Answer:
4) KOH
Explanation:
Trust
0.1 M KOH has a pH greater than 7.
What is pH?
The pH of a solution is a measure of hydrogen ion (H+) concentration, which is, a measure of acidity.
What is POH?The pOH of a solution is measure of hydroxide ions (OH).which is a measure of basicity.
The pH of
CH3COOH is 2.88..КСІ is 7KOH is 12∴According to the question the pH greater than 7 is KOH
Learn more about pH here: https://brainly.com/question/172153
#SPJ#
Indicate which aqueous solution has the highest boiling point elevation. (Kb for water = 0.512 °C/m)
Answer:
carbon tetrachloride
Explanation:
Boiling point elevation of a liquid or a compound is defined as the boiling point of a liquid that is that will be higher when some other other compound is added. It means that the solution has a higher boiling point than the solvent. When a non volatile solute is added to the pure solvent like water, it results in the highest boiling point elevation.
Carbon tetrachloride, Kb = 5.03°C/m shows highest boiling point elevation when it is used to make a 0.10 m non - electrolyte solution.
Explain the difference between mass and weight and
how they are measured.
MERE
Answer:
The difference between mass and weight is that mass is the amount of matter in a material, while weight is a measure of how the force of gravity acts upon that mass. Mass is the measure of the amount of matter in a body. Mass is denoted using m or M.
Explanation:
the different between mass and weight is that the weight is the measure of the force of gravity on an object and the mass of an object will never change ,but the weight of an iteam can change based on its location
A rigid container of oxygen has a pressure of 3.5 atm and a temp of 713K, what is the pressure at 273K?
Answer:
Explanation:
This is most easily solved using Gay-Lussac's Law, which relates temperature and pressure as follows:
[tex]P_{1} T_{1} =P_{2} T_{2}[/tex]
According to Gay-Lussac's law, the pressure of oxygen gas at 273 K is 1.34 atmospheres.
Gay- Lussac's law is defined as a gas law which states that the pressure which is exerted by the gas directly varies with its temperature and at a constant volume.The law was proposed by Joseph Gay-Lussac in the year 1808.
The pressure of the gas at constant volume reduces constantly as it is cooled till it undergoes condensation .Given by P₁/T₁=P₂/T₂ which on substitution gives P₂=3.5×273/713=1.34 atm.
Thus, the pressure of oxygen gas at 273 K is 1.34 atmospheres.
Learn more about Gay-Lussac's law,here:
https://brainly.com/question/2683502
#SPJ2
If you have 730 moles of a gas at 304 Kelvin in a 4.50 Liter container what
is the pressure of that eas in atmospheres?
Answer:
4046atm
Explanation:
For this question you can use the ideal gas law,
[tex]PV=nRT[/tex]
Where P is pressure, V is volume, n is moles of substance, R is the constant, and T is the temperature.
Because of the units given, R will equal .08026[tex]P=4046 atm[/tex]
Rearrange the equation to solve for pressure:[tex]P=\frac{nRT}{V}[/tex]
Then, plug in the values (I'll be excluding units for simplicity, but they all cancel out for pressure in atm):
[tex]P=\frac{(730)(.08206)(304)}{4.5}[/tex]
This will give you:
[tex]P=4046atm[/tex]
explain why the boiling tube was slanted of the hydrated copper II sulfate
what is the molar mass of.
3 moles of iodine, 5 moles of gold, and 2.5 moles of potassium
Answer:
choices?
Explanation:
Please help me with this
Answer:
no se
ablar inglés losiento princesa
por que todo me sale en inglés?
Explicación?:
Can mixtures and compounds be separated into their elements? If so which?
Answer:
The individual components of a mixture can be physically separated from each other. Chemical compounds are very different from mixtures: The elements in a chemical compound can only be separated by destroying the compound.
On a phase change diagram, such as a heating or cooling curve, the horizontal line
indicates a time when the temperature of the substance is staying the same.
True or false
Calculate the molarity of a sugar solution if 4 liters of the solution contains 12 moles of sugar.
Answer:
3M
Explanation:
Molarity is one of the measures of the molar concentration of a solution, which can be calculated by using the formula below:
Molarity = number of moles ÷ volume
From the information given in this question, 4 liters of a solution contains 12 moles of sugar. This means that n = 12mol and V = 4L
Molarity = n/V
Molarity = 12/4
Molarity = 3
Hence, the molarity of the sugar solution is 3mol/L or 3M
People should be more concerned about the global water budget than the local water budget.
True
Or false
What change releases energy.
Answer:
When a substance changes states, it requires energy when it goes to a higher energy state and releases energy when it goes to a lower energy state. Gas has a higher energy than liquid and liquid has a higher energy than solid. The three state changes from a lower energy to a higher energy are: solid to liquid: fusion. liquid to gas: vaporization
help asap i don’t understand at all lol
Answer:
a, to reduce air bubbles
Explanation:
all its asking, is what is the purpose of the cover. and a is the most reasonable out of all of them, even though none of them make any sense.
How do doctors know that Lyme disease is caused by a bacterium and NOT a virus?
Answer: Doctors can diagnose the disease through physical findings such as a "bull's-eye" rash along with a history of symptoms. But not everyone has the rash, and not everyone can recall being bitten. Special blood tests can be taken three to four weeks after suspected contact to confirm the diagnosis.
Explanation: HOPE THIS HELPS HAVE A GOOD DAY!;)
Please help me with this homework
Answer:
Explanation:
Melting example:
Melting chocolate
Freezing example:
Freezing water to ice
Boiling example:
Water boiled in a kettle
Condensation example:
Steam from your bath/shower condenses onto the mirror
Hope this helps :)
What is the formula for the compound formed by Ca2+ and N3-?
NCa
Ca3N2
O Can
O N2Caz
O N3Ca2
O CazN3
PLEASE HELP ME, I AM DESPERATE
Explanation:
for the first one go to the website mathaway and just put the equation in and you would press graph.
There is a very slight change in gravity at the top of a mountain. Which property would most likely be less at the top of a mountain?
mass
weight
body density
body temperature
Answer:
The entity that decreases is the Weight.
Explanation:
Every object on the surface of the earth is usually pulled downwards by the action of gravity. The force or weight is W = mg
Now, the farther one gets away from the surface of the earth by climbing a mountain, the further the person is from the Earth's centre of gravity.
We know that the formula for Force of gravity away from the Earth's surface is given by;
F_g = GM1M2/r²
So the greater the distance, the lesser the gravitational force.
Now, the gravitational force equals the weight of the individual.
Thus, the entity that decreases is the Weight of the individual.
How many grams are there in 2.5 moles of C2H5OH?
2.5 moles of C2H5OH would be 115.175 grams of the same compound.
Recall that:
Mole = mass/molar massHence,
mass = mole x molar massMolar mass of C2H5OH = 46.07
Mass of 2.5 moles of C2H5OH = 2.5 x 46.07
= 115.175 grams
More on moles and mass can be found here: https://brainly.com/question/2076834?referrer=searchResults
I need help with this question please asap I would really appreciate it
Answer:
I think c
Explanation:
WILL GIVE BRAINLIEST!!!!!!!!!!!!
Consider the diagram below.
What best describes this diagram?
A) building blocks for creating fats
B) building blocks for creating proteins
C) building blocks for creating fatty acids
D) building blocks for creating carbohydrates
Answer:
B
Explanation:
building blocks for creating proteins
How many atoms are in 17 moles of O?
Answer:
67
Explanation:
The balanced chemical equation below shows the reaction between nitrogen (N2) and hydrogen (H2) to form ammonia (HN3).
N2 + 3H2 → 2NH3
If 10.0 grams of nitrogen reacts with hydrogen to form 12.0 grams of ammonia, then how many grams of hydrogen were used in this
Answer:
hope u umderstood ! if explanation needed then conta t
Nitrogen and hydrogen react to form ammonia and is a combination reaction. The grams of hydrogen used in the reaction with nitrogen to form ammonia is 2.0 grams.
What is mass in grams?Mass is the weight or the product of the volume and density of the substance. It can be calculated as, [tex]\rm volume \times density.[/tex]
Given,
Mass of nitrogen = 10.0 grams
Mass of ammonia = 12.0 grams
Mass of hydrogen = x gram
Solving for x:
[tex]\begin{aligned}\rm 10 + x &= 12\\\\\rm x &= 12.0 - 10.0\\\\&= 2.0 \;\rm grams\end{aligned}[/tex]
Therefore, 2.0 grams of hydrogen is required to react with 10.0 grams of nitrogen to produce 12.0 grams of ammonia.
Learn more about mass here:
https://brainly.com/question/6699336
If I have an unknown quantity of gas held at a temperature of 1195 K in a container with a volume of 25 liters and a pressure of 1,000 atm, how many moles of gas do I have?
How many moon phases will we view in one week?
1
2
3
4
Answer:
4
Explanation:
3. Some of the reagents used in this lab are easily confused: such as persulfate (S208?)
and thiosulfate (S20:2). A student inadvertently switched these reagents, adding the
persulfate to beaker A and thiosulfate to beaker B. How would this affect the results?
What would the student observe with respect to the mixture in beaker A?
Answer:
Different compounds are formed.
Explanation:
Due to this switching of chemicals, the result of both beakers will be different because the chemicals react with the different solution in the beaker. The composition of both chemicals are different from one another which produces different compounds or products when they are mixed with the solution so we can say that this switching of chemicals will definitely affect the results of the experiment. The student will observe the formation of different compounds and different colour of the solution.
heelp me pls :P ( rando words )
Enrichment of nuclear fuel 2 points A. increases the relative concentration of uranium-235 to 3-20% to produce energy in a power plant. B. increases the relative concentration of uranium-235 to 30-50% to avoid a nuclear explosion at higher percentages. C. increases the relative concentration of uranium-235 from 60% to 90% to achieve maximum electricity generation D. decreases the relative concentration of uranium-235 from 100% to 30-50% to avoid a nuclear explosion at higher percentages.
Answer:
B. increases the relative concentration of uranium-235 to 30-50% to avoid a nuclear explosion at higher percentages.
Explanation:
Uranium enrichment may be defined as a process which is necessary for creating effective nuclear fuel from the mined uranium by mainly increasing the percentage of the uranium-235 that undergoes fission with a thermal neutrons.
The enrichment process removes the unwanted uranium-238, thus making uranium 235 concentration higher. It takes up much work to increase the relative concentration of the uranium 235 to make it 30% to 50% so as to avoid a nuclear explosion at such higher percentages.
HEEEEELPPPPP PLZZZZZZ How many liters of water would you need to add to 4.36 moles of NaCl to create a 1.3 M solution?
Answer:
4.67 moles of Li2SO3 dissolved to make 2.04 liters of solution. 4.67 mol ... water. In the second solution, I use 1.0 mole of salt to make a 1.0 L solution. Do the two ... How many milliliters are needed to make. 100.0 mL of ... 4. If I add 25 mL of water to 125 mL of a 0.15 M Naoh solution, what will the molarity of the diluted ...
Explanation:
what is molarity of 3 mole of hydrochloric acid in 3L of water
Answer:
1
Explanation:
Molarity is simply defined as the mole of solute per unit litre of water. Mathematically, it can be expressed as:
[tex]Molarity = \frac{mole}{volume}[/tex]
With the above information in mind, we can obtain the molarity of the hydrochloric acid solution as follow:
Mole of HCl = 3 moles
Volume of water = 3 L
Molarity =?[tex]Molarity = \frac{mole}{volume}\\Molarity = \frac{3}{3}\\Molarity = 1 M[/tex]
Therefore, the molarity of the hydrochloric acid solution is 1 M.
Learn more: https://brainly.com/question/15012982