed of small molecules or atoms positioned in a regular pattern: Light is converted into electrical energy by single crystals begun to grow in a laboratory. A crystal chandelier earrings is a clear, truthful rock that's employed as jewelry.
What is the purpose of crystal?"Crystals are minerals that contain energy, and because we are made of energy, researchers can exchange energy the with crystal when designers work with it." According to Saujani, crystals serve to enhance the functionality of many ordinary objects such as watches, medical instruments, and lasers.
To know more about crystal visit
https://brainly.com/question/1212769
#SPJ1
advantage of single well titration compared to serial' titration
Serial and single well titrations are both equally effective and substantially more efficient. Unfortunately, unlike with serial titrations, there is no way to compare the results visually.
What are the absorbent, observable colours' complimentary properties?On the colour wheel, complementary hues are in opposition to one another. For instance, if red is absorbed and all other colours are reflected, we might see green, which is red's complementary colour. The fact that the average human eye can distinguish up to 4000 colours of red but only roughly 400 shades of blue is interesting to notice.
In spectroscopy, why do we utilise complimentary colours?This has to do with the anatomy of the eye and how it was created to perceive the visible spectrum of colours.
To know more about titrations visit:-
https://brainly.com/question/31271061
#SPJ1
Consider the following reaction:
CO2 (g) + CCl4 (g) <--> 2 COCl2 (g)
Use the data from the tables to calculate delta G for this reaction under the following conditions:
a) standard conditions
b) P CO2 = 0.112 atm; P CCl4 = 0.174 atm; P COCl2 = 0.744 atm
The free energy change under standard condition is -117.96 kJ/mol and the free energy change for the reaction under non-standard conditions is -106.57 kJ/mol.
To calculate the standard free energy change, we use the following equation:
ΔG° = ΣΔGf°(products) - ΣΔGf°(reactants)
where ΔGf° is the standard free energy of formation of a compound. We can find the values for ΔGf° in tables of thermodynamic data.
Using the given equation, we can find the ΔG° of the reaction as:
ΔG° = [2ΔGf°(COCl2)] - [ΔGf°(CO2) + ΔGf°(CCl4)]
From the table of standard free energy of formation (ΔGf°) values:
ΔGf°(CO2) = -394.36 kJ/mol
ΔGf°(CCl4) = -95.70 kJ/mol
ΔGf°(COCl2) = -177.16 kJ/mol
Thus, the standard free energy change is:
ΔG° = [2(-177.16 kJ/mol)] - [(-394.36 kJ/mol) + (-95.70 kJ/mol)]
ΔG° = -117.96 kJ/mol
For the reaction under non-standard conditions, we use the following equation:
ΔG = ΔG° + RT ln(Q)
where R is the gas constant, T is the temperature (in Kelvin), and Q is the reaction quotient. Q can be found using the given pressures of the reactants and products.
Q =[tex](P COCl_2)^2 / (P CO_2[/tex] ×[tex]P CCl_4)[/tex]
a) At standard conditions, the reaction quotient is:
Q = (1 atm)² / (1 atm × 1 atm) = 1
Thus, the free energy change under standard conditions is simply the standard free energy change:
ΔG = ΔG° = -117.96 kJ/mol
b) For the given pressures, the reaction quotient is:
Q = (0.744 atm)² / (0.112 atm × 0.174 atm) = 20.92
Assuming room temperature (25°C or 298 K), we can calculate the free energy change:
ΔG = ΔG° + RT ln(Q)
ΔG = -117.96 kJ/mol + (8.314 J/molK × 298 K × ln(20.92))
ΔG = -106.57 kJ/mol
Therefore, the free energy change for the reaction under non-standard conditions is -106.57 kJ/mol and ΔG under standard condition is -117.96 kJ/mol.
To know more about Standard condition refer here :
https://brainly.com/question/14039279
#SPJ11
1. if a jar test demonstrates that the optimum dosage for coagulation is 25 ppm al3 , how many lbs alum are required for a 45 mgd water treatment plant?
To calculate the amount of alum required for a 45 mg/d (million gallons per day) water treatment plant, we need to convert the units from ppm (parts per million) to lbs (pounds).
Given that the optimum dosage for coagulation is 25 ppm of Al₃+:Convert ppm to lbs per million gallons:
25 ppm Al₃+ x 1 lb Al₂(SO₄)₃ / 1000 ppm Al₃+ = 0.025 lbs Al₂(SO₄)₃ per million gallons
Calculate the total amount of alum required for the entire treatment plant:0.025 lbs Al₂(SO₄)₃ per million gallons x 45,000,000 gallons per day = 1,125 lbs Al₂(SO₄)₃ per day
Therefore, a 45 mg/d water treatment plant would require approximately 1,125 lbs of alum per day at an optimum dosage of 25 ppm Al₃+.
To know more about water treatment plants, visit:
https://brainly.com/question/30696756
#SPJ1
A 1.430g sample of a gaseous compound in a 600mL bulb has a pressure of 427 torr at 70 Celsius. Analysis shows that the compound contains 10.1% C, 0.84% H and 89.1% Cl.
a) What is the molar mass of the gas? b) what is the molecular formula of the gas?
The molar mass of the gas is 92.5 g/mol.
The molecular formula of the gas is CH₁Cl₃.
How to calculate molar mass and molecular formula?a) Use the ideal gas law to solve for the molar mass of the gas:
PV = nRT
P = 427 torr = 0.559 atm, V = 600 mL = 0.600 L, n = 1.430 g/M mol, R = 0.0821 L atm/mol K, and T=70°C = 343 K.
Plug these values into the equation and solve for M:
(0.559 atm)(0.600 L) = 1.430 g/M ⋅ (0.0821 L atm/mol K)(343 K)
M = (0.559 atm)(0.600 L)(0.0821 L atm/mol K)(343 K) / 1.430 g = 92.5 g/mol
b) Find the empirical formula by converting the percentages of each element into moles and then dividing each mole value by the smallest mole value.
The percentages of each element are:
Carbon: 10.1%
Hydrogen: 0.84%
Chlorine: 89.1%
The molar masses of each element are:
Carbon: 12.01 g/mol
Hydrogen: 1.008 g/mol
Chlorine: 35.45 g/mol
Convert the percentages of each element into moles by dividing the percentage by the molar mass of the element:
Carbon: 10.1%/12.01 g/mol = 0.84 mol
Hydrogen: 0.84%/1.008 g/mol = 0.83 mol
Chlorine: 89.1%/35.45 g/mol = 2.51 mol
Then divide each mole value by the smallest mole value, which is 0.83 mol:
Carbon: 0.84 mol/0.83 mol = 1
Hydrogen: 0.83 mol/0.83 mol = 1
Chlorine: 2.51 mol/0.83 mol = 3
The empirical formula is therefore CH₁Cl₃.
The molecular formula is a multiple of the empirical formula. We can find the molecular formula by multiplying the empirical formula by the molar mass of the gas and dividing by the molar mass of the empirical formula.
The molar mass of the gas is 92.5 g/mol. The molar mass of the empirical formula is 50.5 g/mol.
The molecular formula is therefore 1.83⋅(CH₁Cl₃)=CHCl₃
Find out more on molecular formula here: https://brainly.com/question/26388921
#SPJ1
draw the lewis structure for the sulfur trioxide so3 molecule. be sure to include all resonance structures that satisfy the octet rule.
The Lewis structure for sulfur trioxide (SO3) molecule can be drawn as follows:
O
//
O = S = O
\\
O
The two additional resonance structures are:
O
/ \\
O - S = O
\ //
O
O
//
O = S - O
//
O
In this Lewis structure, sulfur is the central atom and is bonded to three oxygen atoms through double bonds. Each oxygen atom has two lone pairs of electrons.
Sulfur trioxide is a resonance hybrid, meaning it can have multiple resonance structures that contribute to the overall structure of the molecule. The other resonance structures that satisfy the octet rule can be drawn by moving the double bond around each oxygen atom.
Learn more about The Lewis structure: https://brainly.com/question/20300458
#SPJ11
a student mixes file agno3 with excess nacl to form agcl as represented by the net ionic equation above. which of the diagrams below best represents the ions that are presnt in significant concentrations in the solution? the kso for agcl iis 1.8*10^-10
Diagrams C best represents the ions that are present in significant concentrations in the solution.
An atom or molecule is said to be an ion if more than one of its valence electrons have been gained or lost, giving it an overall positive and negative electrical charge.
In other terms, a chemical species has an unbalanced ratio of protons, which are positively charged particles to electrons (negatively charged particles). Diagrams C best represents the ions that are present in significant concentrations in the solution.
Therefore, the correct option is option A.
To know more about ions, here:
https://brainly.com/question/14982375
#SPJ1
Your question is incomplete but most probably your full question was,
Why is the infrared absorption for the stretching motion of internal alkynes rarely observed?
options:
They do not form cations.
They are too strong.
There must be a change in dipole.
They don't have hydrogens.
The infrared absorption for the stretching motion of internal alkynes is rarely observed because they do not have hydrogens.
Hydrogens that participate in the stretching motion, and a change in dipole is required for infrared absorption to occur. Infrared absorption requires a change in dipole moment, which occurs when there is a change in the distribution of electron density in the molecule. In the case of internal alkynes, the carbon-carbon triple bond has a symmetric distribution of electron density, which does not change during stretching. Therefore, there is no dipole moment change and no infrared absorption is observed for the stretching motion of internal alkynes. Therefore, internal alkynes are not able to exhibit infrared absorption for their stretching motion.
Learn more about alkynes :
https://brainly.com/question/9620187
#SPJ11
What would be the freezing point of a 1.7-mole aqueous ethylene glycol solution? The freezing point depression constant for water is 1.86 degrees Celsius per mole.
a. 3.2 degrees Celsius
b. -1.1 degrees Celsius
c. 0.0 degrees Celsius
d. -3.2 degrees Celsius
The answer is b. -1.1 degrees Celsius. The temperature at which a liquid transforms from a liquid into a solid is known as the freezing point.
To find the freezing point of the solution, we need to use the formula:
ΔT = Kf × m
where ΔT is the change in the freezing point, Kf is the freezing point depression constant for water (1.86 degrees Celsius per mole), and m is the molality of the solution.
We are given the molality of the solution, which is 1.7 moles per kilogram of water. We can convert this to moles per mole of water by dividing by the molar mass of water (18.015 g/mol):
1.7 moles / (1000 g water / 18.015 g/mol) = 0.0944 moles/mole
Now we can substitute into the formula:
ΔT = 1.86 °C/mole × 0.0944 moles/mole
ΔT = 0.176 °C
The freezing point of pure water is 0.0 degrees Celsius, so the freezing point of the solution will be:
0.0 °C - 0.176 °C = -0.176 °C
Learn more about freezing point here:
https://brainly.com/question/13874888
#SPJ11
what is equilibrium concentration of nitrous acid, hno2 (aq) (ka = 4.5 ×10-4), in a solution that has a ph of 1.65?A. 0.0032 MB. 0.49 MC. 0.022 MD. 1.1 M
When the rate of forward and backward reactions in a chemical reaction are equal, equilibrium concentration occurs. The products and reactants remain unchanged at the same time. The correct option is C.
The hydrogen ion concentration in the solution is displayed inversely on the pH scale, which is logarithmic. More exactly, the pH of a solution is equal to its hydrogen ion concentration in moles per liter divided by its negative logarithm to base 10.
pH = -log[H₃O⁺]
[tex][H_{3} O^{+} ]=10^{-pH}[/tex]
[tex][H_{3} O^{+} ]=10^{-1.65}[/tex]
[H₃O⁺] = 0.022
The dissociation of HNO₂ is:
HNO₂ ⇌ H₃O⁺ + NO₂⁻
Kₐ = [H₃O⁺][NO₂⁻] / [HNO₂]
We assumed the initial concentration of HNO₂ to be x, and the equilibrium concentration of H₃O⁺ and NO₂⁻ will also be x.
4.5 × 10⁻⁴ = (0.022)(x) / x
4.5 × 10⁻⁴ = 0.022
The equilibrium concentration of HNO₂ does not depend on the initial concentration and is solely determined by the value of Ka.
The equilibrium concentration of nitrous acid (HNO₂) in the solution is approximately 0.022 M.
Thus the correct option is C.
To know more about equilibrium concentration, visit;
https://brainly.com/question/29081847
#SPJ12
calculate the solubility of an unknown salt (in g/100 g water) if 7.743 g of the salt saturates 37.21 g of water.
The solubility of the unknown salt is 20.79 g/100 g water.
To calculate the solubility, divide the mass of the salt (7.743 g) by the mass of water (37.21 g) and multiply by 100. This gives the solubility in g/100 g water, which is 20.79 g/100 g water. Solubility represents the maximum amount of a solute that can dissolve in a solvent at a given temperature and pressure, and it is expressed as a concentration. In this case, the solubility of the salt in water is 20.79 g/100 g water at the given conditions.
learn more about solubility here:
https://brainly.com/question/28170449
#SPJ11
Oxidizing an alcohol group (CH2OH) at the end of a carbon chain to a carboxylic acid (COOH) is a) A one electron oxidation b) A two electron oxidation c) A three electron oxidation d) A four electron oxidation
Oxidizing an alcohol group (CH₂OH) at the end of a carbon chain to a carboxylic acid (COOH) is b) A two-electron oxidation. This means that the alcohol group loses two electrons during the oxidation reaction, resulting in the formation of a carboxylic acid.
The conversion of an alcohol group (CH₂OH) at the end of a carbon chain to a carboxylic acid (COOH) involves the removal of two hydrogen atoms and the addition of an oxygen atom, which is a two-electron oxidation. This process is also known as the oxidation of primary alcohol to a carboxylic acid. In contrast, a one-electron oxidation involves the removal of one electron from a molecule, while a three-electron oxidation involves the transfer of three electrons and a four-electron oxidation involves the transfer of four electrons.
Learn more about oxidation at https://brainly.com/question/4222605
#SPJ11
what is the major organic product of the following reaction? h3c ch3 ch3 kmno4 h heat
The major organic product of this reaction is not specified, as the reaction conditions provided are incomplete.
The reagent list includes [tex]KMnO_{4}[/tex], which is an oxidizing agent, and heat, which suggests a potential elimination or rearrangement reaction.
However, without a starting material or more specific reaction conditions, it is impossible to determine the major organic product.
To know more about reagent, refer here:
https://brainly.com/question/31283796#
#SPJ11
Determine the mass, in grams, of 0.650 moles of I(1 mol of I has a mass of 126.90 g). A. 34.068 gB. 82.5 g C. 78.458 g
The mass is 82.5 g, rounded to three significant numbers. The correct response is B. 82.5 g.
Does one mole weigh one gramme?The ratio between the atomic mass unit and gramme mass unit sizes affects the number in a mole, or Avogadro's number. In contrast to the mass of one hydrogen atom, which is approximately one unit, one mole of hydrogen atoms weighs about one gramme.
Why does 1 mole equal 1 gramme of atoms?Atoms per gramme One mole of an element has a mass equal to its atomic weight in grammes. a gramme-sized molecule It is referred to as a material's molecular mass, or the number of grammes of that substance.
To know more about mass visit:-
https://brainly.com/question/30388313
#SPJ1
Determine the percent dissociation of a 0.417 M solution of hypochlorous acid, HClO. The Ka for the acid is 3.5 ×10−8
The percent dissociation of the 0.417 M solution of hypochlorous acid (HClO) is approximately 0.0293%.
How to find the percent dissociation of an acid?The percent dissociation of an acid refers to the extent to which the acid molecules dissociate into ions in solution, expressed as a percentage of the initial concentration of the acid.
1. Write the dissociation equation for HClO:
HClO ⇌ H+ + ClO-
2. Set up an ICE (Initial, Change, Equilibrium) table for the dissociation:
HClO H+ ClO-
I: 0.417 0 0
C: -x +x +x
E: 0.417-x x x
3. Write the expression for the Ka:
Ka = [H+][ClO-] / [HClO]
4. Substitute the equilibrium values from the ICE table into the Ka expression:
3.5 × 10^−8 = (x)(x) / (0.417 - x)
5. Solve for x, which represents the concentration of H+ and ClO- ions at equilibrium. Since Ka is small, you can approximate that x is much smaller than 0.417, so the equation becomes:
3.5 × 10^−8 ≈ x^2 / 0.417
6. Solve for x:
x = √(3.5 × 10^−8 × 0.417) ≈ 1.22 × 10^−4
7. Calculate the percent dissociation:
Percent dissociation = (x / initial concentration) × 100%
Percent dissociation = (1.22 × 10^−4 / 0.417) × 100% ≈ 0.0293%
To know more about Percent Dissociation:
https://brainly.com/question/23153446
#SPJ11
Use data in Appendix C in the textbook to calculate ΔH∘ , ΔS∘ , and ΔG∘ at 25 ∘C for each of the following reactions.Express your answer using four significant figures.1. BaCO3(s)→BaO(s)+CO2(g)ΔH∘ = kj ΔS∘ = j/k ΔG∘ = kJ2. 2P(g)+10HF(g)→2PF5(g)+5H2(g)ΔH∘ = kj ΔS∘ = J/K ΔG∘ = kj3. K(s)+O2(g)→KO2(s)ΔH∘ = kj ΔS∘ = J/K ΔG∘ = kj
ΔH∘ = -82.8 kJ; ΔS∘ = 105.4 J/K; ΔG∘ = -61.9 kJ
The given reaction is BaCO3(s)→BaO(s)+CO2(g). Using the data in Appendix C, we can find that ΔH∘ is -82.8 kJ, ΔS∘ is 105.4 J/K, and ΔG∘ is -61.9 kJ at 25 °C. ΔH∘ represents the change in enthalpy, ΔS∘ represents the change in entropy, and ΔG∘ represents the change in Gibbs free energy at standard conditions (25 °C and 1 atm pressure).
The negative values of ΔH∘ and ΔG∘ indicate that the reaction is exothermic and spontaneous, respectively, at 25 °C.
ΔH∘ = -1586.0 kJ; ΔS∘ = -117.0 J/K; ΔG∘ = -1519.0 kJ
Explanation: The given reaction is 2P(g)+10HF(g)→2PF5(g)+5H2(g). Using the data in Appendix C, we can find that ΔH∘ is -1586.0 kJ, ΔS∘ is -117.0 J/K, and ΔG∘ is -1519.0 kJ at 25 °C.
The negative values of ΔH∘ and ΔG∘ indicate that the reaction is exothermic and spontaneous, respectively, at 25 °C. The negative value of ΔS∘ indicates a decrease in entropy during the reaction, which is not favorable for spontaneity.
ΔH∘ = 0 kJ; ΔS∘ = 77.9 J/K; ΔG∘ = -243.8 kJ
Explanation: The given reaction is K(s)+O2(g)→KO2(s). Using the data in Appendix C, we can find that ΔH∘ is 0 kJ, ΔS∘ is 77.9 J/K, and ΔG∘ is -243.8 kJ at 25 °C.
The ΔH∘ value of 0 kJ indicates that the reaction is thermally balanced, and the positive value of ΔS∘ indicates an increase in entropy during the reaction. However, the negative value of ΔG∘ indicates that the reaction is not spontaneous at 25 °C, as it requires energy input to proceed.
For more questions like Entropy click the link below:
https://brainly.com/question/13135498
#SPJ11
calculate dy dx . you need not expand your answer. y = x2 8x − 1 x2 5x − 1
Therefore, the value of dy/dx for the given equation is (-3x^2 + 38x - 3) / (x^2 - 5x - 1)^2.
To calculate dy/dx of the given equation, we can use the quotient rule. Let u = x^2 - 8x - 1 and v = x^2 - 5x - 1. Then:
y = u/v
Using the quotient rule, we get:
dy/dx = (v * du/dx - u * dv/dx) / v^2
where:
du/dx = 2x - 8
dv/dx = 2x - 5
Substituting these values, we get:
dy/dx = [(x^2 - 5x - 1) * (2x - 8) - (x^2 - 8x - 1) * (2x - 5)] / (x^2 - 5x - 1)^2
Simplifying the numerator, we get:
dy/dx = (-3x^2 + 38x - 3) / (x^2 - 5x - 1)^2
Therefore, the value of dy/dx for the given equation is (-3x^2 + 38x - 3) / (x^2 - 5x - 1)^2.
To calculate dy/dx for the given function y = (x^2 + 8x - 1)/(x^2 + 5x - 1), we will use the quotient rule. The quotient rule states that if y = u/v, then dy/dx = (v(du/dx) - u(dv/dx))/v^2.
In this case, let u = x^2 + 8x - 1 and v = x^2 + 5x - 1.
First, find du/dx:
du/dx = d(x^2 + 8x - 1)/dx = 2x + 8
Next, find dv/dx:
dv/dx = d(x^2 + 5x - 1)/dx = 2x + 5
Now apply the quotient rule:
dy/dx = [(x^2 + 5x - 1)(2x + 8) - (x^2 + 8x - 1)(2x + 5)] / (x^2 + 5x - 1)^2
That's the derivative of y with respect to x, and you don't need to expand it further.
Visit here to learn more about equation : https://brainly.com/question/28294176
#SPJ11
How many compounds with the formula C4H11N contain a 2 degree amine and a single 2 degree carbon atom?a.) 0b.) 1c.) 2d.) 3e.) 4
To determine the number of compounds with the formula C4H11N that contain a 2 degree amine and a single 2 degree carbon atom, we need to consider the possible structures of compounds with this formula.
Therefore, the answer is (b) 1.
To determine the number of compounds with the formula C4H11N that contain a 2 degree amine and a single 2 degree carbon atom, we need to consider the possible structures of compounds with this formula.
There are three isomers of C4H11N with a 2 degree amine:
1. N,N-dimethylethylamine (also known as tert-butylamine)
2. N-methyl-N-(2-propanyl)amine (also known as sec-butylamine)
3. N,N-diethylmethanamine (also known as diethylmethylamine)
Out of these three isomers, only one of them has a single 2 degree carbon atom: N-methyl-N-(2-propanyl)amine (sec-butylamine).
Therefore, the answer is (b) 1.
Visit to know more about Carbon atom:-
brainly.com/question/13255170
#SPJ11
what is the coordination number of the complex ion cu(nh3)62 ?
The coordination number of a complex ion refers to the number of ligands that are attached to the central metal ion. In the case of the complex ion cu(nh3)62, there are six ammonia (NH3) ligands attached to the central copper (Cu) ion. This means that the coordination number of the complex ion is six.
The ammonia ligands in the complex ion cu(nh3)62 are coordinate covalent bonds, meaning that they share a pair of electrons with the copper ion. These bonds create a three-dimensional structure around the copper ion, with the six ammonia ligands arranged in an octahedral shape around the central ion.
The coordination number is an important factor in determining the properties and reactivity of complex ions. It can affect the stability of the complex, its ability to undergo reactions, and its overall chemical behavior. Understanding the coordination number of a complex ion is therefore crucial in understanding its chemistry and its applications in various fields such as medicine, industry, and materials science.
For more about coordination:
https://brainly.com/question/16236454
#SPJ11
Using your current knowledge of polarity, explain w miscibility or ethanol and 1-hexanol.
Ethanol and 1-hexanol are both polar compounds due to the presence of hydroxyl groups.
They exhibit partial positive and negative charges on their atoms, allowing them to form hydrogen bonds with other polar molecules. However, 1-hexanol has a longer hydrocarbon chain than ethanol, which makes it less polar and less soluble in water.
As a result, ethanol and 1-hexanol are not miscible in each other. The difference in their polarities makes it difficult for them to form hydrogen bonds with each other. Therefore, they will tend to separate from each other in a mixture.
To know more about hydrogen bonds click on below link:
https://brainly.com/question/10904296#
#SPJ11
select all the labels which correspond with the more stable resonance structure. Multiple answers: You can select more than one option OA Primary O BSecondary C Tertiary O D Allylic OE Benzylic
the labels which correspond with the more stable resonance structure are: B. Secondary, C. Tertiary, D. Allylic, and E. Benzylic.
To determine which labels correspond with the more stable resonance structure, we need to evaluate each term:
A. Primary: Primary carbocations are less stable than secondary or tertiary carbocations due to less hyperconjugation. So, this option does not correspond to a more stable resonance structure.
B. Secondary: Secondary carbocations are more stable than primary carbocations but less stable than tertiary carbocations due to moderate hyperconjugation. This option can be considered as a relatively stable resonance structure.
C. Tertiary: Tertiary carbocations are the most stable among primary, secondary, and tertiary carbocations because of greater hyperconjugation. This option corresponds to a more stable resonance structure.
D. Allylic: Allylic carbocations are stabilized by resonance, as the positive charge can be delocalized between two carbon atoms. This option corresponds to a more stable resonance structure.
E. Benzylic: Benzylic carbocations are also stabilized by resonance, as the positive charge can be delocalized over the entire benzene ring. This option corresponds to a more stable resonance structure.
Your answer: B. Secondary, C. Tertiary, D. Allylic, and E. Benzylic.
For more such questions on resonance structure , click on:
https://brainly.com/question/419650
#SPJ11
determine which of the following contains the largest number of atoms: (a) 7.68 g of He, (b) 112 g of Fe, and (c) 389 g of Hg.
Answer: C) 112g of Fe contains the largest number of atoms.
Explanation: When you convert the grams of the elements in the question to the number of particles in 1 mole from there you would be able to determine which choice actually contains more number of atoms than the rest.
You first divide the grams given to you by the atomic mass and then multiply that number by Avogadro's number which is 6.022 x 10^23. As shown in the image.