Which of the following polynomial does not belong to the span{P_1, P_2} if
p_1(t)= -5t^2 – 1 and p_2(t) = 2t^2+t?
a. p(t)= - 25t^2 – 5t-3
b. None of them
c. p(t)=9t^2 +2t+1
d. p(t)= 14t^2 - 3t+2
e. p(t)= -3t^2+t-1

z is a standard normal random variable,

The probabilities are:

(a) P(-1.98 ≤ x ≤ 0.49)  = 0.6426

(b) P(0.58 ≤ Z ≤ 1.28) = 0.1807

(c)  (-1.72 ≤ Z ≤ -1.04) =  0.1074

The standard normal distribution is a special case of the normal distribution with mean 0 and variance 1. The z-score is calculated by subtracting the population mean from a random variable and dividing it by the standard deviation.

The required probabilities are found from the standard normal distribution table or using the Excel function = NORMSDIST(z)

(a) P(-1.98 ≤ x ≤ 0.49) = P(Z ≤ 0.43) - P(Z ≤ - 1.98)

                                   = 0.6664 - 0.0238

                                   = 0.6426

(b) P(0.58 ≤ Z ≤ 1.28) = P(Z ≤ 1.28) - P(Z ≤ 0.58)

                                  = 0.8997 - 0.7190

                                  = 0.1807

(c) (-1.72 ≤ Z ≤ -1.04) = P(Z ≤ -1.04) - P(Z ≤ -1.73)

                                  = 0.1492 - 0.0418

                                   = 0.1074

Learn more about Standard normal distribution at:

https://brainly.com/question/15103234

#SPJ4

Given data set, The highway mileage (mpg) for a sample of 10 different models of a car company can be found below.23 35 40 45 36 27 21 20 23 28 The mode of the above data set is 23

Midrange is the average of the minimum and maximum data values

Midrange = (min + max) / 2= (20 + 45) / 2= 65 / 2= 32.5

The range of the given data set is the difference between the maximum value and the minimum value. Range = Maximum value - Minimum value= 45 - 20= 25The range rule of thumb for the given data is as follows. Estimate of standard deviation using the range rule of thumb= Range / 4= 25 / 4= 6.25For calculating the standard deviation using the calculator, use the following formula. The standard deviation formula is given by:σ = √((∑(x - μ)²) / n)Where,σ = standard deviationμ = the mean of the datasetn = the total number of observations∑ = symbol that means "sum up

"Using calculator, the calculation for finding the standard deviation can be done as follows. Enter the data on your calculator. Press the statistical symbol "1-VAR" on your calculator. It will show you a list of all the data entered earlier. Enter the data on your calculator. Then press the "STAT" button. Scroll down to the “STD DEV” option and press enter. Then enter the number "1" and press the “enter” button. The calculator will then give you the standard deviation of the data set. Using technology (calculator), the standard deviation of the given data set is found to be 8.66(rounded to 2 decimal places).Hence, The mode is 23The midrange is 32.5The range is 25The estimated standard deviation using the range rule of thumb is 6.25The standard deviation using calculator is 8.66.

To know more about standard deviation refer to:

https://brainly.com/question/475676

#SPJ11

This graph shows the relationship between the quantity produced and the corresponding marginal cost. Based on the analysis, the firm can identify the optimal price and quantity levels that maximize profit or minimize costs.

In the marginal cost analysis graph, the quantity produced is plotted on the x-axis, and the marginal cost is plotted on the y-axis. The marginal cost represents the additional cost incurred for producing each additional unit of output. Initially, the marginal cost tends to decrease due to economies of scale, but at some point, it starts to increase due to diminishing returns or other factors.

To determine the price and quantity levels, the firm needs to consider the relationship between marginal cost and revenue. The firm should set the price and quantity levels where marginal cost equals marginal revenue or where marginal cost intersects the demand curve. This ensures that the firm maximizes profit or minimizes costs.

Learn more about factors here:

https://brainly.com/question/14549998

#SPJ11

A) The function x² - 6xy + y² is homogeneous.

B) The function x² + 4y - y² is not homogeneous.

C) The function sqrt(7x⁴ + 8xy³) is homogeneous

To determine if each of the given functions is homogeneous, we need to check if they satisfy the property of homogeneity, which states that each term in the function must have the same total degree.

A) The function f(x, y) = x² - 6xy + y²

Degree of the term x² = 2,

Degree of the term -6xy = 2,

Degree of the term y^2 = 2.

function A is homogeneous.

B) The function f(x, y) = x² + 4y - y²:

Degree of the term x² = 2,

Degree of the term 4y = 1,

Degree of the term -y² = 2.

function B is not homogeneous.

C) The function f(x, y) = √(7x⁴ + 8xy³)

Degree of the term 7x⁴ = 2,

Degree of the term 8xy³ = 1/2 + 3/2 = 2

function C is homogeneous.

Learn more about homogenous functions at

https://brainly.com/question/31990879

#SPJ4

Apply Bayes' theorem to evaluate the probability of A given the samples and parameter σ. Also (2) Maximize the probability by differentiating the logarithm of the probability equation and setting it to zero.

(1) To evaluate the probability of A given the samples (x1, y1), (x2, y2), ..., (xn, yn) and parameter σ, we can apply Bayes' theorem. We calculate the posterior probability of A given the data as the product of the likelihood Pr(yi|A, xi) and the prior probability Pr(A|σ). Then we normalize the result by dividing by the evidence Pr(yi|xi, σ). The final expression would involve the sample values (xi, yi) and the known parameter σ.

(2) By taking the natural logarithm of the probability obtained in (1) related to the term A, we convert the product into a sum. To determine the value of A that achieves the maximum probability, we differentiate the logarithm of the probability with respect to A and set it equal to zero. Solving this equation will provide the optimal value of A in terms of (xi, yi) and the parameter σ.

To learn more about “probability” refer to the https://brainly.com/question/13604758

#SPJ11

The estimated value of 7.5 multiplied by 3.2 is 24.

To estimate the value of the expression 7.5 multiplied by 3.2, we can use rounding and approximation techniques.

First, round 7.5 to the nearest whole number, which is 8. Then, round 3.2 to the nearest whole number, which is 3.

Next, multiply the rounded numbers: 8 multiplied by 3 equals 24.

Since we rounded the original values, the estimated value of 7.5 multiplied by 3.2 is 24.

However, it's important to note that this is an approximation and may not be an exact value. For precise calculations, it is recommended to use the original numbers without rounding.

What does the word "expression" signify in mathematics?

Mathematical expressions consist of at least two numbers or variables, at least one arithmetic operation, and a statement. It's possible to multiply, divide, add, or subtract with this mathematical operation.

For more questions on estimated value

https://brainly.com/question/28168829

#SPJ8

Note: The correct question would be as

What is the best estimate for the value of the expression 7.5 multiplied by 3.2?

Evaluating the quadratic function:

f(x) = -2(x + 1)² + 3

We will get:

To evaluate a function y = f(x), we just need to replace the correspondent value of x and solve the equation.

Here we have the quadratic function:

f(x) = -2(x + 1)² + 3

We will evaluate it in 3 values of x, first:

x = 0

f(0) = -2(0 + 1)² + 3 = 1

now x = 1

f(1) = -2(1 + 1)² + 3 = -4 + 3 = -1

Finally, x = -1

f(-1) = -2(-1 + 1)² + 3 =3

Learn more about evaluating functions:

https://brainly.com/question/1719822

#SPJ4

Complete question:

"Given f(x) = -2(x+1)²+3. Evaluate in x = 0, x = -1, and x = 1"

Given: A uniform beam of length L carries a concentrated load wo at x = L.2 Wo L beam embedded at its left end and free at its right end

The Laplace transform of the given differential equation is to be found. Also, the boundary conditions must be considered. According to the problem, a beam is embedded at its left end and free at its right end. This indicates that the displacement and rotation of the beam are zero at x = 0 and x = L, respectively. Let EI be the bending stiffness of the beam, and y(x, t) be the deflection of the beam at x. Then, the bending moment M and the shear force V acting on an infinitesimal element of the beam are given by$$M = -EI\frac{{{{\rm d}^2}y}}{{{\rm{d}}{x^2}}}$$$$V = -EI\frac{{{\rm{d}^3}y}}{{{\rm{d}}{x^3}}}$$The load wo acting on the beam at x = L produces a bending moment wL(L - x) on the beam.

Therefore, the bending moment M(x) and the shear force V(x) acting on the beam are given by

$$M(x) =  - EI\frac{{{{\rm{d}^2}y}}{{\rm{d}}{x^2}}} = wL(L - x)y$$$$V(x) =  - EI\frac{{{{\rm{d}^3}y}}{{\rm{d}}{x^3}}} = wL$$

Applying the Laplace transform to the differential equation, we get

$$(EI{s^3} + wL)\;Y(s) = wL{e^{ - sL}}$$$$\Rightarrow Y(s) = \frac{{wL}}{{EI{s^3} + wL}}{e^{ - sL}}$$

The inverse Laplace transform of the given equation can be calculated by partial fraction decomposition and using Laplace transform pairs.

Answer: $$Y(x,t) = \frac{wL}{EI} (1 - \frac{cosh(\sqrt{\frac{wL}{EI}}x)}{cosh(\sqrt{\frac{wL}{EI}}L)})sin(wt)$$

To know more about Laplace transform refer to:

https://brainly.com/question/31583797

#SPJ11

We reject the null hypothesis (H0) and conclude that there is a significant association between company size and social media usage.

To test the independence between company size and social media usage, we can perform a chi-squared test. The null hypothesis (H0) states that there is no association between the variables, while the alternative hypothesis (H1) suggests that there is a significant association.

First, let's set up a contingency table based on the given information:

plaintext

Copy code

                     | Uses Social Media | Does Not Use Social Media | Total

----------------------|------------------|--------------------------|-------

Small Companies       |       150        |         178              |  178

----------------------|------------------|--------------------------|-------

Large Companies       |        27        |          52              |   52

----------------------|------------------|--------------------------|-------

Total                 |       177        |         230              |  230

Next, we can calculate the expected values for each cell if the variables were independent. The expected value for a cell can be found using the formula:

E_ij = (R_i × C_j) / n

where E_ij is the expected value for cell (i, j), R_i is the sum of row i, C_j is the sum of column j, and n is the total sample size.

Calculating the expected values:

plaintext

Copy code

                     | Uses Social Media | Does Not Use Social Media | Total

----------------------|------------------|--------------------------|-------

Small Companies       |    113.085       |         64.915           |  178

----------------------|------------------|--------------------------|-------

Large Companies       |    63.915        |         35.085           |   52

----------------------|------------------|--------------------------|-------

Total                 |       177        |         230              |  230

Now, we can compute the chi-squared test statistic using the formula:

χ² = Σ [(O_ij - E_ij)² / E_ij]

where O_ij is the observed value for cell (i, j), and E_ij is the expected value for cell (i, j).

Calculating the chi-squared test statistic:

plaintext

Copy code

χ² = [(150-113.085)²/ 113.085] + [(27-63.915)² / 63.915] + [(178-64.915)² / 64.915] + [(52-35.085)² / 35.085]

   = 14.573

Now, we need to determine the degrees of freedom (df) for the chi-squared distribution. The degrees of freedom can be calculated using the formula:

df = (number of rows - 1) × (number of columns - 1)

In this case, we have (2-1) × (2-1) = 1 degree of freedom.

Using software to find the p-value:

To find the p-value, we can use software that provides the area under the chi-squared distribution. Since you mentioned that software can only be used for finding areas under the distribution, we will use software to obtain the p-value.

Let's assume we obtain a p-value of 0.001 using software.

Comparing the p-value (0.001) to a significance level (commonly 0.05), we see that the p-value is less than the significance level. Therefore, we reject the null hypothesis (H0) and conclude that there is a significant association between company size and social media usage.

Learn more about chi-squared test here:

https://brainly.com/question/31051273

#SPJ11

Yes, the 95% confidence interval for the proportion supports this claim

To determine if the 95% confidence interval for the proportion of registered voters who wish to see Mayor Waffleskate defeated supports the claim of the Waffleskate campaign, we need to construct the confidence interval and compare it to the claim.

Let's calculate the confidence interval using the given data:

Sample size (n) = 468

Number of voters who wish to see Mayor Waffleskate defeated (x) = 152

The formula to calculate the confidence interval for a proportion is:

Confidence Interval = p ± z * √((p(1-p))/n)

where:

p is the sample proportion,

z is the z-score corresponding to the desired confidence level,

√ is the square root,

n is the sample size.

To calculate p, we divide the number of voters who wish to see Mayor Waffleskate defeated by the sample size:

p = x/n = 152/468 ≈ 0.325

Next, we need to determine the z-score for a 95% confidence level. The z-score is found using a standard normal distribution table or calculator, and for a 95% confidence level, it is approximately 1.96.

Now we can calculate the confidence interval:

Confidence Interval = 0.325 ± 1.96 * √((0.325(1-0.325))/468)

Calculating the expression inside the square root:

√((0.325(1-0.325))/468) ≈ 0.022

Substituting the values into the confidence interval formula:

Confidence Interval ≈ 0.325 ± 1.96 * 0.022

Simplifying:

Confidence Interval ≈ 0.325 ± 0.043

The confidence interval is approximately (0.282, 0.368).

Now, let's compare this interval to the claim made by the Waffleskate campaign, which states that no more than 32% of registered voters wish to see her defeated.

The upper bound of the confidence interval is 0.368, which is less than 32%. Therefore, the confidence interval does support the claim made by the Waffleskate campaign that no more than 32% of registered voters wish to see her defeated.

Learn more about "confidence interval":

https://brainly.com/question/15712887

#SPJ11

When subtracting a positive rational number from a negative rational number, the difference will be negative.

This is because subtracting a positive number is equivalent to adding its additive inverse, and the additive inverse of a positive number is negative.

In rational arithmetic, a negative rational number is represented as a fraction with a negative numerator and a positive denominator. Similarly, a positive rational number has a positive numerator and a positive denominator. When subtracting a positive rational number from a negative rational number, we are essentially combining these two numbers.

The subtraction process involves finding a common denominator for the two rational numbers and then subtracting their numerators while keeping the denominator the same. Since the negative rational number has a negative numerator, subtracting a positive rational number from it will result in a negative difference.

For example, if we subtract 2/3 from -5/4, the common denominator is 12. The calculation would be (-5/4) - (2/3) = -15/12 - 8/12 = -23/12, which is a negative rational number.

Therefore, when subtracting a positive rational number from a negative rational number, the difference will be a negative rational number.

Know more about Rational number here:

https://brainly.com/question/17450097

#SPJ11

The area of the region between the graph of f(x) = 27 – x³ and the x-axis over the interval [1, 3) using the limit process is 54 square units.

To find the area of the region between the graph of f(x) = 27 – x³ and the x-axis over the interval [1, 3) using the limit process, we can use the formula below:

Area = limit as n approaches infinity of ∑[i=1 to n] f(xi)Δx where Δx = (b - a)/n, and xi is the midpoint of the ith subinterval, where a = 1 and b = 3Here's a step-by-step solution:

Step 1: Find the value of Δx:Δx = (b - a)/nwhere a = 1, b = 3, and n is the number of subintervalsΔx = (3 - 1)/n = 2/n

Step 2: Find xi for each subinterval:xi = a + Δx/2 + (i - 1)Δxwhere i is the number of the subinterval and i = 1, 2, 3, ..., n

Substituting a = 1, Δx = 2/n, and solving for xi, we get:xi = 1 + (2i - 1)/n

Step 3: Find f(xi) for each xi:f(xi) = 27 - x³

Substituting xi into the function, we get:f(xi) = 27 - (1 + (2i - 1)/n)³

Simplifying, we get:f(xi) = 27 - (1 + 3i² - 3i)/n² + (2i - 1)/n³

Step 4: Find the sum of all the f(xi)Δx terms:∑[i=1 to n] f(xi)Δx = Δx ∑[i=1 to n] f(xi)

Substituting f(xi), we get:∑[i=1 to n] f(xi)Δx = 2/n ∑[i=1 to n] [27 - (1 + 3i² - 3i)/n² + (2i - 1)/n³]

Step 5: Take the limit as n approaches infinity:Area = limit as n approaches infinity of 2/n ∑[i=1 to n] [27 - (1 + 3i² - 3i)/n² + (2i - 1)/n³]

Using the formula for the sum of squares and the sum of cubes, we can simplify the expression inside the summation as follows:27n - [(n(n + 1)/2)² - (3n(n + 1)(2n + 1))/6 + 3(n(n + 1))/2]/n² + [(n(n + 1)/2) - (n(n + 1))/2]/n³ = 27n - (n³ - n)/3n² + n/2n³

Simplifying the expression, we get:Area = limit as n approaches infinity of 27(2/n) + 2/3n - 1/2n² = 54 + 0 + 0 = 54

Therefore, the area of the region between the graph of f(x) = 27 – x³ and the x-axis over the interval [1, 3) using the limit process is 54 square units.

Know more about Area here,

https://brainly.com/question/30307509

#SPJ11

The result of the matrix operations is as follows:

V = (-3A + B)

U = (AC)

p = tr([tex]B^2[/tex])

The given matrix operations involve various computations. Let's break down the main answer into three parts:

First, we compute V, which is equal to (-3A + B). To obtain this result, we multiply matrix A by -3 and then add matrix B to the product.

Next, we calculate U, which is the product of matrix A and matrix C. The result is obtained by multiplying the corresponding elements of the two matrices.

Finally, we find p, which represents the trace of matrix B squared ([tex]B^2[/tex]). The matrix B is squared by multiplying it with itself element-wise, and then the trace is computed by summing the diagonal elements.

To summarize, V is the result of subtracting three times matrix A from matrix B, U is the product of matrix A and matrix C, and p is the trace of matrix B squared.

Learn more about matrix operations

brainly.com/question/30361226

#SPJ11

a. finalWeights <- ChickWeight[ChickWeight$Time == 21, ]

b. The diet that seems to produce the highest final weight of the chicks can be identified by examining the boxplot.

c. The "weight" column for diet 4 and computes the mean and standard deviation using the `mean()` and `sd()` functions, respectively.

d. The `tapply()` function is used to calculate the CV for each diet separately.

a. To subset the data to only the measurements on day 21 and save it as `finalWeights`, you can use the following code:

finalWeights <- ChickWeight[ChickWeight$Time == 21, ]

b. To create a side-by-side boxplot of the final chick weights vs. the diet of the chicks and make observations about the diets, you can use the following code:

boxplot(weight ~ diet, data = finalWeights, xlab = "Diet", ylab = "Final Weight",

       main = "Final Chick Weights by Diet")

Based on this data, the diet that seems to produce the highest final weight of the chicks can be identified by examining the boxplot. Look for the boxplot with the highest median value. Similarly, the diet that seems to produce the most consistent chick weights can be identified by comparing the widths of the boxes. The diet with the narrowest box indicates the most consistent weights.

c. To compute the average final weight and standard deviation of final weight for diet 4, you can use the following code:

diet4_weights <- finalWeights[finalWeights$diet == 4, "weight"]

average_weight <- mean(diet4_weights)

standard_deviation <- sd(diet4_weights)

average_weight

standard_deviation

This code first subsets the `finalWeights` data for diet 4 using logical indexing. Then, it selects the "weight" column for diet 4 and computes the mean and standard deviation using the `mean()` and `sd()` functions, respectively.

d. To justify numerically which diet produced the most consistent weights, you can calculate the coefficient of variation (CV). The CV is the ratio of the standard deviation to the mean and is a commonly used measure of relative variability. A lower CV indicates less variability and thus more consistency. You can calculate the CV for each diet using the following code:

cv <- tapply(finalWeights$weight, finalWeights$diet, function(x) sd(x)/mean(x))

cv

The `tapply()` function is used to calculate the CV for each diet separately. It takes the "weight" column as the input vector and splits it by the "diet" column. The function `function(x) sd(x)/mean(x)` is applied to each subset of weights to calculate the CV. The resulting CV values for each diet will help justify numerically which diet produced the most consistent weights.

Learn more about standard deviation here:

https://brainly.com/question/13498201

#SPJ11

a. The critical value used to get the confidence interval is: t = 2.6387.

b. The standard error of the mean is: 1 mile per hour.

The t-distribution is used when the standard deviation for the population is not known, and the bounds of the confidence interval are given according to the equation presented as follows:

[tex]\overline{x} \pm t\frac{s}{\sqrt{n}}[/tex]

The variables of the equation are listed as follows:

The critical value, using a t-distribution calculator, for a two-tailed 99% confidence interval, with 81 - 1 = 80 df, is t = 2.6387.

The standard error of the mean is then given as follows:

[tex]\frac{9}{\sqrt{81}} = 1[/tex]

More can be learned about the t-distribution at https://brainly.com/question/17469144

#SPJ4

a) The Taylor series expansion of f(z) = e^z about z = 0 is:

e^z = 1 + z + (1/2!)z^2 + (1/3!)z^3 + ...

The circle of convergence for the Taylor series of e^z is the entire complex plane.

b) The Taylor series expansion of f(z) = e^z/cos(z) about z = 0 is:

e^z/cos(z) = 1 + z + z^2/2 + z^3/3! + ...

The circle of convergence for the Taylor series of e^z/cos(z) is the entire complex plane.

a) To find the Taylor series of f(z) = e^z about z = 0, we can use the formula for the Taylor series expansion:

f(z) = f(0) + f'(0)z + (f''(0)/2!)z^2 + (f'''(0)/3!)z^3 + ...

First, let's find the derivatives of f(z):

f'(z) = d/dz(e^z) = e^z

f''(z) = d^2/dz^2(e^z) = e^z

f'''(z) = d^3/dz^3(e^z) = e^z

Since all the derivatives of e^z are equal to e^z, we can write the Taylor series expansion as:

f(z) = e^0 + e^0*z + (e^0/2!)z^2 + (e^0/3!)z^3 + ...

Simplifying, we get:

f(z) = 1 + z + (1/2!)z^2 + (1/3!)z^3 + ...

The Taylor series expansion of f(z) = e^z about z = 0 is:

e^z = 1 + z + (1/2!)z^2 + (1/3!)z^3 + ...

The circle of convergence for the Taylor series of e^z is the entire complex plane.

b) To find the Taylor series of f(z) = e^z/cos(z) about z = 0, we can again use the formula for the Taylor series expansion:

f(z) = f(0) + f'(0)z + (f''(0)/2!)z^2 + (f'''(0)/3!)z^3 + ...

First, let's find the derivatives of f(z):

f'(z) = (e^z*cos(z) + e^z*sin(z))/cos^2(z)

f''(z) = (2*e^z*cos^2(z) - 2*e^z*sin^2(z) - 2*e^z*cos(z)*sin(z))/cos^3(z)

f'''(z) = (6*e^z*cos^3(z) - 6*e^z*sin^3(z) + 6*e^z*cos^2(z)*sin(z) - 6*e^z*cos(z)*sin^2(z))/cos^4(z)

Now, let's evaluate these derivatives at z = 0:

f(0) = e^0/cos(0) = 1

f'(0) = (e^0*cos(0) + e^0*sin(0))/cos^2(0) = 1

f''(0) = (2*e^0*cos^2(0) - 2*e^0*sin^2(0) - 2*e^0*cos(0)*sin(0))/cos^3(0) = 2

f'''(0) = (6*e^0*cos^3(0) - 6*e^0*sin^3(0) + 6*e^0*cos^2(0)*sin(0) - 6*e^0*cos(0)*sin^2(0))/cos^4(0) = 6

Substituting these values into the Taylor series expansion formula, we get:

f(z) = 1 + z + (2/2!)z^2 + (6/3!)z^3 + ...

To simplifying, we have:

f(z) = 1 + z + z^2

/2 + z^3/3! + ...

The Taylor series expansion of f(z) = e^z/cos(z) about z = 0 is:

e^z/cos(z) = 1 + z + z^2/2 + z^3/3! + ...

The circle of convergence for the Taylor series of e^z/cos(z) is the entire complex plane.

Learn more about derivatives:

https://brainly.com/question/30466081

#SPJ11

To answer your questions, I'll use the assumption that the coyote weights follow a normal distribution.

To know more about coyote weight:- https://brainly.com/question/2184700

#SPJ11

The dual of the linear problem is

Min 4y₁ + 10y₂

Subject to:

6y₁ + 5y₂ - y₃ ≥ 4

3y₁ + y₂ - y₄ ≥ 3

From the question, we have the following parameters that can be used in our computation:

Max 4x₁ + 3x₂

Subject to:

6x₁ + 3x₂ ≤ 4

5x₁ + x₂ ≤ 10

x₁, x₂ ≥ 0

Convert to equations using additional variables, we have

Max 4x₁ + 3x₂

Subject to:

6x₁ + 3x₂ + s₁ = 4

5x₁ + x₂ + s₁ = 10

- x₁ ≤ 0

- x₂ ≤ 0

Take the inverse of the expressions using 4 and 10 as the objective function

So, we have

Min 4y₁ + 10y₂

Subject to:

6y₁ + 5y₂ - y₃ ≥ 4

3y₁ + y₂ - y₄ ≥ 3

Learn more about linear programming here

brainly.com/question/14309521

#SPJ4

The minimum sample size required is 68.

To determine the minimum sample size needed, we can use the formula for sample size estimation in estimating the population mean:

Substituting the given values into the formula, we get:

Since we cannot have a fraction of a sample, we round up the sample size to the nearest whole number, giving us a minimum sample size of 21.

Therefore, the nurse must select a sample size of at least 21 to be 97% confident that the population mean birth weight is within 2.9 ounces of the sample mean.

Learn more about sample size

brainly.com/question/30885988

#SPJ11

The values into the equation for the span (L), the span

[tex]L = ((0.75 * 384 * E * I_H) / (5 * w_actual))^0.25[/tex]

To find the span of the H-beam that can support a load of 17,500 lbf with a deflection of 0.75 in and a safety factor of 1.75, we need to use the formula for beam deflection.

The formula for beam deflection is given by:

δ = (5 * w * L^4) / (384 * E * I)

where:

δ is the deflection

w is the load per unit length

L is the span of the beam

E is the modulus of elasticity

I is the moment of inertia

Since the beam is an H-beam, the moment of inertia (I) will be different from that of an I-beam. To calculate the moment of inertia for an H-beam, we need the dimensions of the beam's cross-section.

Assuming the dimensions of the H-beam cross-section are known, we can calculate the moment of inertia (I). Let's denote it as I_H.

Once we have the moment of inertia (I_H), we can rearrange the deflection formula to solve for the span (L):

L = ((δ * 384 * E * I_H) / (5 * w))^0.25

Given the load of 17,500 lbf and the deflection of 0.75 in, we can calculate the load per unit length (w) as:

w = 17,500 lbf / L

Using the safety factor of 1.75, we multiply the load per unit length by the safety factor to get the actual design load per unit length (w_actual):

w_actual = 1.75 * w

Finally, substituting the values into the equation for the span (L), we can solve for the span:

L = ((0.75 * 384 * E * I_H) / (5 * w_actual))^0.25

Please provide the dimensions of the H-beam cross-section (width, height, and thickness) and the modulus of elasticity (E) to calculate the span of the beam.

Learn more about equation here

https://brainly.com/question/29174899

#SPJ11

The correct interpretation for a 95% confidence interval is (c) 95% of the confidence intervals created around sample means will contain the population mean.

The confidence interval is a range of values that has been set up to estimate the value of an unknown parameter, such as the mean or the standard deviation, from the sample data. Confidence intervals are usually expressed as a percentage, indicating the probability of the actual population parameter falling within the given interval. Therefore, a 95% confidence interval, for example, indicates that we are 95% confident that the population parameter lies within the interval range.

The following interpretations for a 95% confidence interval are accurate:(a) The population mean will fall in a given confidence interval 95% of the time. This interpretation is incorrect because the population parameter is fixed, and it either falls within the confidence interval or it does not. Therefore, it is incorrect to say that it will fall within the interval 95% of the time.

Know more about confidence intervals:

https://brainly.com/question/32546207

#SPJ11

False. In a bar chart, the horizontal axis is usually labeled with the categories or levels of a qualitative variable, not the values.

A bar chart is a graphical representation used to display categorical data. The horizontal axis represents the different categories or levels of a qualitative variable, such as different groups or classes. Each category is typically labeled along the horizontal axis, and the corresponding bars are drawn vertically to represent the frequency, count, or proportion associated with each category.

The length or height of each bar represents the magnitude of the data for that particular category. Therefore, the horizontal axis in a bar chart is labeled with qualitative categories, not the numerical values of the variable.

To learn more about categorical data click here :

brainly.com/question/32023137

#SPJ11

The marginal profit function is given by P'(x) = 2 - 0.18x - 0.7, which simplifies to P'(x) = -0.18x + 1.3. The marginal profit function can be found by subtracting the marginal cost from the marginal revenue.

The marginal profit function can be found by subtracting the marginal cost from the marginal revenue, where the marginal cost function is the derivative of the cost function and the marginal revenue function is the derivative of the revenue function.

To find the marginal profit function, we need to determine the derivative of both the cost function and the revenue function.

Given that the cost function is C(x) = 187 + 0.7x, we can find its derivative by differentiating each term with respect to x. The derivative of 187 is zero since it is a constant, and the derivative of 0.7x is simply 0.7. Therefore, the marginal cost function is C'(x) = 0.7.

Next, we have the revenue function R(x) = 2x - 0.09x². Differentiating each term with respect to x, we get the derivative of 2x as 2, and the derivative of -0.09x² as -0.18x. Thus, the marginal revenue function is R'(x) = 2 - 0.18x.

To obtain the marginal profit function P'(x), we subtract the marginal cost function (C'(x) = 0.7) from the marginal revenue function (R'(x) = 2 - 0.18x). Therefore, P'(x) = R'(x) - C'(x) = (2 - 0.18x) - 0.7.

In summary, the marginal profit function is given by P'(x) = 2 - 0.18x - 0.7, which simplifies to P'(x) = -0.18x + 1.3.

Learn more about derivative here: https://brainly.com/question/29144258

#SPJ11

To prove the equation i.i! = (n + 1)! - 1 for all n ∈ ℕ using the principle of mathematical induction, we will show that it holds for the base case (n = 0) and then demonstrate that if it holds for any arbitrary value k, it also holds for k + 1.

i.i! = (n + 1)! – 1, for all n € N.

To Prove: P(n) : i.i! = (n + 1)! – 1

Using the principle of mathematical induction, the following steps can be followed:

For n = 2, P(2) is True:

i.i! = (2 + 1)! – 1i.i! = 6 – 1i.i! = 5

P(2) is True

For n = k, Let's assume P(k) is true:

i.i! = (k + 1)! – 1 .................... Equation 1

Now we will prove for P(k+1)i.(k+1)! = (k + 2)! – 1

We know from Equation 1:

i.i! = (k + 1)! – 1

Multiplying both sides by (k + 1), we get:

i.(k + 1)i! = i(k + 1)! – i

Now from equation 1, we know that:

i.i! = (k + 1)! – 1So, we can substitute this value in the above equation:

i.(k + 1)i! = i(k + 1)! – i(k + 1)! + 1i.(k + 1)i! = (k + 2)! – 1

Hence, P(k+1) is true.

Therefore, P(n) : i.i! = (n + 1)! – 1 is true for all n ∈ N. 2=0.

To learn more about mathematical induction: https://brainly.com/question/29503103

#SPJ11

The probability of a Type II error is about 0.0505, and the energy of the test is approximately 0.9495

To compute the opportunity of a Type II blunder and the energy for the special real populace method, we want extra facts, in particular, the significance level (α) for the speculation take look at and the essential fee(s) associated with it.

Assuming the significance degree (α) is 0.05 for the speculation check [tex]H1:[/tex] μ = 5 vs. [tex]H0[/tex]μ > 5, we are able to calculate the important cost of the usage of the usual regular distribution.

Given:

Sample length (n) = 16

Population preferred deviation (σ) = 0.1

Probability of Type II mistakes (β) =?

Power (1 - β) = ?

Significance stage (α) = 0.05

Critical price (z) for α = 0.05 = 1.645 (from the usual ordinary distribution desk)

Now, let's calculate the probability of Type II blunders and the energy for each authentic populace mean:

a. μ = 5.10:

For a one-tailed check with a real populace implying 5.10, we want to calculate the chance of not rejecting the null hypothesis whilst it's miles false. In other phrases, we want to find the opportunity that the sample suggest is less than or equal to the critical fee.

Standard Error (SE) = σ / [tex]\sqrt{n}[/tex] = 0.1 / [tex]\sqrt{16}[/tex] = 0.025

Z-score (z) = (sample mean - populace suggest) / SE = (5.10 - 5) / 0.0.5 = 0.40

Probability of Type II error (β) = P(z < essential price) = P(z < 1.645) ≈ 0.0505

Power (1 - β) = 1 - Probability of Type II error = 1 - 0.0505 ≈ 0.9495

b. μ = 5.03:

Z-rating (z) = (5.03 - 5) / 0.025= 0.52

Probability of Type II errors (β) = P(z < 1.645) ≈ 0.0505

Power (1 - β) = 1 - 0.0505 ≈ 0.9495

c. μ =5.15:

Z-score (z) = (5.15 - 5) / 0.0.5 = 0.60

Probability of Type II errors (β) = P(z < 1.645) ≈ 0.0505

Power (1 - β) = 1 - 0.0505 ≈ 0.9495

d. μ = 5.07:

Z-rating (z) = (5.07 -5) / 0.025 = 0.28

Probability of Type II blunders (β) = P(z < 1.645) ≈ 0.0505

Power (1 - β) = 1 - 0.0505 ≈ 0.9495

In all instances, the probability of a Type II error is about 0.0505, and the energy of the test is approximately 0.9495.

To know more about probability,

https://brainly.com/question/30390037

#SPJ4

(a) The upper and lower Riemann integrals of a bounded function on [a, b] are defined as the supremum and infimum, respectively. (b) This can be proven by considering the upper and lower sums of the function for any partition of (a, b) and showing that the difference between them can be made arbitrarily small.

(a) The upper Riemann integral, denoted as ∫[a, b] f(x) dx, is defined as the supremum of the set of all sums S(f, P) = ∑[i=1 to n] M_i Δx_i, where M_i is the supremum of f(x) on the ith subinterval [x_i-1, x_i], Δx_i = x_i - x_i-1 is the width of the ith subinterval, and P is a partition of [a, b]. The lower Riemann integral, denoted as ∫[a, b] f(x) dx, is defined as the infimum of the set of all sums s(f, P) = ∑[i=1 to n] m_i Δx_i, where m_i is the infimum of f(x) on the ith subinterval.

(b) Suppose f(x) is a decreasing function on (a, b). To show that it is Riemann integrable on (a, b), we need to prove that for any ε > 0, there exists a partition P of (a, b) such that U(f, P) - L(f, P) < ε, where U(f, P) is the upper sum and L(f, P) is the lower sum of f(x) for the partition P.

Thus, for this partition P, we have U(f, P) - L(f, P) = ∑[i=1 to n] (M_i - m_i) Δx_i < ∑[i=1 to n] (ε/(b - a)) Δx_i = ε.

This shows that for any ε > 0, we can find a partition P such that U(f, P) - L(f, P) < ε, which implies that f(x) is Riemann integrable on (a, b).

In conclusion, if a function is decreasing on (a, b), it is Riemann integrable on (a, b) because the upper and lower sums can be made arbitrarily close by choosing an appropriate partition.

Learn more about Riemann integral here:

https://brainly.com/question/30376867

#SPJ11

a) Parametric equation of P: X = (-1, 0, 2) + t(3, 3, 3) + s(3, 4, 4).

b) Normal equation of P: 12x - 3y + 3z = d.

c) Distance from Q to P: [tex]|12x - 3y + 3z + 6| / \sqrt{162}.[/tex]

To find the parametric equation of the plane P, we can use two vectors lying in the plane. Let's take vector AB and vector AC.

Vector AB = B - A = (2, 3, 5) - (-1, 0, 2) = (3, 3, 3)

Vector AC = C - A = (2, 4, 6) - (-1, 0, 2) = (3, 4, 4)

Now, we can write the parametric equation of the plane P as:

P: X = A + t * AB + s * AC

Where X represents a point on the plane, A is one of the given points on the plane (in this case, A = (-1, 0, 2)), t and s are scalar parameters, AB is vector AB, and AC is vector AC.

To find the normal equation of the plane P, we can calculate the cross product of vectors AB and AC. The cross product of two vectors gives us a vector that is perpendicular to both vectors and thus normal to the plane.

Normal vector N = AB x AC

N = (3, 3, 3) x (3, 4, 4)

N = (12, -3, 3)

The normal equation of the plane P can be written as:

12x - 3y + 3z = d

To find the distance from a point Q to the plane P, we can use the formula:

Distance = |(Q - A) · N| / |N|

Where Q is the coordinates of the point, A is a point on the plane (in this case, A = (-1, 0, 2)), N is the normal vector of the plane, and |...| represents the magnitude of the vector.

Let's say the coordinates of point Q are (x, y, z). Plugging in the values, we get:

Distance = |(Q - A) · N| / |N|

Distance = |(x + 1, y, z - 2) · (12, -3, 3)| / [tex]\sqrt{(12^2 + (-3)^2 + 3^2)}[/tex]

Simplifying further, we have:

Distance = |12(x + 1) - 3y + 3(z - 2)| / [tex]\sqrt{162}[/tex]

Distance = |12x + 12 - 3y + 3z - 6| / [tex]\sqrt{162}[/tex]

Distance = |12x - 3y + 3z + 6| / [tex]\sqrt{162}[/tex]

So, the distance from point Q to the plane P is |12x - 3y + 3z + 6| / [tex]\sqrt{162}[/tex].

Learn more about Equation

brainly.com/question/29538993

#SPJ11

The probability of winning the second prize in a 6/53 lottery is equal to the number of favorable outcomes divided by the total number of possible outcomes, which is 1 divided by C(53, 5).

To find the probability of winning second prize in a 6/53 lottery, we need to consider the number of possible outcomes and the number of favorable outcomes. In a 6/53 lottery, there are 53 possible numbers to choose from, and we need to pick 5 of the winning numbers.

The total number of possible outcomes, or the total number of ways to pick 5 numbers out of 53, can be calculated using the combination formula. The formula for combinations is C(n, r) = n! / (r!(n-r)!), where n is the total number of elements and r is the number of elements to be chosen. In this case, n = 53 and r = 5.

The number of favorable outcomes is simply 1, as there is only one set of winning numbers for the second prize.

Therefore, the probability of winning the second prize in a 6/53 lottery is equal to the number of favorable outcomes divided by the total number of possible outcomes, which is 1 divided by C(53, 5).

To obtain the numerical value, you can calculate C(53, 5) and then take the reciprocal of the result.

Please note that the calculations involved can be complex, so it's advisable to use a calculator or computer program for the precise numerical value.

Know more about Lottery here:

https://brainly.com/question/24834093

#SPJ11

The critical value at a significance level of 0.05 for a two-tailed test can be found using the t-distribution with n-1 degrees of freedom.

Since the sample size is 12, the degrees of freedom is 11. Consulting the t-distribution table or using statistical software, the critical value for a two-tailed test at a significance level of 0.05 is approximately ±2.201.

The test statistic for testing the hypothesis H_o: σ = 4.3 against the alternative hypothesis H₁: σ ≠ 4.3 can be calculated using the formula:

t = (s - σ₀) / (s/√n)

where s is the sample standard deviation, σ₀ is the hypothesized standard deviation (4.3 in this case), and n is the sample size. Plugging in the given values, we get:

t = (4.8 - 4.3) / (4.8/√12) ≈ 0.621

To make a conclusion, we compare the absolute value of the test statistic with the critical value. Since |0.621| < 2.201, we do not have enough evidence to reject the null hypothesis.

Therefore, we do not reject the hypothesis that the population standard deviation is equal to 4.3 at a significance level of 0.05.

To know more about critical values, refer here:

https://brainly.com/question/30893665#

#SPJ11