Which best describes nuclear fusion? O A nucleus spontaneously splits and absorbs energy O Two nuclei spontaneously combine and absorb energy. O A nucleus collides with a neutron and splits, releasing energy. O Nuclei combine to form a heavier nucleus, releasing energy. ​

Given :

An ideal gas contained in a cylinder with the volume 34.4L, temperature 667K and pressure 2 atm.

To Find :

What will be pressure of the gas if it is heated at 1000k and the volume becomes 50L.

Solution :

We know, by ideal gas equation :

[tex]Pv = nRT[/tex]

Now, in the given question only their are two state and also their is no leakage so amount of gas is also constant.

So,

[tex]\dfrac{P_1V_1}{T_1} = \dfrac{P_2V_2}{T_2}\\\\\dfrac{2\times 34.4}{667} = \dfrac{P_2 \times 50}{1000}\\\\P_2 = \dfrac{2\times 34.4 \times 1000}{667 \times 50}\ atm\\\\P_2 = 2.06 \ atm[/tex]

Therefore, the pressure of gas is 2.06 atm.

Answer:

The answer should be A

Explanation:

because the definition of a subscript is that they indicate the number of atoms of an element present in am molecule or formula unit.

Answer:

The first choice. The rule is go left. Those subscript numbers always talk about the element to the left of them.

Explanation:

The straight forward answer is the first one.

You should always answer that when reading the chemical make up of molecules. Let's look at some examples.

C8 H18

Consider the 8. It must be describing how many carbons there are. If it was meant for the hydrogen, then what  does the 18 mean? You wouldn't know.

Now look at something a lot more complicated.

Mg3(PO4)2

Use the going left rule. That satisfies Mg doesn't it? There are 3 of them and 3 is correct.

The two at the end is also straightforward if you think about it. It must be telling you how many molecules are in the brackets. If that were not so, then you wouldn't be able to tell what it did. So there are 2 PO4

But you still have the 4 to deal with. Use the going left rule again. 4 must be telling you how many oxygens you have inside the brackets. There are 4 of them.

Answer:

Work = 450 J

Explanation:

Force = 90N

Distance = 5m

Work = ?

The relationship between these quantities is given by the equation:

Work = Force * Distance

Work = 90 * 5

Work = 450 J

Answer:

it is your instantaneous speed

Explanation:

Answer: 0.8 m

Explanation:

Answer:

an opposite reaction

Earth's gravity is still pulling down on the rocket. When a rocket burns propellants and pushes out exhaust, that creates an upward force called thrust. To launch, the rocket needs enough propellants so that the thrust pushing the rocket up is greater than the force of gravity pulling the rocket down.

Answer:

Explanation:

When Earth passes directly between Sun and Moon, its shadow creates a lunar eclipse.

pabrainliest po plss:)

Answer:

catalpa

Explanation:

i took the test

Answer:

This question is asking to calculate the molarity of the solution based on the information provided.

The answer is 2.94M

Explanation:

Molarity of Ca(OH)2 solution = number of moles (n) ÷ volume (V)

Using the formula below to calculate number of moles of Ca(OH)2.

mole = mass/molar mass

Molar mass of Ca(OH)2 = 74 g/mol

mole = 74g/74g/mol

mole = 1mol

Volume of Ca(OH)2 solution = 340ml = 340/1000 = 0.340 L

Molarity = 1/0.340

Molarity = 2.94M

Answer:

13.32

Explanation:

pOH=-log(0.21)=0.68

pH=14-pOH=14-0.68=13.32

Taking into account the definition of frecuency, the statement "The number of waves that pass a point in 1 second" describes the frequency of a wave.

Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).

In other words, the frequency in wave phenomena, such as sound, electromagnetic waves (such as radio or light), electrical signals or other waves, expresses the number of times the phenomenon is repeated per unit of time. For example, if a wave repeats ten times per second, it means that it has a frequency of ten cycles per second.

Finally, the statement "The number of waves that pass a point in 1 second" describes the frequency of a wave.

Learn more about frequency:

https://brainly.com/question/1247008

https://brainly.com/question/12990032

#SPJ1

Answer:

Electron affinity.

Explanation:

An atom can be defined as the smallest unit comprising of matter that forms all chemical elements. Thus, atoms are basically the building blocks of matters and as such determines or defines the structure of a chemical element.

Generally, atoms are typically made up of three distinct particles and these are protons, neutrons and electrons.

Electron affinity can be defined as the ability of an atom of a chemical element to accept or accommodate an electron.

This ultimately implies that, electron affinity is the change in energy of a neutral atom of a chemical element when an electron is added to the atom to form negative ion, thus, a neutral atom gain electron.

In Chemistry, electrons can be defined as subatomic particles that are negatively charged and as such has a magnitude of -1.

Answer:

We can Interprete it as 1mole of Sodium Chloride and 1mole of Silver Nitrate React to Produce

1Mole of Silver Chloride and 1Mole of Sodium Nitrate

Answer:NaCL

Explanation:Edg

Answer:

False

Explanation:

Cows and other livestock release methane, which is a gas like Carbon Dioxide, but not the same thing, even though it does contribute into Carbon Dioxide.

Answer:

C

Explanation:

While it is common to notice that many people avoid food that contain fat due to the fact that they are avoiding the adverse implications of fat consumption, the consumption of fat also has some advantages.

Prominent among the advantages of fat in the body is that fat cushions the internal organs. This cushioning of the internal organs avoids sudden damage to these organs.

For this reason, it is necessary for humans to eat fat.

Answer:

4 mol Fe

5 mol FeCl₃

Explanation:

Step 1: Write the balanced equation

2 Fe + 3 Cl₂ ⇒ 2 FeCl₃

Step 2: Calculate how much iron (Fe) is needed to produce 4 moles of FeCl₃

According to the balanced equation, the molar ratio of Fe to FeCl₃ is 2:2.

4 mol FeCl₃ × 2 mol Fe/2 mol FeCl₃ = 4 mol Fe

Step 3: Calculate how much FeCl₃ is produced when 5 moles of Fe react in excess chlorine

According to the balanced equation, the molar ratio of Fe to FeCl₃ is 2:2.

5 mol Fe × 2 mol FeCl₃/2 mol Fe = 5 mol FeCl₃

Answer:

More particles per unit volume

Explanation:

Concentration means the amount of solute in a solution. Now, the amount of solute also means the number of particles of solute present in a solution.

Hence, when we use the term "high concentration", we imply that the amount of solute present or the number of particles present in a solution is high.

Thus, at high concentration, there are more solute particles than solvent particles in a solution.

The question the person should ask him/herself to probably check for authenticity of the drugs is "Were laboratory tests conducted by the same company that produces the ac[tex]\cap[/tex]e medicine?". Option C. This is further explained below.

Generally, scientific study is simply defined as a method that includes making conjectures and deriving answers as logical implications from the hypotheses.

In conclusion, Were laboratory tests conducted by the same company that produces the ac[tex]\cap[/tex]e medicine should be questioned as medical companies should look to other labs for authenticity confirmation.

Read more about medicine

https://brainly.com/question/5591489

#SPJ2

Answer:

[tex]\huge \fbox \pink {A}\huge \fbox \green {n}\huge \fbox \blue {s}\huge \fbox \red {w}\huge \fbox \purple {e}\huge \fbox \orange {r}[/tex]

A. Skin

Explanation:

Skin unlike teeth, bones & shells is fragile & get decomposed easily under the soil.

Answer:

um a I think because when you look at dinosaur you don't see their skin anymore just like the bones and teeth

Answer:

47730 grams.

Explanation:

First we convert 1.752x10²⁶ formula units of Ca(NO₃)₂ into moles, using Avogadro's number:

Then we convert 290.88 moles of Ca(NO₃)₂ into grams, using the molar mass of Ca(NO₃)₂:

Answer:

See answer below

Explanation:

AS we know that the valence for those metals X, Y, and Z are 1, 2 and 3, we can determine the formula of each compound.

1. Hydroxides.

An hydroxide is formed when an oxyde of a metal reacts with water. When this happens, the general molecular formula is:

Meₐ(OH)ₙ

Where:

a: valence or charge of the hydroxide (Which is -1)

n: valence of the metal.

Following this, the formula for X, Y and Z would be:

XOH

Y(OH)₂

Z(OH)₃

2. Sulphates

Sulphates follow a similar rule of hydroxide in the general molecular formula, but instead of having a charge of -1, it has a charge of -2 so:

Mₐ(SO₄)ₙ

So, following the rule:

X₂SO₄

Y₂(SO₄)₂ ------> YSO₄

Z₂(SO₄)₃

3. Hydrogens

Following the same rule as the previous, hydrogens works with a charge of -1, so:

MₐHₙ

Then:

XH

YH₂

ZH₃

4. Carbonates.

This follows the same rule as sulphates, with the same charge so:

Mₐ(CO₃)ₙ

Then:

X₂CO₃

YCO₃

Z₂(CO₃)₃

5. Nitrates

Follow the same rule as the hydroxides, with the same charge of -1.

Mₐ(NO₃)ₙ

Then:

XNO₃

Y(NO₃)₂

Z(NO₃)₂

6. Phosphates

In the case of phosphates, these have a charge of -3 so:

Mₐ(PO₄)ₙ

Then:

X₃PO₄

Y₃(PO₄)₂

Z₃(PO₄)₃ ----> ZPO₄

Hope this helps

Answer: There are 1566 joules of heat needed to raise the temperature of 30.0 g of aluminum from 22°C to 80°C, if the specific heat of aluminum is 0.90 J/g°C.

Explanation:

Given: Mass = 30.0 g

Specific heat = [tex]0.90 J/g^{o}C[/tex]

[tex]T_{1} = 22^{o}C[/tex]

[tex]T_{2} = 80^{o}C[/tex]

Formula used to calculate the heat energy requires is as follows.

[tex]q = m \times C \times (T_{2} - T_{1})[/tex]

where,

q = heat energy

m = mass of substance

C = specific heat capacity of substance

[tex]T_{1}[/tex] = initial temperature

[tex]T_{2}[/tex] = final temperature

Substitute the values into above formula as follows.

[tex]q = m \times C \times (T_{2} - T_{1})\\= 30.0 g \times 0.90 J/g^{o}C \times (80 - 22)^{o}C\\= 1566 J[/tex]

Thus, we can conclude that there are 1566 joules of heat needed to raise the temperature of 30.0 g of aluminum from 22°C to 80°C, if the specific heat of aluminum is 0.90 J/g°C.

Answer:

true

Explanation:

Answer: 10.7 grams

Therefore, 10.7 grams of Hydrogen are necessary to fully react with 50.0 grams of Nitrogen.

Answer: A 13.88 mL of the concentrated acid would be required to make 250. mL of a 1.00 M [tex]H_{2}SO_{4}[/tex] solution.

Explanation:

Given: [tex]M_{1}[/tex] = 18.0 M,     [tex]V_{1}[/tex] = ?

[tex]M_{2}[/tex] = 1.00 M,         [tex]V_{2}[/tex] = 250 mL

Formula used to calculate the volume of concentrated acid is as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]

Substitute the values into above formula as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}\\18.0 M \times V_{1} = 1.00 M \times 250 mL\\V_{1} = \frac{1.00 M \times 250 mL}{18.0 M}\\= 13.88 mL[/tex]

Thus, we can conclude that 13.88 mL of the concentrated acid would be required to make 250. mL of a 1.00 M [tex]H_{2}SO_{4}[/tex] solution.