Answer:
in mountainous regions
Explanation:
The rivers usually begins in mountainous regions. A river's source is typically located in a high area, such a mountain or a hill. A river may have several sources. Some rivers start where an underground natural spring discharges water.
What is a mountain ?A mountain is an elevated area of the crust of the Earth, typically with steep sides that reveal a substantial amount of bedrock that has been exposed.
Although definitions vary, a mountain is often taller than a hill, rising normally at least 300 meters above the surrounding terrain, and differs from a plateau in having a constrained peak region.
Every river has a beginning place where the water flow starts. We refer to this source as a headwater. Some rivers have their beginnings in hills or mountains, where rainwater or snowmelt gathers and creates little channels.
It is possible for the headwater to originate from mountain snowmelt or rainfall, but it is also possible for it to bubble up from the ground or develop at the edge of a lake or big pond.
Thus, option C is correct.
To learn more about mountain, follow the link;
https://brainly.com/question/10690247
#SPJ6
(4.1357 x 10^-15) x (5.4 x 10^2) Answer must be in scientific notation
Answer:
22×10⁻¹³
Explanation:
Scientific notation:
Scientific notation is the way to express the large value in short form.
The number in scientific notation have two parts.
The digits (decimal point will place after first digit)
× 10 ( the power which put the decimal point where it should be)
for example the number 6324.4 in scientific notation will be written as = 6.3244 × 10³
When we multiply or divide the values the number of significant figures must be equal to the less number of significant figures in given value. Thus, in given value,
(4.1357× 10⁻¹⁵) × (5.4×10²)
22×10⁻¹³
Your aquarium looks blurred and you wanted to clean it.How will you use recantation technique to separate water from the pebbles and other designs
Answer:
why do you not ask to your maam the answer
1. A cube of wood having an edge length of 15.3 cm has a mass of 2800 grams. What is the
density of the wood in g/cm3?
Answer:
a cube wood is mass ig haha sorry bby :(
Explanation:
What is the significance of an electronegativity difference of 1.7 between 2
atoms?
O A. It tells which atoms form positive ions and which atoms form
negative ions.
OB. It represents the boundary between what is considered to be an
ionic or a covalent bond.
C. It determines if the 2 atoms will react to form a molecule.
D. It identifies which metal atoms will join together to form metallic
bonds
Am
B. It represents the boundary between what is considered to be an ionic or a covalent bond.
Further explanationElectronegativity is the ability of atoms to attract electrons, especially in covalent bonds (sharing of electron pairs)
In a periodic system, electronegativity increases in a group, from bottom to top, and in a period from left to right.
From this difference in electronegativity, we can determine the ionic compound, polar or non-polar
Pauling determined the electronegativity scale (based on bond energies), between 0.7 - 4 (Fluorine has the highest number of electronegativities: 4)
Polar covalent compounds have a large electronegativity difference, while nonpolar compounds have a small electronegativity difference.
We can use the difference in electronegativity between the 2 bonded atoms to determine their polarity
<0.5: covalent non polar 0.5- 1.7: covalent polar > 1.7 : ionExample
H₂OH = 2.1
O = 3.5
H₂O = 3.5-2.1 = 1.4 >> polar
O₂= 3.5-3.5 = 0 >> non polar
What kinds of reactions are studied in electrochemistry?
A. Oxidation-reduction reactions
B. Precipitation reactions
C. Decomposition reactions
D. Double-replacement reactions
(Answer is A)
Answer:A
Explanation: A P E X
Which two elements have similar characteristic
Answer:
Ca and Ba
Explanation:
Mainly because both Ca and Ba are able to form ionic bonds also both Ba and Ca are earth, in that case they have similar characteristics
What are the things to consider in classifying the different kinds of mixture?
Answer:
Whether the mixture can be separated
I need help in chemistry!!!!!!!!!!!
Answer:
ok whats the question dude just ask :PPPPPPPPPPPPPPPPPPPPPP
OTHERWISE EOEOEEOEOEOOEOEOEOEOEOOEOWOWOWOWOW
wow is mom upide down
Explanation:
: Question List
Question 9 of 15
Total Points: 1 out of 15
The configuration notation shown is for the the element
?
1s^2 2s^2 2p^6 3s² 3p 4s^1
calcium
magnesium
potassium
sodium
Calculate the enthalpy change to raise the temperature of 180.0 g of water from 10.0°C to 40.0°C. The molar heat capacity for water is 75.3 J/Kmol. a. What values have you been given? b. What value are you trying to find? c. Which heat equation do you need? d. Now solve the problem.
Answer:
22572J
Explanation:
a) The following values have been given:
Mass of water = 180.0g
Initial temperature = 10°C
Final temperature = 40°C
molar heat capacity for water = 75.3J/Kmol
To calculate the specific heat capacity of water (c), we divide the molar heat capacity by molar mass of water (18g/mol)
That is; 75.3/18
= 4.183 Jg/K
b) The enthalpy change denoted by ∆H is the value we are trying to find.
c) To find enthalpy change (∆H), we use the formula:
∆H = m × c × ∆T
Where; m= mass
c= specific heat capacity
∆T= change in temperature =
(final temp - initial temp)
∆H = m × c × ∆T
∆H = 180 × 4.18 × (40-10)
∆H = 180 × 4.18 × 30
∆H = 22572J
give IUPAC name
CH
|
CH
|
CH3 - CH2 - C = CH-CH2 - CH3
Answer:
The IUPAC name of the given compound is Pent-1-ene.
Explanation:
Longest chain has 5 carbons and the double bond is at C-1 carbon
The density of an object is 7.3 g/mL and the volume is 0.94
mL. What is the mass of the object?
Answer:
The answer is 6.86 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question
volume = 0.94 mL
density = 7.3 g/mL
We have
mass = 7.3 × 0.94 = 6.862
We have the final answer as
6.86 gHope this helps you
Electrons will pair up in an orbital only when
Answer:
All orbitals in the same sub level have one electron
Explanation:
All orbitals in the same sub level have one electron
To compare how different types of soil absorbed water, Christian set up an experiment. He poked equal numbers and sizes of holes into the bottoms of three plastic cups. He filled one cup with sand, one with potting soil, and left one empty. He placed each cup in a stand over a beaker. Christian poured 400 mL (milliliters) of water into each of the cups. He then measured the amount of water collected in the beakers beneath each cup at 1 minute intervals for 3 minutes. What is the control in this experiment? Group of answer choices
Answer:
The empty cup
Explanation:
Got it right on the test
What is the name of this ionic compound (Fr2SO4)
Answer:
3.5: Ionic Compounds- Formulas and Names
Last updatedAug 25, 2020
3.4: An Atomic-Level Perspective of Elements and Compounds
3.6: Molecular Compounds- Formulas and Names
picture_as_pdf
Readability
Donate
6.9: Binary Ionic Compounds and Their Properties
6.18: Ionic Compounds Containing Polyatomic Ions
Learning Objectives
Derive names for common types of inorganic compounds using a systematic approach
Nomenclature, a collection of rules for naming things, is important in science and in many other situations. This module describes an approach that is used to name simple ionic and molecular compounds, such as NaCl, CaCO3, and N2O4. The simplest of these are binary compounds, those containing only two elements, but we will also consider how to name ionic compounds containing polyatomic ions, and one specific, very important class of compounds known as acids (subsequent chapters in this text will focus on these compounds in great detail). We will limit our attention here to inorganic compounds, compounds that are composed principally of elements other than carbon, and will follow the nomenclature guidelines proposed by IUPAC. The rules for organic compounds, in which carbon is the principle element, will be treated in a later chapter on organic chemistry.
Ionic Compounds
To name an inorganic compound, we need to consider the answers to several questions. First, is the compound ionic or molecular? If the compound is ionic, does the metal form ions of only one type (fixed charge) or more than one type (variable charge)? Are the ions monatomic or polyatomic? If the compound is molecular, does it contain hydrogen? If so, does it also contain oxygen? From the answers we derive, we place the compound in an appropriate category and then name it accordingly.
Compounds Containing Only Monatomic Ions
The name of a binary compound containing monatomic ions consists of the name of the cation (the name of the metal) followed by the name of the anion (the name of the nonmetallic element with its ending replaced by the suffix –ide). Some examples are given in Table 3.5.2 .
Table 3.5.1 : Names of Some Ionic Compounds
NaCl, sodium chloride Na2O, sodium oxide
KBr, potassium bromide CdS, cadmium sulfide
CaI2, calcium iodide Mg3N2, magnesium nitride
CsF, cesium fluoride Ca3P2, calcium phosphide
LiCl, lithium chloride Al4C3, aluminum carbide
Compounds Containing Polyatomic Ions
Compounds containing polyatomic ions are named similarly to those containing only monatomic ions, except there is no need to change to an –ide ending, since the suffix is already present in the name of the anion. Examples are shown in Table 3.5.2 .
Table 3.5.2 : Names of Some Polyatomic Ionic Compounds
KC2H3O2, potassium acetate (NH4)Cl, ammonium chloride
NaHCO3, sodium bicarbonate CaSO4, calcium sulfate
Al2(CO3)3, aluminum carbonate Mg3(PO4)2, magnesium phosphate
Ionic Compounds in Your Cabinets
Ionic Compound Use
NaCl, sodium chloride ordinary table salt
KI, potassium iodide added to “iodized” salt for thyroid health
NaF, sodium fluoride ingredient in toothpaste
NaHCO3, sodium bicarbonate baking soda; used in cooking (and as antacid)
Na2CO3, sodium carbonate washing soda; used in cleaning agents
NaOCl, sodium hypochlorite active ingredient in household bleach
CaCO3 calcium carbonate ingredient in antacids
Mg(OH)2, magnesium hydroxide ingredient in antacids
Al(OH)3, aluminum hydroxide ingredient in antacids
NaOH, sodium hydroxide lye; used as drain cleaner
K3PO4, potassium phosphate food additive (many purposes)
MgSO4, magnesium sulfate added to purified water
Na2HPO4, sodium hydrogen phosphate anti-caking agent; used in powdered products
Na2SO3, sodium sulfite preservative
Table 3.5.3 : Names of Some Transition Metal Ionic Compounds
Transition Metal Ionic Compound Name
FeCl3 iron(III) chloride
Hg2O mercury(I) oxide
HgO mercury(II) oxide
Cu3(PO4)2 copper(II) phosphate
Naming Ionic Compounds
Name the following ionic compounds, which contain a metal that can have more than one ionic charge:
Fe2S3
CuSe
GaN
CrCl3
Ti2(SO4)3
Solution
The anions in these compounds have a fixed negative charge (S2−, Se2− , N3−, Cl−, and SO2−4 ), and the compounds must be neutral. Because the total number of positive charges in each compound must equal the total number of negative charges, the positive ions must be Fe3+, Cu2+, Ga3+, Cr4+, and Ti3+. These charges are used in the names of the metal ions:
iron(III) sulfide
copper(II) selenide
gallium(III) nitride
chromium(III) chloride
titanium(III) sulfate
Exercise 3.5.1
Write the formulas of the following ionic compounds:
(a) chromium(III) phosphide
(b) mercury(II) sulfide
(c) manganese(II) phosphate
(d) copper(I) oxide
(e) chromium(VI) fluoride
Answer
(a) CrP; (b) HgS; (c) Mn3(PO4)2; (d) Cu2O; (e) CrF6
Explanation:
The given compound is francium sulfate.
Explanation:
While naming ionic compounds :
First, write the name of cation Then after that name of the anion.Given
The molecule formula of a compound[tex]Fr_2SO_4[/tex]:
To find:
The name of the given compound formula
Solution:
Cation in formula = [tex]Fr^+[/tex] = Francium cation
Anion in the formula= [tex]SO_4^{-2}[/tex] = Sulfate anion
So, the name of the given compound is francium sulfate.
Learn more about the naming of compounds here:
brainly.com/question/863443?referrer=searchResults
brainly.com/question/8968140?referrer=searchResults
which of the following do all living organisms have in common ?
Identify the property of the matter described below.
Alcohol floats on top of the water.
A-pH
B-conductivity
C-density
D-luster
Answer: C.
Explanation: Alcohol floats on oil and water sinks in oil. Water, alcohol, and oil layer well because of their densities, but also because the oil layer does not dissolve in either liquid. The oil keeps the water and alcohol separated so that they do not dissolve in one another. ... Water sinks because it is more dense than oil.
348 g of water starting at 4.0°Celsius is heated until his temperature is 37°Celsius. Calculate the amount of heat energy needed to cause this rise in temperature
STEP BY STEP EXPLANATION!!
Answer:
48.049 kJ or 48049 J
Explanation:
Hello again.
So we know the formula [tex]q = mc\Delta t[/tex]. c is the heat capacity but this time, it is not given. However, water has a very well known heat capacity which is 4.184 J/(g°C). This is in fact the number we refer to a calorie which is the amount of energy you burn that can raise the temperature of 1g of water by 1°C. So, plugging in values, you get the above. But double check if I am wrong.
The amount of heat energy needed to cause this rise in temperature is 48.049 kJ or 48049 J.
What is heat energy?Heat is the energy that moves from one body to another when temperatures are different. Heat passes from the hotter to the colder body when two bodies with different temperatures are brought together.
A given amount of matter's heat capacity is the amount of energy needed to raise its temperature by one degree Celsius.
The heat energy will be calculated by the formula
Q = m•C•ΔT
Where c is the heat capacity.
The m is the mass
T is the time
Mass is 348 grams
Temperature is 37°C
The change in temperature is 4.0°C to 37°C
The heat capacity of water is 4.184
Q = 348 x 4.184 x -33 = 48049.056.
Therefore, the amount of heat energy needed is 48.049 kJ or 48049 J.
Learn more about heat energy, here:
https://brainly.com/question/10162784
#SPJ2
When we mixed milk and vinegar in the lab demonstration, a/an __.
was created.
Answer:
Plastic
Explanation
Found on google
Question
What causes a water molecule to be polar?
A. The Oxygen atom is larger and stronger than the Hydrogen atoms so the electrons spend more of their time nearer the hydrogen
B. The Oxygen atom is smaller and weaker than the Hydrogen atoms so the electrons spend more of their time nearer the oxygen
C. The Oxygen atom is smaller and weaker than the Hydrogen atoms so the electrons spend more of their time nearer the hydrogen
D.The Oxygen atom is larger and stronger than the Hydrogen atoms so the electrons spend more of their time nearer the oxygen
Answer:
The correct option is D
Explanation:
Water molecules are polar because there structures are made up two sides; the positively charged side (the hydrogen side) and the negatively charged side (the oxygen side). The atoms in the water molecule are joined together by covalent bond - meaning there is sharing of electrons between the constituent atoms. The oxygen atom is bigger/larger (in size) and has a higher electronegativity (ability to attract electrons) hence, the electrons tend to spend more time around the oxygen than the hydrogen atom.
Need help plz fast it’s science
Answer:
Photosynthesis, cytoplasm, cell wall, plastid, mitochondrion
Explanation:
Ernest Rutherford's discovery led to the understanding that atoms consist mostly of empty space with
Answer: With a positively charged nucleus.
Explanation:
What explains the structure of metals and delocalized electrons?
A. the unit cell model
B. the geometric shape model
C. the covalent bond model
D. the electron sea model
What is true about the formation of a bond?
Answer:
There is an overall release of energy when bonds form.
Explanation:
There is a general release of energy when bonds form. This energy is called bond energy.
Bond energy is involved in the breakdown or formation of one or more bonds between atoms of a molecule. Atoms bond with each other to achieve their electronic stability, that is, they move from a higher energy situation to a lower energy one. With this we can state that when the bond between atoms is formed, energy is released; therefore, its breakdown depends on energy absorption.
Theorists try to find ways to explain human behavior in rational ways. It seems irrational to break rules, if we want to maintain social order. We are largely constrained by the rules and obliged to behave in a particular way or to avoid certain behaviors. What motivates people to break social rules? Do you think powerful and famous people tend to break more rules? Is it worth breaking these rules? No Response(s) Be the first to respond to the Discussion topic!
Answer:
See explanation
Explanation:
According to Burgess (1996); 'We don't break rules because it 'doesn't feel right' to do so. Some elements of personality can determine whether we will break rules or not, particularly when the moral/social-conventional distinction is taken into consideration'.
If an individual has the urge to behave in a manner that transgresses social rules, personality characteristics now come into play here. Personality traits determines whether the individual considers him/herself as bound by the rules. Some people will follow the rules absolutely while some only follow rules that they consider important, a small proportion will not follow any rule that prevents them from achieving their set objectives.
Famous people become carried away with affluence and position and tend to break more rules since they believe that they will always get away with it because of whom they are.
Irrespective of the circumstances, it is never worth it to break a rule. We always have to see ourselves as bound by rules as part of our social responsibility.
How does density affect the water cycle
Explanation:
Biological in the ocean is affected by the water cycle via the Mixed Layer Depth and Run off from land. Salinity and temperature determine the density of ocean water, and density influences the circulation. E-P determines surface salinity of the ocean, which helps determine the stability of the water column.
describe how the current modern atomic theory and model differs from the model jj Thompson proposed ?
The substances that get rid of carbamates and organophosphates are?
Answer: Alfracon
...............................
Find the unknown quantity
D=5g/cm to the 3 power
V=?
M=20g
Answer:
The answer is 4 cm³Explanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\[/tex]
From the question
mass = 20 g
density = 5 g/cm³
So we have
[tex]volume = \frac{20}{5} \\ [/tex]
We have the final answer as
4 cm³Hope this helps you
Which isotope of sulfur is the most naturally abundant
Answer:
The Isotope of sulfur.
32S 94.99% stable.
33S 0.75% Stable.
Explanation: